Excise capturing without po
hi gurus
how can we capture and post the excise without po
plz let me know the steps
plz help
answers will be rewarded
Hi,,
Use T.code : J1IX for excise posting without P.O
G.Ganesh Kumar
Similar Messages
-
Excise capturing without base value
Dear CIN Gurus,
There is a very specific scenario for which I need your help. We have Lump Sum Turnkey Contracts where the vendor gives a ceiling excise amount for which he will give the excise invoice. This ceiling excise amount has no base value on which it can be calculated. The excise invoices given by the vendor will be from the third party who is the material supplier for the contract completion. Please suggest me a way where I can capture the part 1 entries as well as posting of excise invoice.
Regards,
Ashish Dhawan
9990800147Do this in J1iex with out PO.
There u can maintain every thing. Both Part1 & Part2 Will be updated.
Biswajit -
Excise capturing without part numbers
Dear all,
For the part numbers which are not created, can we capture the excise duties. If yes, how it can be done?
Thanks & Regards,
arDear pankaj singh,
Thanks a lot for your reply. In J1ID, I have maintained whatever u said. Now please tell me how to create a PO for that. When i create a PO, it is asking for material. when i give Account assignment as K then it is not asking for material, but the excise values are not getting calculated.
Please suggest.
Thanks & Regards,
AR -
Excise Invoice of Captured without PO can't be canceled with J1IEX
Dear all,
I entered the EWPO(Excise Invoice Without PO) from J1IEX transaction with processing mode "A01 Capture Excise
Invoice" and reference document "R06 Without Purchase Order".
But when I cancel it from same transaction, the error below has occurred.
"Excise invoice xxx has already been posted for vendor XXX."
And I couldn't cancel it from J1IS or J1IH transaction, too.
Do you know how to cancel it?
When I asked it to OSS, their answer was as following.
Answer of person in charge 1.
You have to reverse Part 2 with J1IH transaction, and cancel Part 1 with J1I5 transaction.
->(My confirmation result)
But on the EWPO screen, there are no fields to input the material document number.
So I couldn't cancel Part 1 portion from J1I5.
Answer of person in charge 2. (escalated from person 1)
You can continue the cancellation from J1IEX with pressing enter key, ignore a message.
->(My confirmation result)
As that operation result, Excise Invoice "0000000000" was created with status "B" separately.
But ,, when a new posted EWPO was canceled, the Invoice "0000000000" described above was overwritten.
This method was not able to be used.
Answer of person in charge 3. (escalated from person 2)
You always have to register a Excise invoice from MIGO transaction.
If you want to receive goods without PO, you can use movement type 501.
And if you register a Excise invoice from J1IEX directly, you can't cancel the EI Part 1.
There are only two ways to cancel the part1
1. By cancelling the material document.
2. By using the J1I5 transaction
The material document is necessary in each case.
The current EWPO function of direct J1IEX is useless.
->(My confirmation result,,,)
So, what is the EWPO function of below?
"J1IEX transaction with processing mode "A01 Capture Excise Invoice" and reference document "R06 Without Purchase Order"
Best regards,
IwanaDear Padmasri ,
Thank you for your reply.
But,,, as you wrote, that is normal case with PO and GR.
I know that normal process well.
I'm asking about EWPO(Excise Invoice Without PO) case.
As I wrote, EWPO is registered directly from a J1IEX transaction.
(with processing mode "A01 Capture ExciseInvoice" and reference document "R06 Without Purchase Order")
The above-mentioned error occurs the Post mode of J1IEX, or Cancel mode, and cancellation of the Excise Invoice is impossible.
And, since there is no field to input material document number on the screen of J1IEX in that case, a link is not made even GR has posted.
We would like to apply this EWPO to the material which does not manage stocks.
(We would like to deal with only the payment of the expense to a vendor, and the payment of Excise.)
Best regards,
Iwana -
List of pending GR's without excise capturing
Dear Expertise,
Dear Experts,
I need a list of GR documents which are pending for excise capturing.
we do process like after getting receipts ..MIGO/MIRO/J1ig,,if i forgot J1IG after migo ,how to find the missing GR documents ?
and i heard a report j1igr which is not fulfill my requirement.could you tell me is any other report to see the pending ?
