Excise capture in Consignment

Hi Friends,
This is regd. consignment process for Indian scenerio. I want to know when we should capture RG23A Part 1 & Part 2 entry.
The process we are following:
1. Maintain info record for material & vendor
2. Make PO with item cat. "K"
3. Do GR with 101K.
4. Recv.. the material into stock against 201K (or we can recv. material thru 411K then issue material).
5. Do settlement thru MRKO.
In this process can we do part 1 entry in step 3(against 101K) & part2 entry in step 4(against 201K or 411K). But since we are recv. stock as consignment not to our stock can we do part 1. As per excise law can we do like that ?
Regards

Hi,
your question:
In this process can we do part 1 entry in step 3(against 101K) & part2 entry in step 4(against 201K or 411K). But since we are recv. stock as consignment not to our stock can we do part 1. As per excise law can we do like that ?
Answer:
part 1 and part 2 entry are done at the time you make the goods into your stock. goods at consignment are not owned by you.
the liability will be effective only when you withdraw and bring into your stock.
the registers are maintained as a proof of purchasing the excisable goods and being used in production of excisable goods.
you cannot make entry in part 1 at the step no 3.
update your registers when you transfer the goods from vendor consignment into your stock.
Hope it clears your doubt.
Regards
Rajesh

Similar Messages

  • Excise Entries in Consignment posting

    Dear Experts,
    Can you please help me on how are the excise entries captured for a consignment scenario?
    I guess after the settlement is done, customer is liable to pay Excise and Vendor would take the credit. But when I try to post excise invoice I get an error msg  as Please check excise base for the item is zero !.
    Kindly advise on the procedure in SAP.
    Thanks and Regards,
    Manish

    Hello,
    The Consignment process is not supported for Country version India.
    You can not take excise through J1IEX  with refference GR document . The consignment process not supported.
    if you relay want to capture excise invoice for Consignment goods, then  Capture excise Invoice without refference to Purchase order t code J1IEX (option -Without ref to Purchase Order).
    Here enter all the values manualy and capture the excise invoice. System will generate EWPO  excise transaction type , it will same as  GRPO excise transaction type.
    Conclusion: Consignment excise only possible through above said workaround
    Regards
    Mahesh Naik

  • List of pending GR's without excise capturing

    Dear Expertise,
    Dear Experts,
    I need a list of GR documents which are pending for excise capturing.
    we do process like after getting receipts ..MIGO/MIRO/J1ig,,if i forgot J1IG after migo ,how to find the missing GR documents ?
    and i heard a report j1igr which is not fulfill my requirement.could you tell me is any other report to see the pending ?
    Thanks,
    Vinodh

    Hi,
    Report J1ipur does not exists,CIN has limited reports compare to Purchase and Inventory, Make Z report with the  help of technical guy.
    for my last client i made the report since it is not available against material doc
    Regards
    shiva

  • Excise Capture in STO

    There are 2 plants within same co. code. Plant A manufactures parts and Plant B is an assembling unit. Plant A does STO on Plant B. Plant B assembles the parts and make finished goods. Both plants are located in different states and have different Excise registrations.
    Now the issue is that in case of STO, we're following this flow: ME21N (STO, UB)-> VL10B (NL)-> VF01 (Pro forma inv. JEX)-> J1IIN.
    1. First issue: Receiving plant does GRN w.r.t Outbound Delivery (is the reference to Outbound Delivery correct?).
    2. Second issue: Receiving plant does Excise Capturing through t.code J1IEX w.r.t. STO (is the reference to STO correct?).
    3. Third issue: In J1IEX, err is coming: "Maintain Vendor for the Customer XXXXX (code of receiving plant as customer) attached to Supplying Plant XXXX. Message no. 4F115".  How to solve this error?
    Pls advice on these 3 issues.
    Thanks a lot.
    Edited by: R S on Jul 7, 2011 7:56 AM

    Hi R S,
    We follow the below steps in STO process; please check if this helps:-
    u2022     Create Sale Order at Depot Plant u2013 VA01
    u2022     Create Purchase Requisition on Sales Order
    u2022     Create Purchase Order (STO) u2013 ME21N
    u2022     Create Delivery and PGI u2013 VL10B / VL02N
    u2022     Create Pro forma Excise Invoice (billing type JEX) u2013 VF01 (basis of STO delivery)
    u2022     Create Factory Sales Excise Invoice u2013 J1IIN (basis of pro forma excise invoice)
    u2022     MIGO Posting at Depot
    u2022     J1IG Posting to capture excise invoice
    u2022     Create Delivery and PGI u2013 VL01N / VL02N
    u2022     Create Depot Sales Invoice u2013 J1IJ
    u2022     Create Commercial Invoice u2013 VF01
    Regards,
    Palash

