Excise err while created OR

D/ Friends,
While creating OR error: u201CExc. Tax ind. Not maint. For 1 1- please maintain. Message No. 8I 004. Diagnosis: The excise tax indicator is not maintained for the specific combination. The indicator is needed to determined the excise duty rate.u201D
J1ID is maintained.
FTXP is maintained.
CIN config is maintained (Weu2019re using TAXINJ).
Tax Defaults are maintained.
What else left?
Pls advice.
Thank you.

Dear HANT,
Do check following master data is maintained or not,
1) In material master, select "Sales: sales org.1" maintain "1" is maintained for "Tax Category - JTX1".
2) In Customer MASTER Data under CIN tab for Excise Indicator Field do maintain as "1".
3) In Customer MASTER Data under Billing tab maintain "1" is maintained for "Tax Category - JTX1".
Regards
AJIT K SINGH
HAPPY TO HELP U

Similar Messages

Err while creating Index - ORA-29855: ,ORA-20000

Got err while creating index. We moved the Table to new tablespace and drop the index. While creating index got this err. Col1 is clob datatype.
SQL> CREATE INDEX kc_ctx_RAWTEXT ON RAWTEXT
2 (col1)
3 INDEXTYPE IS CTXSYS.CONTEXT
4 PARALLEL ;
CREATE INDEX KC_CTX_RAWTEXT ON RAWTEXT
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-50857: oracle error in drvddl.ParallelIndexPopulate
ORA-12801: error signaled in parallel query server P020
ORA-20000: Oracle Text error:
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.DRVPARX", line 36
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 364

remove parallel clause and try again

BED is Getting Double in MIGO while creating of RG23D entry

Hello,
While we have procuring some material to DEPOT directly from vendor. As per government rule we are maintaining the ZMRP and ZABT condition types in Pricing procedure
In Pricing procedure
10 ZMRP Step from 0 to 0
20 ZABT Step from 10 to 0
30 Sub total from 10 to 20
ZED% is calculted from this step "Amount for ED Calculation"
means the BED is calculted on MRP-38%Abartment charge.
means BED=ZMRP-ZABT%*14%
We have assigned Subtotal 5 against the ZED% condition in our pricing
procedure.We understand that subtotal 5 should not be used for non
deductible BED as it is used only for Deductible BED.But we are
procuring the same material in manufacturing plant as well therefore we
are using Subtotal 5 in the pricing procedure.
If we use ED setoff tax code then BED is taking correct value from JMO1
condition
In DEPOT the ZED% 14% from Pricing procedure and JMO2 from Tax procedure it is adding in MIGO Excise tab while creating the RG23D entry .why it is behaving like this
Please let us know Why it is behaving erraticaly in DEPOT?
Regards
Mahesh Naik

Please check ur setting of maintainexsice defaults.
BED condition type should be properly maintained.
regards,
Sujit

Error while creating Excise Invoice

Hi All,
Can any one help me on CIN?
I am getting one error while creating "Excise Invoice [T.code J1ILN]" i.e. "System failure during locking GL account Cocode by 13113910"
Regards
Chowdary

Dear Raghavendra
Please make a try with the following but I am not sure whether it will solve your problem.
Go to FS00, give the G/L account which has the problem and select "Control Data" tab. Here punch as asterisk in the field "Tax category" and save.
Now try to create the excise invoice.
Thanks
G. Lakshmipathi

Error while creating excise invoice cancellation thru J1IS(J1IEX Invoice)

Dear All,
While creating cancel of purchase excise invoice with reference to J1IEX Internal Invoice No. system is throwing a error
"Error updating table J_1IEXCHDR"
Message no. 8I308
Suggest me asap,.
Thanks & Regards,
Radhika

Hi Radha,
Check the ETT Table (Excise accounts assignment table) in the config have assigned the relevant gl accounts for TType - CEIV Update all the gl accounts in the table.
Verify the node--> Specify Excise Accounts per Excise Transaction --- debit and credit account names to the TType -- CEIV
Credit -- CENVAT Suspence
Cr         RG23 AT1
Cr         RG23 BED,RG 23 ECS,
Dr         CENVAT Clearing
Dr         PLA BED, PLA AED, PLA SED
Dr         RG23 AED, BED, SED
Same should be assigned for Sub-Transaction Type '01' for CEIV Type.
Thanks,
padmaja

