Excise details not maintained for import vendor

Dear All,
We have upgraded from 4.7 to 6.0 while doing import scenario we have error to maintain excise details for import vendor.
Whereas we are not maintaining any excise details fro import vendor.
Please guide me for above problem.
Also I think note 1282447 not applicable for the same
Regards,
Gitesh

Hi Jeyakanthan A ,
Thanks for your fast reply.
My vendor is import vendor previously in 4.7 we were not maintaining excise details of vendor.
But now we have upgraded to 6.0 why system is asking for the excise details.
Please suggest.
Regards,
Gitesh

Similar Messages

  • Error msg in GR for excise details not maintained

    Dear All,
    I need to know whether it is possible to have an error message generated in MIGO if the material does not have j1id maintained for it. if yes, please suggest possible solutions.
    regards

    No not possible in Std SAP
    When J1ID details are not maintained excise tab does not comes,
    if excise tab does not comes then its clear excise details not maintained in J1ID
    and there is no std message for this and logical it is not required also , If u set a error message in some user exit than system will expect details in J1ID for all the material, and even for those materials who dont have excise.
    If than also u have to have error message if J1ID details not maintained u will have to use user exit
    where u can write and logic not only on material but also tax code in Po or condition record for excise
    ie if that PO has excise tax code or condition record for excise than check if details are there in J1id if not error
    hope its clear

  • Excise details for IMPORT vendor

    Hi SAP ients
    While Doing J1IEX_P for import vendor system gives error msg "maintain Excise details for the vendor"
    But for IMPORT vendor we dont maitain such details
    Am I right?
    Can anybody help?
    santosh j

    Thanks Pankaj
    It is working
    I have another question Regarding Subcontracting
    When we send the material to supplier it is done thr' 4(5) (a) excise challan whose limit is 180 days (material should come back to parent company within 180 days)
    But now Excise has issued new amendment / form ie 4(5)(b) for sending the CAPITAL GOODS ie dies/ moulds etc for the production purpose at supplier's end against form 4(5)(b)  instead of  4(5) (a) whose validity is @ 2 years or more
    Is there any standard format in SAP for that? OR
    Any new note released by SAP?
    Thanks in advance
    Santosh Jagtap

  • Excise base value is not picking for Imports

    Dear All,
         Excise base value is not picking for Imports when doing MIGO and BED/E CESS/S&H E CESS also not picking.
              Please suggest me
    Thanks,
    Tiru

    Hi,
    In case of Imports, you have to define following condiiton types in MM Pricing Procedure;
    JCDB     IN:Basic Custom Duty
    JCV1     IN : CVD
    JECV     IN : Ed Cess on CVD
    J1CV     IN : H&SECess on CVD
    JEDB     IN : Ed Cess on BCD
    JSDB     IN : H&SECess on BCD
    JADC     Addnl Duty of Custom
    These should be created as a delivery cost condition in M/06. And assign the accruals to these in M/08.
    Folowing Gl Accounts will be assigned to those accruals in OBYC;
    CVD Clearing (For accrual of conditions JCV1, JECV, J1CV, JADC) and Customs Clearing (For accrual of conditions JCDB, JEDB, JSDB)
    Now follow the below procedure for Import Purchase;
    1. ME21N u2013 Create Import Purchase Order (Here assign the Vendor of Customs Office to the above mentioned 7 condition types in "Details" of "Conditions")
    2. MIRO u2013 Enter Customs Invoice w.r.t. Import PO (Here select "Planned Delivery Cost" and do LIV for Customs office Vendor, enter values for duties as per Bill of Entry manullay during LIV)
    3. J1IEX u2013 Capture Bill of Entry
    4. MIGO u2013 Goods Receipt against Import PO
    5. J1IEX u2013 Post Bill of Entry
    6. MIRO u2013 Enter Vendor Invoice
    7. MIRO u2013 Enter Clearing Agentu2019s Invoice

  • Excise Accounting document not generated for Imported Asset GR

    Dear all,
    Excise accounting document is not generated for imported asset goods receipt(MIGO)
    but "C" Register part 2 no. is generated,usual accounting document is generated for GR,
    Asset is Dr to GR/IR
    Process is
    1. Create asset purchase order with acct. assignment "A",
    2. Customs miro based on p.o.
    3. Do GR with excise
    4. Post invoice for orginal vendor.
    What will be cause of this problem ?
    How to solve this issue ?