  • Excise capture in Debit Memo Process

    Dear Friends,
    I am having a requirement, where, I want to know if the system will capture any excise duties for the debit memo raised for any price escalation.
    Can anybody suggest, if I have to do excise transaction for processing for the debit memo raised.
    Shall be greatful,if the process is explained to me till excise capturing.
    Rgds,
    Indrajit

    Hi,
    For Debit Memo, you can follow this process:
    1. Create the Debit Memo Sales Order against the Billing Invoice which you had already sent to customer.
    2. Then do the Billing against the Debit Memo Sales Order. It will update the values in Customer accounts.
    3. For Excise entries, you need to do the J1IS Transaction. In that transaction, select the
    Doc. Type = OTHR
    Doc. No = Billing No. (You can give any refernce no., but for track record provide the Billing No.)
    Year = Excise Year
    Series Grp = ur wish
    excise grp = ur wish
    Customer = Sold-to-Party in Billing Doc.
    Then click on Add row button, then fill the material details manually. Finally save the document. If in Posting the G/L Accounts are not coming as the required one then you can create one sub-transaction type for the same.
    Regards,
    Vishal

  • EXCISE CAPTURE AND POSTING

    Dear all,
    what are the steps are involved  to activate excise capture and posting at T Code : MIGO.
    Rgs
    mrs