Create Excise invoice(J1IIN) document while creating billing document using bapi BAPI_BILLINGDOC_CREATEMULTIPLE

Dear Experts,
My scenario is:
We have batch split scenario, where the parent line item of billing document has 0 quantity and its subsequent item (item with batch number) holds actual quantity data.
When we create billing document using VF01 against delivery document, system creates billing document along with excise invoice document (J1IIN Document). And in excise document contain same number of line items that of billing document. Please see the below attachment:
Biiling document screen shot:
While creating billing document, the J1IIN Document created automatically. Below is the screen-shot for the same.
Now the issue is:
When we create billing document using BAPI: BAPI_BILLINGDOC_CREATEMULTIPLE system creating only billing document and not creating excise invoice document.
When we create excise document manually using J1IIN the zero quantity line items are excluded in excise invoice document.
Please see the below screen-shot for the same; The z quantity line items are missing.
We want excise document to be created while creating billing document using BAPI BAPI_BILLINGDOC_CREATEMULTIPLE. Or is there any other BAPI for the same purpose.
Customization is also maintained for creating excise invoice document automatically.
Regards,
Rajesh Sadula.

HI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar

8I 681 Error While Creating Excise Invoice

Dear All,
Am getting error 8I 681 error while creating excise invoice,when i analysed since in the document flow the delivery document is not there, only J delivery will be allowed in creating excise invoice.
Our client wants item level milestone,so in oder to activate that i have assigned the billing plan in the item category.But when i assighn the billing plan the system will not allow to put the billing relavance delivery relavant.So i made oder relavan in the billing relavance.So i create an oder and with that reference delivery.But when i create billing i have to refer the oder number,since in the item ctegory i have made oder relavant billing.So the result is in the billing document flow the delivery document is not flowing.Henceforth i could not be able to create J1IN.
But this was not happening in the sand box,but only in the quality since it is superior.when we debugged we found only J(Delivery) is allowed to create excise invoice.
Please help me to solve this issue,is there any possiblity to make the delivery document flow in the billing document.If it is done it 100%possible to create the excise invoice.
Please share your ideas to solve this issue.....
Best Regards,
Venugopal

Dear Lakshmi,
Thanks for your Prompt reply...
In our case delivery is there,but when we create the invoice the delivery document is not flowing,since in the itemcategory oder relavant billing.We have billing milestone at the item level,for activating that i have to make the billing relavance as I.Other wise the system is not allowing me to select delivery relavant and billing plan.Please help me to make the delivery document flow in the billing document.Then this 8I error will be solved.
I have alsochecked the update document flow,everything is perfect.
Regards,
Venugopal

Error while creating excise invoice J1IIN

Hi all,
I am into an implementation project where I am configuring CIN for Factory sale with Excise. I have gone through all the setting and done it according to the documents available. But while creating out going excise invoice (J1IIN) system giving an error "Customization for sub transaction type is missing in table excise accounts". I dont want to use a sub transaction type as there is not much variation in scenario here. However I created a new sub transaction type (SPROLogistic genTax on goods mov-Indiabasic settingmaintain sub transaction type) and assigned it Transaction type (SPROLogistic genTax on goods mov-IndiaAC determination-specify excise account per excise transaction) and G/L (SPROLogistic genTax on goods mov-IndiaAC determination-specify G/L ac per excise transaction). But still the same problem is keep coming. Also I have tried making this sub transaction type as default (SPROLogistic genTax on goods mov-Indiabusiness transaction outgoing excise invoice--- maintain default excise grp and series grp). but the issue remains unresolved.
More over while doing J1IIN i have also tried selecting the sub transaction type from drop down list but the list is empty and the massage displayed is "No values found"
kindly help,
BKR