Thanks,
VinodhHi,
Report J1ipur does not exists,CIN has limited reports compare to Purchase and Inventory, Make Z report with the help of technical guy.
for my last client i made the report since it is not available against material doc
Regards
shiva -
Excise capture during MIGO for domestic purchase
Dear Gurus,
I thank the forum members for posting lot of suggestions on the captioned subject. After referring to all of them and making
the necessary customization in ECC6 for TAXINN, I have come across some problems and request you to give your
valuable suggestions. While doing MIGO, I get a popup for Commercial Invoice No. and date and after filling them alongwith delivery challan no. etc, the excise invoice tab is not opening in the MIGO screen. However, the GR document is posted
without errors. When I try to create Excise Invoice through J1IEX, the system pops up for commercial invoice number.
For capturing excise against purchase order, the system gives the message that the commercial invoice has not been
created when I give the commercial invoice number given in MIGO. Whereas, when I give material document number for GR reference, the screen for excise opens without any excise duty values. When I try to input the values manually and press enter, the values goes off and I could not proceed.
Thanks in advance for valuable suggestions ASAP.
SadashivanThanks to BUDV/Naveen/Subham for the prompt reply. I made the changes to capture and post EI in MIGO in excise group settings and removed the CVD conditions in calculation schema and now the commercial invoice pop is not coming. But during MIGO in this process, the client wants to capture the BED, AED, SED automatically. When the Excise Invoice tab opens in MIGO, it is blank although the Base amount is shown from the assessable value given in J1ID. They does not want to enter the BED,AED, SED field manually in the warehouse doing the GRN transaction. The rate has been given for condition types in FV11 which comes as taxes in Invoice tab. But the same rate is not linked in Excise invoice tab in MIGO. Can you please enlighten me where to make the relative settings for automatic calculation of BED, AED, SED, Cess based on assessable value during MIGO?
Thanks in advance.
Best Regards,
Sadashivan -
Excise capture in customer return
HI,
For customer return we are useing J1IEX Transaction for capturing excise invoice, without purchase order document type.
But in J1IEX,there is a field for Vendor.
I want to know that in above case, who will be the Vendor?
Regards
PrabudhDear Lalit,
Instead of J1IEX, you can use Excise JV route through Transaction Code: J1IH. In Transaction Code: J1IH, you have the option of both adding to excise duty value & also if you want to reduce you can do so, by selecting appropriate option like additional / others, etc. You have the option of both linking it to material or also without linking it to material.
Regards,
Rajesh Banka -
Dear all,
what are the steps are involved to activate excise capture and posting at T Code : MIGO.
Rgs
mrsHi,
Before going to capture excise invoice ,you need to configure all the cin configurations .
here is the cin configuration..
Check Calculation Procedure
In this activity, you can check and, if necessary, change existing procedures for tax calculation.
Standard settings
Calculation procedures containing the necessary specifications for the calculation and posting of taxes on sales/purchases have already been defined in the standard SAP system for certain countries. Every calculation procedure groups several tax types together into a condition type (for example, output tax or input tax) in the calculation procedure, and determines calculation rules for it.
The calculation procedure determines for which amount the individual condition types are to be calculated. This can be the base amount (total of the expense items and the revenue items) or a subtotal. The entry in column FrmLvl, determines for which amount tax is calculated.
Note
In this activity, the condition types for the check and the possible change provided in the standard system are also displayed. Here, for example, the condition calculation rule, or for which base amount the tax is calculated is determined (= condition type).
Recommendation
If possible, do not change the condition types and calculation procedures provided in the standard system. Only check the standard condition types and calculation procedures regarding whether you can use them for your requirements. If necessary, make changes.
Activities
If you cannot use the standard settings, change the condition types and calculation procedures delivered to meet your requirements.
Procedure (pricing, output control, acct. det., costing,...)
Specifies the conditions that are allowed for a document and defines the sequence in which they are used.
Example
Procedures are used, for example, in the following applications:
· Pricing in sales and distribution
· Applying overhead in Product Costing (costing sheets) and for CO internal orders
· Calculating accrued costs in Profitability Analysis
· Output control (printed confirmations, EDI messages, electronic mail)
· Account determination
· Calculating taxes on sales/purchases
· Calculating accruals in Cost Center Accounting
· Pricing for resource planning
Definition: condition type
Controlling (CO)
A distinction, in overhead calculation, is made between:
· Base condition types, which determine the object for which the overhead is to be calculated
· Overhead condition types, which define the percentage overhead to be applied
In resource planning, a condition type determines the types of resource prices that are stored in the SAP System. These can be absolute or percentage values, for example.
Real Estate Management (RE)
An exact definition of a condition that specifies the amount paid for a specific service.
Condition types include:
· Basic rent
· Advance payment for operating costs
· Pest control
Sales and Distribution (SD)
A characteristic of a condition.