    Hi,
    Before going to capture excise invoice ,you need to configure all the cin configurations .
    here is the cin configuration..
    Check Calculation Procedure
    In this activity, you can check and, if necessary, change existing procedures for tax calculation.
    Standard settings
    Calculation procedures containing the necessary specifications for the calculation and posting of taxes on sales/purchases have already been defined in the standard SAP system for certain countries. Every calculation procedure groups several tax types together into a condition type (for example, output tax or input tax) in the calculation procedure, and determines calculation rules for it.
    The calculation procedure determines for which amount the individual condition types are to be calculated. This can be the base amount (total of the expense items and the revenue items) or a subtotal. The entry in column FrmLvl, determines for which amount tax is calculated.
    Note
    In this activity, the condition types for the check and the possible change provided in the standard system are also displayed. Here, for example, the condition calculation rule, or for which base amount the tax is calculated is determined (= condition type).
    Recommendation
    If possible, do not change the condition types and calculation procedures provided in the standard system. Only check the standard condition types and calculation procedures regarding whether you can use them for your requirements. If necessary, make changes.
    Activities
    If you cannot use the standard settings, change the condition types and calculation procedures delivered to meet your requirements.
    Procedure (pricing, output control, acct. det., costing,...)
    Specifies the conditions that are allowed for a document and defines the sequence in which they are used.
    Example
    Procedures are used, for example, in the following applications:
    · Pricing in sales and distribution
    · Applying overhead in Product Costing (costing sheets) and for CO internal orders
    · Calculating accrued costs in Profitability Analysis
    · Output control (printed confirmations, EDI messages, electronic mail)
    · Account determination
    · Calculating taxes on sales/purchases
    · Calculating accruals in Cost Center Accounting
    · Pricing for resource planning
    Definition: condition type
    Controlling (CO)
    A distinction, in overhead calculation, is made between:
    · Base condition types, which determine the object for which the overhead is to be calculated
    · Overhead condition types, which define the percentage overhead to be applied
    In resource planning, a condition type determines the types of resource prices that are stored in the SAP System. These can be absolute or percentage values, for example.
    Real Estate Management (RE)
    An exact definition of a condition that specifies the amount paid for a specific service.
    Condition types include:
    · Basic rent
    · Advance payment for operating costs
    · Pest control
    Sales and Distribution (SD)
    A characteristic of a condition.
    For example, in pricing, different condition types are used to distinguish between a discount that refers to a net price and a discount that refers to a gross price.
    Treasury (TR)
    A characteristic of a condition used to classify financial transactions.
    Typical examples of condition types are interest, dividends, or full repayment upon maturity. The various parameters specified for the individual condition types determine how the flows are calculated in the cash flow.
    Return ->
    Definition: condition_type
    Condition type
    The condition type is used for different functions. In pricing, for example, the condition type lets you differentiate between different kinds of discount; in output determination, between different output types such as order confirmation or delivery note; in batch determination, between different strategy types.
    Access sequence
    With the access sequence you define
    · the condition tables used to access the condition records
    · the sequence of the condition tables
    · which field contents are the criteria for reading the tables
    Assign Country to Calculation Procedure
    In this activity, you enter the key for the calculation procedure which determines the conditions which are allowed per document and which defines the sequence of the conditions in the document for each country.
    Requirements
    Each calculation procedure which you enter must contain the necessary specifications for calculating and posting the taxes on sales/purchases. For more information on this, read the chapter "Create calculation procedure".
    Activities
    1. Assign a procedure for tax calculation to every country with which your company has business dealings.
    2. Make sure that the corresponding data for calculating taxes is stored for each calculation procedure which you enter here.
    Check and Change Settings for Tax Processing
    In this activity you make the necessary specifications for posting taxes. In doing this you specify under a process key the following indicators:
    · Tax type
    Output tax, input tax, additional taxes, or "not tax-relevant" can be specified as the tax type.
    · Nondeductibility of tax amounts
    For this, tax amounts are marked as not deductible.
    · Posting indicator
    Here you specify whether the tax amount is posted separately or distributed to expense or revenue items.
    · Tax not relevant to cash discount (Not discount relevant)
    This indicator is set only for Canada. If you select it, the system does not take into account the corresponding tax amount when determining the tax base.
    Standard settings
    Process keys with the most important characteristics for tax amounts have already been set in the standard SAP system.
    Recommendation
    Do not change the standard settings. Check whether you can use these process keys for your company, making changes only if necessary.
    Activities
    If you cannot use the standard settings, use new process keys and enter them in your calculation procedure. Do not change the standard SAP process keys.
    Note
    You must make enhancements to the standard settings if you want to specify a new account key in the "Create calculation procedure" activity. You must create and maintain this key beforehand in the "Settings for tax processing" activity.
    Internal processing key
    The internal processing keys are used by the system to determine accounts or posting keys for line items which are created automatically.
    The processing keys are defined in the system and cannot be changed by the user.
    Definition: posting key
    Financial Accounting (FI)
    A two-digit numerical key that determines the way line items are posted.
    This key determines several factors including the:
    · Account type
    · Type of posting (debit or credit)
    · Layout of entry screens
    Return ->
    Definition: posting_key
    Maintain Excise Registrations
    Use
    In this IMG activity, you maintain the data relating to your excise registrations.
    Activities
    Enter each of your excise registrations, specifying a four-character code for each.
    Definition: excise registration
    Financial Accounting (FI)
    An entity in India that is entitled by law to produce any goods liable to excise.
    Each entity is assigned its own excise registration number.
    Every factory that manufactures excisable goods is required to register separately, so that a business with seven factories requires seven registrations.
    Return ->
    Definition: excise registration
    Maintain Company Code Settings
    Use
    In this IMG activity, you maintain the data relating to your company codes.
    Maintain Plant Settings
    Use
    In this IMG activity, you maintain excise information relating to your plants.
    Maintain Excise Groups
    Use
    In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
    Definition: excise group