Hi,
Yes I hv already maintained the sub transaction type for Excise TT DLFC (goods removal through sales). the entries what i maintained is as given below
DLFC          Credit     PLA AED account
DLFC          Credit     PLA BED account
DLFC          Credit     PLA cess account
DLFC          Credit     PLA SED account
DLFC          Credit     RG 23 AED account
DLFC          Credit     RG 23 BED account
DLFC          Credit     RG 23 SED account
DLFC          Debit     CENVAT suspense account
DLFC     10     Credit     PLA AED account
DLFC     10     Credit     PLA BED account
DLFC     10     Credit     PLA cess account
DLFC     10     Credit     PLA SED account
DLFC     10     Credit     RG 23 AED account
DLFC     10     Credit     RG 23 BED account
DLFC     10     Credit     RG 23 SED account
DLFC     10     Debit     CENVAT suspense account
Here "10" is my sub transaction type. I have maintained DLFC with and without sub transaction type for each account name. But that did not resolved the issue. More over is it mandatory to give a sub transaction type? Is there any way so that I can continue without sub transactions?

Excise Invoice Not creating automatically

Hello!
while doing Billing document using VLO1N,Excise invoice is not creating for a particular material. I checked Material Master for this particular item.I compared the Material Master for the item which is creating Excise Invoice automatically and the for the item Excise Invoice not creating automatically. Every thing is same for both the items but the excise invoice is creating automatically for one material and same Excise invoice is not creating automatically for another item.I don't know where is the exact problem is.could anyone tell me why the Excise Invoice is not creating for the particular item.
-M.Suba

Excise Invoice creation depends on Customizatoin of Excise group which is specific to Plant.
Check Customization settings-
IMG: Logistics General - Tax on Goods movements - INDIA - Basic Settings - Maintain Excise Group,
select your excise group & choose details,
You will observe, check box " Excise Invoice during Billing" in 'Outgoing Excise Invoice' section. This check box should be marked.
Note: To create Billing documents - Tx :VF01 is used , not VL01N ( this is for Creating Outbound Delivery document)
Regards,
Reazuddin MD

Error while creating J1IJ w.r.t Delivery document

Dear All,
I am getting an error while creating an outgoing excise invoice for a Depot Transaction.I have an OBD with one line item and the PGI has been done for the same .While going into the J1IJ screen w.r.t to the delivery no .Here for the same OBD i am getting 2 line items i.e one with a zero qty and the other with actual delivery qty .I couldnt figure out this error can anyone help me on this error.
Regards,
Vivek.k

Verify the determination of Storage Location & Warehouse and also
Refer SAP Notes
833748 & 497287

Heap space error while creating XML document from Resultset

I am getting Heap space error while creating XML document from Resultset.
It was working fine from small result set object but when the size of resultset was more than 25,000, heap space error
I am already using -Xms32m -Xmx1024m
Is there a way to directly write to xml file from resultset instead of creating the whole document first and then writing it to file? Code examples please?
here is my code:
stmt = conn.prepareStatement(sql);
result = stmt.executeQuery();
result.setFetchSize(999);
Document doc = JDBCUtil.toDocument(result, Application.BANK_ID, interfaceType, Application.VERSION);
JDBCUtil.write(doc, fileName);
public static Document toDocument(ResultSet rs, String bankId, String interfaceFileType, String version)
    throws ParserConfigurationException, SQLException {
        DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
        DocumentBuilder builder = factory.newDocumentBuilder();
        Document doc = builder.newDocument();
        Element results = doc.createElement("sims");
        results.setAttribute("bank", bankId);
        results.setAttribute("record_type", "HEADER");
        results.setAttribute("file_type", interfaceFileType);
        results.setAttribute("version", version);
        doc.appendChild(results);
        ResultSetMetaData rsmd = rs.getMetaData();
        int colCount = rsmd.getColumnCount();
        String columnName="";
        Object value;
        while (rs.next()) {
            Element row = doc.createElement("rec");
            results.appendChild(row);
            for (int i = 1; i <= colCount; i++) {
                columnName = rsmd.getColumnLabel(i);
                value = rs.getObject(i);
                Element node = doc.createElement(columnName);
                if(value != null)
                    node.appendChild(doc.createTextNode(value.toString()));
                else
                    node.appendChild(doc.createTextNode(""));
                row.appendChild(node);
        return doc;
public static void write(Document document, String filename) {
        //long start = System.currentTimeMillis();
        // lets write to a file
        OutputFormat format = new OutputFormat(document); // Serialize DOM
        format.setIndent(2);
        format.setLineSeparator(System.getProperty("line.separator"));
        format.setLineWidth(80);
        try {
            FileWriter writer = new FileWriter(filename);
            BufferedWriter buf = new BufferedWriter(writer);
            XMLSerializer FileSerial = new XMLSerializer(writer, format);
            FileSerial.asDOMSerializer(); // As a DOM Serializer
            FileSerial.serialize(document);
            writer.close();
        } catch (IOException ioe) {
            ioe.printStackTrace();
        //long end = System.currentTimeMillis();
        //System.err.println("W3C File write time :" + (end - start) + " " + filename);
    }