For example, in pricing, different condition types are used to distinguish between a discount that refers to a net price and a discount that refers to a gross price.
Treasury (TR)
A characteristic of a condition used to classify financial transactions.
Typical examples of condition types are interest, dividends, or full repayment upon maturity. The various parameters specified for the individual condition types determine how the flows are calculated in the cash flow.
Return ->
Definition: condition_type
Condition type
The condition type is used for different functions. In pricing, for example, the condition type lets you differentiate between different kinds of discount; in output determination, between different output types such as order confirmation or delivery note; in batch determination, between different strategy types.
Access sequence
With the access sequence you define
· the condition tables used to access the condition records
· the sequence of the condition tables
· which field contents are the criteria for reading the tables
Assign Country to Calculation Procedure
In this activity, you enter the key for the calculation procedure which determines the conditions which are allowed per document and which defines the sequence of the conditions in the document for each country.
Requirements
Each calculation procedure which you enter must contain the necessary specifications for calculating and posting the taxes on sales/purchases. For more information on this, read the chapter "Create calculation procedure".
Activities
1. Assign a procedure for tax calculation to every country with which your company has business dealings.
2. Make sure that the corresponding data for calculating taxes is stored for each calculation procedure which you enter here.
Check and Change Settings for Tax Processing
In this activity you make the necessary specifications for posting taxes. In doing this you specify under a process key the following indicators:
· Tax type
Output tax, input tax, additional taxes, or "not tax-relevant" can be specified as the tax type.
· Nondeductibility of tax amounts
For this, tax amounts are marked as not deductible.
· Posting indicator
Here you specify whether the tax amount is posted separately or distributed to expense or revenue items.
· Tax not relevant to cash discount (Not discount relevant)
This indicator is set only for Canada. If you select it, the system does not take into account the corresponding tax amount when determining the tax base.
Standard settings
Process keys with the most important characteristics for tax amounts have already been set in the standard SAP system.
Recommendation
Do not change the standard settings. Check whether you can use these process keys for your company, making changes only if necessary.
Activities
If you cannot use the standard settings, use new process keys and enter them in your calculation procedure. Do not change the standard SAP process keys.
Note
You must make enhancements to the standard settings if you want to specify a new account key in the "Create calculation procedure" activity. You must create and maintain this key beforehand in the "Settings for tax processing" activity.
Internal processing key
The internal processing keys are used by the system to determine accounts or posting keys for line items which are created automatically.
The processing keys are defined in the system and cannot be changed by the user.
Definition: posting key
Financial Accounting (FI)
A two-digit numerical key that determines the way line items are posted.
This key determines several factors including the:
· Account type
· Type of posting (debit or credit)
· Layout of entry screens
Return ->
Definition: posting_key
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
Enter each of your excise registrations, specifying a four-character code for each.
Definition: excise registration
Financial Accounting (FI)
An entity in India that is entitled by law to produce any goods liable to excise.
Each entity is assigned its own excise registration number.
Every factory that manufactures excisable goods is required to register separately, so that a business with seven factories requires seven registrations.
Return ->
Definition: excise registration
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Definition: excise group
Financial Accounting (FI)
A unit within an excise registration, in India, which keeps its own set of excise records.
Whereas the excise registration reports to the excise authorities, the excise group is a purely internal organizational unit. Each excise group keeps records of all transactions that have to be reported to the excise authorities. When the time comes to present these records to the authorities, the excise registration compiles the information from all of its excise groups.
Return ->
Definition: excise group
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
· Define excise series groups based on type of outgoing document
· Assign series group to excise registration ID
· If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
· If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
Maintain Excise Duty Indicators
Use
In this IMG activity, you maintain the excise duty indicators.
Maintain Postal Addresses
Use
In this IMG activity, you maintain the addresses of various customs and excise organizations that your company deals with.
You use these addresses in the ARE Documents functions. When you create an ARE-1 or ARE-3, you enter the address of the excise department and the customs department involved in the export process. The system then prints their names and addresses on the AREs.
You can then define a default local excise department for each excise group and a default customs department for each series group.
Definition: ARE-1 document
Logistics - General (LO)
A form, in India, that companies have to fill out when they remove excisable goods from their manufacturing plants for export.
The form exempts them from paying excise duty when they remove the goods from their premises.
Return ->
Definition: ARE-1 document
Definition: ARE-3 document
Logistics - General (LO)
A form, in India, that allows companies to sell otherwise excisable goods from their premises without paying basic excise duty. The buyer of the goods must be in possession of a deemed export license.
