Excise Invoice and RG Registers

Hi SD Guru's
My client is into Electrical installation services , I would like to know whether Excise invoices and the RG registers are need to be updated.
The nature of business of the company is procuring trading material from the vendors and do the installation, testing and commissioning and raise the invoice. so for some of the material which they procure have Excise Duty and where as the output taxes are VAT and CST only.
I would like to know whether I have to configure CIN details and what are the registers to be updated.
Thanking you all for your kind help.
Rgds

Dear Friend,
I am also with a client whose business is Electricial, Mechinical, Plumbing & Fire Fighting Installation services.
The business process is exact same as the process explaned to you.
Here we dont not update any Excise registers because we dont claim the Excise duty paid in Purchased goods.
The only Taxes applicable here are CST, VAT & Service Tax.
When we Purchase goods, the Excise Amount is shown seperately in PO Conditions but the value is updated in Material Cost. Only the Purchase / Sales taxes are posted in seperate GL accounts & VAT returned is claimed.
Thus in your case too I feel no Excise Registers updation is required.
Hope this helps...
Thanks,
Jignesh Mehta

Similar Messages

Difference in the excise invoice and Billing document value

HI Experts,
I am working in a Excise based CIN scenario.
I am Abaper and wanted to solve an issue.
basically, We are creating billing document and then creating an excise invoice. but there is a diff between the excise invoice and billing value.
Any input will really help thanks...

hi Lakshmipathi,
Sorry for the delay in replying.
This particular scenario happened to only some invoices which were generated in a day.
After that particular day, this didnt happen but would like to know why it has happened since we didnt want the same to happen again in future.
it is not the billing value. its it billing duty applied on the value.
Please help.

Accounting Entries of Outgoing Excise Invoice and Commercial Invoice

Hi All,
I am using SBO 2005 B. After adding Excise Invoice and Comm. Invoice. I am checking the A/c. effect from Comm. Invoice -> Accounting Tab. and click on the link. It is creating two entries. The Entry it opens is as below..
Account                               Debit                     Credit
C01735 -A D Enterprice        46500
221202 - CST Payable                                       911.76
412001 - Sales Treding Gujarat                         40000.00
510010 - Excise Duty                                        5587.75
420011 - Rounding Off                                            0.49
when i go to its previous entry, it shows me below entry...
Account                                   Debit                     Credit
221225 - Excise Duty Payable                             5425.00
Cess On Excise - Payable                                    162.75
510010 - Excise Duty               5587.75
I have doubt i have enter wrong accounts in G/L account determination. - > generatl - > CENVAT
Can any body explain me wht accounts i have to enter there.
Thanks and regards..
Chintesh Soni

Hi Chintesh Soni,
The A/c 510050 is a CENVAT Clearing A/c that is set in the G/L Account Determaination - General Tab - Outgoing CENVAT Clearing Account.
This a/c is a clearing a/c that is debited when Outgoing Excise Invoice is created and credited when Invoice is created.
Plese refer to the G/L posting of A/c 510050. You may find
1) A debit entry for Rs. 5587.75 which is posted because of the Outgoing Excise Invoice
2) A credit entry for Rs. 5587.75 which is posted because of the Invoice
Hope this clarifies your doubts.
Regards,
Sridharan T

BED Rate in Excise Invoice and ARE-3

Hello All,
I am having a problem in excise invoice and Creation of ARE-3.
The system is calculating the Excise components (BED/ECS/Higher Cess) but when i check the table J_1IEXCDTL, it is displaying the values but not the %age rates. The same problem is occuring when creating the ARE-3.
Shall be grateful for ideas that can help me solve this issue.
Regards
MJ

Hi Lakshmipathi,
The problem is resolved. I had not maintained the deafult condition types for excise for the %ages.
Thanks
MJ

Parent Excise invoice and part excise invoice

Dear All,
I am having following scenario:
Customer is manufacturer of industrial cranes.
It is not possible too send one crane in single vehical. And vehical is not pre-fix. Its decided at the time of delivery. so
at the time of despatch Customer wants to create one Parent Excise invoice(Original) which goes with first vehical and part excise invoice and xerox copy of parent excise invoice with other vehical. Parent excise invoice will have all the excise value details for complete despatch and in the part excise invoice will contain only basic value of parent excise invoice and no other conditions. and Both excise invoices should have local excise invoice number which is issued by excise authority.
Please let me know how to map this parent excise and part invoice concept.
Regards,
Sagar

