Excise Duty not capturing in invoice

Dear all,
All the configuration have been maintained for Excise duty, while doing PO the excise duty is capturing even doing MIGO and excise captured but during Invoice (MIRO) the excise is not capturing.
Regards,
Raziq

Hi Raziq,
When the Excise is Caputred at MIGO system post RE23A Part 1 entry, where as for RG23A Part II entry you need to execute J1IEX.
In this system will show the Excise Duty and it will post the below accounting Entry:
BED Dr
eCess Dr
HECess Dr
CENVAT Clearing Account Cr
Now when you wil do MIRO system will reverse the CENVAT Clearing Entry by creating three lines
Please let me know if you are following above approach or not.
Br,Vivek

Similar Messages

  • Excise duty not apearing while invoice verification in MIRO

    Hi,
    We have created PO with Back date entry eg. 28.04.2010 then received the material in migo on 26.04.2010 also the Excise captured and posted with back date as 26.04.2010.
    Now ewhen I am doing invoice verification in MIRO system doesn't propse Excise duty values.
    Please guide.
    Regards,
    Sananna

    hi
    >We have created PO with Back date entry eg. 28.04.2010 then received the material in migo on 26.04.2010 also the Excise captured and posted with back date as 26.04.2010.
    PO date is 28 and GR date is 26 is it so
    on which day ur doing MIRo try to do it on same day as Gr
    please check any error is giving while doing GR
    the error for PRD is may be due to difference in the Gr and miro amounts
    get with more clarification

  • Excise is not captured in MIRO in Dealer Invoice

    In dealer invoice , In PO, for Eg: Basic price : 1000 + vat 200, Total 1200 Rs.
    I have changed excise duty values in MIGO . for Eg: Basic price : 900 + Excise 100, Total 1000 Rs.MRP Indicator activated
    Excise is not captured in MIRO.
    Regards.,
    Lakshmanan.S

    In case of dealer invoice you will have to change the Tax code in MIRO in your case to get the Excise calculated.
    Other way is you take excise credit first with J1IEX clicking MRP indicator and properly takin excise credit, after that MIRO will automatically take excise in to accounts.

  • Excise duty not capured..?

    Hi gurus
    Can anybody giv  some inputs..
    I hav recd goods, excise duty not capured thru J1IEX, material was consumed,
    In this case how can i capture the excise duty after MIGO..?
    Please explain me some inputs..?
    Thanks
    sap-mm

    Hi,
    You can pass JV with transaction code J1IH by selecting "additional excise' tab.you can give the amounts and also excise invoice number
    regards.
    prasad

  • Excise is not captured for all or Second line item.

    Dear Experts,
    Excise is not updating for all the line items in while making Goods Receipt.
    while making goods receipt excise is not capturing for all the line items.
    but excise is captured at header level,its presumed that all the line items
    are capturing excise,please suggest me,what might be the reason.
    Thanks in advance.
    Varun

    Hello,
    As i think, you are creating Goods receipt With Excise option "Only Part1" in MIGO, then system will update only J_1ipart1 table with qty and without internal document number, after J1IEX only system will Update J_1IEXCDTL  table with all value and qty and internal document number.
    Suppose you have done the GR -Option' 'No excise entry" then system will not generate any Excise realted tables. Then you should  Capture Part1 entry with help of J1I5 t code, then system will update qty field , here also system will not update internal doc number.
    Write a Updation program for J_1IPART1 table for qty field
    Mahesh Naik

  • Excise Duty Not appering in GR

    Dear all ,
    Excise Duty Not appering in GRn for PO  ,what may be the possible reasons ?
    Pl guide

    Hi,
    Pls check the J1ID
    1. Material maintained in J1ID for that plant
    2. Input and output material declared for the plant
    3. Vendor excise maintained
    4. Excise indictaor for the vendor maintained
    5. Plant excise details maintained in J1ID

  • Excise duty not reversed even after Excise Invoice is reversed

    Hi Experts,
    Please give me solution for  excise Inv. no 1000200212 dt. 06.09.10 has been reversed in the Sap in J2IUN report ,the excise duty against Inv no 10000200212 is not reversed & is reflected in duty payble amount. At the same time stock of the Inv. no. 1000200212 has been reversed in the stock ledger.
    The cancell invoice should not appear for duty payment statement in the J2IUN.
    Rgds
    Shailesh W

