Excise and cess values disabled after saving excise invoice.

Hi,
We have a scenario where we do export under ARE1 form . My issue is as below.
The values BED, ECS, and SECess are now getting captured duting creation of excise invoice J1iin but they turn to 0.00 once i save the excise invoice.
we have created a bond and want to utilize against the bond unable to utilize .
I am able to generate ARE1 also but with zero values which is of no use.
So the exact issue is that table J_1IEXCHDR is not getting updated.
Also i need a confirmation whether during export the values of excise and cess shall be available in both excise invoice and ARE1. Has anyone worked on similar scenario.
Vivek

Hi Vivek,
If the excise values are becoming 0.00 during j1IIN.
You can use the userexit J_1I7_USEREXIT_DUTY_IN_EXPORT and pass the field
SUPPRESS_CALCULATION value as 'X'. This problem will be solved.
Brinda

Similar Messages

Account ID (HKTID) is not updating in MIRO after saving the Invoice

Dear Gurus,
While creating invoice in MIRO I have filled the House bank and Account ID fields in the payment tab. After saving the invoice the House bank is getting updated but the field Account ID is emptied so this account ID is not transmitted to the accounting documents.
Please share your ideas to get the Account ID.
Thanks in Advance
Krishna kumar. M

Hi Mukthar,
Thank you for your reply.
Both House bank and Account ID fields are there in BSEG table and MIRO screen as well. For example I can create manual invoice in F-43 with House bank and Account ID and both are updated in BSEG table. But in MIRO I have problem that document is posting only with House Bank not the Account ID.
In FBZP we have proper house bank configuration settings as well.
Your input is highly appreciated.
Thank you
Krishna kumar.

After saving one invoice through T code vf04, vf04 screen is disappearing a

After saving one invoice through T code vf04, vf04 screen is disappearing and for every invoice, users have to enter again and again. This creates inconvenience to all users and takes a lot of time for invoicing.

hi,
the better way to use VF04 is to create a variant that it cummulates all the billing due documents and be executed via a batch job preferably or do it once.
depending the criteria of the users doing billing, may be different sales areas, document number range etc you can create variants for VF04.
regards
sadhu kishore

Basic Custom duty,CVD and Cess on CVD flows into Excise Invoice instate of BED, ECess on BED and SecECes on BED

Hello Gurus,
One of client having two plants one is DTA Plant and Another one is EHTP Plant(100 % EOU) having 100% EOU licence.Any customer buying from EHTP plant , client is charging Basic custome duty , CVD and CVD Cess .(i.e customer is buying from 100% EOU plant means nothing but importing from different country).
They want all the amounts should hit the BED (Basic Excise Duty) G/L Account and those amounts should flow to excise invoice also.
So can you please help me out how to map this scenario?
@ Please find the below duty structure for more clarification.
Basic Customs duty @
3.75%
CVD @
12.00%
Educatoin Cess on CVD @
2.00%
Secondary & Higher Ed. Cess on CVD @
1.00%
Add:Education Cess on Aggregate duty @
2.00%
Add:Secondary & Higher Ed. Cess on Agg. Duty @
1.00%
Total Duty
Duty Payable @ 100% of the Customs duties
Total :
Additional Duty @2% on all customs duties
Cess @ 1% on all customs duties
Total :
Add VAT @
14.50%
Thanks & Regards
Sujit Mahanty

Hello Lakshmipathi,
Thanks for the reply
i made a pricing procedure where i maintained all the condition types for all the above excise duties.
As i mentioned that all the above duties like Basic custom duty, CVD, Edu cess on CVD , Scnd Higher Edu Cess on CVD will hit to Basis Excise duty (BED) GL account,so to achieve this i maintained same (EXD) account Key what i used for BED.
But i problem is that i am not getting all the duties in the excise invoice document, how to get all the duties in the Excise invoice.
Kindly let me know what to do, to achieve all the duties in the excise invoice document.
Regards
Sujit Mahanty

Values disappear after saving the Purchase Order and Goods Receipt PO

HI,
Our client is using SAP Business One 2007 A(8.00.181) SP 00 PL 47, When they raise Purchase Order for service item, the details and amount disappears automatically after adding the document and similar case for Good Receipt PO. But when they book directly in AP invoice the details and amount will appeared.So please help on solution for the above problem.
Best Regards,
Grayson

Dear Mr Burton,
If I understood correctly you cannot see the information inside the document you added. This made me think that it is a GUI issue.
In the second answer you specified that when you try to open it again you'll receive the error message saying that there is no total value or total and I assume there is no information in the document.
I believe the second issue is a consequence of the first one.
I was suggesting to open a message on the portal (the message that requires the S number from the partners) in order to investigate the issue better.
However, as you have an error message that pinpoints to certain fields it could be possible to see the information in the tables. Do you have this information?
Regards,
Marcella Rivi
SAP Business One Forums Team

