Excise extraction UOM error

Dear All,
We have a problem with excise register extraction. For a material we maintain basic unit of measure as TON and unit of issue as KG. The problem is in excise register RG23A extraction i.e.
we buy 10TON of the material so rg23a part 1 up dates as 10+
Now we issue 1000 kg now in register rg23a updates as 1000- so balance quantity we get as 10 - 1000 = -990
really it should be 10ton - 1 ton (1000) = 9 but this is not happening please help..
Thanks i advance
Regards
Arjun

Hai
I have maintained Base UOM as TON and unit of issue as KG. conversion 1000kg = 1 TON
Dear brinda
Where should this user exit be applied at MIGO? Will the exit cause the updation of rg23a part1 in base unit of measure?
Is there any note available for this purpose?
Please help

Similar Messages

While excise posting, an error is coming "Balance in Transaction Currency"

Dear all
While capital excise posting, an error is coming "Balance in Transaction Currency" for the capital goods posting.
During the excise duty posting J1IEX our clint done some manuvall entry for excise duties so
at the time its 0.01 diffrence is coming in balance thats why we are not able to post the document.
so please can any one give the solution for this
regards
pramod

hi
Check Excsie duties in "Excise Duty" Tab at Item Details level.
Kindly note that all the duties (BED, ECS and SECess) in case of RG23C Part II posting must be in EVEN numbers.
For e.g. Check whether SECess is 10.63 (ODD No) then make it either 11.00 or 10.64 or 10.62 i.e. EVEN No otherwise during Part II posting it will always show balance of 0.01
Check how much piase is the difference. Then you can decide how many values to be rounded off.
To avoid this type of problem better to ensure all amounts ( BED, Ecess and Hr Ecess) are in Even figures.
hope it clears
regards
kunal

Cannot extract fonts error message even after fonts outlined

will not allow me to attach screen shot from grab. Image not allowed is error message

Grab saves files to tif format, you need a web format (jpg, png, gif) to post to these format. Rather than grab use preview app.
preview application >> file >> take screen shot >> save as file type png
Now the cannot extract fonts error, could be fixed possibly by an illustrator free update, don't know the verison you are on
http://www.adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh
Reset your illustrator your prefs.
Does this happen to all files, or is this just a certain file. You may have a font in a symbol or opacity mask.
Save a copy of the document, keep deleting items, unitl the error goes away. This will identify the problem item, of which we better help you by narrowing the variables down.
When fo you get thgsi error, upon opening the file?

Extracting files error on WindowsXp,Service Pack 3

Extracting files error on WindowsXp,Service Pack 3 I'm just staring to use CS3. I'm running Windows Xp Professional
Service Pack 3.
the CS3 files are in the compact form and when I run the file ADBEPHSPCS3_WWE, I get the following messages
Preparing Files
Please wait while the downloaded files are being extracted
Then I get
A problem occurred while extracting some files. Check space on your computer and the write priviliges on the
destination folder.
This message occurs when processing the file
...\redist\WindowsXP-kb898715-x64-enu.exe
The machine am instaling on has over 25G of free space.
Please HELP
Thanks johns

Installation preparations
Mylenium

Excise Invoice UOM should Post Based on Chapter ID

Hi All,
Greeting for the day!!!
We have a requirement, like Billing document create in Uom like EA. But Chapter Id for that materials are like KG.
When I create excise invoice UoM Should post in KG's.
for this what we have to do.
Please do needfull.
Thanks and regards,
Prasad.

Hi Laxmipathi,
Thanks for your quick reply.
I will try this and let you know.
Regards,
Prasad

Incorrect call-up of the extraction program---error while extraction

Hi All,
We are loading the data first time(Full update) in BW Production we are getting the below error.
Error message is as follows:
Incorrect call-up of the extraction program R3 8
Errors in source system RSM 340
Details of error are as follows:
Requests (messages): Everything OK
Extraction (messages): Errors occurred
Error occurred in the data selection
We request you help for correcting this error.
Regards
Deva

Hi ,
Here is little more info about error details we see in Status tab of monitor.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
regards
Dev

Excise Invoice creation error -Billing document does not exists

Dear Experts,
I have created supplementary sales order, billing with refernece through sales order by VF01.
Now I want to create Excise Invoice but system gives error Billing Document does not exists
I have checked billing document in VBRK table & it is showing in table.
My item categroy is L2N -and set it to C
I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
Pl. guide me.
Thanks
Trupti

Resolved my problem.
Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
outbound delivery.
So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
Thanks to all.
Trupti.

Invalid Extract Structure error while creating "Generic DataSource" on a view...