The ARE-3 states what goods are being removed and which deemed excise license covers it.
Return ->
Definition: ARE-3 document
Maintain Subtransaction Type with Text
Sub Transaction Type
Sub transaction type is used for multiple purposes
Subcontracting:
It determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
Excise removals
Sub transaction type is also used for determining the accounts while doing excise removals.
With in CIN the account determination is based on the transaction type. So normally you can have a single set of accounts for Excise utilization. In case you need alternate account determination for handling various scenarios you can define sub transaction types. The sub transaction types and corresponding account assignments needs to be maintained in CIN customization
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
· If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
· If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Definition: condition-based excise determination
Logistics - General (LO
A method that the system uses of determining excise duty in India.
This method requires you to create condition records for each combination of vendor or customer and material (and possibly other conditions).
When you create a purchasing document, the system calls the tax procedure assigned to India. The tax procedure finds all of the condition records that you have created for that combination of vendor and material.
When you create a sales document, the excise duties and sales taxes are determined by the pricing procedure (not the tax procedure).
Return ->
Definition: condition-based excise determination
Definition: formula-based excise determination
Logistics - General (LO)
A method that the system uses of determining excise duty in India.
This method was used in the Country Version India Add-On and requires you to maintain additional data in the Excise Rate Maintenance transaction, J1ID.
When you create a purchasing document, the system calls the tax procedure assigned to India. Each of the excise duties in the tax procedure has its own condition types, and each condition type is assigned to a formula. This formula instructs the system to calculate the excise duty using the data that you have maintained in the Excise Rate Maintenance transaction.
When you create a sales document, the system determines the excise duties and sales taxes using the pricing procedure (not the tax procedure).
Return ->
Definition: formula-based excise determination
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
· Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
· Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
· Specify the conditions in the sales order that are used for excise rates.
· Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
Definition: basic excise duty
Financial Accounting (FI)
The main type of excise duty in India.
It is levied on a wide range of products, for example, foodstuffs, metals, jewellery, leather goods, and machinery.
Return ->
Definition: basic excise duty
Definition: additional excise duty
Financial Accounting (FI)
A form of excise duty, in India, levied on a select range of products, for the most part, textiles.
Return ->
Definition: additional excise duty
Definition: special excise duty
Financial Accounting (FI)
A form of excise duty in India on a limited number of goods, mostly luxury goods, including pan masala, sparkling waters, furs, and yachts.
Return ->
Definition: special excise duty
Definition: cess
Financial Accounting (FI)
In India, a tax on the manufacture of certain products, mostly foodstuffs.
Return ->
Definition: cess
Definition: countervailing duty
Financial Accounting (FI)
A form of excise duty imposed on imports that are subsidized by the country in which they were manufactured.
Countervailing duty (also known as CVD) is intended to make the imports more expensive, thereby redressing any competitive advantage they might have over goods produced locally.
Return ->
Definition: countervailing duty
Define Tax Code for Purchasing Documents
Use
In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities
Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Deter
Sales Tax Code
The tax code represents a tax category which must be taken into consideration when making a tax return to the tax authorities.
Tax codes are unique per country. The tax rate calculation rules and further features are stored in a table for each tax code.
Procedure
For tax-exempt or non-taxable transactions, you should use tax codes with a 0 percentage rate if the corresponding transactions are to be displayed in the tax returns.
Note
You must define new tax codes if tax rates are changed by the state. The old codes with the old tax rates must remain in the system until no more open items which use this tax code exist.
Definition: tax code
Financial Accounting (FI)
A two-digit code that represents the specifications used for calculating and displaying tax.
Examples of the specifications defined under the tax code are:
· Tax rate
· Type of tax (input tax or output tax)
· Calculation method (percentage included or percentage separate)
Return ->
Definition: tax_code
Definition: tax rate
Financial Accounting (FI)
The percentage rate used to calculate the tax amount.
Return ->
Definition: tax_rate
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
· For taxes on purchases, use the condition types contained in the tax procedure.
· For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
Maintain Chapter IDs
Use
In this IMG activity, you maintain the chapter IDs and the corresponding descriptions as per the schedules published by the Central Board of Excise and Customs.
Definition: chapter ID
Logistics - General (LO)
The number given to a material in the schedules of materials published by the government of India.
The schedule lists all materials involved in manufacturing, input materials and output materials alike. It shows how much excise duty is levied on each material.
Each material in the schedule is assigned its own identification code, called "chapter ID."
