Excise group not appearing in excise no range maintainence session

Hi,
We created a new depot plant and new excise group in golden client.
Transported the same in testing client, excise group is appearing in excise group node.
but in excise number range maintenance session SNRO for object j_1irg23d in testing client, transported excise group is not appearing.
If we enter the same  and move for number ranges system states " Excise group XX doesnot exist"
I checked for excise group intable J_1IRG23D table , excise group xx is appearing.
Please help in this regard
Raju.

Hi,
You need to have an entry of the Excise Group in the table - J_1INEXCGRP.
Mostly whenever the excise Group is created this Table is supposed to be updated with the excise Group, but in some cases it does not.
For maintaining the entry in this table you need to open the client settings.
Just maintain the entry of the Excise Group in this table and Save it.
Regards,
Jeetendra Kulkarni
Mumbai
India

Similar Messages

  • New Excise Group not coming in SNUM (No. Range Maintenance)

    Hi!!!
    I have created Excise Group by copying existing one
    Now, Through T.Code SNUM,
    i am maintaining No. Range for Object J_1IRG23A2
    (i.e RG23A part II number range object)
    However, system is not showing newly created Excise Group against which
    i have to maintain no. range within above object
    However, system is showing new Excise Group in Excise GL A/C Assignments but now in above
    Can anybody guide in this regard?
    Is there any necessity to update any Table manually pertaining to Excise Group through SM30?
    Thanks & Regards...
    Ameya...

    Hi,
    You need to have an entry of the Excise Group in the table - J_1INEXCGRP.
    Mostly whenever the excise Group is created this Table is supposed to be updated with the excise Group, but in some cases it does not.
    For maintaining the entry in this table you need to open the client settings.
    Just maintain the entry of the Excise Group in this table and Save it.
    Regards,
    Jeetendra Kulkarni
    Mumbai
    India

  • Excise Tab not appearing in MIGO Screen

    Excise Tab not appearing in MIGO Screen
    Reg
    Sunil

    Hi,
    For GR, which movement type you are using...?
    If it is 103, you will get the excise invoice tab only in 105 GR.
    If it is 101 only, check the following configuration.
    SPRO-Logistics General-Tax on goods movements-India-Business Transactions-Incoming Excise invoices-Specify which movement type involve excise invoices.
    Please revert for further analysis.
    Regards,
    Siva

  • Excise Values not appearing in MIGO

    Dear All,
    We are using tax procedure TAXINN.
    When I tried to create a GR doc with ref to a PO the excise values are not getting flown from my PO.
    I tried both in MIGO as J1IEX, but the excise values are not getting flown.
    Also please note that for the same PO we have done a GR during the month of Oct & at that time there was no problem & all the excise values was displayed in the GR doc.
    Analysis done till now.
    I have checked the Excise Default settings & I can see the JM0P codtn type maintained under the A/P BED condtn as well as the JE0P Ecess Condtn type maintained under the Ecess AP.
    Also the values are there in the PO which was determined using the condtn records.
    I have also checked the Excise group,plant, company code & Excise G/L determination settings in IMG & everything seems OK.
    But still I am facing the Problem.
    Is there anything which I have missed in the above analysis ?
    Please suggest your val inputs to solve this issue.
    Regards,

    Hi SNB,
    Thanks a lot for the reply.
    As you suggested I havent maintained the condition records for the set off conditions such as JMX1, JEX1 etc..
    When I maintained it the values got displayed.
    Now I have One more query.
    See earlier I have created PO's with out maintaining records for these set off conditions & at that time the values were displayed in MIGO.
    So how the system worked at that time?
    Also note that I havent maintained any of the set off conditions in the Excise defaults (Since these are just statistical condtn types) . Is it OK?
    Also maintaining the set off condition with 100% is a must in TAXINN & Is it Possible to display the values in MIGO without maintaining the records for these condtn types?
    Expecting your reply.
    Regards,

  • Part 1 generated while creating migo but display mode Excise tab not appear

    Hi
    I created migo Part 1 generated. and excise tab also appeared.
    but while display mode Excise tab not appearing. In table J_1part1 Part 1 details are updated.
    Please explain What could be the reason
    Regards
    sitaram

    Hi
    Please any body give me valuable suggesition.
    Thanks and regards
    sitaram

  • Education Cess not appearing in Excise Invoice.