Illustrator files containing graphs corrupt and will not open after saving

I have created a series of graphs in illustrator and after saving when I try to reopen them, I get the following error message:
Can't open the illustration. The illustration contains an illegal operand. Offending operator: 1#INF
This happens whatever format the file is saved in.
I am using CC.
Any ideas why and how to prevent it happening in the future?

vnqaa,
If you are saving elsewhere than your own harddisk, that may be the cause. Otherwise, something else has obviously corrupted the files, possibly related to graphs.
One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way.
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error -occurred-pdf2dtp-file-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-ill ustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator -files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html

Why have many of my add-ons and extensions been disabled after switching to firefox 6

Many of my add-ons and extensions have been disabled after switching to Firefox 6.
None of the Java extensions can be used;
my Microsoft frame is disabled;
my media player is gone;
and my google toolbar with all of my important bookmarks is missing.
How can Firefox 6 be considered an "upgrade"?
How can I '''retrieve Firefox 4 or 5'?''--there's no point in using a browser that limits so many necessary add-on sites!

Hi, mhaoo7--
Tried your plugins updating suggestion; no go.
Then tried updating to FF7.
This time the Yahoo! toolbar was no longer compatible with FF.
Scoured sites discussing problems with versions 6 & 7
and decided to retire to version 3.6.19.
Now both Google and Yahoo! toolbars are re-installed and
working....Only deficit may be that FF no longer supports or
soon will not support this version.
I have stashed all of my necessary bookmarks on Google's toolbar;
I like its drop-down menu as it doesn't change the page/window I'm
in the process of using;
I don't want to see that menu listed separately in a new window (too chaotic).
Same for the Google dictionary and Thesaurus, which are straightforward
and easy to use, again requiring nothing more complicated than a drop-down menu
to search for words and concepts.
--I checked Firefox 6 and 7's Dictionary/Thesaurus options but unfortunately
found none.
So if Firefox continues to upgrade with diminished returns, I'll likely have to go
to Google Chrome.
Would rather not do that.
Maybe I can keep FF 3.6.19 without incurring nasty repercussions.
Hope so.
Have enjoyed being with Firefox for a few years.
Thank you for your attention.
marlem388

After saving the invoice, excise values are disappearing in invoice

Hi,
While creating invoice, we have entered all the required conditions and clicked on update button to pick new conditions
then all the invoice values are getting updated.
when we save the invoice and open once again the excise values are disappearing.
net value showing without duty.
even in the printout the excise duty values are not coming.
your inputs & suggestions will be appreciated.
thanks
Regards
Suresh.

This is due to wrong assignment of condition types.

CIN_J1IIN_Basic Excise Duty_Cess_S.Cess Values not Picked

Hi Frens,
During J1IIN, values are not getting picked up for BED, Cess and S.Cess. Can anyone help?
Regards,
CK

There could be many reasons, for not to pick the duty values in J1IIN.
you can check -
- Ist Normal sales / Export - deemed export sales?
- Excise defaults
- Check pricing procedure
- Classify condition types consists Excise condition types
- In invoice- is duty values flowing are not?
similar threads already available in this forum. Hope you will do the search.

Excise and cess

gys
please help me with this .....
like im doing a factory sale 4.7 using taxinn
configured settings for cin....
va01,vl01n.vl02,vf01,j1iin.
i am able to see the excise duty BED against jexp ( % BED ) in order and billing document
but in excise invoice im not able to see the bed .......its 0
let me knw hwere i went wrong im pravctsing this in ides syst in 000 client..
i have the settings for which were earlier posted in this thread but pleazse let me knw how to solve this,.
thanks & regards.

Hi Kiran
Check UTXJ and also see whether Excise Group and Series Group of the respective plant is assigned. Most probably, you would not have assigned Excise Group and Series Group to plant.
Reward me if this helps you.
Regards
G. Lakshmipathi

Excise base amount not updated after creating Excise Invoice

Dear Friends,
The excise base amount is not getting updated in table J_1IEXCDTL u2013 EXBAS. System updates J_1IEXCDTL u2013 EXBAS, if condition category in the Base price condition type is maintained as H.But the problem comes when discounts are applicable.
Say, the base price is Rs 10000 and there is a discount of Rs1000. If I maintain the condition category u2018Hu2019, the excise base value is getting updated as Rs10000, but it should be Rs 9000. But there is no problem with the BED/EDCess/SHEd cess which are calculated as expected based on the steps defined in the pricing procedure.
I even tried using condition type JASS (Acc Seq JDUM -100% on the (Base price - Discount value and condition category H).It works only when JASS is set as Non-statistical.By doing so,Base price and also the Discounts conditions are getting inactive. When JASS is set as statistical, EXBAS is not getting updated.
Thanks
ISaac

