Excise Details are not maintanied for Vendor, Message no. 8I565;

Hi Gurus,
We have up-graded system from 4.7 to ECC 6.0, Now encountering following error while capturing Excise at MIGO.
Excise Details are not maintanied for Vendor 0000202040. Message no. 8I565;
Kindly suggest a solution for the above error.
Best regards
Naveen D'Souza

Hello ,
Excise Details are not maintanied for Vendor 0000202040. Message no. 8I565
The above given error is common while MIGO while capture of excise invoice. The above written guys are correct, please check J1ID for that Vendor,
1) if after maintening also , suppose you get the above error while MIGO, then select "Only Part1" option in MIGO , and press Check Button, if error goes,
then again go back and select "Capture excise invoice", then system will not give you the above error while Capture of excise invoice in MIGO.
Please check some SAPOSS notes also.
Regards
Mahesh Naik.

Similar Messages

Excise Details are not maintanied for Vendor 0000000957.

Hi,
As per our regular process we are capturing inovie with J1IEX and doing GR in MB01 now i have captured invoice in J1IEX and while making GR with MIGO i am getting error
Excise Details are not maintanied for Vendor 0000000957. , but when i am making GR with MB01 i am not getting any error.
also what configuration required to capture excise invoice and make Gr in MIGO, as capture excise invoice menu is not coming in MIGO in MIGO Exicse tab i can only see only refer excise invoice , only part1 , no exicse registration.
regards,
zafar

Hi,
Do proper setings in Logistics - General -Tax on Goods Movements -India -Basic Settings -Maintain Excise Groups - select your excise group and check settings in MIGO Settings such as EI Capture, Post EI in MIGO, Duty different at GR.
Also ensure that you have maintained excise details for Vendor and Material in J1ID.
Regards,
Vikas

Excise Details are not maintanied for Vendor: GRN error

Dear All,
We have upgraded our Ecc 6.0 system to latest application SAPKH60016 ( SAP_APPL ). WHile testing the system, for import GR's we are getting error saying Excise Details are not maintanied for Vendor. J1ID is also maintained & previously we have received lot of GR's for the same vendor. No changes have been done to Vendor & CIN master.
Please let me know if any note or object to be updated to correct this error.
Thanks
Raghavendra.

hiii
Can u tel me where exactly the excise range was missing ??
Because if excise range is missing , it won't throw this lind of error .
U have found any other???????
Thnaks
SAP-MM

Cenvat determination and vendor excise details are not checked in MIGO

Hi experts,
I have created one PO with Zero excise duty amounts (No excise duty) and following problem observed at the time of MIGO -
System doesnt check any vendor excise details (excise indicator marked as ZERO in j1ID) even without entering excise invoice No and date in MIGO system accepts the entry with ZERO excise duty amounts.
hence a fictitious part 1 No is generate by system for which no point taking part II.
Kindly suggest
Regards,
Pawan

Check SAP Note No 1282447- check vendor excise details in MIGO .
While capturing excise invoice along with the goods receipt process through
the transaction MIGO, the system does not validate the existence of the
excise details of the vendor master.
This note introduces the error 8I 565, 'Excise Details are not maintanied
for Vendor MIGO', when the vendor excise details are not maintained in
J1ID.
Raviraj.

Assessable value and the Excise details are NOT coming in MIGO

We are facing problem that assessable value and the Excise details are NOT getting populated automatically when doing MIGO in IN03 plant.We have a STO from a DC to plant. We created the outbound delivery and then captured the excise invoice using J1IJ.In migo we give the reference of this excise invoice in the excise invoice tab then the values calculated should flow in MIGO.This is not happening and user have to manually calculate the tax and put in the system.
I have followed the following steps
1. Create STO PO ME21N
2. Create outbound delivery using VL10B
3. Do the PGI using VL02N
4. Capture the exice invoice using J1IJ in depot
5. Do MIGO and give the reference of the excise invoice created

Hi,
In STO, your supplying plant is your Vendor for the receiving plant. Hence, you have to maintain the supplying plant as vendor also. Pl. check in table J1ID that the vendor data is maintained for the supplying plant.
Regards,
Prashant

In PO tax details excise details are not appraring

Hi experts,
We have rolled out a new plant. In PO, excise details, i.e. BED, Cess, Scess not appearing. Tax code (FTXP) and J1ID details are already maintained.
Please help
regards

Hi,
For this you have to maintain chapter id details and excise settings in customization.
Logistics - General->Tax on Goods Movements->India
in this please maintain all the related settings.
thanking you.

