Excise duty @10% not displaying in printpreview----SAP INVOICE

Dear experts,
Here in Sap invoice Excise duty @10% is not displaying in the printpreview. I tried debugging in Report program, but couldn't able to find the solution. so please give me the solution with step by step, Because am new to this one.
Thanks & regards,
selvakumar.

Hi ravi,
   Yes ofcourse am using smartform, Here in billing document(invoice) printpreview. there are some excise columns like edu cess,vat and all. The same ''excise duty @10%'' and the value of the excise duty also not displaying in the billing document printpreview.....I have debugged smartform nothing wrong with smartform. So there amy be some problem with the abap editor.
I have the conditions like Wa_final-exp ne intial
                                         Wa_final-fkart ne 'yrmf'
                                          Wa_final-fkart ne 'yctf''.
please let me know what is the problem in it.
Thanks & regards,
selva....................

Similar Messages

Excise duty is not displaying in MIGO

Dear All.,
I have captured excise invoice against Purchase Order in J1IEX .Then i have done GR for that PO.
While doing GR, I have referred the excise invoice which was previously captured against PO.
After posting the GR,when i display it in MIGO,excise tab is missing in the material document.
Why it is so?...
In case of rejection of the components against the particular GR,we don't know whether excise is captured for this or not & its value...
Please reply fast.
Regards,
Oshiin

all the settings u have mentioned are maintained...
Please understand the problem.
This issue arises when i do capture of excise invoice first & then refer it in GR.
When i do capture excise invoice in GR itself & later post in J1IEX_P..Its OK.
Any solution?

I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS

while doing STO. Our STO procedure is intiallyyPO with UB STO then MB1B with 351 movement type transfering stock from one plant to another plant. Next step is Tcode: J1IS here BED should pick automatically once i click on GET EXCISE INVOICE tab. then we go for JIVS and MIGO with 101 movement type.
I am facing a problem that Basic Excise Duty is not picking in Tcode.: J1IS .
we are not going through SD configuration and I mentioned evrything in Tcode J1ID

Chek SAP Note 951938 is applicable to you
Regards
Sanil Bhandari

Excise duty is not calulating

Dear All,
if i am creating sales order excise duty is not calculating.there is message which is i'm getting.No add. Vendor / Customer data maint. for -Please maintain J_1IMOVEND.
Regards
Ajit Jaiswal

in customer & vendor where we maintain Excise tax indicator.
Go to J1ID, select "Customer Excise details" and execute. There check whether the customer code is maintained there. If so, drag your mouse to right side and check "1" is maintained under the tab "Declared".
thanks
G. Lakshmipathi

Re: Excise tab is not displaying in migo.

My end user has created an asset P.O. Then while executing migo excise tab is not displaying. what is the fault, & where we have to correct it. its ur.
thanks
tuljasingh.

Hi,
While doing MIGO transaction the excise tab will appear only if you mark your line item as OK in your MIGO item details.
Try to simulate MIGO by marking your item as OK then excise tab will appear & if the excise values are not flowing in the excise tab check the following
J1ID excise master
1. Plant - Material - Chapter ID combination
2. Vendor Plant Excise Details.
3. Excise Tax Rates for Chapter ID/Plant combination.
Check whether the rates are there in your PO or not?
Also check the whether you have maitained the Default excise condition types in SPRO/LG/Tax on Goods movements/India/ Basic Settings -Maintain Excise Defaults.
Regards,

Rate and accessable value is not displaying for the tax invoice output

Hello All,
Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
Thanks & Regards,
ramesh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

Excise duty values not flowing from PO to MIGO

All SAP Gurus,
We have created a PO and used excisable tax code in it.
Excise duties are calculated correctly in PO.
When we go for Goods receipt against the PO, excise tab appears, but there are no values in excise fields (fiels are blank).
System allows us to enter the Excise duty values manually.
Further excise entries and register updates are happening correcetly.
We do not undersatnd why the Excise duty values are not flowing automatically from PO to GR (MIGO).
Please help.
Regards,

hi
chekc following
path: spro>logistic general >tax on goods movements>india >basic settings>determination of excise duty >maintain excise defaults >
here give appripriate conditions for ur procedure as per BED cess and other
regards
kunal

Excise Duty Value not flow from J1IJ to VF01

Hi SAP Expert,
I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ for pricing procedure JINDEP. I maintained Alt Cal type as 356 in Pricing procedure JINDEP for Excise condition types JEXP. But it is still not flowing. I am using Tax Procedure TAXINN.
Do I need to go to VTFL In item level copying requirement to set pricing type: to C ??
But once i set, it will impact other billing document too. Please advise.
Thanks.

Hi,
I have successfully posted Excise Invoice at Depot using J1iJ.
When i create billing via Vf01, i am unable to see the value of Excise Duty in item pricing condition from J1iJ.
I analyse the pricing condition for condition type JEXP, below is what i got :
This message tells you that the condition record exists, but has not been set in the document. If pricing was carried out again for the document item, then the condition would be set.
There are different reasons for this:
1.The condition was deleted manually in the item condition screen.
2. The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again.
If the condition type is used for subsequent settlement (rebate), there may be subsequent updating of business volume (the agreement is is created retrospectively). The document conditions do not contain the condition record, as the condition record was not created when pricing was carried out. Updating of business volume is carried out using special functions for subsequent settlement.
1. When an item was added, the condition record was accessed with key fields other than change time. This could lead to different results in the requirements check at the time of adding and the change time. This can occur when modifications are made.
2. In billing (or when copying orders): Certain condition types were not determined in the source document (this is usually controlled by the pricing requirements). When creating the document, the document flow (TVCPF,TVCPA) is processed using a pricing type that does not redetermine these condition types, although they are supposed to be called via the requirements.
Is it correct that i assigned routine 356 to Pricing Condition JINDEP ?

