Excise Base value is missing in ARE1

Hi All,
I am doing Export sale through u201CExports under claim of rebateu201D process, my customer currency is in USD (in CMR), and I have maintained condition record for price in USD, also I have maintained Exchange Rate in OB08.
In ARE1 I could not found u201CExcise baseu201D value (blank), if I maintain the condition record in INR, I could found Excise base value, what could be the reason?
Please suggest me that, how to bring the u201CExcise Baseu201D value in ARE1 if condition record for PR00 is in USD (CMR also maintained with USD)
Regards,
Ram

Hi,
Thank you for ur reply,
I have checked in Table (Excise Invoice Item) J_1IEXCDTL , I could not found "Excise Base" value (no value), but, as I have already mentioned that, if I maintain the condition record for PR00 in INR, then it's updating Excise Base. Is there any solution for this? (if condition record in USD)
For Excise Duties we are doing the round off, this is also affecting while converting the values with Exchange rate i.e.USD to INR. (Differance in values) how to avoide this?
Regards,
Ram

Similar Messages

Very urgent excise base value isnt captured to are1 and are3

dear sir,
in are1 and are3 documents base exicise value is nt being captured and higher edusess 1% too but BED and educess is captured ?can anybody help me ?is ita notes problem?

hi,
for the hiegher education cess not appearing i req u to chek ur pricing procedure if its there in the pricing proceudre and also to check the budget-07 settings also chek if u have checked mark AT1 in excise reg settings. follow--img-log gen-tax on goods mvmnt -india-baisc settings--maintain reg.
for teh secong search on service .sap.com. if you do not find nething tht meets ur need. write to SAP it may be cos of a program error.
saurabh

Excise base value missing in ARE1

Dear Experts,
In ARE1 document, excise base value is not getting picked. BED, Ecess & SHcess are getting updated properly.
Can anyone guide on this issue.
Thanks & Regards,
Rajeshwari

hi
check whether the excise base value in the table J_1IEXCDTL if not then apply this note
Note 1035545 - Excise base amount is not updated in table J_1IEXCDTL.
If the excsie base value is not updating then it wont come in ARE-1 and also check the table J_1IEXITEM for excise base value
regards

Excise base value in ARE1 screen shows 0

Dear Gurus
Even after excise calculation has been made in the excise invoice, Excise base value field from which basic excise duty is calculated is showing 0 value in ARE1 screen while we do J1ia101. other values such as BED, SHC are apperaing. Any ideas??
regards
Sidhu

Hi
Check whether the Excise base value is updating in the table J_1IEXCDTL.
Check the note
Note 1035545 - Excise base amount is not updated in table J_1IEXCDTL.*
regards
Prashanth

Excise base value is not comming to are3 and are1

hi sap gurus
can any one tell me about excise base value is not flowing to are1and are3.

HI
First check your condition types here the condition category should be H. for your base price
Check these SAP notes
1171753 Excise base zero when excise invoice created in background
1035545 Excise base amount is not updated in table J_1IEXCDTL.
regards
Edited by: PRASHANTHgoud on Jul 10, 2009 6:09 PM

Excise Base Value wrong for import

HI expert
i have import po Value is 1000, and my custom duties(inventerised) is 100,2,1.
But when i am doing capturing excise in migo , my excise base value is coming 1100, it must come 1103.
Kindly let me know were i m missing
regard
Nabil

Hi,
check your custom excise invoice check value properly
check your default setting also
Regards
Kailas Ugale

Table J_1IEXCDTL - EXBAS isnt updated -Excise Base Amt not flowing to ARE1

Dear Friends,
This is in continuation to the earlier post.......Excise Duty Base Amount is not flowing into ARE1...Iam here briefing up the earlier post details:
When I am creating ARE-1 for the Exports Excise Invoice, Excise Duty Base Amount is not flowing into ARE1 but BED and other cess conditions are flowing into ARE1
Liable to AT1 and Indicator NCCD is checked and in my pricing procedure NCCD condition is not maintained as its not required.
The latest patch updated in my system is SAPKH600011 (Logistics and Accounting).....
Most importantly the Excise base amount field is not seen in the Excise Invoice but in ARE1 this field is in display mode and Excise base value is not flowing into the Table J_1IEXCDTL field EXBAS.
Someone Pl help me on this issue.
Thanks
Sasi
Edited by: j sasi on Jul 9, 2008 7:13 AM