Hi
The details given by you for scenario indicates that you are creating delivery for every partial despatch,and you also generate official excise invoice.
you can try for following solution
for Parent invoice you can go through the process as usual with J1IIN.
For partial excise invoice you can create excise invoice through T.code J1IS with reference of either Material Document (MATD) or creating and using proforma commercial invoiceas reference (OTHR) .
Through User exit available in J1IS( function group J1I7,) you can default things as per your logic such as series and excise groups .mainatianing duty values etc.
I hope this helps you.
Regards
Mandar

Export Excise Invoice and Commercial Invoice - URGENT

Hello All,
I am working on a scenario where excise duty is calculated for exports under claim for rebate i.e. no bond
In this case the duty is calculated as regular and claimed back from the excise authorities after submitting proof of export i.e. closure of export transaction.
However the challenge is that I am using a single pricing procedure for Domestic and export sale. There is no depot and hence no depot sale and stock transfer.
I am working on SAP 4.6C with CIN add-on 40A.
The problem I am facing is that If I create an excise invoice with reference to JEX (proforma) the duty is calculated correctly however when I am creating the commercial Invoice the excise duty from the excise invoice is flowing to the commercial invoice, that too the rupee value is coming as dollar.
If I create the excise invoice with reference to Commerical invoice then everything is fine. The excise duty gets calculated in rupees and the commercial invoice is in dollars.
May I request your views on how to configure this solution where I can create the commercial invoice after excise invoice and not let the rupee value of excise flow in?
Thanks for your help in advance.
Warm Regards
Manish

Hi,
You can make the appropriate setting in Customizing for Excise Duty, by choosing Basic Settings -> Maintain Excise Groups, and selecting Create EI (Create Excise Invoice Automatically)
Also maintain the default excise and series group in the configuration.
Logistics general>Tax on Goods Movement>India>Basic Settings>Maintain Excise groups. For your Excise group maintain the check Excise invoice during Billing.
After maintaining the same also maintain the default values in Logistics general>Tax on Goods Movement>India>Business transactions>Outgoing Excise invoices-->Maintain Default Excise groups and Series groups.
Regards,

Excise invoice and sale tax applicable in consignment process

Hi,
How excise invoice and sale tax applicable in consignment process in below stages--
in consignment fill up,consignment issue,Return andpickup
Regards
Ishikesh

Hi,
You have to pass JV for 50 picked up items through J1IS. For this you have to create new subtransaction type type and accordingly maintain the G/L in the tax on goods movement settings for acoount determination node.
Regards,
Sagar Wairagade

Rounding Issue Excise Invoice and Accounting document

Hi
I have made and Excise Invoice with following values
Base Price                          4110
BED    10%                           411
CESS   2%     on BED               8
HEC     1%      on BED              4
In the Excise Table J_1IEXCDTL also values for BED is updated as 411, CESS as 8 and HEC as 4
But in Accounting Documetn following values gets updated
Base Price                          4110
BED    10%                           411
CESS   2%     on BED               8.22
HEC     1%      on BED              4.11
So at times there is a difference in both Excise Invoice and Acocunting Document. We want same values should appear in Excise Invoice and Accounting Document. Since EXCISE does not accept value in paise, we need to round off the value to the nearest rupee and accordingly update the accounting document.
My Pricing procedure mentions Cal Type as 17 Rounder off as per T001 R for BED / CESS /HEC...
Please guide...
Regards
Sanjeev

Dear Sanjeev,
Check whether there is a Condition type DIFF in the pricing procedure, and also in the invoice (conditions)
Check whether there is any account key assigned to it, in the pricing procedure.
Thanks & Regards,
Hegal K Charles

Excise invoice and domestic invoice sharing same number range

Hi,gurus,my question is addresed to the sap cin gurus
Scenario:-- Normally sap has provided provisions that the domestic invoice and the excise for the export will have different number range object
Transaction-snum or snro(As per the rule the no range has to be approved by excise authorities)
Requirement:--The present requirement of the client is that as per their requirement they will be using the same excise number range both for domestic and the export(They have got the approval from the excise department as per the amendment,that specifies the same)
so i request you to pls guide me as how can it be done in sap that two different business process will share the same number range.
as per my knowledge local excise number range is-J_1IEXCLOC
and for exports is-J_1IEXCEXPand the both will use the same number range and,suppose 1 local invoice is created and say if the no is 1,then if the export excise invoice is created the number will be 2,pls guide me how is it possible that the same number range should be used.
Thanks in advance---Anshuman chakraborty

