Excise base value is not comming to are3 and are1

hi sap gurus
can any one tell me about excise base value is not flowing to are1and are3.

HI
First check your condition types here the condition category should be H. for your base price
Check these SAP notes
1171753 Excise base zero when excise invoice created in background
1035545 Excise base amount is not updated in table J_1IEXCDTL.
regards
Edited by: PRASHANTHgoud on Jul 10, 2009 6:09 PM

Similar Messages

  • Excise base value is not picking for Imports

    Dear All,
         Excise base value is not picking for Imports when doing MIGO and BED/E CESS/S&H E CESS also not picking.
              Please suggest me
    Thanks,
    Tiru

    Hi,
    In case of Imports, you have to define following condiiton types in MM Pricing Procedure;
    JCDB     IN:Basic Custom Duty
    JCV1     IN : CVD
    JECV     IN : Ed Cess on CVD
    J1CV     IN : H&SECess on CVD
    JEDB     IN : Ed Cess on BCD
    JSDB     IN : H&SECess on BCD
    JADC     Addnl Duty of Custom
    These should be created as a delivery cost condition in M/06. And assign the accruals to these in M/08.
    Folowing Gl Accounts will be assigned to those accruals in OBYC;
    CVD Clearing (For accrual of conditions JCV1, JECV, J1CV, JADC) and Customs Clearing (For accrual of conditions JCDB, JEDB, JSDB)
    Now follow the below procedure for Import Purchase;
    1. ME21N u2013 Create Import Purchase Order (Here assign the Vendor of Customs Office to the above mentioned 7 condition types in "Details" of "Conditions")
    2. MIRO u2013 Enter Customs Invoice w.r.t. Import PO (Here select "Planned Delivery Cost" and do LIV for Customs office Vendor, enter values for duties as per Bill of Entry manullay during LIV)
    3. J1IEX u2013 Capture Bill of Entry
    4. MIGO u2013 Goods Receipt against Import PO
    5. J1IEX u2013 Post Bill of Entry
    6. MIRO u2013 Enter Vendor Invoice
    7. MIRO u2013 Enter Clearing Agentu2019s Invoice

  • Excise base value is not changing in MIGO excise tab for Import  PO scenari

    Dear Gururs,
    We are using MIGO to capture & Post Excise Invoice for our Import PO (PO type ZIMP). the problem is, when we change the qty in MIGO Qty tab, corresponding base value is not getting update in Excise tab. we are not creating the planned cost mIRO directly we do the GRN.
    Please suggest a solution.
    Thanks
    Shital

    Hello Shital  ,
    You are using the India Scenario right?
    The issue can be because you have not assigned a zero tax code to the line item. For India please make the tax code field in PO as mandatory so that the user does not save the PO without atleast a zero tax code.
    Maintain the tax code & proceed. You will see the tab in MIGO.
    Regards
    Plauto

  • In ARE1 Excise base value is not appearing.

    Dear All,
    We are using TaxINN,In ARE1 Exise base value is not appearing.
    Please give the inputs
    deepti

    Hi,
         u go to path IMG - Logistics General - Taxes on goods movement - india - Account determination - specify excise accounts per excise transaction
    click new entries button
    ARE1    credit      Cenvat clearing account
    same     same       PLA Bed account
                                RG 23 Bed account
    ARE1      Debit     Cenvat Reversal a/c
    neat go another step
    2.specify g/l account per excise transaction
    ARE1 fieds fillup with G/l accounts rg & condition wise.
    this steps more helpful u
    regards,
    janaki Ram

  • Excise Base Value  is not showing

    Dear SAPPER's,
    At my client side we are using CC 6.0 .When I'm doing Capture of Exise Invoice ( T. Code  : J1IEX_C ) the system is not Showing  Base Exise Value ( J_1IEXITEM-EXBAS ) which should be pick automatically from Purchase Order Base Value.  If i tried to enter manually, system is giving program termination error. I did all configuration settings for Exise . Please let me know where is the major mistake in this ..
    Waiting for your reply
    Thnx & Reg,
    Pavan G Kulkarni

    issue resolved

  • Excise base value not updated

    Dear all,
    We have found that excise base value is not updated after creating excise invoices,later we corrected it,
    excise base value started updating in table J_1IEXCDTL,
    Intially for 2 months excise base value is not updated in table,
    Is there any problem will arise in future ?
    or
    How to solve this issue ?
    Jeyakanthan

    Awaiting valuable replies.....
    Edited by: Jeyakanthan A on Mar 6, 2010 5:36 PM

  • Excise base value missing in ARE1

    Dear Experts,
    In ARE1 document, excise base value is not getting picked. BED, Ecess & SHcess are getting updated properly.
    Can anyone guide on this issue.
    Thanks & Regards,
    Rajeshwari

    hi
    check whether the excise base value in the table J_1IEXCDTL if not then apply this note
    Note 1035545 - Excise base amount is not updated in table J_1IEXCDTL.
    If the excsie base value is not updating then it wont come in ARE-1 and also check the table J_1IEXITEM for excise base value
    regards

  • Schudling agreement with time dependent excise base value taking wrongly.