Sasi,
I think you are making a mistake between manual and mandatory. IN the pricing procedure MAN stands for manual condition and mdt stands for mandatory. Now in the standard, the PR00 is an automatic entry and JASS is a manual and a statistical condition. It is not mandatory. PR00 being the base value for calculation of gross price/nett price it is mandatory.
Most of the customers prefer a manual pricing procedure where PR00, discount, surcharge everything is manual.
In such a case change the appropriate condition type to the manual condition with manual has priority in the settings for condition type.
But here you need to enter the prices and all the conditions manually.
Here you should have only one condition type for pricing condition with the category as basic price. PR00 is normally that condition and so is the P101 which is a Price ( STO). Now if there are several select all others to statistical and only PR00 with an account key assignment to ERL.
Ensure that JASS the assesable value as statistical and manual.
If however you want the JASS as the excise base amount then PR00 will be used for calculation of discounts and and NETT price only but JASS will be the one for Excise base amount.
BAsed on this excise base amount which you will find in the table J_1IEXCHDR the values for BED, ECS and SECS gets calculated.
Either way is O.K but one word of caution. There is an assessable value in the J1ID transaction where you maintain the Assessable value for materials. Its mostly used in TAXINJ. DO not use it or even if that field is filled ensure that you give the JASS assessable value manually at the time of calculating SAles ordr pricing.
If you don;t then there will be an error.
Also check in the analysis whch condition basis value is being taken for calculated in your excise conditions.
This should solve your problem.
Remember calculating assessable value is not a small thing but customers prefer it because reversing excise or paying additional excise is a pain for them. If thats the case then so be it.
But ensure that assessable value is calculated nett of discounts and given there.
In one case I came across where otehr charges, finance charges and transportation were added to the basic price and only on the total excise duty was added and discount was given after calculation of excise duty. Please check your scenario in line with your requirement. Any questions. My pleasure to reply.
regards
Jude

In import process,how excise base value is calculated in MIGO

Hi expert's,
In import process,how excise base value is calculated in MIGO,with what referance values get add to base value.
waiting for your valuable response,
Regards
V.raj

hi,
we Tried with your following reply ! but still not finding exact value in base value .
(MATERIAL PRICE* QTY IN MIGO * EXCHANGE RATE)
thanks & regards
V.Raj

In correct Excise Base Value in Import PO

Dear Experts ,
I have an query on the Excise Base value in Import PO .
The problem is I have made a Import Po , paid the customs duty through MIRO & now when I am doing J1IEX_C wrt to commercial invoice , its showing the Excise base value which is less then the value it should be , the tax amt like Excise BED, AED, Se cess & E cess is getting calculated correctly.
Can somebody tell me where the problem is.
Regards,
DGN 21
Edited by: dgn21 on Dec 3, 2010 6:24 AM

>
dgn21 wrote:
> Dear Jeyakanthan,
>
> As explained earlier after paying to the customs through MIRO, I am doing J1IEX_C, in this transaction, the excise duty is being calculated correctly but the Assessable shown is incorrect.
> I have following condition in schema:
> Gross Price (A):
> Insurance %(B)
> Basic Landing Charges (C):
> Assessable value: (A)(B)(C)
> Basic customs Duty (D)
> CVD (E)
> Ecess on CVD (F):
> S E Cess on CVD (G):
> And then other conditions
>
> Presently the system is calculating the Assessable value as (A) + (D) {i.e. Gross price +Basic Customs duty}, but it should be (A) + (B) +(C).
> Kindly tell me where I need to do the changes so I can get the correct Assessable value as desired.
>
>
> Thanks in advance
Check import pricing procedure calculations in M/08 ?

In MIGO wrong excise base value in import po

Hi,
We have done import PO applied the excise tax code EI, then we try to create MIGO except miro, but in MIGO in we changed the qty for example in PO 100qty and price 100 so total amount is 10000 so we get excise base value is 1000, but now we change the qty in mIGO as 10qty we get same excise base value as 1000 its not calculted.
please suggest me the any config
Thanks
Shital

Hi,
i have test in SAP note u suggested
Excise base defaulted incorrectly at the time of excise invoice capture in the imports scenario with ADC (additional duty of customs) being applicable. The excise duty values are picked from the commercial invoice captured but the excise base value is being calculated incorrectly.
but my scenario is different
Thanks
Shital

Excise Base value calculated wrongly in GR

Dear experts,
When preparing Bought out goods receipt in migo,excise base value is coming wrongly(not as per PO) in sometimes.
If we come back from the screen without saving & then try again. That time the base value is calculating correctly.
This kind of situation is arising inconsistantly. Not regularly.
Please suggest to overcome this issue.
Regards
M.Sarathi

Hi,
When we capture excise invoice in MIGO, SAP will default the excise base value for the total PO quantity.
For eg. if the total PO qty is 100, and if the price is 10 INR, then during MIGO, system will show 100*10 = 1000 INR.
Even if you have posted a partial GR of say 10 nos. already, and you are now trying to post the balance 90 nos in MIGO,
then also, system will suggest the base value as 1000 INR (instead of 900 INR). This is a bug in the excise tab.
Only option is to overwrite the base value manually as per the GR qty.
Regards
Prabhu

Schudling agreement with time dependent excise base value taking wrongly.