    Hello Sir,
    I will provide u further details for this Issue.
    This is to inform you that excise Inv. no 1000200212 dt. 06.09.10 has been reversed in the Sap & fresh Inv no 1000200214 dt. 06.09.10 is prepared .We have noticed that in J2IUN report ,the excise duty against Inv no 10000200212 is not reversed & is refected in duty payble amount. At the same time stock of the Inv. no. 1000200212 has been reversed in the stock ledger.
    As per our understanding,the cancell invoice should not appear for duty payment statement in the J2IUN.
    You are requested to check the same at your end and let us know the reason for the same.
    We are post the excise document in month of april 10 vid doc. no.10000021 dt. 02.04.10 7 10000057 dt. 10/04/10 and same is reversed vide do. no 1000074 dt. 02/04/10 &  25000003 .
    While arriving the duty payble amount, we are found following discrepancy in J2IUN (Z-Report) & FBL3N (G.L) Account
    Duty payble fig. As per J2IUN    Rs. 9482.00 (Basic)
    Duty Payable Fig. As per FBL3N Rs. 7247.00 (Basic)
    Diff. Rs. 2235.00
    The diff. due to reversal of excise posting document not a/cted in J2IUN Report.
    Rgds
    Shailesh W

  • Excise Duty not updating in Billing & Excise Invoice

    Dear SAP Guru,
    Kindly help me to solve 2 issue as mention below :
    1. Excise duty is not flowing in my billing document when i am creating commercial invoice. Also in my excise, I am getting excise duty 0.
    2. When i am creating commercial invoice, the net amount is showing me in dollars but at the time of creating excise invoice it should show me in Rs? Which is not happening.
    Please guide me what are the setting i have to check to fix my problem
    Thanks in advance.
    Also kindly send me the CIN Configuration along with the snap shot to my email id : [email protected]
    Thanks & Regards,
    Rajan

    > Dear Lakshmipati,
    >
    > Plant has been specified in the SO but still excise
    > duty is not flowing to my document.
    >
    > Thanks
    >
    > Rajan
    Dear Rajan
    You can check in the following
    1) In J1ID, select "<i>Excise Tax Rate</i>" and ensure that for the chapter ID, you have maintained 16%
    2) In J1ID, select "<i>Excise Indicator for Plant</i>" and ensure that for the combination of Company Code and Plant, "1" is maintained on the extreme right side.
    3)  In material master, select "<i>Sales: sales org.1</i>" and ensure that "<b>1</b>" is maintained for "<i>Tax Category - JTX1</i>".
    Thanks
    G. Lakshmipathi

  • Excise invoice - basic excise duty not appearing

    Hi,
    I am creating excise invoice in ECC 6.0 . Education cess is appearing in the excise invoice. However, basic excise duty and secondary education cess are not appearing. I understand that some notes have to be applied for secondary education cess. 
    I am using TAXINN.
    In accounting document, basic excise duty, education cess and secondary education cess are appearing.
    Kindly reply as to the place where I have made a mistake for setting of basic excise duty.
    Regards,
    T Saravanan

    Dear  Saravanan,
    Already our friend MBS suggested in detail to that
    Please check the configuration settings in the IMG through this Path
    IMG>Logistics General>Tax on goods movements>India>Basic settings>Determination of excise duty>Maintain Excise defaults here have you maintained basic excise duty and secondary education cess condition types for your TAXINN procedure.
    Also check the commercial invoice have you getting basic excise duty and secondary education cess in the commercial invoice.
    Is this first time you are trying to create excise invoice or recently you are getting this issue.
    If you are getting suddenly means ask BASIS people are they applied ant patches recenlty then proceed accordingly.
    If all settings are perfect then you can raise the OSS note to the SAP people.
    I hope this will help you,
    Regards,
    Murali.