    The above issue may be due to Accout assignmnet -A . Check your accout assignment  in spro -mm-purchasing -accout assignment - Asset A - GR Non valuated has Ticked on . If it is ticked on - No Fi entry will happen at the Time of GR .
    The reason being , if an FI entry happen for the first time , asset is capitalised . To avoid this GR is made in ur config as this .
    rewdzzzz is full if correct
    Edited by: manu m on Apr 24, 2010 11:11 AM

  • Assessable value not maintained for the material X

    Dear all,
    i have maintained material chapter ID,Plant and materialchapter id  combination ,assessable value , cenvat determination, and vendor excise details in the transaction J1ID .
    Even after maintaining all these conditions , i am not able to save the po,while saving the po i got a error message that assessable value not maintained for the material X..
    Points will be rewarded for useful suggestions.
    Thanks in Advance.
    velu+91-9789991357

    Hi,
    Search using approriate keywords in SDN, u get most of the details, i have now done the same searched and have pasted below .
    Try ME2N.
    Click on the "dynamic selections" icon and add the release indicator as an additional selection. Enter the release indicators that you class as "awaiting approval" and you will then have your list.
    The ME2* series of transactions are not that much use prior to 4.7, the layout is poor. But if you have 4.7 or later you can get the screen to use the ALV format and this transforms the ME2* (i.e. ME2L, ME2M, ME2N etc.) transactions into VERY useful reports.

  • Solutiom for EXCISE INVOICE NOT CREATEED FOR THIS DOCUMENT

    hi,
      wlhile i want print preview in transaction VF03/VF02 for a particular biiling document number ,  i get the  error message  "EXCISE INVOICE NOT CREATEED FOR THIS DOCUMENT" .what is the solution?

    HI Tej
    All the Import cycle has created three documents.
    1. MIRO doc for custom duties and CVD .--   MIRO posted in USD .  I can see the doc in both currency -  INr and USD via accounting doc - display currency.  I do not have any issue.
    2. MIGO doc - for custom duty and Freight -   MIGO posted in INR , I can see accounting doc in USD and INR both via accounting document-  Display currency and even in the MIGO -- purchase order history tab.
    3. Excise Invoice - for CVD -  EX Invoice posted in diifferent way --
    In this document please note amounts for CVD is as per USD rate , but currency showing is INR , which is a mismatch.
    in Excise customization for company code setting - exchange rate type M is maintained. OB08 is also maintained for USD/INR
    Condition type JCV1 is also marked with currency conversion and accruals.
    Is there any patch or note I need to apply to getting this converted , or any process issue.
    Regds
    Mukta

  • Fiscal year variant Z1 is not maintained for calendar year 2012 when loadin

    Dear Experts,
    We are working on BI7.0 extracting data from ECC 6.0.
    I am trying to load data from 0HR_PY_PP_1 which is a Self DataSource in our BW System (extracts data from 0EMPLOYEE and 0PERSON) to load into ZPA_C50 which is a copy of BCT InfoCube 0PAPA_C02 (Headcount).
    The data has come through into the PSA very well.
    However, DTP is throwing an error while loading 32242 records of data from PSA into ZPA_C50 InfoCube. The error details as below:
    Error while updating to target ZPA_C50 (type INFOCUBE)
    Fiscal year variant Z1 is not maintained for calendar year 2012     FGV     2
    Messages for 1 data records saved; request is red acc. to configuration
    Processing Terminated
    We are actually doing a Re-implementation of BW 3.0b in BI 7.0 Ehp1. We have imported Maintenance of Fiscal Year Variant from the BW 3.0b Production System. So this shouldn't be a problem I guess since I have also checked the setting in SPRO in BI 7.0 Development (New) System and they are looking good.
    Also, when I do a Filter on 0CALDAY in DTP from 01.01.1900 to 31.12.2010, the loads are working fine. I want the load to run without any Filters on 0CALDAY.
    Has anyone been in similar situation. How did you resolve this issue? Your time is very much appreciated.
    Thanks in advance.
    Chandu

    Dear Experts
    Thanks for your time.
    We have resolved this issue ourselves. We have maintained 'Shortened Fiscal Years' for 'Z1' and it is working fine now. Steps are as below:
    In BI Dev System -> SPRO -> SAP Reference IMG -> SAP Customizing Implementation Guide -> SAP NetWeaver -> Business Intelligence -> General BI Settings -> Maintain fiscal year variant -> Select 'Z1' Fiscal Year Variant and then DoubleClick on 'Shortened Fiscal Years' to set the Fisc Year Variant -> Save.
    The dataload should work fine now.
    Cheers,
    Chandu

  • Message no. 8I766 Number Ranges are not maintained For Extended Withholding

    Dear All,
    I am facing the following problem when i am trying to generate the withholding tax certificate
    1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax 
         Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert  (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno  in EWT.
    I have checked all the above tables and found that the entries are maintained
    2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
    > here the following problems are faced
          A) . TDS Number is not coming
          B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
          C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
    Please help me in soving the above issues
    Thanks & Regards
    Arun.R

    Hi
    You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
    Thanks
    GG

  • Accounting entry against Excise invoice not created  for Service Tax sales

    Dear all,
        I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
    Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco)  - Domestic(Customer receivable reconciallation) account-Credit entry.
      But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
    Plz. suggest step by step guideline to resolve this issue.
    Thanks & Regards,
    Mukesh Pardeshi

    Hi ReazuddinMD,
    thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
    Now i am geeting error as below at the time of saving Excise invoice,
    No account is specified in item 0000000001
    Message no. F5670
    Diagnosis
    No account was specified for account type "S" in item "0000000001" of the FI/CO document.
    System Response
    The Financial Accounting program cannot process the document.
    Procedure
    A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

  • Fiscal year variant is not maintained for calendar year 2009

    Hi,
    After upgrade to BI 7.0 we are getting error: "Fiscal year variant & is not maintained for calendar year 2009" while opening a query through Bex Analyzer.
    Basically it is happening like when we open a particular query, the Variable selection screen comes up, then on clicking the exection button (after selection) it shows SYSTEM_FAILURE exception & clicking the details button, shows the message ""Fiscal year variant is not maintained for calendar year 2009"
    Please provide some information/resolution to this.
    Thanks,
    Shantanu.