you can increase your heap size..... try setting this as your environment variable.....
variable: JAVA_OPTS
value: -Xms512m -Xmx1024m -XX:PermSize=256m -XX:MaxPermSize=512m

Short Dunp While Creating a BP - Awarded points

Hello Guru's,
We have Implemented Accounts & Contact Magt in SAP CRM 4.0. I got a Ticket saying - An Account (BP) has created just and While Creating Contact person to the above Account they found a Short Dump.
500 SAP Internal Server Error
Err Msg: Error PXA_NO_FREE_SPACE occured. P1=3381248 P9=143360 (Type of termination: RABAX_STATE).
I tryed with Tcode ST22 in ABAP Runtime Error but i don't see any Shortdump. However the above error seems like No Free Space available. what could be the reason of the above Issue.
Could you Pls let me know the Solution & Ways to resolve the above Issue.
Awarded points for the best solution.
Srujan

Hello Srujan,
The PXA_NO_FREE_SPACE dump means that the program buffer, that is the buffer used to execute programs, was too small at the time of the execution; it could not store the application data and therefore dumps the application. This could be the result of a high system load (many people running many transactions/programs) or that the system parameter abap/buffersize is set too small.
Note that this problem is mostly temporarly, if it occurs often you should increase the physical amount of memory or increase the program buffer size.
Check OSS note 147568 for possible solutions and how to determine the correct amount for the system parameter abap/buffersize.
Hope this helps!
Reward points if useful!
Kind regards,
Joost

Error while creating billing documents

Hi,
While creating billing documents I am getting error message as
Maintain customizing for excise and series group determination
Message no. 8I619
I have check the setting for CIN it is OK excise and series group are maintain properly so what can be the proble,
regards,
zafar

Hi,
Check once again customizing
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
- Define excise series groups based on type of outgoing document
- Assign series group to excise registration ID
- If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
- If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator. Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
- No account postings for CENVAT in sales cycle
- No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Thanks
Chidambaram

Issue while creating a GR

HI Guru's
While creating a GR in migo ,i am facing a problem "Excise invoice cannot be captured for RG1(finished goods) material.
Pls help me out.
Rgds,
cherukuri..

when i click the error it was displaying the following ,
Message Text
Excise Invoice cannot be captured for RG1(Finished Goods) material
Technical data
Message type__________ E (Error)
Message class_________ 4F (Message class for India localization)
Message number________ 276
Message variable 1____
Message variable 2____
Message variable 3____
Message variable 4____
Message attributes
Level of detail_______
Problem class_________ 1 (very important)
Sort criterion________
Number________________ 1
Environ.information
Global counter________ 000001
Field name____________

Error While creating Subcontracting challan in J1IF01

Hi,
While creating Subcontracting challan in J1IF01Im getting error " Deficit of 3.2000000000000002E+00 in RG23ABED".
Any suggestion in this regard is very helpful.
durga
[email protected]

Hi,
You are referring the material challan, which is not posted for Sub-Contracting PO. Pl. check your Material document number. Also pl. check that plant is same in material document & s/c Challan.
Excise values are not appearing in the S/C Excise Challan, because you are sending the excisable material to your sub-contractor without paying any excise duty. When you reverse & recredit the S/C Challan, it will show the Excise Amounts.
Regards,
Prashant Kolhatkar

Excise err while created OR

Similar Messages

Maybe you are looking for