    Financial Accounting (FI)
    A unit within an excise registration, in India, which keeps its own set of excise records.
    Whereas the excise registration reports to the excise authorities, the excise group is a purely internal organizational unit. Each excise group keeps records of all transactions that have to be reported to the excise authorities. When the time comes to present these records to the authorities, the excise registration compiles the information from all of its excise groups.
    Return ->
    Definition: excise group
    Maintain Series Groups
    Use
    In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
    Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    Activities
    · Define excise series groups based on type of outgoing document
    · Assign series group to excise registration ID
    · If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    · If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
    Example
    You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
    Maintain Excise Duty Indicators
    Use
    In this IMG activity, you maintain the excise duty indicators.
    Maintain Postal Addresses
    Use
    In this IMG activity, you maintain the addresses of various customs and excise organizations that your company deals with.
    You use these addresses in the ARE Documents functions. When you create an ARE-1 or ARE-3, you enter the address of the excise department and the customs department involved in the export process. The system then prints their names and addresses on the AREs.
    You can then define a default local excise department for each excise group and a default customs department for each series group.
    Definition: ARE-1 document
    Logistics - General (LO)
    A form, in India, that companies have to fill out when they remove excisable goods from their manufacturing plants for export.
    The form exempts them from paying excise duty when they remove the goods from their premises.
    Return ->
    Definition: ARE-1 document
    Definition: ARE-3 document
    Logistics - General (LO)
    A form, in India, that allows companies to sell otherwise excisable goods from their premises without paying basic excise duty. The buyer of the goods must be in possession of a deemed export license.
    The ARE-3 states what goods are being removed and which deemed excise license covers it.
    Return ->
    Definition: ARE-3 document
    Maintain Subtransaction Type with Text
    Sub Transaction Type
    Sub transaction type is used for multiple purposes
    Subcontracting:
    It determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
    Excise removals
    Sub transaction type is also used for determining the accounts while doing excise removals.
    With in CIN the account determination is based on the transaction type. So normally you can have a single set of accounts for Excise utilization. In case you need alternate account determination for handling various scenarios you can define sub transaction types. The sub transaction types and corresponding account assignments needs to be maintained in CIN customization
    Select Tax Calculation Procedure
    Use
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
    · If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    · If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
    Definition: condition-based excise determination
    Logistics - General (LO
    A method that the system uses of determining excise duty in India.
    This method requires you to create condition records for each combination of vendor or customer and material (and possibly other conditions).
    When you create a purchasing document, the system calls the tax procedure assigned to India. The tax procedure finds all of the condition records that you have created for that combination of vendor and material.
    When you create a sales document, the excise duties and sales taxes are determined by the pricing procedure (not the tax procedure).
    Return ->
    Definition: condition-based excise determination
    Definition: formula-based excise determination
    Logistics - General (LO)
    A method that the system uses of determining excise duty in India.
    This method was used in the Country Version India Add-On and requires you to maintain additional data in the Excise Rate Maintenance transaction, J1ID.
    When you create a purchasing document, the system calls the tax procedure assigned to India. Each of the excise duties in the tax procedure has its own condition types, and each condition type is assigned to a formula. This formula instructs the system to calculate the excise duty using the data that you have maintained in the Excise Rate Maintenance transaction.
    When you create a sales document, the system determines the excise duties and sales taxes using the pricing procedure (not the tax procedure).
    Return ->
    Definition: formula-based excise determination
    Maintain Excise Defaults
    Use
    In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    Activities
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    · Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    · Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    · Specify the conditions in the sales order that are used for excise rates.
    · Specify the countervailing duty condition type used for import purchase orders.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
    Definition: basic excise duty
    Financial Accounting (FI)
    The main type of excise duty in India.
    It is levied on a wide range of products, for example, foodstuffs, metals, jewellery, leather goods, and machinery.
    Return ->
    Definition: basic excise duty
    Definition: additional excise duty
    Financial Accounting (FI)
    A form of excise duty, in India, levied on a select range of products, for the most part, textiles.
    Return ->
    Definition: additional excise duty
    Definition: special excise duty
    Financial Accounting (FI)
    A form of excise duty in India on a limited number of goods, mostly luxury goods, including pan masala, sparkling waters, furs, and yachts.
    Return ->
    Definition: special excise duty
    Definition: cess
    Financial Accounting (FI)
    In India, a tax on the manufacture of certain products, mostly foodstuffs.
    Return ->
    Definition: cess
    Definition: countervailing duty
    Financial Accounting (FI)
    A form of excise duty imposed on imports that are subsidized by the country in which they were manufactured.
    Countervailing duty (also known as CVD) is intended to make the imports more expensive, thereby redressing any competitive advantage they might have over goods produced locally.
    Return ->
    Definition: countervailing duty
    Define Tax Code for Purchasing Documents
    Use
    In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
    Only carry out this activity if you use condition-based excise determination.
    Activities
    Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Deter
    Sales Tax Code
    The tax code represents a tax category which must be taken into consideration when making a tax return to the tax authorities.
    Tax codes are unique per country. The tax rate calculation rules and further features are stored in a table for each tax code.
    Procedure
    For tax-exempt or non-taxable transactions, you should use tax codes with a 0 percentage rate if the corresponding transactions are to be displayed in the tax returns.
    Note
    You must define new tax codes if tax rates are changed by the state. The old codes with the old tax rates must remain in the system until no more open items which use this tax code exist.
    Definition: tax code
    Financial Accounting (FI)
    A two-digit code that represents the specifications used for calculating and displaying tax.
    Examples of the specifications defined under the tax code are:
    · Tax rate
    · Type of tax (input tax or output tax)
    · Calculation method (percentage included or percentage separate)