Example
The schedule contains an entry for ceramic roofing tiles, which are liable to basic excise duty at 16%. The chapter ID associated with these tiles is 6903.10.
Return ->
Definition: chapter ID
Assign Users to Material Master Screen Sequence for Excise D
Use
In this IMG activity, you customize the material master data so that it shows the information relating to excise duty.
Standard settings
Country Version India comes with a screen sequence (IN) that shows the excise duty fields. You have to assign it to each of your users.
Activities
1. Double-click User Screen Reference.
2. Assign all users who need to see the excise duty information to the screen reference IN.
Example
Name Screen Reference
MISHRA IN
Screen Sequence Number
Alphanumeric key identifying the screen sequence. The screen sequence defines the sequence of information units in the material master dialog. A screen sequence is made up of data screens. For information on the screen sequences defined in the standard R/3 system, see the IMG documentation Configuring the Material Master.
Note
When creating a screen sequence, use an alphanumeric key beginning with the letter Y or Z (customer name range). This key cannot subsequently be changed.
Dependencies
You can assign screen sequences to users in the IMG activity Assign Screen Sequences to Users/Material Types/Transactions/Industry Sectors.
Screen reference depending on the user
Grouping of users that determines what screens are displayed in accordance with the user master record when you maintain material master records. It also determines the order in which the screens appear.
Definition: user master record
User and Authorization Management (BC-SEC-USR)
Record that contains important master data for a user in the SAP System.
The user master record contains the assignment of one or more roles to the user. This is how a user menu and the corresponding authorizations for the activities contained in the user menu are assigned to the user. Only users who have a user master record can log on to the system.
Return ->
Definition: user_master_record
Define Form Types
Use
In this IMG activity, you define which form types you want to record in the system. You can only use form tracking for the form types that you enter here.
Example
· Form type: CT3
· Form description: Concessional tax form
· Status: Receive
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
You have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
· VS1 (basic excise duty)
· VS2 (additional excise duty)
· VS3 (special excise duty)
· VS5 (sales tax setoff)
· MWS (central sales tax)
· MW3 (local sales tax)
· ESA (service tax)
· ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use subtransaction types, enter the accounts for each subtransaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hold account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
· Excise group
· Company code
· Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
· Defined the G/L accounts
· Defined the excise groups
· Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Define Processing Modes Per Transaction
Use
In this IMG activity, you specify which processing modes the user can use in the various Incoming Excise Invoice transactions.
This way, you can tailor the transaction to what your users have to do.
Standard settings
The system comes with three standard transactions relating to the Incoming Excise Invoices function (those that are included in the role SAP_CIN). The processing modes available in these transactions are as follows:
· J1IEX_C
This transaction is for excise clerks: users of this transaction can only capture and display excise invoices.
· J1IEX_P
This transaction is for excise supervisors: they can change, display, cancel, and post excise invoices.
· J1IEX
In this transaction, users can capture and post excise invoices, as well as displaying, changing, and canceling them.
Activities
If the standard settings meet your requirements, do not do anything.
Otherwise, you can adjust the standard settings or you can create your own transactions. To do so:
1. In Maintain Transaction, create a new transaction by making a copy of one of the standard transactions. Give the new transaction a transaction code of your choice.
2. In this activity, enter data as follows:
o Tcode: The transaction code that you have just created.
o Proc. mode: Specify what the users of the transaction will do with the excise invoices.
o Active: Select this indicator to activate the setting.
Example
You might want to create a transaction that only allows users to display excise invoices.
Define Reference Documents Per Transaction
Use
In this IMG activity, you specify for each combination of transaction and processing mode which reference documents you want the users to be able to use.
Activities
If the standard settings meet your requirements, you do not have to do anything.
Otherwise, add the entries that you need to the table: For each transaction, make one entry per combination of processing mode and reference document. Activate each entry for it to work.
Definition: excise invoice reference document
Logistics - General (LO)
A document, in India, that you refer to when you enter an incoming excise invoice.
If you have already posted the goods receipt, you can use the goods receipt document as the reference document. Otherwise, you can use the purchase order (or another purchasing document, such as a be a contract or a scheduling agreement).
Example
In the SAP System, you create a purchase order for 100 bags of sand and send the order to your vendor. Two weeks later, the vendor delivers the sand, accompanied by an excise invoice.
When you enter the excise invoice in the system, you specify the number of the original purchase order: this is the reference document.
Return ->
Definition: excise invoice reference document
Maintain Rejection Codes
Use
In this IMG activity, you define the rejection codes that are used in the Incoming Excise Invoices transaction.