    Sub: in migo excise base amount is not changing as per the scheduling agreement type LP ( time dependent ).
    I have created the scheduling agreement type LP with time dependent.
    I have maintained the price value in two validated period i.e
    01/07/08 to 31/07/08 price is 100 rs.
    01/08/08 to 31/08/08 price is 200 rs.
    I have maintained the delivery schedule on
    15/07/08 of quantity  1 nos.
    When I am doing the goods receipts for the scheduling agreement on
    Document date I am giving  15/07/08.
    Posting date I am giving 15/07/08.
    I am giving the posting date in the excise  also 15/07/08.
    After item ok.
    When I will the excise base value it is taking 200 and also excise duty is also calculating on 200.
    When I will post the document
    The stock account and GR/IR account is taking 100 only
    And excise duty is posting  for rs: 200 only
    Why the excise base value is not changing as per the validity period.
    What setting I have to do the change the excise base value  as per  the  validity date maintained in the time dependent .
    regards
    jrp

    Hi
    I was wondering in J1ID there is validity from date only no to date, Pls tell where you have maintained excise base amount based on from to period.
    In J1ID if you maintain any new accesable value for the later date it will consider that.
    Rgds
    Srini

  • Excise base amount is not changing as per the scheduling agreement

    Sub: in migo excise base amount is not changing as per the scheduling agreement type LP ( time dependent ).
    I have created the scheduling agreement type LP with time dependent.
    I have maintained the price value in two validated period i.e
    01/07/08 to 31/07/08 price is 100 rs.
    01/08/08 to 31/08/08 price is 200 rs.
    I have maintained the delivery schedule on
    15/07/08 of quantity 1 nos.
    When I am doing the goods receipts for the scheduling agreement on
    Document date I am giving 15/07/08.
    Posting date I am giving 15/07/08.
    I am giving the posting date in the excise also 15/07/08.
    After item ok.
    When I will the excise base value it is taking 200 and also excise duty is also calculating on 200.
    When I will post the document
    The stock account and GR/IR account is taking 100 only
    And excise duty is posting for rs: 200 only
    Why the excise base value is not changing as per the validity period.
    What setting I have to do the change the excise base value as per the validity date maintained in the time dependent .
    regards
    jrp

    dear sir
    doc date and posting date i have given 15/07/08 and also excise posting date i have given 15/07/08,
    but excise base value it is taking Rs:200 .
    in inforecord price date category 5-goods recepit date i have given
    yes i ahve changed the excise base value it will post , if i will not change the excise base  value i will post rs:200 only and GR/IR clearing account will post Rs100 only.
    why the excise base value will not take based on the time dependent.
    regards
    JRP

  • Excise Base value wrong in MIGO

    Hello ,
    PB00 and some Z condition types are used in Pricing Procedure....And Excise is calculted
    on the addition of PBoo+Z condition types, The BED and ECS and SECess is calculted correctly
    While capturing the excise invoice in MIGO
    We are using Ecc 6.0
    While MIGo iam planng to capture the excise Invoice, while in Excise Invoice Tab, iam selecting
    the "only Capture Excise Invoice"(In header)
    In Item level Excise tab... we may see the BED.ECS,SECess  and excise base value
    We are getting the BED and ECS and SECESS  is calculting the values correctly  BUT
    The Excise Base Value showing in the Base value field is wrong... why?
    It is only showing the PB00 value here means PB0O value * Qty.......  Here it is not giving the
    addttion of Z condition types
    But the BED and remaining values are calculated on PB00 and Z condition type.  But why system
    is taking only PB00 value in Base value tab in MIGO.
    Regards
    sapman man

    Hello.
    In this Z conditions are Stastical .... and We are not asigning any Account keys to them.....
    In This case..... while Procurning the material for manufacturing plant..We are get the BED and ECS and SECEss are calculated on ZMRP-ZABT charges....
    He re in our case the BED and ECS and SECess are correct. means it is calculated on ZMRP-ZABT charge...... But In MIGO the Base value shown is worng.... i,e is only showing us the PB00 value(means PB00 X Qty)
    How to get the correct excise base value
    Regards
    Sapman man

  • Updation of Excise Base Value in RG1 Register

    Dear All,
    I have maintained the Condition category as H in Condition Type. But still the Excise Base value is not getting updated in RG1 Register.
    Please help me out with the solution.
    Thanks
    Tanushree