    Return ->
    Definition: tax_code
    Definition: tax rate
    Financial Accounting (FI)
    The percentage rate used to calculate the tax amount.
    Return ->
    Definition: tax_rate
    Assign Tax Code to Company Codes
    Use
    In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
    Only carry out this activity if you use condition-based excise determination.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination
    Classify Condition Types
    Use
    In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
    The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
    In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
    · For taxes on purchases, use the condition types contained in the tax procedure.
    · For taxes on sales, use the condition types contained in the pricing procedures.
    Standard settings
    The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
    Use these settings as a basis for your own.
    Maintain Chapter IDs
    Use
    In this IMG activity, you maintain the chapter IDs and the corresponding descriptions as per the schedules published by the Central Board of Excise and Customs.
    Definition: chapter ID
    Logistics - General (LO)
    The number given to a material in the schedules of materials published by the government of India.
    The schedule lists all materials involved in manufacturing, input materials and output materials alike. It shows how much excise duty is levied on each material.
    Each material in the schedule is assigned its own identification code, called "chapter ID."
    Example
    The schedule contains an entry for ceramic roofing tiles, which are liable to basic excise duty at 16%. The chapter ID associated with these tiles is 6903.10.
    Return ->
    Definition: chapter ID
    Assign Users to Material Master Screen Sequence for Excise D
    Use
    In this IMG activity, you customize the material master data so that it shows the information relating to excise duty.
    Standard settings
    Country Version India comes with a screen sequence (IN) that shows the excise duty fields. You have to assign it to each of your users.
    Activities
    1. Double-click User Screen Reference.
    2. Assign all users who need to see the excise duty information to the screen reference IN.
    Example
    Name Screen Reference
    MISHRA IN
    Screen Sequence Number
    Alphanumeric key identifying the screen sequence. The screen sequence defines the sequence of information units in the material master dialog. A screen sequence is made up of data screens. For information on the screen sequences defined in the standard R/3 system, see the IMG documentation Configuring the Material Master.
    Note
    When creating a screen sequence, use an alphanumeric key beginning with the letter Y or Z (customer name range). This key cannot subsequently be changed.
    Dependencies
    You can assign screen sequences to users in the IMG activity Assign Screen Sequences to Users/Material Types/Transactions/Industry Sectors.
    Screen reference depending on the user
    Grouping of users that determines what screens are displayed in accordance with the user master record when you maintain material master records. It also determines the order in which the screens appear.
    Definition: user master record
    User and Authorization Management (BC-SEC-USR)
    Record that contains important master data for a user in the SAP System.
    The user master record contains the assignment of one or more roles to the user. This is how a user menu and the corresponding authorizations for the activities contained in the user menu are assigned to the user. Only users who have a user master record can log on to the system.
    Return ->
    Definition: user_master_record
    Define Form Types
    Use
    In this IMG activity, you define which form types you want to record in the system. You can only use form tracking for the form types that you enter here.
    Example
    · Form type: CT3
    · Form description: Concessional tax form
    · Status: Receive
    Define G/L Accounts for Taxes
    Use
    In this IMG activity, you specify which G/L accounts you will use to record which taxes.
    Requirements
    You have set up G/L accounts for each of the processing keys listed below.
    Activities
    Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
    · VS1 (basic excise duty)
    · VS2 (additional excise duty)
    · VS3 (special excise duty)
    · VS5 (sales tax setoff)
    · MWS (central sales tax)
    · MW3 (local sales tax)
    · ESA (service tax)
    · ESE (service tax expense)
    Specify Excise Accounts per Excise Transaction
    Use
    In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
    If you use subtransaction types, enter the accounts for each subtransaction type as well.
    Activities
    Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
    The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
    Example
    Excise TT DC ind Account name
    GRPO CR CENVAT clearing account
    GRPO CR RG 23 BED account
    GRPO DR CENVAT on hold account
    Specify G/L Accounts per Excise Transaction
    Use
    In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
    When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
    · Excise group
    · Company code
    · Chart of accounts
    Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
    Requirements
    You have already:
    · Defined the G/L accounts
    · Defined the excise groups
    · Maintained the transaction accounts
    Activities
    For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
    Note
    You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
    Define Processing Modes Per Transaction
    Use
    In this IMG activity, you specify which processing modes the user can use in the various Incoming Excise Invoice transactions.
    This way, you can tailor the transaction to what your users have to do.
    Standard settings
    The system comes with three standard transactions relating to the Incoming Excise Invoices function (those that are included in the role SAP_CIN). The processing modes available in these transactions are as follows:
    · J1IEX_C
    This transaction is for excise clerks: users of this transaction can only capture and display excise invoices.
    · J1IEX_P
    This transaction is for excise supervisors: they can change, display, cancel, and post excise invoices.
    · J1IEX
    In this transaction, users can capture and post excise invoices, as well as displaying, changing, and canceling them.
    Activities
    If the standard settings meet your requirements, do not do anything.
    Otherwise, you can adjust the standard settings or you can create your own transactions. To do so:
    1. In Maintain Transaction, create a new transaction by making a copy of one of the standard transactions. Give the new transaction a transaction code of your choice.
    2. In this activity, enter data as follows:
    o Tcode: The transaction code that you have just created.
    o Proc. mode: Specify what the users of the transaction will do with the excise invoices.
    o Active: Select this indicator to activate the setting.
    Example
    You might want to create a transaction that only allows users to display excise invoices.
    Define Reference Documents Per Transaction
    Use
    In this IMG activity, you specify for each combination of transaction and processing mode which reference documents you want the users to be able to use.
    Activities
    If the standard settings meet your requirements, you do not have to do anything.
    Otherwise, add the entries that you need to the table: For each transaction, make one entry per combination of processing mode and reference document. Activate each entry for it to work.
    Definition: excise invoice reference document
    Logistics - General (LO)
    A document, in India, that you refer to when you enter an incoming excise invoice.