    Hi All,
    Education Cess in not appearing in the Excise Invoice for trading materials.
    G/L Account for Education Cess is same for Regular Materials & Trading materials.
    For Regular materials Ed.Cess appears in the excise invoice only the traded material Ed Cess not appearing.
    Thanks & Regards,
    Hemant Patil

    Hi ,
    Education CESS not appearing in Excise Invoice. It has to checked with the Pricing procedure. Go to VF02 and analyse the pricing updates analysis. Check the ECEss value is coming there are not.
    Then check the accounting document gets generated or not. in that check whether ECess value is posted to concerned GL Account or not.
    Then go J1IIN and check, whether the ECS value flowing there or not ?
    If not u need to look into the Screens with the help of ABAPer.
    Or search for the OSS notes, if not raise the issue to SAP.
    Best Regards
    SRI

  • Excise Group Not Appering in J1I9

    Dear All,
    I am not getting the excise group in J1I9 for number range maintenence for J_1IRG23A1.
    Same excise group I can see in dropdown menu while posting excise invoice in J1IEX, but in J1I9 it s not appearing in dropdown menu.
    In Golden Master Client It is apper, but when i have copy to quality it is not appering, in J_1IEXGRPS table it is fine but J1I9 table it Could not be appering.
    What could be the reason.
    Regards.
    Ramana.
    Edited by: Lakshmipathi on Jan 9, 2012 1:59 PM
    Thread Locked - Reason Cross Posted

    Hi,
    During creation if you copy for the standard and do it i will appear, sometimes when we use the New entries and do it directly will end up in non updation of Tables.
    Regards,
    R.Sudhir

  • Higher Education Cess not appearing in Excise Utilization tab

    Hello Gurus,
    When i create excise invoice, system is calculating the SeCess in the " CREATE EXCISE INVOICE SCREEN". But, the same is not appearing in the excise Utilization tab.  Plz guide to help me solve this issue.
    Thanks in advance!
    Warm Regards
    Prashant.

    hi
    Discuss with your abapper it requires some screen changes in screen painter
    Apply the below note
    Note 1251611 - SECess is not visible in J1IIN
    To correct this issue in transaction J1IIN :
    1. Ensure that you have already applied the corrections suggested in note
    926664.
    2. Run transaction SE80. Enter the program name as 'SAPMJ1IIN' in the
    change mode.
    3. Navigate to the screen 0600 and enter the layout of this screen.
    4. Rename the text fields from 'TAX1' to 'SECess'. Also, do NOT maintain
    these text fields as Invisible in the attributes.
    5. For the I/O field 'TOTALS-TAX1AMT', 'RG23A-TAX1AMT', 'RG23C-TAX1AMT',
    'PLA-TAX1AMT', 'ENT_TOT-TAX1AMT', remove the value 'AT1' from the Group 1
    attribute. Also, do NOT maintain these I/O fields as Invisible in the
    attributes.
    6. Save and activate the screen.
    Take the help of abaper
    Regards

  • Excise values not appearing in MIRO

    Dear All
    I have  created a PO , Made GR  Part 1,2 has been captured ,
    Due to some reasons we cancelled the GR , then we made a new GR for that PO
    Now i get in to MIRO i am not getting the Excise Conditional values , i get only my VAT values.
    Kindly throw light  on this 
    Regards
    R.Rajaram

    Hi,
    Cancel the excise invoice which was posted at the time of previous GRN. Then again post the excise invoice with reference to new GRN Then the excise amount will appear in MIRO.
    Regards,
    Prashant

  • Excise invoice - basic excise duty not appearing

    Hi,
    I am creating excise invoice in ECC 6.0 . Education cess is appearing in the excise invoice. However, basic excise duty and secondary education cess are not appearing. I understand that some notes have to be applied for secondary education cess. 
    I am using TAXINN.
    In accounting document, basic excise duty, education cess and secondary education cess are appearing.
    Kindly reply as to the place where I have made a mistake for setting of basic excise duty.
    Regards,
    T Saravanan

    Dear  Saravanan,
    Already our friend MBS suggested in detail to that
    Please check the configuration settings in the IMG through this Path
    IMG>Logistics General>Tax on goods movements>India>Basic settings>Determination of excise duty>Maintain Excise defaults here have you maintained basic excise duty and secondary education cess condition types for your TAXINN procedure.
    Also check the commercial invoice have you getting basic excise duty and secondary education cess in the commercial invoice.
    Is this first time you are trying to create excise invoice or recently you are getting this issue.
    If you are getting suddenly means ask BASIS people are they applied ant patches recenlty then proceed accordingly.
    If all settings are perfect then you can raise the OSS note to the SAP people.
    I hope this will help you,
    Regards,
    Murali.

  • Excise Tab not appearing in MIGO Screen but getting posted with EI Entry

    Hi ,
    I am excuting CIN ......While doing MIGO, Excise tab is not apearing nowhere in the MIGO screen but entries are being created successfuly in MIRO and posted as well, Entries ....
                                                           GR/IR Clearing A/c Dr
                                                           RG 23 BED A/c      Dr
                                                           RG 23 Ecess A/c  Dr
                                                           RG 23 SHEcess A/c Dr
                                                           Vendor A/c Cr
    Can any one help me and provide solution for this.
    Thanks
    Sukant

    HI,
    Check your excise group settings, in it check migo settings.
    You need to mark tick in all boxes
    EI capture
    Post EI in MIGO
    Duty differenc at GR
    EI create/RG23D selection
    Update RG1at MIGO
    Also check in J1ID trax for the Po material chapter id is maintained.
    Regards
    KK