    HI,
    Please ensure that you have defined your fiscal year variant in OB29
    correctly.  It is necessary that:
      1.  the previous year has been maintained,
      2.  an entry for Dec 31 exists in each fiscal year,
      3.  the following fiscal year has been maintained.
    Hope this helps.
    Regards,
    Nitin

  • Object type not maintained for message type

    Hi,
    I am working on chnage pointers for Vendor classification data. when I execute the program RBDMIDOC (BD21) I get the error Object type LIFNR not maintained for Message type.
    If anyone has worked on change pointers, please guide me in solving this error.
    Thanks
    Hari

    Hi
    Which msg type u r using there.
    Regads,
    Prasad.

  • Modvat accounts not maintained for CEIV

    Dear Experts,
    We are getting error Modvat accounts not maintained for CEIV for excise group while cancelling excise invoice thru J1IH, cancel excise invoice.  The same error is not appearing in production system. its happening in development & acceptance system only. we have upgraded dev & acc system to support pack 16. please comment on this

    done

  • Number group not maintained for WITH HOLDING TAX challan

    Dera frends can you help in solving the problem.
    I have configured WHT it is posting well in vendor a/c and posting in tax account too. but while executing remittence challan System giving message " number group not maintained for CO code xyz section IEQEWT! and business places 194c.
    where company code - XYZ
    official withholding tax code - 194c
    business place EWT1.

    Hi
    Pls follow the path
    IMG>Financial Accounting (New)>Withholding Tax>Extended Withholding Tax>Postings>Certificate Numbering for Withholding Tax
    Pls assign points if the information is useful to you
    Regards
    Sanil Bhandari

  • Error Valuation & is not maintained for material & in IDOC

    Hi Experts!
    I'm currently having a difficult problem here.
    This is an idoc issue. The scenario is: An idoc is created from WEB and an error appears "Valuation & is not maintained for material &" in SAP. But when we reporcess again usign the same data through WE19 everything seems to be okay. The status is green. Do you have any idea regarding this?
    The error must not appear because the material that is being process is a non-stock material which does not need valuation.
    I hope somebody can help me on this.
    Thanks in advance!

    Hi,
    Please see that error ME124 ir raised because view "plant stock /
    storage location stock" is not maintained in material master for plant.
    if the material is not available in stock then no delivery and no
    transfer is possible. It is not possible for non-stock
    materials to make an stock transfer.
    If you are using ME21* to create stock transfer order,
    Please make sure the view "plant stock / storage location stock"
    have maintained for the relevant plant in the material master
    record.
    Please also make sure the quantity flag have switched on in Ta OMS2
    for both the delivery and receiving plant for the material type
    that you are using. Otherwise, the error message ME 124 will be
    issued.
    But if you get the error  error ME124 only for a vendor  is the
    assignment in Vendor Master (MK03) to plant. This assignment is
    used in case of STO, in which plant must be assigned to vendor.
    In order to not get the error, please remove plant  in the
    following path:
    XK03 > Extras > Add. purchasing Data > Plant assignment.
    BR
    Nadia Orlandi

Maybe you are looking for

  • IOS 7.0.4 on iPhone 4S has caused sound to go on and off? Has anyone else experienced this? Is it fixable?

    Also the animation of the bell with a sound bar underneath is not working properly. Sometimes it pops up with the bar under the bell and sometimes the bar is missing and just the square with the bell is all you see. The side sound buttons are still f

  • Final Cut to DV Problems, Big Problems

    I have used Final Cut for years now and I edit video captured from DV tape and then print back to DV tape. I have had no problems at all until recently. Here is what is happening. When I print it back to tape and when I view the results, frames are s

  • Photos being imported are not importing

    I have imported my photos to iphoto and I have the lates version. Since December each attempt I have made to import the photos it no longer keeps them there. What am I doing wrong? How can I recover these photos?

  • I do not have any wedget in my notification center

    I've update to Yosemite couple a days ago on my mac 13 mid 2012, every thing was fine and nice working until i noticed it drains the battery faster than mavarix, so i downgrade to mavarix, but it was the same so i update again to Yosemite, but the pr

  • FLASH CS4

    I have not tried Flash CS3 but let’s just say “I Know”. I have been using Adobe products since the beginning! I’ve used Adobe products for illustration, photo work, and print media. I have been using formerly “Macromedia” products for the web since t