Activities
For each rejection code, enter a code and a description. You can also specify whether the excise duty in the invoice is to be posted to the CENVAT on hold account, instead of the CENVAT clearing account.
Specify Which Movement Types Involve Excise InvoicesUse
In this IMG activity, you specify which movement types relating to goods receipts involve excise invoices.
The system uses this information during the goods receipt procedure. When you post a goods receipt using one of the moevement types that you have specified here, the system prompts you to enter the excise invoice number.
Note
This option cannot be used for processing goods receipts without purchase orders.
Maintain Default Excise Groups and Series Groups
Use
In this IMG activity, you specify which excise group and series group you want to appear in these fields by default. You can make separate settings for different combinations of sales organization, distribution channel, division, and shipping point.
Activities
This activity is optional, unless you want the system to automatically create outgoing excise invoices when you create a customer invoice.
In this case, you must also make the appropriate setting in Customizing for Excise Duty, by choosing Basic Subcontracting Attributes
Use
The subcontracting attributes help determine conditions for a combination of an excise group, a transaction type, and a subtransaction type.
The conditions such as the number of excise items per subcontracting challan, if the nonexciseable materials have to be filtered or not when the subcontracting challan is created, the movement type groups for issues and receipts and the hierarchy of determining the excise base value are mentioned here.
Requirements
Before you continue with this activity, work through the following activities:
· Materials Management -> Inventory Management and Physical Inventory -> Goods Issue / Transfer Postings -> Define Screen Layout.
For the movement type 541, maintain the field Purchase Order as an optional entry or as a required entry.
· Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Maintain OutputTypes.
Maintain the output type. On the Default Values tab, maintain the dispatch time and the transmission medium. Maintain the print parameter on the Print tab. This output type has to be maintained in this activity here.
· Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Assign Forms andPrograms.
Maintain the Program, FORM routine, and the form for the output type.
· Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Printer Determination -> Printer Determination by Plant / Storage Location.
Enter the output device that you use.
Settings -> Maintain Excise Groups, and selecting Create EI (Create Excise Invoice Automatically).
Maintain Movement Type Groups
Use
In this IMG activity, you group movement types together to form movement type groups.
Definition: movement type
Inventory Management (MM-IM)
A classification key indicating the type of material movement (for example, goods receipt, goods issue, physical stock transfer).
The movement type enables the system to find predefined posting rules determining how the accounts of the financial accounting system (stock and consumption accounts) are to be posted and how the stock fields in the material master record are to be updated.
Return ->
Definition: movement type
Utilization Determination
Use
In this IMG activity, you specify which CENVAT accounts are to be debited by the Fortnight Utilization of CENVAT report: When the report calculates how much excise duty you must remit, it automatically proposes which CENVAT accounts the duty should be debited to. Here, you specify those defaults.
You can either:
· Debit all the excise duty to one account
· Debit the excise duty to more than one account, in which case you specify which percentage is to be debited to each account
Example
If you want 50% of basic excise duty (BED) to be debited to the RG 23A account and the remaining 50% to the RG 23C account, you would make the following settings:
Acct name BED perc.
RG 23A BED account 50
RG 23C BED account 50
Alternatively, to debit all of the BED to the RG 23A account, and then RG 23C account, if there is not enough in the RG 23A account, you would make the following settings:
Acct name BED perc. +
RG 23A BED account X
RG 23C BED account X
When you come to run the report, the system takes the RG 23A account because it is the first one you have entered. If this account does not cover the BED, the system takes the RG 23C account instead.
Maintain Minimum Balances for Excise Accounts
Use
In this IMG activity, you can maintain minimum balances in your excise accounts. When the balance in these accounts during utilization falls below this level, the system automatically utilizes funds in the PLA account.
Activities
Maintain the minimum balance amount for the excise accounts. If you have more than one excise group, you can maintain different minimum balances.
Specify SAPscript Forms
Use
In this IMG activity, for each of your company codes, you specify which SAPscript forms the system prints the excise registers with.