Dear All,
I have created a view on following tables MARA, AFKO and MSEG. The Table/Join condition is as follow:
AFKO--AUFNR = MSEG--AUFNR
AFKO--PLNBEZ = MARA--MATNR
I have included all the fields from MSEG and other all fields from MARA and AFKO. The view is created successfully and contents/records are also being fetched/displayed from this view.
See screen shot as well:
But when I go to RSO2 to create a "Generic DataSource" on this view. I get a series of warning messages and then error message "Invalid Extract Structure" and therefore I'm unable to create my DataSource on this view. See below screen shots of warning and error messages.
Other warning messages are as follow:
Field GAMNG with reference field MEINS: Reference table MARA is replaced by ZOXPRD0150
Field PLSVB with reference field PLNME: Reference table PLKO is replaced by ZOXPRD0150
Field PLSVN with reference field PLNME: Reference table PLKO is replaced by ZOXPRD0150
Field LODIV with reference field MEINS: Reference table MARA is replaced by ZOXPRD0150
Following is the screen shot of error message:
1. How can I get rid of this error message and be able to create my "Generic DataSource" on top of this "View"?
2. What should I do to resolve the above warning and error messages?
I will appreciate your reply.
Many thanks!
Tariq Ashraf

Hi Vipul,
as you can find in CKIS table, the reference feild for value feild "WERTN" is missing.
As per the table the reference feild is HWAER. This should have been used in place of FWAER.
Try mentioning this in your view and this should work.
Also I am a little enthusiastic to know, what are you trying to get from the datasource.
If you are trying to get the cost estimate of multi level BOM, not (just one child level), then this approach may not work.
There is a BAPI that gives such itemization split. Just FYI, in case you are looking for multi level explosion.
"BAPI_COSTESTIMATE_ITEMIZATION".
Hope this helps.
Naveen.A

UOM error in Material master.

Hi
When we log on to Spanish language, we are getting error in material master for Unit of measure, that the unit of measure has not been created in the language ES. But same UOM has configured in EN language and its working fine for material, while in Spanish language it appear as *** with error details,
Could you please suggestu2026
regards
Vanraj

Hi,
Extactly you are right..you got to Logon in Languange ES and create the required UOM in t-code CUNI...
this shuld solve the issue..try and revrt back..
Also,In CUNI on top menu Go to-Translation-UOM here maintain Source lang to Target lan
Reg,
JJ
Edited by: Jagsap on Apr 20, 2010 4:10 PM
Edited by: Jagsap on Apr 20, 2010 4:15 PM

Excise modvat accounts error during creation of 57FC challan.

Hi,
I am creating a subcontracting challan (57FC) vide transaction J1IF01. I have maintained the below mentioned Excise Accounts per Excise Transaction:
57FC CR Credit PLABED PLA BED account
57FC CR Credit PLAECS PLA ECS Account
57FC CR Credit PLANCD PLA NCCD Account
57FC CR Credit RG23AT1 RG 23 AT1 Account
57FC CR Credit RG23BED RG 23 BED account
57FC CR Credit RG23ECS RG 23 ECS Account
57FC DR Debit CLEAR CENVAT clearing account
57FC 1 CR Credit PLABED PLA BED account
57FC 1 CR Credit PLAECS PLA ECS Account
57FC 1 CR Credit PLANCD PLA NCCD Account
57FC 1 CR Credit RG23BED RG 23 BED account
57FC 1 CR Credit RG23ECS RG 23 ECS Account
57FC 1 CR Credit RG23NCD RG 23 NCCD Account
57FC 1 DR Debit CLEAR CENVAT clearing account
But I am still Getting the Error, u201CExcise modvat accounts not defined for 57FC transaction and 21 excise group: Message no. 8I402u201D.
Can somebody help?

Hello,
Check below given
In SPRO > Logicstics general > Tax on goods movement > India > Account determination > Specify Excise Accounts per Excise Transaction > Here maintain ETT "57FC" with Subtrans Type "01"
And go to SPRO > Logicstics general > Tax on goods movement > India > Account determination > Specify G/L Accounts per Excise Transaction > Here maintain GL Accounts for ETT "57FC", Excise Group "G1" with Subtrans Type "01"
Then try creating Subcon Challan in J1IF01 then check i hope you will not get the error message.
Regards
Mahesh Naik.