Dear sir,Thanks for attention towards the issue,but still i need to clarify some details-
the number range forJ_1IEXCLOC are already configured .It is not the case like i have to configure it for the first time however ,so the issue remains how shall i proceed in this case
Sir,i have already checked the transaction j1iin,it does not give any such box to check the-use local no range
infact the error message which the system was throwing to the user that-number range object not assigned for Object: J_1IEXCEXP.
The question remains from my side is what are the complete configuration steps I need to do ,to make the check box appear so as to select-use local number range,and is there any thing to be conveyed to my developer,so that the same appears,
or is it the case like the anything should earlier have been done before the number range for J_1IEXCLOC was created.i would request u to pls guide me giving the complete details of the step to be followed.
Thanks in advance
Anshuman chakraborty

Difference between factory excise invoice and Depot Excise Invoice

Hi
Is there any difference in invoice calculation part in excise invoice through Factory sales and excise invoice through depot sales?I know the processes but not sure about the excise calulation in these.

Hello,
From the point of view of Customer, there is no difference, because he can claim Excise Credit to the extent he has received in your Excise Invoice (factory or Depot).
From your point of view, as far as Excise Calculation is concerned, there is one basic difference. In Factory Sales you can create new Excise Liability (Say you have received Excise Credit from Vendor as Rs. 100 but you can pass Rs. 120 to Customer by paying the difference to Excise authorities).
While in Depot Sales you cannot create additional Excise liability & only pass the Excise Credit that you have received from source (Factory In this case).
Hope this helps,
Thanks,
Jignesh Mehta

Plant to Plant STO with excise invoice and taxes in one company code

Hi,
I have a new business requirement, we want to create only one company code and 12 plants in different states, each plant will have separate purchasing and sales activity this is ok this can be done with separate excise and series group as ther will not be any issue for purchsing and saling of materisl with exice in each plant , but how we can transfer the material plant to plant if the plant is in different states we want that the material should be transfer from palnt to plant with excise invoice only, as we have the company code common, how to create the billing document for this, and how to pass the duty from the saling plant and capture the same in the recieving plant. with proper tax entry. Can we do the STO with biiling if the two plants are in single compnay code.
regards,
zafar

hi,
I am trying to create a Stock Transport Order (STO) with document type UB and item category U. My objective is to transfer material from Plant (supplying plant) 100 to Plant (receiving plant) 1100 within one company code (1000) with STO.
For this purpose I created a raw material 1434 in plant 1000 with sales org 1 view and in that view entered in delivering plant field 1000 as delivery plant. After that I extended material 1434 to plant 1100 without changing anything what I did while creating the material first in Plant 1000 except in organizational level I entered 1100 in the plant field. I entered Sales org 1000 and distribution channel 10 in organization level for both plant while creating and extending the material. In me21n I chose Stock Transport Order with document type UB and item category as U also receiving Plant as 1100. With this when I tried to save the STO the message, I am getting an error, Cannot determine shipping data for the material 1434?
I am doing solely mm function why I need to create Customer master? In this case plant 1100 is the customer right?
Solution:
1. Mat.(1434) should be maintained in both the plants. (1000&1100).
2. Should have enough stock in supplying plant(1000).
3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
4. Make it receiving plant as a customer in customization.
    Create customer (xd01) & and define the shipping data for plants in both the plants.
    Path: spro u2013 img u2013 m.mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data (1 by1 )
    In Receiving plant (1100)                         In Supplying plant (1000)
    Customer num. 123345 (for ex.)              Customer num. -
(don't fill)
    Sales org.yyy
    Dist. Channel
    Sales div. y
5. Assign doc. Type is "NL" for intra company STO. If STO is inter company, Assign doc. Type is "NLCC".
    Position doc type is "UB"
    Enter supplying plant(1000) & doc type (NL) & checking rule (ex:01)
6. Assign doc. Type is "UB" to u'r plants.(PO)
    Go for new entries
    Enter supplying plant(1000) & Receiving plant (1100) & doc type (UB).
7. Create a PO, choose the doc type is `UB' & item cat.'U', Enter supplying plant as a vendor in PO of the receiving plant(1100).
8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
9. Sales people they will provide "out bound delivery num".
10. Do the GR. In GR the second tab 05 out bound delivery instead of PO mov.type 101.
11. See the stock over view in the receiving & supplying plants.
thanking you