Hi Issac,
Use the below user exit to populate the excise base value.
J_1I7_USEREXIT_CALC_EXC_BASE.
This user exit has the KONV strcuture of your billing, you can derevive
the base value and pass it to the parameter EXCITM_BASE so that the exci
se base can be updated during billing.
Thanks and Regards
MBS

Pin login option removed after exchange account was added and is still disabled after removing exchange account

Hi,
I configured my Surface 2 using pin as login option. After that I added my company's exchange account (which has an active sync policy that disables all login types except Windows live password).
But removing my OWA account didn't remove the exchange restrictions. How do I remove them completely?
Thanks in advance.
BR
r3g1m

Hi ,
This issue seems to be related to the active sync policy，the sync policy will persist even though the account has been removed. To solve this iuuse ,we can reset the security policy.
To reset the Security Policies:
Control Panel \User and Family Safety \User Accounts \Reset Security Policies
Here is a link for reference:
Exchange ActiveSync Policy Engine Overview
http://technet.microsoft.com/en-us/library/dn282287.aspx
Best regards

"manually manage music and videos" setting disabled after upgrading iTunes!

Hello every one.
I used to manage my musics and videos manualy , so naturally "manually manage music and videos" check box was always "cheked"
Now after i upgrade my itunes to latest version (11.1.3.8), i find out that option is "Unchecked"!!
So i am not able to copy any music or video or book too my iphon !
If i try to enable that option again, it will clear my libraries and i will lose anything.
Why this happened? what can i do ? any workaround? seems like a bug to me. i didnt do anything just updated my itunes. that option was enabled on my iphone for like 3 years! now i just upgrade my iTunes and that check box is unchecked.
It seems stupid itunes think its another machine and says " it is synced with another library"
Any suggestion please?

Yea, i managed to fix my issue in a wild fashion way But I DONT suggest it to anyone.
I like to hear why it happened after upgrading iTunes and if there is any peaceful solution.
Bythe way, here is how i fixed it :
1-i checked "manually manage music and videos" checkbox and clicked on "Sync" button
2-It showed a threating message that it will erase my music and videos ,......
3-I clicked on OK button and let iTunes do any thing she said , but the second it started to delete my treasures from my iphone, i disconnected my phone by pulling USB cable.
Now i have my musics and videos untouched and got that Option enabled again and i can manage my Music/Videos and Books manually.

Dropdown value clears after saving the form?