Standard settings
Country Version India includes a number of sample SAPscript forms and printing programs, which you can use as follows:
Reg. name Lay. no. Form Tcode/Prog
RG 23A Part I 1 J_2IRG23A_PART1 J_2IRAP1
RG 23C Part I 1 J_2IRG23C_PART1 J_2IRCP1
RG 23A Part II 1 J_2IRG23A_PART2 J_2IRAP2
RG 23C Part II 1 J_2IRG23C_PART2 J_2IRCP2
PLA 1 J_2I_PLA J_2IPLA
RG 23 D 1 J_2I_RG23D J_2IRG23
RG 1 1 J_2I_RG1 J_2IRRG1
RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
RT 12 1 J_2I_RT12_3 J_2IRT12
The layout description can be left blank or an appropriate description maybe filled in. You may not change the register name. You can have your own layouts and maintain the name here. If the output device and number of copies are maintained it is automatically picked up for printing.
Number Ranges
You can maintain the number ranges for all CIN Number range objects using this transaction
Activities
Please maintain the number ranges for the folllowing objects The no nr has to be '01' for all
1. j_1iintnum
At an Excise group
1. j_1irg23a1
2. j_1irg23a2
3. j_1iRG1
4. j_1irg23c1
5. j_1irg23c2
6. j_1ipla2
7. j_1iintpr2
8. j_1irg23d
9. j_1irg1_t ( material level)
10. j_1iconpla ( if Consolidated PLA is used )
At Series group
1. j_1iexcloc
2. j_1iexcexp
3. j_1idepinv
4. j_1i57Fc ( 57F Challans
After configuring cinraise the po aganst the material which is lliable to excise.
in migo enter the po number...select the ok indicator and click check button
now can observe excise tab in the header
enter excise invoice no and date.
now post the goods reciept.
according to configuration settings in excise tab it gives whether excise inoice is saving when you posting migo .if invoice is only saving
go to j1iex_p tc and post the excise invoice.
hope your dubt is clearded.
regards
venkat -
Report - GR for which Excise Capture & Posting are pending
Hi,
The scenario for Goods Receipts for Excisable Materials is as follows:
1. GR done by stores
2, Excise Capture done by Excise Clerks
3. Excise Posting done by Excise Supervisor
Is there any report through which we can monitor the following:
a. GR done and pending for Excise Capture
b. Excise Capture done and pending for Excise Posting
Please guide
Regards,Thanks for the reply.
I am exploring the T Code J1IGR; the report name says "List of GR's without Excise Invoice".
I am able to view the GR Documents which I have posted.
My doubt is : will it show the GR Documents for all Materials or only excisable materials. I
I am exploring J1i7 to know what all can I get from here.
Regards, -
hi
i am capturing and posting the excise invoice without po in that system is not updating part 2 register i.e in j2i6- rg23apart2, while part1 is updating.mvt type-501
thks.hi,
Please take CENVAT with J1IH T-Code.
Hope It's useful
Shyam Kogta -
How to create excise invoice without material document
Hi,
I want to create excise invoice for a subsequent credit note. I am agreed to give additional amount to my supplier for which i have not paid to him, now when i issue a subsequent credit note, how to create a excise invoice and do the excise entries without a material document.
Please suggest a solution
Regards,
AshishGo to T Code J1IH.
Select Additional Excise. Replace the document number by the vendors excise invoice. Enter the excise duties in lower box and click on Determine GL accounts button to simulate and then post. -
SYSTEM CHECK FOR CREATION OF EXCISE INVOICE WITHOUT PGI
Hi SAP guru's i need help in this issue++
See i am creating delivery and i did'nt do PGI ,after this i am creating Proforma invoice (here Proforma is must before creating commercial Invoice),with reference to Proforma system is accepting to create Excise invoice without PGI.so,i want system should'nt allow user to create Excise Invoice until unless if he do PGI.I know there is routine for PGI and proforma,is there any kind of routine for PGI and Excise invoice
Thanks & RegardsDear sapsd79,
it is related to copy control - item level
check the following link,
Restrict proforma invoice
any doubt , please revert
saravanan
Edited by: k saravanan on Sep 30, 2008 11:42 AM -
There are 2 plants within same co. code. Plant A manufactures parts and Plant B is an assembling unit. Plant A does STO on Plant B. Plant B assembles the parts and make finished goods. Both plants are located in different states and have different Excise registrations.
Now the issue is that in case of STO, we're following this flow: ME21N (STO, UB)-> VL10B (NL)-> VF01 (Pro forma inv. JEX)-> J1IIN.
1. First issue: Receiving plant does GRN w.r.t Outbound Delivery (is the reference to Outbound Delivery correct?).
2. Second issue: Receiving plant does Excise Capturing through t.code J1IEX w.r.t. STO (is the reference to STO correct?).
3. Third issue: In J1IEX, err is coming: "Maintain Vendor for the Customer XXXXX (code of receiving plant as customer) attached to Supplying Plant XXXX. Message no. 4F115". How to solve this error?