Excise Duty is not captured in MIRO

Dear,
When we posting a vendor invoice against purchase order , It is not capturing excise duty ,
In part 1 excise invoice date is 31.03.2014 with the GR posting date 15.04.2014 and In part 2 posting was done on 16.04.2014.
we are facing this problem due to different excise year upated in table J_1IEXCDTL and J_1IGRXREF.
Please give us solution.
Br,
Swapnil

hi,
have you checked J1ID all entry for that material is exist and also check PO invoice tab whether tax code exist for that material.
Regards,
mukesh

Excise tab is not displaying in migo

Hi,
for one material, purchase order has done. when i am going to do migo against purchase order, the excise invoice & excise items tab is not displaying.
note:- for all other materials(purchase order), excise tab is displaying.
could you please solve this problem.
thanks/regards
vish

Hi,
Check the problem with repect to the material,
Check if the Tax % is assigned properly for the combination of tht material. check J1ID,
Is in the PO the excise amount calculated? Check the condition records?
Thanks & Regards
Kiran

Excise Duty is not gettig posted in accounting doc

Dear Experts,
In one of my excisable plant, in pricing procedure, excise dutyeducation cesshigher edu cess is calcualted on the basis of base value, which is coming fine. But our requirement is that base valueexcise dutyeducation cess+higher edu cess, combine value should come in Net Value field while making order & invoice. Because of the same reason, excise duty value is not posted in FI, accouting doc of the same is not generating as only base value accounting documents got generated. I have tried by changing the subtotal value but it doesn't work. Kindly help.

Dear Prashant,
Thanks for reply, but i checked my excise cond types, in all conditions, cond cat is blank & cond class 'A' is maintained i.e. Discount & Surcharge.
My problem is that, my excise value is not got posted in net receivable value in accounts. This problem arise, when we make sales order, Net Value field doesn't pick excise there & while invoicing, it post only the base value & rounding off adjustments at header level. I don't know, from where this Net Value field in sales order is picking the value but my problem will solve if my grand total value(base valueexciseedu cess+higher edu cess) will pass to Net Value field while making sales order. Kindly help.

Reg Excise Duty is not coming in the Excise invoice

Hi all,
We are doing STO senerio between two plants while doing commercial invoice the EXcise Duty ZMOD and ZCES is determining in the commercial invoice but when we do the Excise invoice in J1IIN the ZMOD and ZCES values are not comming.
So can you please assist to over come this issue
Please give replay ASAP,
Regards,
Murali.

Hi Alpesh,
Thank you for your replay I already checked that the A/R BED,SED CESS condition types are maintaining to that Tax procedure.
Can you please assist
Regards,
Murali.

SED (Special Excise Duty) column not available in J1IJ (Depot Excise INV).

Hi
I am creating Depot sale scenario. while creting Depot Excis invoice through J1IJ t-code there are column like BED,AED,ECss,SHEcss but there is no column for SED (Special Excise Duty). In my scenario I need to capture the SED .
I am able to capture the SED in RG23D register for Receipt part but for Issue part I am not getting this SED.
Please help.
Regards
Sivakumar

Hi,
Check again, There is a column for SED next to BED in J1IJ screen also.
Regards,
Brinda

Excise Duty Group not being populated during VL09 in MSEG-ROITAXGRPtable

Hi,
When we do the PGI (601 movement type), the data gets updated in MKPF & MSEG tables.During this process the details pertaining to ED group(field ROITAXGRP) are not updated in MSEG.
The above factor has the following connection to 602.
Subseqently when we do VL09 - the data pertaining to PGI (601) is imported from MSEG & hence ED group does not get populated as the system takes the material document of 601 to reverse the delivery document
We need to know the following things.
1. When we are doing delivery (Movt type 601) ,excise duty group gets updated in which field and table?
2. When we are reversing the document why in the MSEG table ROITAXGRP field (Excsie Duty Group) not getting updated.
3. Is there any User Exit which can be usd to populate this . We are using version 4.6c (IS-OIL) version ?
regards,

Thanks,
K.Kiran

Excise tab page not displayed during goods receipt for material.

Dear All,
The issue is we are doing GR for a PO in MIGO.Now the excise tab page is displayed in case of all other matl except for one.The matl type is manufacturing matl for this particular matl.I have checked all the settings in J1ID, also checked the tax code they are ok.can anyone guide me with any other possible solutions to this.
Thanks in advance,
Akshay

Same problem we have faced after implementation of budgetory changes.
SAP recommanded changes in program.
Check with sap support.
Regards
Vijay

Excise duty @10% not displaying in printpreview----SAP INVOICE

Similar Messages

Maybe you are looking for