Sub: in migo excise base amount is not changing as per the scheduling agreement type LP ( time dependent ).
I have created the scheduling agreement type LP with time dependent.
I have maintained the price value in two validated period i.e
01/07/08 to 31/07/08 price is 100 rs.
01/08/08 to 31/08/08 price is 200 rs.
I have maintained the delivery schedule on
15/07/08 of quantity 1 nos.
When I am doing the goods receipts for the scheduling agreement on
Document date I am giving 15/07/08.
Posting date I am giving 15/07/08.
I am giving the posting date in the excise also 15/07/08.
After item ok.
When I will the excise base value it is taking 200 and also excise duty is also calculating on 200.
When I will post the document
The stock account and GR/IR account is taking 100 only
And excise duty is posting for rs: 200 only
Why the excise base value is not changing as per the validity period.
What setting I have to do the change the excise base value as per the validity date maintained in the time dependent .
regards
jrp

Hi
I was wondering in J1ID there is validity from date only no to date, Pls tell where you have maintained excise base amount based on from to period.
In J1ID if you maintain any new accesable value for the later date it will consider that.
Rgds
Srini

Update Excise base value in MRP based and Non-MRP based billing

Hi Gurus,
We need to update Excise Base Value for Statistical Condition type. How to configure the same ?
Sl.No Pricing Condition Type      Active   Statistical           Passed to Accounting
1        MRP Price (Statistical)
2        Abatement (Statistical)
3       Surcharge (Active&Passed to Accounting)
4      Assessabel value (Statistical)
(No:4 This is the base for calculating Excise duties i.e Excise Base Value)
5       List Price (Statistical)
6       Customer Discount(Statistical)
7      Surcharge(Active&Passed to Accounting)
8      Net Price (Active&Passed to Accounting)
9      BED   (Active&Passed to Accounting)
10    ECess (Active&Passed to Accounting)
11   SECess (Active&Passed to Accounting)
12   Total collected from Customer(Statistical)
Issue: When there is MRP Price higher than the List Price, then the Cutomer will be charged on the basis of Net Price only, but the duties amount to be paid to the government on MRP Price. so in this case I can not calculate Excise Duties on the Actual Net Price condition which is active and passed on to accounting. And always the Excise duties to be calculated on Assessable value(no:4). But that condition type if I make activate then it will pass to accounting and also getting added to the Net Value(KOMP-NETWR). How to come out of this situation.(as per the customer requirement both MRP based materials and non-MRP based materials are also considered in the same sale order i.e with the same pricing procedure).
Becasue of this EXBAS is not getting updated in the J_1IEXCDTL.
Gurus, Share your valuable experiences and suggestions.
Thanks &Regards
Sreekanth
09611147585

Dear Lakshmipathi,
As per your suggestion, I have maintained Material Assessable Value and then also the duty values are calculating on the basis of Assessable value maintained in the Pricing Procedure. It is not taking the Material Assessable Value into consideration. And it is not getting updated the Excise Base Value.
In which case Material Assessable value will be taken into consideration?
How to update the Excise Base Value in J_1IEXCDTL tables?
Thanks&Regards
Sreekanth

Excise base value not updated

Dear all,
We have found that excise base value is not updated after creating excise invoices,later we corrected it,
excise base value started updating in table J_1IEXCDTL,
Intially for 2 months excise base value is not updated in table,
Is there any problem will arise in future ?
or
How to solve this issue ?
Jeyakanthan

Awaiting valuable replies.....
Edited by: Jeyakanthan A on Mar 6, 2010 5:36 PM

Excise base value ZERO in GR for STO

All SAP gurus,
I have created an STO in which my receiving plant is a depot. I have made an outbound delivery, billing and excise invoice from the supplying plant. Now when I am doing the GR through MIGO and entering the Excise Invoice no. it is showing the excise base value as zero while the BED ECS and SECESS value are flowing correctly from the EI. The system gives an error that the excise base is zero.
Can u pls suggest what can be the issue for the same.

Dear Ashish Dhawan,
We are facing a similar problem and would be highly grateful if you could let us know how did the value of material from STO document type UB flow to delivery type NL.
As we are not in position to figure out where excatly the settings needs to be done to make sure the base value along with conditions of STO appears in delivery. Since the delivery value is comming zero, we are not in position to make an excise invoice for the delivery for sending plant by J1IS.
regards,
chetan.

Excise Base value is missing in ARE1

Similar Messages

Maybe you are looking for