Pls advice on these 3 issues.
Thanks a lot.
Edited by: R S on Jul 7, 2011 7:56 AMHi R S,
We follow the below steps in STO process; please check if this helps:-
u2022 Create Sale Order at Depot Plant u2013 VA01
u2022 Create Purchase Requisition on Sales Order
u2022 Create Purchase Order (STO) u2013 ME21N
u2022 Create Delivery and PGI u2013 VL10B / VL02N
u2022 Create Pro forma Excise Invoice (billing type JEX) u2013 VF01 (basis of STO delivery)
u2022 Create Factory Sales Excise Invoice u2013 J1IIN (basis of pro forma excise invoice)
u2022 MIGO Posting at Depot
u2022 J1IG Posting to capture excise invoice
u2022 Create Delivery and PGI u2013 VL01N / VL02N
u2022 Create Depot Sales Invoice u2013 J1IJ
u2022 Create Commercial Invoice u2013 VF01
Regards,
Palash -
Excise capture in Debit Memo Process
Dear Friends,
I am having a requirement, where, I want to know if the system will capture any excise duties for the debit memo raised for any price escalation.
Can anybody suggest, if I have to do excise transaction for processing for the debit memo raised.
Shall be greatful,if the process is explained to me till excise capturing.
Rgds,
IndrajitHi,
For Debit Memo, you can follow this process:
1. Create the Debit Memo Sales Order against the Billing Invoice which you had already sent to customer.
2. Then do the Billing against the Debit Memo Sales Order. It will update the values in Customer accounts.
3. For Excise entries, you need to do the J1IS Transaction. In that transaction, select the
Doc. Type = OTHR
Doc. No = Billing No. (You can give any refernce no., but for track record provide the Billing No.)
Year = Excise Year
Series Grp = ur wish
excise grp = ur wish
Customer = Sold-to-Party in Billing Doc.
Then click on Add row button, then fill the material details manually. Finally save the document. If in Posting the G/L Accounts are not coming as the required one then you can create one sub-transaction type for the same.
Regards,
Vishal -
Import PO-MIRO-GR & Excise Capturing
In case of doing GR through Goods movement BAPI, I am not able to capture Excise details. We were using BDC to do GR along with Excise capture. Since that was giving numerous BDC errors, we are trying with Goods movement BAPI. Unfortunately we are unable to capture the excise details. Can anyone help me on this. (Even I tried J1iEX - BDC for the same & my excise duty data is not getting populated when i tried the same (Excise capture with GR)). Please help me.
Hi.
1. Custom vendor XK01 create assign recon. account. while creating PO in condition tab . select the condition type display the condition for duties there have option to enter the vendor code. you can automate through access seq. assign to all duties condition type and maintain condition record.
2. MIRO select planned deivery cost.
Custom Clearing Dr.
Custom Payable Cr
3. Yes, you can verify seperately.
4.Yes, through selection of option in MIRO ---<> planned delivery cose or goods serivices
5. point 1 refer.
6. J1ID in vendor details.
7.
8. Item details you see the amount.
9. Check you setting on tax on ggods movement . have you enter all the condition type & G/L a/c
10. Tax pricing procedure --> condition type --> you maintain the accurals & acount key. the acct key have G/l a.c.
11. Point 1
12. J1IEX display mode.
SAM
Maybe you are looking for
-
downloaded Firefox onto friends' laptop last night. Found it necessary to place two websites in the (afore-mentioned) "Exceptions" category. shut down/re-booted three-four times over the next few hours before shutting down the laptop and going to bed
-
Dr. Smoke,Kappy, Neil & Sampson!
It's gonna take Dr. Smoke, Kappy, Neil & Sampson to solve this problem! I've seen it posted here and on the internet and NO ONE has ever solved it. I (and the other's who have posted) have been burning CDs & DVDs with no problems from the day we boug
-
Windows .swf plays too small
I've got a website up with a Flash program (Version 4 Flash) that plays o.k. on the mac but plays about 1/5 size on Windows: <www.home.earthlink.net/~samward> Can anyone point to the way to correct this?
-
How to report and verify counterfei​t products?
If you have a suspected counterfeit Lenovo product, how do you verify it and report it to Lenovo? There should be a web site or contact number for this, but I haven't found anything.
-
"plugin container for firefox stopped working"
Not sure if my question was sent previously. I'm just your "average joe". Should I uninstall FF then reinstall (how?) or delete plugins? (how?) Thanks you in advance..jeff