Maintain Vendor Excise details - MIGO error

Hi all........
Im doing Stock transfer from one plant to another plant within a company code through stock transport order.
I created STO in receiving plant, after the I created outbound delivery in VL10B and PGI in VL02N in supplying plant. With Post Goods Issue Material document I created Excise Invoice in J1IS.
While doing MIGO in receiving plant I hve to enter the same Excise Invoice number which I created in supplying plant.
When I enter the EI number system is recognizing the number. But the problem is when I click on save its giving error "Maintain Vendor Excise details".
In sto we will not mention any details then y system is giving this error.
Please suggest.
reg
Durga Ram

Hi Durga
There are few check points to resolve this problem
--Check for vendor master for plant XYZ & in control data we have to maintained the customer no. e.g. 999 for XYZ
---Check in J1ID Chapter id,Material and Chapter Id Combination whether you have maintained or not, if not maintained it
--- Check J1ID whether you have maintained the Vendor excise Details for That supplying plant, if not Maintained it.
i hope this will get resolved your problem
Thanks

R/3 SP Import:Open data Extraction requests Error

We are getting the below error when Basis doing the upgrade support packeage in R/3 source system.
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests.
Intially we have cleared the entries in LBWQ,RSA7 and SM13.But after clearing these entries also we are getting the same above error.
For support package upgrade in R/3 do we need to delete the SETUP table also in production environment?.
Is there any other way around without deleting the setup table to upgrade support package in R/3 system?
Please help us with your inputs urgently..
Thanks
Message was edited by:
Ganesh S

Thanks Siggi for the suggestion.
We have already cleared the v3 updates by running RMBWV* job manually.After clearing all the entries in LBWQ,RSA7 and SM13 still we have got the same above error.
When we imported In R/3 development system after deleting the setup table we didn't get the above error.But we are concerned about deleting the setup table in production system
though already deltas are running fine.
Is there any other way around? or deleting the setup table is the only option?
Please help...

UOM error while creation of Shopping cart.

Hi guys,
Can any one help me?
I have a problem with UOM as PCE = piece, The UOM is already there in the SRM and found that the same is not there in my backend system.
So now I have maintained the UOM in the backend system also with that of same in the SRM system. with following attributes.
Internal measurement unit as PCE
Commercial name = PCE
Technical name = PCE
ISO code = PCE
in application paramentes I have checked the the box commercial measure ment unit.
I mean I have maintained the same as that of in SRM.
Now when I tried to create a shopping cart and approved it. it shows as error in process UOM not defined in the backend system. Is it so the same ISO code has been assigned for more than 2 UOMs?
Please suggest how to resolve this? also Do I need to tick the primary code box also?
Best Regards,
Sairam.

Hello Laurent,
Thanks for your reply, But let me explain you, The UOM PCE = piece is existing in the SRM right from the beginning , which has not corresponding UOM maintained in the backend system.
So now I simply maintained all the attributes of UOM, same like in the SRM.
By simply ticking the Primary code will this solve my problem? or, shall I really have download the UOM through R3AS from backend to SRM?
Can you please suggest?
Best Regards,
Sairam.

Core dump when starting extract, no error messages

Hello,
This is a basic one way replication, Data Pump and Replicat start but Extract stops at once.
In ggserr.log there's only a message: EXTRACT EORATE02 starting, nothing else. In ggsci it can be seen that it's stopped.
CHECKPARAMS didn't give the message "Parameters processed successfully", neither did it give error messages
when starting the extract.
There are no old Oracle processes which could prevent Extract from starting.
There's EORATE02.pce in dirpcs, although EORATE02 is not running. If I delete it and try to start the extract,
the extract will immediately stop.
A core file has been created in GG_HOME when trying to start the extract. I haven't been able to find out how to read it.
Source and target are on Aix 6100-06. The source database is Oracle 10.1.0.5, target database is Oracle 11.2.0.3.
The installation files are V32435-01.zip for db 10.1.0.5 (ggs_AIX_ppc_ora10.1_64bit.tar), V32437-01.zip
for db 11.2.0.3 (ggs_AIX_ppc_ora11g_64bit.tar). This is GoldenGate 11.2.1.0.1.
The db:s are on Asm.
There's only 1 table in source, 1 in target, they are identical and empty.
There's enough space in the OS.
If I run the extract in OS (extract paramfile dirprm/eorate02.prm), it ends like this without more information:
TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD *********
Abort(coredump)
This happens in both ways of extract described below.
(1)
EXTRACT EORATE02
USERID ggs_owner, PASSWORD [PASSWORD]
EXTTRAIL ./dirdat/data02/te
TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD [PASSWORD]
TABLE USER.myobjects2;
(2)
EXTRACT EORATE02
USERID ggs_owner, PASSWORD [PASSWORD]
EXTTRAIL ./dirdat/data02/te
tranlogoptions COMPLETEARCHIVEDLOGONLY ALTARCHIVELOGDEST /backup/arch_log/abcd/ABCD/archivelog
TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD [PASSWORD]
TABLE USER.myobjects2;
Here's more information on this setup and commands which have been used:
add extract EORATE02 tranlog begin now, threads 1
add exttrail ./dirdat/data02/te, extract EORATE02, megabytes 5
EXTRACT EPMPTE02
PASSTHRU
RMTHOST HOSTNAME, MGRPORT 13447
RMTTRAIL /u01/app/oracle/gg11210/for_11g/dirdat/data02/tr
TABLE USER.myobjects2;
ADD EXTRACT EPMPTE02 EXTTRAILSOURCE ./dirdat/data02/te
ADD RMTTRAIL /u01/app/oracle/gg11210/for_db11/dirdat/data02/tr EXTRACT EPMPTE02, MEGABYTES 5
Target
REPLICAT RORATE02
USERID ggs_owner, PASSWORD [PASSWORD]
HANDLECOLLISIONS
ASSUMETARGETDEFS
DISCARDFILE ./dirrpt/RORATE02.DSC, PURGE
MAP USER.MYOBJECTS2, TARGET USER.MYOBJECTS2;
add replicat RORATE02, exttrail /u01/app/oracle/gg11210/for_11g/dirdat/data02/tr
add checkpointtable ggs_owner.ggschkpt
Grants
Source:
grant connect, resource to ggs_owner;
grant select any dictionary, select any table to ggs_owner;
grant create table, alter any table to ggs_owner;
grant flashback any table to ggs_owner;
grant execute on dbms_flashback to ggs_owner;
grant execute on utl_file to ggs_owner;
grant create session, alter session to ggs_owner;
Target:
grant create session, alter session, resource, connect, select any dictionary to ggs_owner;
grant select any table, insert any table, update any table, delete any table to ggs_owner;
grant create table, alter any table, lock any table to ggs_owner;
Source
ALTER DATABASE ADD SUPPLEMENTAL LOG DATA (ALL) COLUMNS;
ggsci add trandata USER.myobjects2
mgr.prm
--GoldenGate Manager parameter file
PORT 13346
Target
GLOBALS
CHECKPOINTTABLE ggs_owner.ggschkpt
mgr.prm
--GoldenGate Manager parameter file
PORT 13447
Thanks for reading this far. Possible comments will be much appreciated!
Best regards
Edited by: user11323660 on 14.6.2012 6:39
Edited by: user11323660 on 14.6.2012 6:41