    If you have already posted the goods receipt, you can use the goods receipt document as the reference document. Otherwise, you can use the purchase order (or another purchasing document, such as a be a contract or a scheduling agreement).
    Example
    In the SAP System, you create a purchase order for 100 bags of sand and send the order to your vendor. Two weeks later, the vendor delivers the sand, accompanied by an excise invoice.
    When you enter the excise invoice in the system, you specify the number of the original purchase order: this is the reference document.
    Return ->
    Definition: excise invoice reference document
    Maintain Rejection Codes
    Use
    In this IMG activity, you define the rejection codes that are used in the Incoming Excise Invoices transaction.
    Activities
    For each rejection code, enter a code and a description. You can also specify whether the excise duty in the invoice is to be posted to the CENVAT on hold account, instead of the CENVAT clearing account.
    Specify Which Movement Types Involve Excise InvoicesUse
    In this IMG activity, you specify which movement types relating to goods receipts involve excise invoices.
    The system uses this information during the goods receipt procedure. When you post a goods receipt using one of the moevement types that you have specified here, the system prompts you to enter the excise invoice number.
    Note
    This option cannot be used for processing goods receipts without purchase orders.
    Maintain Default Excise Groups and Series Groups
    Use
    In this IMG activity, you specify which excise group and series group you want to appear in these fields by default. You can make separate settings for different combinations of sales organization, distribution channel, division, and shipping point.
    Activities
    This activity is optional, unless you want the system to automatically create outgoing excise invoices when you create a customer invoice.
    In this case, you must also make the appropriate setting in Customizing for Excise Duty, by choosing Basic Subcontracting Attributes
    Use
    The subcontracting attributes help determine conditions for a combination of an excise group, a transaction type, and a subtransaction type.
    The conditions such as the number of excise items per subcontracting challan, if the nonexciseable materials have to be filtered or not when the subcontracting challan is created, the movement type groups for issues and receipts and the hierarchy of determining the excise base value are mentioned here.
    Requirements
    Before you continue with this activity, work through the following activities:
    · Materials Management -> Inventory Management and Physical Inventory -> Goods Issue / Transfer Postings -> Define Screen Layout.
    For the movement type 541, maintain the field Purchase Order as an optional entry or as a required entry.
    · Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Maintain OutputTypes.
    Maintain the output type. On the Default Values tab, maintain the dispatch time and the transmission medium. Maintain the print parameter on the Print tab. This output type has to be maintained in this activity here.
    · Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Assign Forms andPrograms.
    Maintain the Program, FORM routine, and the form for the output type.
    · Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Printer Determination -> Printer Determination by Plant / Storage Location.
    Enter the output device that you use.
    Settings -> Maintain Excise Groups, and selecting Create EI (Create Excise Invoice Automatically).
    Maintain Movement Type Groups
    Use
    In this IMG activity, you group movement types together to form movement type groups.
    Definition: movement type
    Inventory Management (MM-IM)
    A classification key indicating the type of material movement (for example, goods receipt, goods issue, physical stock transfer).
    The movement type enables the system to find predefined posting rules determining how the accounts of the financial accounting system (stock and consumption accounts) are to be posted and how the stock fields in the material master record are to be updated.
    Return ->
    Definition: movement type
    Utilization Determination
    Use
    In this IMG activity, you specify which CENVAT accounts are to be debited by the Fortnight Utilization of CENVAT report: When the report calculates how much excise duty you must remit, it automatically proposes which CENVAT accounts the duty should be debited to. Here, you specify those defaults.
    You can either:
    · Debit all the excise duty to one account
    · Debit the excise duty to more than one account, in which case you specify which percentage is to be debited to each account
    Example
    If you want 50% of basic excise duty (BED) to be debited to the RG 23A account and the remaining 50% to the RG 23C account, you would make the following settings:
    Acct name BED perc.
    RG 23A BED account 50
    RG 23C BED account 50
    Alternatively, to debit all of the BED to the RG 23A account, and then RG 23C account, if there is not enough in the RG 23A account, you would make the following settings:
    Acct name BED perc. +
    RG 23A BED account X
    RG 23C BED account X
    When you come to run the report, the system takes the RG 23A account because it is the first one you have entered. If this account does not cover the BED, the system takes the RG 23C account instead.
    Maintain Minimum Balances for Excise Accounts
    Use
    In this IMG activity, you can maintain minimum balances in your excise accounts. When the balance in these accounts during utilization falls below this level, the system automatically utilizes funds in the PLA account.
    Activities
    Maintain the minimum balance amount for the excise accounts. If you have more than one excise group, you can maintain different minimum balances.
    Specify SAPscript Forms
    Use
    In this IMG activity, for each of your company codes, you specify which SAPscript forms the system prints the excise registers with.
    Standard settings
    Country Version India includes a number of sample SAPscript forms and printing programs, which you can use as follows:
    Reg. name Lay. no. Form Tcode/Prog
    RG 23A Part I 1 J_2IRG23A_PART1 J_2IRAP1
    RG 23C Part I 1 J_2IRG23C_PART1 J_2IRCP1
    RG 23A Part II 1 J_2IRG23A_PART2 J_2IRAP2
    RG 23C Part II 1 J_2IRG23C_PART2 J_2IRCP2
    PLA 1 J_2I_PLA J_2IPLA
    RG 23 D 1 J_2I_RG23D J_2IRG23
    RG 1 1 J_2I_RG1 J_2IRRG1
    RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
    RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
    RT 12 1 J_2I_RT12_3 J_2IRT12
    The layout description can be left blank or an appropriate description maybe filled in. You may not change the register name. You can have your own layouts and maintain the name here. If the output device and number of copies are maintained it is automatically picked up for printing.
    Number Ranges
    You can maintain the number ranges for all CIN Number range objects using this transaction
    Activities
    Please maintain the number ranges for the folllowing objects The no nr has to be '01' for all
    1. j_1iintnum
    At an Excise group
    1. j_1irg23a1
    2. j_1irg23a2
    3. j_1iRG1
    4. j_1irg23c1
    5. j_1irg23c2
    6. j_1ipla2
    7. j_1iintpr2
    8. j_1irg23d
    9. j_1irg1_t ( material level)
    10. j_1iconpla ( if Consolidated PLA is used )
    At Series group
    1. j_1iexcloc
    2. j_1iexcexp
    3. j_1idepinv
    4. j_1i57Fc ( 57F Challans
    After configuring cinraise the po aganst the material which is lliable to excise.
    in migo enter the po number...select the ok indicator and click check button
    now can observe excise tab in the header
    enter excise invoice no and date.
    now post the goods reciept.
    according to configuration settings in excise tab it gives whether excise inoice is saving when you posting migo .if invoice is only saving
    go to j1iex_p tc and post the excise invoice.
    hope your dubt is clearded.
    regards
    venkat