  • Excise tab not appearing for non cenvatable po

    Hi All,
            while doing MIGO , the excise TAB is appearing for cenvatable items.
    but in case of non -cenvatable item this TAB is not appearing in MIGO, is it like this.
    i have maintained in J1ID the excise material type as non-cenvatable. the excise tab is not appearing in MIGO.
    If i want to have excise tab in MIGO for non cenvatable material, what has to be done ?
    pl guide
    regards

    thanks,
          I have maintained every thing, this TAB is coming for cenvatable material, but not coming for non-cenvatable material.
    the material is excisable but we are not taking cenvat credit. so we have maintained it as non-cenvatable in j1id.
    Any reason that for the exciseable material where we are not taking cenvat credit, this TAB is not appearing?
    pl reply
    regards

  • Excise tab not appearing in GR display

    Hi,
    After creating the Goods reciept, when we display the GR document the excise tab is not appearing. While creating only the excise tab appears and can enter all the excise details. But if want check the values entered in the display mode of the GR, we tab does not appear.
    Please let me know if any customising setting needs to be done so that this tab will appear in display mode also. We are on ECC 6
    Thanks,
    SR

    Hi,
    As per my understanding ......
    While Doing MIGO, Excise Tab appear at header level in Excise Tab and also at Item Level.
    But when u post part1  only, then Excise Entries also found there.
    But after posting Part1 in MIGO and Part2 in J1IEX,
    while going to back MIGO Document, Exicse Does not appear there becoz u post only part1 not part2.
    u can observe there entries like this
    During GR
                                        Material Stock            Dr.
                                        GR/IR clearing                        Cr.
      During Excise Invoice Credit           
                                        Cenvat Account          Dr.
                                        Cenvat Clearing                     Cr.
    Hope Clear U !
    Regards,
    Pardeep Malik

  • Education Cess and Sec Edu Cess not appearing in Excise Invoice

    Hi all
    i have a small issue and I am not very familiar with the CIN configuration.
    When I capture the excise invoice, only Basic Excise Duty is appearing in the invoice but Education Cess and Secondary Education Cess which is there in Sales Invoice is not getting captured.
    For example;
    If BED is 1000 Rupees; Edu Cess 20 Rupees and Sec Edu Cess 2 Rupees; only 1000 Rupees is getting captured in the Excise Invoice.
    Kindly let me know am I missing any G/L account settings.
    Thanks and Regards
    Adithya

    Thanks Prasanna/JP
    The mistake was from my side. I had not maintained condition records for these condition types.
         JEXT     IN A/R BED total     100.000      %         
         JECT     IN A/R Ecess TOT     100.000      %         
         JHET     IN A/R S&H eduCesTOT     100.000      %         
    The values are capturing now in excise invoice.
    Thanks and Regards
    Adithya

  • New Contact groups not appearing in iTunes

    I just got my iPhone 3G and attempted to set up syncing with iTunes (v7.7).
    I added a new group in Address Book, put some contacts in it, and then went to iTunes. I wanted to sync only certain groups from Address Book, so I turned that option on, but the new group I added does not appear in the list. I quit and restarted both Address Book and iTunes. I rebooted the iMac. I reinstalled iTunes. Nothing has worked.
    Any ideas?

    Indeed, following the instructions from this thread:
    http://discussions.apple.com/thread.jspa?threadID=1614078&tstart=60
    first led to iTunes finally clearing its cached information, but it still would not adop the new Contacts. They would only appear after following the instructions from the other thread mentioned above:
    http://www.ehmac.ca/mac-ipod-help-troubleshooting/64080-itunes-isnt-seeing-addre ss-book-contacts.html#post666662
    Thanks for posting these solutions.

Maybe you are looking for

  • Message:Row without tax was found

    Sir, When i try to make A/P Invoice for an interstate purchase against Form C, in that i give unit price inclusive of tax (i.e total amount including tax), so tax is not applicable for that ... so, i leave the tax code field blank,,and when i try to

  • Xserve setup trouble

    I'm trying to set up an Xserve at a high school in my town. Someone from a local college came to help, but he had never set up an Xserve before and we got stuck. We have already gone through the set up process (creating the account, attaching it to t

  • Select column in main query from sub query (derived table) -

    Hi: I have the following query - How do I select Tot_Atnd defined in the derived table SELECT  count(distinct c.prgm_id) AS "Total Completed", h.Tot_Atnd FROM  iplanrpt.vm_rpt_prgm  c INNER JOIN *(SELECT PRGM_ID, SUM(CASE WHEN ATTENDED_IND = 'Y' THEN

  • Need advice on second db on a 2-node RAC already has a db

    We are going to add a new db to a existing RAC 2 node environment. Currently we have one db on this two node rac ( each node has one instance). I want to be sure I follow oracle best practice on shared oracle home, shared listener, etc. Our environme

  • Download link for Acrobat 8 Professional

    I currently have Acrobat 8 Pro installed on my old Mac, and would now like to reinstall it on my new Mac.  I have been told that the product has not been tested on Yosemite, but I have been using it on that OS and so far it's worked the same way it a