BAPI to create Excise Invoice and Commercial Invoice

Hi All,
Can u tell me the BAPI for creating Excise and Commercial Invoice.
Moderator message: please do some research before asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Mar 2, 2011 5:56 PM

Hi,
You can make the appropriate setting in Customizing for Excise Duty, by choosing Basic Settings -> Maintain Excise Groups, and selecting Create EI (Create Excise Invoice Automatically)
Also maintain the default excise and series group in the configuration.
Logistics general>Tax on Goods Movement>India>Basic Settings>Maintain Excise groups. For your Excise group maintain the check Excise invoice during Billing.
After maintaining the same also maintain the default values in Logistics general>Tax on Goods Movement>India>Business transactions>Outgoing Excise invoices-->Maintain Default Excise groups and Series groups.
Regards,

One Tcode for excise invoice and Billing and Accounting doc no.

Hi Sap,
Is there any Tcode or Table to see the Sales Accounting Entries with the help of Excise Invoice number and Billing Document Number?
I mean I want a Tcode or table to see all Excise Invoice number , Billing document Nuber as well Accounting document number in one screen.
If any Tcode is there could you reply me,
Regards,

In VFX3 check if you have correctly filled up the selection screen.
Especially "Created By" fields which gets the default value of user who is running the t-code. If you have not created the billing doc then keep the field empty.
Also check in VF02 or VF03 if the billing doc exists.
Either thru VF02 or VFX3 you can release the billing doc to accounting.
There can be several reason for failure to post billing doc to accounting.
For ex,
1. FI posting period for the billing date is not open.
2. Some of the GL where posting should go are locked.
3. Account Assignment Group for the material is not maintained in material master.

Problem:Excise invoice and ARE-1

Hi Friends,
Please help me... thanks in advance...
Below are the details for Exports Scenario.
Customer 123 is from US.
Company ABC is in India.
In Sales Order,Pricing details
C.type Name   Amount    Currcy Per U    Cond.Value Currcy
PR00   Price    2,000.000 INR       1    PC    47.619        USD
JEXP   BED          12.000 %                         5.714        USD
JECP Ed.CESS     2.000 %                         0.114        USD
JA1X   Sec&Hr        1.000 %                         0.057        USD
In excise invoice,
BED(JEXP) -                 240.000
Ed.CESS(JECP) -             4.800
Sec&Hr Ed.CESS(JAIX) -   2.400
Doubt:1
On what basis it is calculating in Excise Invoice..
i am totally confused...
While Creating ARE-1
Header level:- In TotalDuties tab
Total BED: 2,400.00
Item level:- In DutyValues tab
BED           AED    NCCD    SED     ECS
240.000        -          -            -        4.800
Doubt:2
Here in header level it is showing as 2,400.000...
in Item level, i am unable to see the J1AX value(2.400).. but
In Excise Invoice it is showing in the field TAX1(2.400)..
what are the problems... i am unable to understand.
please help me..
with regards
Edited by: Azeez Mohammed on Sep 26, 2008 12:30 PM

Hi,
IMG setting -- Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Company Code Settings..
I have maintained as M in exchange rate type and Export Exchange ..
In OB08
Ex.R Valid from Indir,quot Ratiofrom from Dir.quot   Ratioto To
M      20.08.2008   1.00000    X   1   INR      =          X 1 USD
please guide me
with regards

Supplementary excise invoice and printout of this new excise invoice

hi
i have an issue when i transfer goods from my factory to depot plant.. based price for Excise duties calculation is let's say 100 INR/kg
market price increase and now.final customer is ready to pay 130 Inr/kg from my depot
i need legally to trigger supplementary excise invoice for the 30Inr/kg balance.
J1IH could help me..but it need to printout an supplementary excise invoice form (more or less on the same format than my initial excise invoice form).
J1IH will not allow me to raise this form ..... if i use a debit note...i can"t raise excise invoice as well thru J1IIN coz system do not allow me to create excise invoice without delivey reference.
So what to do....to have this supplementary excise invoice in the system in one hand and and a way to issue a new form for my 30INR/kg in the other hand ???
Thanks for your help
Best regards

For Depot Price increase scenario, J1IH should not be executed. Check this thread so that you will have an idea
[Re: Capturing of excise duty depots for the factory supplementery invoices|Re: Capturing of excise duty depots for the factory supplementery invoices;
G. Lakshmipathi

Excise Invoice and RG Registers

Similar Messages

Maybe you are looking for