Hello,
Could you wrap your process definitions in proper code brackets so its easier to understand.
Also I'm not sure what your problem is other then you are receiving core dumps. I'm happy to help.
Two small comment though regarding your ASM config
1 . Dont not use ggs_owner as the asm user
TRANLOGOPTIONS ASMUSER ggs_owner@HOSTNAME:1521/+ASM , ASMPASSWORD *********2. Create a TNSNAMES entry for your ASM instance and tehn use the following:
TRANLOGOPTIONS ASMUSER SYS@ASM, ASMPASSWORD *****Also here is an example of an extract process that I've setup on RAC database with ASM
EXTRACT EWFMMTLP
EXTTRAIL ./dirdat/ew
USERID GGATE@MY_DB, PASSWORD ggatehcc
DDLOPTIONS ADDTRANDATA RETRYOP RETRYDELAY 20 MAXRETRIES 5 REPORT
TRANLOGOPTIONS EXCLUDEUSER ggate
TRANLOGOPTIONS ASMUSER SYS@ASM, ASMPASSWORD ****
TRANLOGOPTIONS ALTARCHIVELOGDEST /u02/oracle/fast_recovery_area/MY_DB/archivelog
TRANLOGOPTIONS PURGEORPHANEDTRANSACTIONS
STATOPTIONS RESETREPORTSTATS
REPORT AT 00:01
REPORTROLLOVER AT 00:01
REPORTCOUNT EVERY 60 SECONDS, RATELet me know if that helps
Jan S.

Extracting Pages Error

Hello All,
I have spent over 3 hours working on this and my head hurts reading things that I can't do.
The short version is I have a pdf catalog that had some errors in the pages. They were sent out to have some details corrected. The original file was turned into a form. When the two pages with errors came back I added them to the pdf, copied the fields from the wrong pages and inserted them into the corrected pages. The old pages were deleted to make a nice fresh copy with everything correct.
I am now trying to extract one of those pages with the fields in their correct locations. I am getting this error "An incorrect structure was found in the PDF file" when I try to save the extracted page. I have read about the tagging structure but when I check the document properties it says the document is not tagged.
I am using Window 7 and Acrobat X Standard.
Any suggestions on how to address this would be greatly appreciated.

Good news…. How many pages are you actually going to use. I have only tried two… one was username and password and the other was passthrough with email. Just wondering..
Thanks,
Scott F. Fella
Sr. Network Engineer
CDW Corporation
CDW Plaza - 120 S. Riverside
Ninth Floor
Chicago, IL 60606
Cell: 630-935-7333
e-Mail: [email protected]
From: 48441565T >
Reply-To: "[email protected]" >
Date: Mon, 28 Nov 2011 09:58:35 -0700
To: Scott Fella >
Subject: - Re: How many donwloaded customized web authentication pages can we have in a controller.

Excise extraction UOM error

Similar Messages

Maybe you are looking for