Excise details are not updating in MIGO

hai, i am working with CIN,,i raised a Purchase Order and all the taxes maintained are updating in Invoice tab of PO...
whn i am tryimg to enter GR ,
the excise Invoice and excise item tabs are displaying but the excise values(BED,AED )are not updating frm PO..
can anyone help me

Hi,
1) check whether u have mantained the Default condiition types in CIN settings.
Path SPRO->Log Gen->Tax on goods movt->india->maintain Excise defaults.
2)Check the JMX1,JEX1,JHX2 condition maintained as 100% in FV11
regards,
sujit

Excise Details are not capture in Excise invoice(J1IIN)

Hi,
I have created billing document where in account document I can clearly see BED , AED n SED but when I will create excise invoice in J1IIN with the reference of Billing doc. I can not see BED ,AED n SED capture in J1IIN, below errors are showing
Balance in transaction currency
1) Error
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 20.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
2) Error
System failure during locking GLaccount 1000 by 428481
Message no. 8I076
Searches on portal but didn't find out suitable solution...
Plse suggest
Edited by: KHAPREVIPIN on Nov 29, 2011 11:17 PM
Edited by: KHAPREVIPIN on Nov 29, 2011 11:36 PM

Hi,
I got resolved this problem yesterday...
I didn't maintain SD rounding in CIN company code setting ,I have generated excise invoice yesterday but Today i m creating same document for same plant n everything is same but i m facing same error........
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 30.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
System failure during locking GLaccount 1000 by 428481
Message no. 8I076

Excise details are not comming in the GRN

Hi,
I am using SAP B ONE 2007 PL 10 and faciung the problem while making GRN by making an add on, my add on take information like PO no(DocEntry), Item code, Qty from user and makes GRN internally in this case SAP is required to find out tax code from PO and update taxes in GRN accordingly but somehow it is not working sometimes and it does work sometimes which confuses me completely as either it should work or it should not but here it is working with same case and next time it dosn't work for same PO and same Item I am posing patch of the code below if some one can help me out in this,
                    oMat = SBO_Application.Forms.Item(FormUID).Items.Item("mtx_0").Specific
                    GRPO = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes)
                    GrnCode = SBO_Application.Forms.Item(FormUID).Items.Item("Code").Specific.string
                    GRPO.DocNum = GrnCode
                    GRPO.Series = 100
                    GRPO.DocNum = GrnCode
                    GRPO.Comments = "GRN Against Document No. " & Trim(GrnCode)
                    ' set the documents due date - mandatory
                    GRPO.DocDueDate = Date.Now 'vendorCode ' '"11/04/2008"
                    ' Here we are giving base DocEntry Here 6 is purchase order Number
                    oMat = SBO_Application.Forms.Item(FormUID).Items.Item("mtx_0").Specific
                    xcnt1 = oMat.RowCount
                    ' set the business partner code
                    vendorCode = SBO_Application.Forms.Item(FormUID).Items.Item("Vcode").Specific.string
                    GRPO.CardCode = vendorCode
                    VendorRefNo = SBO_Application.Forms.Item(FormUID).Items.Item("VendorRef").Specific.string
                    If VendorRefNo = "" Then
                        VendorRefNo = "Not Available"
                    End If
                    GRPO.NumAtCard = VendorRefNo
                    For intloop = 1 To xcnt1 Step 1
                        GRPO.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oPurchaseOrders
                        ITEMCOD = oMat.Columns.Item("col_0").Cells.Item(intloop).Specific.string
                        DOCENTRY = oMat.Columns.Item("col_6").Cells.Item(intloop).Specific.string
                        linenum = oMat.Columns.Item("col_8").Cells.Item(intloop).Specific.string
                        StrSql = " Select OPOR.DocEntry,LineNum from OPOR inner join POR1 on OPOR.DocEntry = POR1.DocEntry where OPOR.DocNum = '" & Trim(DOCENTRY) & "' and POR1.ItemCode = '" & Trim(ITEMCOD) & "' AND POR1.Linenum = " & Val(linenum)
                        rs.DoQuery(StrSql)
                        If rs.RecordCount > 0 Then
                            docid = rs.Fields.Item(0).Value 'DOCENTRY
                            GRPO.Lines.BaseLine = rs.Fields.Item(1).Value
                        Else
                            docid = ""
                            GRPO.Lines.BaseLine = CStr(linenum)
                        End If
                        GRPO.Lines.BaseEntry = docid
                        GRPO.Lines.TaxLiable = SAPbobsCOM.BoYesNoEnum.tYES
                        ITEMCOD = oMat.Columns.Item("col_0").Cells.Item(intloop).Specific.string
                        GRPO.Lines.ItemCode = ITEMCOD
                        qty = oMat.Columns.Item("col_3").Cells.Item(intloop).Specific.string
                        GRPO.Lines.Quantity = CDbl(qty)
                        whscode = CStr(oMat.Columns.Item("col_7").Cells.Item(intloop).Specific.String)
                        GRPO.Lines.WarehouseCode = whscode
                        If Not intloop = xcnt1 Then
                            GRPO.Lines.Add()
                        End If
                        'GRPO.Lines.Add()
                    Next
                    return_value1 = GRPO.Add
Thanks,
Edited by: Ahiresh Gaikwad on Feb 1, 2010 3:03 PM

Hi,
Based on the RefDB, base DocEntry may not be equal to base DocNum. You need baseRef instead.
Thanks,
Gordon

Rollover Tool Tips are NOT intuitive for error messages

Just a note for the Adobe guys here:
I've run into 2-3 occasions so far this morning that I was stymied by seemingly unresponsive DPS apps/services, only to discover the error message was hidden in a tooltip for the field.
This happened both on the Folio Producer: Organizer (the very underdocumented Export command), and a couple times in viewer builder when I would bang "next" to no avail, only to finally notice a thin red line around a field.
Not sure what the logic is for this, but that is not the proper usage of tooltips and is a pretty unfriendly experience for the user. Please, flash a big error popup in my face when there's an issue. I'd appreciate it.