I have a pdf form with a couple dropdown lists. If someone selects a value and then saves and reopens the file, the dropdown value is empty.
In other forms I also use dropdown and those do not have this issue. but I cannot find what is wrong with this one. Any suggestions?
I have a custom keystroke script:
if( event.willCommit )
   if(event.value == "")
//if nothing is chosen in "Contract eigenaar" then Dropdown2 will be cleared
     this.getField("Dropdown2").clearItems();
   else
    test(event.value);
And a script:
//Values
myDropdown1Values = ["Maak uw keuze", "Fast Flex B.V.", "QNH Sourcing B.V.", "QNH Consulting Midden B.V.","QNH Consulting Zuid B.V.","QNH Consulting Noord B.V."],
myDropdown7Values = ["Maak uw keuze", "Eigen medewerker", "ZZP-er", "via Leverancier","PDV-er"],
myDropdown8Values = ["","QNH Consulting Midden", "QNH Consulting Zuid", "QNH Consulting Noord", "Young Colfield"],
//Populate
this.getField("Contract eigenaar").setItems(myDropdown1Values);
this.getField("Dropdown7").setItems(myDropdown7Values);
this.getField("Dropdown16").setItems(myDropdown8Values);
// Define what has to be shown in Dropdown2 when value is selected
var DeptData = { "Maak uw keuze": [""],
                 "Fast Flex B.V.": ["","Fast Flex","Klant"],
                 "QNH Sourcing B.V.": ["","QNH Sourcing","Klant"],
                 "QNH Consulting Midden B.V.": ["","Detachering","Project"],
                 "QNH Consulting Zuid B.V.": ["","Detachering","Project"],
                 "QNH Consulting Noord B.V.": ["","Detachering","Project"]
var DeptData2 = { "Maak uw keuze":{ Uitleg1: ""},
                 "QNH Consulting Midden B.V.":{ Uitleg1: "Het verkoopcontract wordt opgesteld tussen QNH Consulting Midden en de eindklant. QNH consulting Midden zorgt voor het contract met de eindklant en voor het contract tussen QNH Consulting Midden en Fast Flex . Het inkoopcontract wordt opgesteld door Fast Flex met de leverancier of ZZP-er. Fast Flex fungeert hier als broker. Er wordt ingekocht volgens de Algemene Inkoop Voorwaarden van Fast Flex. Indien er afwijkende afspraken opgenomen moeten worden in het contract kunnen deze hieronder in het formulier apart worden aangegeven."},
                 "QNH Consulting Zuid B.V.":{ Uitleg1: "Het verkoopcontract wordt opgesteld tussen QNH Consulting Zuid en de eindklant. QNH consulting Zuid zorgt voor het contract met de eindklant en voor het contract tussen QNH Consulting Zuid en Fast Flex . Het inkoopcontract wordt opgesteld door Fast Flex met de leverancier of ZZP-er. Fast Flex fungeert hier als broker. Er wordt ingekocht volgens de Algemene Inkoop Voorwaarden van Fast Flex. Indien er afwijkende afspraken opgenomen moeten worden in het contract kunnen deze hieronder in het formulier apart worden aangegeven."},
                 "QNH Consulting Noord B.V.":{ Uitleg1: "Het verkoopcontract wordt opgesteld tussen QNH Consulting Noord en de eindklant. QNH consulting Noord zorgt voor het contract met de eindklant en voor het contract tussen QNH Consulting Noord en Fast Flex . Het inkoopcontract wordt opgesteld door Fast Flex met de leverancier of ZZP-er. Fast Flex fungeert hier als broker. Er wordt ingekocht volgens de Algemene Inkoop Voorwaarden van Fast Flex. Indien er afwijkende afspraken opgenomen moeten worden in het contract kunnen deze hieronder in het formulier apart worden aangegeven."},
                 "QNH Sourcing B.V.":{ Uitleg1: "Het verkoopcontract wordt opgesteld tussen QNH Sourcing en de eindklant. Het inkoopcontract wordt opgesteld door QNH Sourcing met de leverancier of ZZP-er. Er wordt ingekocht volgens de Algemene Inkoop Voorwaarden van QNH Sourcing. Indien het een nieuwe klant betreft ontvangt QNH Sourcing graag een kopie van het klant contract zodat de inkoopvoorwaarden hierop aangepast kunnen worden. Tevens dient er een kredietcheck te worden uitgevoerd en klantgegevens te worden opgevraagd. Hiertoe ontvang je van ons een formulier klantgegevens."},
                 "Fast Flex B.V.":{ Uitleg1: "Het verkoopcontract wordt opgesteld tussen Fast Flex en de eindklant. Het inkoopcontract wordt opgesteld door Fast Flex met de leverancier of ZZP-er. Er wordt ingekocht volgens de Algemene Inkoop Voorwaarden van Fast Flex. Indien het een nieuwe klant betreft ontvangt Fast Flex graag een kopie van het klant contract zodat de inkoopvoorwaarden hierop aangepast kunnen worden. Tevens dient er een kredietcheck te worden uitgevoerd en klantgegevens te worden opgevraagd. Hiertoe ontvang je van ons een formulier klantgegevens."}};
//Value Dropdown2
function test(cDeptName)
this.getField("Dropdown2").setItems(DeptData[cDeptName]);
this.getField("Text1").value = DeptData2[cDeptName].Uitleg1;

Hi
actually my earlier post was incorrect
i have edited my post
Actually
i want to update only those records that the user has modified
eg
col1 col2 status
1 ABC good
2 PQR good
3 xyz good
4 lmn excellent
5 abcz excellent
is the table before the user modifies
the user goes and modifies multiple records as following
col1 col2 status
1 aaa good
2 PQR good
3 xxx good
4 sss excellent
5 abcz excellent
and the user saves the form
now i want the following output
col1 col2 status
1 aaa new
2 PQR good
3 xxx new
4 sss new
5 abcz excellent
only the modified record's status should be updated
sorry for the earlier lapse

Yaskawa Drives connected to UMI7764 and PXI-7334 Disable after staying idle for about 5 minutes

I have a setup in which I am using PXI-7334 4-Axis controller with UMI-7764 to control 4 Yaskawa SGDV drives. The system has been running fine for about a year now. Recently we started seeing a strange behavior where with the drives enabled if they were left idle (No Motion) all of the 4 drives will disable automatically. Not sure what could be causing this problem. Can anyone help me figure out where the problem could be or what should I look out for.
Thanks
Jigar

Hi Jigar,
What is the version of NI-motion that you are using as well as your operating system you are using? Did anything change with your setup around the time this behavior started occurring?
Something that would also be interested in testing is whether or not this behavior occurs when you have only one of the drives hooked up. Let me know what you find.
Paul M
National Instruments | Applications Engineer | www.ni.com/support

Excise and cess values disabled after saving excise invoice.

Similar Messages

Maybe you are looking for