  • Import PO-MIRO-GR & Excise Capturing

    In case of doing GR through Goods movement BAPI, I am not able to capture Excise details. We were using BDC to do GR along with Excise capture. Since that was giving numerous BDC errors, we are trying with Goods movement BAPI. Unfortunately we are unable to capture the excise details. Can anyone help me on this. (Even I tried J1iEX - BDC for the same & my excise duty data is not getting populated when i tried the same (Excise capture with GR)). Please help me.

    Hi.
    1.  Custom vendor XK01  create assign recon. account. while creating PO in condition tab . select the condition type display the condition for duties there have option to enter the vendor code. you can automate through access seq. assign to all duties condition type and maintain condition record.
    2. MIRO select planned deivery cost.
    Custom Clearing Dr.
    Custom Payable Cr
    3. Yes, you can verify seperately.
    4.Yes, through selection of option in MIRO ---<> planned delivery cose    or   goods serivices
    5. point 1 refer.
    6. J1ID in vendor details.
    7.
    8. Item details you see the amount.
    9. Check you setting on tax on ggods movement . have you enter all the condition type & G/L a/c
    10. Tax pricing procedure --> condition type --> you maintain the accurals & acount key. the acct key have G/l a.c.
    11. Point 1
    12. J1IEX  display mode.
    SAM

  • Excise Captured in Base Currency needed in local currency

    Hi All,    
    In MIGO Excise Capture is done but the Base Currency is coming for BED, AED, ECS and SECess. I need it in local currency. The Base Value is in Local currency. Any thing has to be updated Functionally.
    Thanks in Advance,
    Sapuser

    This has been taken Care. Over here while capturing the commercial Invoice I have given the current year it must be physical year.

  • Report - GR for which Excise Capture & Posting are pending

    Hi,
    The scenario for Goods Receipts for Excisable Materials is as follows:
    1. GR done by stores
    2, Excise Capture done by Excise Clerks
    3. Excise Posting done by Excise Supervisor
    Is there any report through which we can monitor the following:
    a. GR done and pending for Excise Capture
    b. Excise Capture  done and pending for Excise Posting
    Please guide
    Regards,

    Thanks for the reply.
    I am exploring the T Code J1IGR; the report name says "List of GR's without Excise Invoice".
    I am able to view the GR Documents which I have posted.
    My doubt is : will it show the GR Documents for all Materials or only excisable materials. I
    I am exploring J1i7  to know what all can I get from here.
    Regards,

  • Excise capturing during Tcode-MIGO

    Currently the Excise Invoice is captured through J1IEX for the entire quantity, the captured Excise invoice is then referred to in the MIGO screen while posting the GR. In the GR; the entire quantity received; is split into multiple batches by giving manual batch numbers. Along with this the Excise duties captured for the complete quantity also gets distributed proportionately as per the batch quantities.
    Now client requirement is in order to save time by reducing one step of excise capturing through J1IEX; we wish to adopt the process of capturing the Excise duties in the MIGO screen itself.How to do this.
    Secondly it is observed that on splitting the complete quantity as per the Batches the Excise Duties are not getting distributed as per individual batch quantity.What can be the probable reason for this.