  • Excise Duty Not  geting calculated in Export excise Invoice

    Hi;
    As subject line specifies; in J1IIn for export excise invoice after pressing the calculate button system does not calculate the excise duty in document. This leads to no value in ARE1 & no consumption of  bond Value.
    Kindly let me know  what kind of data is missing.
    Avinash

    Hi Avinash,
    Could you help yaar ...if you got solution for it ..I am facing same problem..We are going live very soon,
    help of ur's could help me lot ..My mail id [email protected]
    Thanks in advanec in for your help.
    regards,
    Vijay Khochare

  • Excise duty value on sales invoice not reflecting in the actual cost

    Hi,
    we are paying excise duty, when we are removing material from plant for the particular project. Now excise duty paid is reflecting properly in the actual cost colunn of the the report s_alr_87013558. Secondly when we are rasing commercial invoice to the customer & excise duty paid earlier is recovered from the customer, now excise duty recovered from the customer is not being reduced from the actual cost.
    Cost elment for excise duty paid - 6101100, with category 1 - primary cos/ cost reducing revenue.
    Cost elment for excise duty recovered -  3801090, with category 11 -  Revenue.
    Kindly guide how to update(reduced) excise duty revocvered in the acutal cost.
    regards
    Sanjay

    Hi Mohan,
    Please use the formatting options to format ur question...!!
    Thanks,
    Tatvagna.

  • J1iex "capture excise duty" not updating Part1

    Hi MM masters,
    we have configred for capturing excise duty in MIGO and it is working fine. Now case is that when we are selecting "no excise"  at MIGO in excise tab and capturing excise at J1IEX "Capture excise Duty" with ref. of Material Doc. it is not updating Part 1.
    Pls note that J1ID is maintained for vendor & Materail.
    Thanx in advance.
    Ajeet

    Hi Ajeet,
    Please refer the below links. You may find some useful information.
    part1 and part2 problem in j1iex because of partial cancellation of MIGO
    excise duty
    Excise Duty
    Warm regards,
    Murukan Arunachalam

  • Excise duty not getting captured for export scenario-Urgent

    Dear All,
    When I am creating the export sales scenario then excise component is showing in condition records, even while creating the excise invoice the excise component reflects in the invoice. But once the excise invoice is saved & i go to display of excise invoice then the excise components are coming as zero.
    During creation of excise invoice if i click on utilization button and come back on main screen without any changes, then also the excise component are getting nil.
    Can anybody please suggest the reason & solution for this.
    Thanks & Regards,
    Antima

    Dear Antima
    1)  Go to Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Registrations.  Here see for your Excise Registration, whether the box is selected for "AED" and "AT1".
    2)  Go to Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Groups.  Here see for your Excise Group, the box is ticked for "Automatic Posting".
    I think somewhere your settings in this area (Tax on Goods Movements) is missing and I cant figure out exactly.  Anyway please check the above two areas.
    thanks
    G. Lakshmipathi

  • Excise Duty not calculated at MIRO

    Hi
    We have upgraded the patch level of SAP_APPL  from 10 to 11. Now, in PO we have assigned a tax code for calculation of excise duty at 14.42%. In the tax details in PO Items, system is showing the calculation of excise duties correctly.When the excise invoice from vendor is posted through J1IEX . Here the system is passing the entries
    BDE Dr
    Cess Dr
    SECESS Dr
           Cenvat Clearing A/c Cr
    When we do MIRO, system is passing the following entries
    GR/IR Dr
         Vendor A/c Cr
    The correct entries to be passed shoudl be
    GR/IR Dr
    Cenvat Clearing Dr
             Vendor A/c Cr
    When we were on patch 10 for SAP_APPL, system was passing the entries correctly. However, after the upgradation, system is not capturing the excise details. We have maintained all the related configuration in J1ID and also maintained the condition records in FV11.
    Regards
    Sanil Bhandari

    Hi,
    Check whether "GR based IV" is active for the PO line item under "Invoice" Tab. If not then active and check or do a complete new cycle with this indicator as active and check.
    Also check that in MIRO, you are selecting the tax code of PO at Header level in "Basic Data" Tab also.

  • Excise Duty Not to be Collected from Customer

    Dear All,
    I require help in a scenario, wherein company has already paid excise duty
    to produce the goods but does not collect it from the customer for any
    footwear pair which has been priced less than 250 Rs.
    The company wants excise to appear in the sales invoice so that excise
    invoice can be captured.
    Require your suggestion in configuring this scenario.
    Thanks and Regards
    Adithya

    You have not indicated what will happen if the price is above INR 250.00.
    If the requirement is excise should not be collected only if the value is below INR 250.00, then, through standard it is not possible.  Through exit you can control this.  On the other hand, if you dont want to debit the customer for excise duty irrespective of invoice value, then set the excise condition type as statistical, so that excise invoice can also be generated.
    G. Lakshmipathi

Maybe you are looking for