    Hi Tanushree,
    R u working in Ecc 6.0 or in ZYG?
    To update the Excise Base value is in RG1 Register,wat u nid to do is assing Condition category as H.
    Thanks
    Kapil

  • J_1IRG23D Excise Duty Base Value is not Updated

    Hi all,
    while doing the Depot sales after Depot Excise Invoice J1IJ the Excise Duty Base Value is not updated in J1iDEPOTSTOCK1 (display depot stock) and also in table J_1IRG23D.

    hi
    check this SAP Notes
    1348970 Incorrect Ship to / Sold to party filled in J1IJ 11.06.2009
    1322071 RG23D entry deleted from J_1IRG23D in case of cancellations 16.04.2009
    1233836 Additional depot EI status set as 'C' for partial reference 20.03.2009
    1263061 J1IJ - material quantity conversion leads to rounding error

  • Excise Base value calculated wrongly in GR

    Dear experts,
    When preparing Bought out goods receipt in migo,excise base value is coming wrongly(not as per PO) in sometimes.
    If we come back from the screen without saving & then try again. That time the base value is calculating correctly.
    This kind of situation is arising inconsistantly. Not regularly.
    Please suggest to overcome this issue.
    Regards
    M.Sarathi

    Hi,
    When we capture excise invoice in MIGO, SAP will default the excise base value for the total PO quantity.
    For eg. if the total PO qty is 100, and if the price is 10 INR, then during MIGO, system will show 100*10 = 1000 INR.
    Even if you have posted a partial GR of say 10 nos. already, and you are now trying to post the balance 90 nos in MIGO,
    then also, system will suggest the base value as 1000 INR (instead of 900 INR). This is a bug in the excise tab.
    Only option is to overwrite the base value manually as per the GR qty.
    Regards
    Prabhu

  • Update Excise base value in MRP based and Non-MRP based billing

    Hi Gurus,
    We need to update Excise Base Value for Statistical Condition type. How to configure the same ?
    Sl.No  Pricing Condition Type      Active   Statistical           Passed to Accounting        
    1        MRP Price (Statistical)                                                                               
    2        Abatement (Statistical)                                                                               
    3       Surcharge  (Active&Passed to Accounting)
    4      Assessabel value (Statistical)
    (No:4 This is the base for calculating Excise duties i.e Excise Base Value)
    5       List Price (Statistical)                                              
    6       Customer Discount(Statistical)                             
    7      Surcharge(Active&Passed to Accounting)                                                                 
    8      Net Price (Active&Passed to Accounting)                                                                     
    9      BED   (Active&Passed to Accounting)                                                                          
    10    ECess  (Active&Passed to Accounting)                                                                       
    11   SECess  (Active&Passed to Accounting)
    12   Total collected from Customer(Statistical)              
    Issue: When there is MRP Price higher than the List Price, then the Cutomer will be charged on the basis of Net Price only, but the duties amount to be paid to the government on MRP Price. so in this case I can not calculate Excise Duties on the Actual Net Price condition which is active and passed on to accounting. And always the Excise duties to be calculated on Assessable value(no:4). But that condition type if I make activate then it will pass to accounting and also getting added to the Net Value(KOMP-NETWR). How to come out of this situation.(as per the customer requirement both MRP based materials and non-MRP based materials are also considered in the same sale order i.e with the same pricing procedure).
    Becasue of this EXBAS is not getting updated in the J_1IEXCDTL.
    Gurus, Share your valuable experiences and suggestions.
    Thanks &Regards
    Sreekanth
    09611147585

    Dear Lakshmipathi,
    As per your suggestion, I have maintained Material Assessable Value and then also the duty values are calculating on the basis of Assessable value maintained in the Pricing Procedure. It is not taking the Material Assessable Value into consideration. And it is not getting updated the Excise Base Value.
    In which case Material Assessable value will be taken into consideration?
    How to update the Excise Base Value in J_1IEXCDTL tables?
    Thanks&Regards
    Sreekanth

  • Excise base value ZERO in GR for STO

    All SAP gurus,
    I have created an STO in which my receiving plant is a depot. I have made an outbound delivery, billing and excise invoice from the supplying plant. Now when I am doing the GR through MIGO and entering the Excise Invoice no. it is showing the excise base value as zero while the BED ECS and SECESS value are flowing correctly from the EI. The system gives an error that the excise base is zero.
    Can u pls suggest what can be the issue for the same.

    Dear Ashish Dhawan,
    We are facing a similar problem and would be highly grateful if you could let us know how did the value of material from STO document type UB flow to delivery type NL.
    As we are not in position to figure out where excatly the settings needs to be done to make sure the base value along with conditions of STO appears in delivery. Since the delivery value is comming zero, we are not in position to make an excise invoice for the delivery for sending plant by J1IS.
    regards,
    chetan.

Maybe you are looking for