    Hi,
    If you want excise to be capture at MIGO, you need to do following settings:
    Select boxes of "EI capture" & "Post EI in MIGO" in MIGO Settings segment in Maintaining Excise Group setting in following path:
    SPRO -- >Logistics general -- > tax on Goods Movements-- >India -- >Basic setting -- >Maintain Excise Groups
    Also set entry of 101 MT for capturing Excise in following path:
    SPRO -- >Logistics general -- > tax on Goods Movements-- >India -- >Business Transactions-- >Specify Which Movement Types Involve Excise Invoices
    Regards,
    Biju K

  • ONE PO - THREE EXCISE CAPTURES

    THIS IS WITH REGARD TO EXCISE CAPTURE. WE PLACED AN ORDER FOR A PUMP SET. THE SUPPLIER SEND THIS ASSEMBLED ITEM WITH ONE INVOICE AND 3 DIFFERENT PARTIES ,3 DIFFERENT EXCISE MODVATS. I MADE PO WITH UOM OF 1 NO. NOW FOR THIS GRN HOW CAN I AVAIL ALL THREE EXCISE INVOICES AGAINST THIS PO? PLEASE HELP ME IN THIS REG.
    NAAGSEKHAR

    Hi,
    It will be better, if you capture the INVOICE sent by your Vendor (PUMP Supplier) and club all the duties of 3 Parties and post in the single Excise Invoice.
    Because system will not allow you to take credit of all the 3 invoices.

  • Physical Inventory stock Excess/Short excise capture in steps plz

    Dear Gurus,
    Pls guide me step by step excise capture for physical inventory stock for raw material and finished material.
    Kindly give the steps till register extraction.
    regards,
    Kumar

    Hi Kumar
    Welcome to SCN forum
    Please refer this link which may help you
    EXCISE CAPTURE AND POSTING
    NOTE: Before posting any issue, kindly search in the forum
    Regards
    Srinath

  • Excise capture at depot

    hi,
    As we know, we have to use J1IG for excise capture and J1IJ  for  exicse print for all goods movement  form depot to plant .
    My question is while doing J1IG which register/table will get update relevant excise portion, since RG23D have only quantity field.
    reg
    mrs

    yes Only RG23D will be updated..
           as u r not taking any credit value will not update...
             u r just passing the credit to the customer while sales...
    u have a report Just check J1IDEPOTSTOCK1..
        U  will get all details

  • J1IEX - Excise capture / Post entries

    Dear All,
    I want to write a validation for making the decimal values even during J1IEX - Excise capture / Post entries.
    Please guide me to the badi /enhancement for writing the validation.
    Edited by: goenkavishal on Jun 8, 2011 1:20 PM

    Hi Venkat,
    Check whether the remaining items are excisable or not. If they are not exicisable it will not be captured.
    regards
    Anand.C

  • Excise capturing double the time

    hi
    when capturing the excise in the j1is the excise capturing the two times
    (for rejection GR thru' return PO)
    one document is generating as GRPO and other is generating in the others
    how to avoid this
    K.Raghuram

    Check the folloeing settings
    OBBG- Is the tax procedure is assigned to Country?
    ME23N- Is the tax code is given in purchase order?
    Check if tax code is assigned to compnay code in IMG.
    J1ID- Maintain Chapter id -material combination
          -maintain assessable value
          -maintain cenvat determintaion
         Maintain Vendor excise details
    Regards.

Maybe you are looking for

  • Need to upgrade my MacBook from Snow Leopard.  Should I go straight to Yosemite?

    I am a nervous person. The idea of upgrading always fills me with dread. I have way too much to do, to have computer problems. Yet my MacBook is getting sluggish (I can type faster than the words show up, now). It's probably because I still run 10.6.

  • Image Sequence in Quicktime Pro

    Can anyone here please tell me where there is a tutorial on how to import an image sequence and then export it as a quicktime movie for the web? I am overwhemed with all of the settings in QuickTime Pro and I need some help sorting it all out, which

  • How do I set up my HP psc2175xi all in one printer for wireless printing or network printing?

    How do I set up my HP psc2175xi all in one printer for wireless printing or network printing? I am changing the set up of my home computer to add another computer. I would like to go wireless from my computers to the hub and wired from the hub to my

  • Apple's "My Network"

    Is the My Network category under the Network browse function in a Finder window populated by Bonjour detection? Is there a way to turn the My Network feature on and off? My Intel Mac has it but my PPC G4 doesn't, both running 10.4.8 with all updates.

  • Phantom icons

    I have a recurring issue that I can't get rid of. The list of files displayed in the Download folder icon in the Dock includes files that are displayed twice. Even if I delete the files altogether, one occurrence of each file keeps showing up in the