In the process of making a single folio viewer, you need to use the "export" function in Organizer. I went to do so, but the button was grayed out, and the "Export" command is not documented in either the "iPad publishing companion" or the "Uning Adobe DPS" document. Export is mentioned in the online help, but it never mentions that you have to publish the folio before you can export. It was only during a call to tech support that I happened to hover over the button long enough to see the "You must publish the app" warning in the tooltip.
I now get it that "publishing" the folio is apparently a needed part of your process, but for a single issue viewer app, it never occurred to me that I needed to "publish" it, since Adobe would not be delivering the content.

Excise deatails are not appearing in J1IEX in case of STO

Hell Guru
Excise details are not appearing in transaction code J1IEX while capture and posting the PART-1 & 2 Entries in case of STO throuhg SD route.
All the details are maintianed in J1ID its not appearing in JI1IEX
Thanks & Regards
Laxmi N

HI,
LG_TAX ON GM-INDIA-ACCT DETERMINATION-SPECIFY EXCISE ACCT /EXC TRANSCTION
Here have u mainatained for DLFC
Have created J1id for the receiving plant.
Is it within co.cd or different co.cd.
Have given the cenvat determination in J1ID.
Edited by: Murugan mgl on Aug 13, 2009 11:36 AM

Message no. 8I766 Number Ranges are not maintained For Extended Withholding

Dear All,
I am facing the following problem when i am trying to generate the withholding tax certificate
1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax
     Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno in EWT.
I have checked all the above tables and found that the entries are maintained
2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
> here the following problems are faced
      A) . TDS Number is not coming
      B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
      C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
Please help me in soving the above issues
Thanks & Regards
Arun.R

Hi
You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
Thanks
GG

ARE 1 update error excise modvat account not defined for ARE 1

Hello Expert,
Iu2019m trying to update ARE 1 Document in export scenario, but it shows error -
Excise modvat accounts not defined for ARE1 transaction and K5 excise group
Message no. 8I402
Iu2019ve gone thru Specify G/L Accounts per Excise Transaction in CIN. But exactly in which field we need to maintain the GL.
thanks
GKumar

HI,
You are not giving correct Excise inovice no. in J1IH transaction for cancelling. Because if correct excise invoice number is not given then also system give the same error. So please check the excise invoice number carefully
Please check SPRO => Logistic General => Taxes on Goods movement => India => Outgoing Documents => Specify Default Excise Group and Series Group, whether you have assigned the related G/L Account for the given combination with Excise Invoice Type
You will Check following G/L are maintained or not in "Specify G/L account per excise Transaction"
maintain GL account for ETT ARE1 in table J_1IEXCACC for field Mod.Clearing field name is J_1ICLEAR
Cenvat Suspanse G/L
RG23A BED
RG23A ECS
RG23A AT1
Also Check following under "Specify Excise account per excise Transaction"
CEIV CR Credit MSUSP CENVAT suspense account
CEIV DR Debit PLAAED PLA AED account
CEIV DR Debit PLAAT1 PLA AT1 Account
CEIV DR Debit PLABED PLA BED account
CEIV DR Debit PLAECS PLA ECS Account
CEIV DR Debit PLASED PLA SED account
CEIV DR Debit RG23AED RG 23 AED account
CEIV DR Debit RG23AT1 RG 23 AT1 Account
CEIV DR Debit RG23BED RG 23 BED account
CEIV DR Debit RG23ECS RG 23 ECS Account
CEIV DR Debit RG23SED RG 23 SED account
Thanks,
Raviteja
Edited by: Ravi Teja.T on Feb 2, 2012 9:55 AM

Excise invoice is not meant for exports. Message no. 4F242

Hi All
As per my Client Requirement i need to do export sales from specific Plant(Depot). which is used for only export sales.
i created STO and then i did Delivery and Billing (JEX) and created Excise invoice with refrence to Billing Doc
while Creating ARE - 1 document through T.Code J1IA101 it thronging ERROR
0020000023/2008 excise invoice is not meant for exports
Please give me u r suggestions
Thanks in Advance
Madhu

Dear Madhu,
As per your thread system is telling that invoice is not relevant for the exports so,
Please check the Excise invoice which you created is it relevant for expotrs or relevant for STO billing i.e domestic.
I hope it will help you,
Regards,
Murali.

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer. Any ideas?

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?

Hello there DesertRat71,
I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
All the best,
Sterling

Excise Details are not maintanied for Vendor, Message no. 8I565;

Similar Messages

Maybe you are looking for