Excise invoice Cancellation thru J1iex

Hi friends ,
I have done the J1iex capture , Migo  and J1iex Posting.
But Now I wanted to cancel this Excise invoice , the step I followed are
1) Cancel Migo
2) Re-Posted the Excise invoice thru J1iex ( Another Part-11 entry gets created)
3) Cancel excise invoice thru J1iex
BUT in j1i7 , system is still showing the Excise invoce as PART-1 and Part-11 posted.How I can see reverse entry in J1i7.
My query is , how my reverse entry will get updated in Excise register , part-1 &, part-11 excise tables
Regards
Shrey

Is it to require to cancel excise invoice thru J1ih ?
As far as i know , in order to cancel a incoming excise invoice , I have to
1) Cancel the MIGO ( this will reverse the Part 1 entry)
2) Re-post Excise invoice thru J1iex (same excise invoice number) - This will create another A/c document with reverse enteries and update PART - 11 enteries.
3) Cancel excise thru J1iex , this will cancel the captured excise invoice.
Therefore wondering in case I have to do J1IH also for this ??
My only problem is , reverse entry is not being appeared in J1i7 ...... is it the Standard SAP functionality ?
Regards
Shrey

Similar Messages

  • Error while creating excise invoice cancellation thru J1IS(J1IEX Invoice)

    Dear All,
    While creating cancel of purchase excise invoice with reference to J1IEX Internal Invoice No. system is throwing a error
    "Error updating table J_1IEXCHDR"
    Message no. 8I308
    Suggest me asap,.
    Thanks & Regards,
    Radhika

    Hi Radha,
    Check the ETT Table (Excise accounts assignment table) in the config have assigned the relevant gl accounts for TType - CEIV  Update all the gl accounts in the table.
    Verify the node--> Specify Excise Accounts per Excise Transaction --- debit and credit account names to the TType -- CEIV
    Credit -- CENVAT Suspence
    Cr         RG23 AT1
    Cr         RG23 BED,RG 23 ECS,
    Dr         CENVAT Clearing
    Dr         PLA BED, PLA AED, PLA SED
    Dr         RG23 AED, BED, SED
    Same should be assigned for Sub-Transaction Type '01' for CEIV Type.
    Thanks,
    padmaja

  • Change Excise Invoice no in J1iex Tcode

    Dear Sirs ,
                      I have done migo & capture excise invoice no date etc. Now i want to change excise invoice no through J1iex . is it possible. pls giv solution if any.
    Regards
    Abhishek Tiwari

    Cancel material document MIGO if stock not consumed,Cancel excise invoice thru J1IEX. Redo same process,enter correct excise invoice no.

  • Excise invoice posted in J1iex without PO

    Hi Guru's,
                  Excise invoice posted in J1iex without PO and not able to cancel it.
    Its says excise invoice 123 for 2008 has been posted to vendor Tooa.Please help me to solve the problem.
    Please tell other than JV with other adjustment and J1IS by creating.

    Hi,
    First you go GR document, in tht you can find the Excise invoice document number. Go to J1IEX select cancel/reverse enter the Excise Invoice number then save it. Based on you selection Excise invoice will be cancelled or reversed.
    In J1ID if you selected single GR, single credit for material you hve to cancel the excise invoice you can reverse it. If you selected single GR,multiple credits or Multiple GR, Multiple credits you can reverse the excise invoice.
    Hope its clear.
    reg
    Durga
    *assign points if the info useful

  • Country India Version Incoming Excise Invoice Cancellation

    Hi Experts,
    I am unable to cancel incoming excise invoice. I have gone through many threads regarding this subject but still none of the suggestion is working out here, please gives your valuable comments?
    We are using TAXINJ procedure and I followed the below steps for excise cancellation.
    1. Good Receipt for PO MB01
    2. Capture and Post Excise Invoice ref to GR J1IEX
    3. Cancel the Material document created in step1 MBST
    4. Cancel the Excise Invoice created in step 2 J1IEX.
    When I am trying to execute step 4 i am getting the error message Excise invoice EX140 2009 has already been posted for vendor 907970
    When I try to post the excise invoice EX 140 it gives me error No Part I exists for availing credit in excise invoice EX140 2009.I tried to update part1 using J1I5,there I only found the material document created in step 3.
    If I try to post the excise document with ref to the cancellation material doc and I use the same excise number i.e. EX140, it gives error Excise invoice EX140 2009 for the vendor 907970 Exists. I also tried with a dummy excise number EX141.i am able to capture excise with this number but when I try to post it gives me message No Part I exists for availing credit in excise invoice EX141 2009, Then I updated the part 1 using J1I5 and tried to post the document EX141, it gives a div by zero Dump.
    Please help me out.
    With Regards
    Sarvesh Kumar Vashist

    Hi,
    Thanks for your valuable inputs.
    I am still confused what standard SAP says regarding Incoming Excise Invoice cancellation, the comments are contradictory even I searched in other threads also but there also no standard answer.
    does it allow the cancellation if Part2 is posted?
    I followed the steps suggested by SAP Learner. But it does not allow me to do the step 3 it gives me messageu201D No Part I exists for availing credit in excise invoice XXXX 2009".I checked table J_1IPART1 and table J_1IPART2, the entries are there for excise invoice XXXX.
    Please advice As per Indian Tax law is it OK if I post the difference amount using J1IH other adjustment. But if we have to post the -ve difference then how can book that amount. I extracted the registers it is showing the JV values but does not show any reference document.
    With Regards
    Sarvesh Kumar Vashist

  • Control Excise invoice cancellation

    Hi All
    Our Business process is Proforma invoice -
    Excise invoice -
    Commercial invoice (Pass to accounting )
    Problem - After generating Commercial invoice system is allowing to cancel Excise invoice through J1IH or J1IIN with out checking commercial invoice ..
    We need the system to check Commercial invoice at the time of cancelling Excise invoice .
    Is there any user exit or Badi to control the Cancellation of Excise invoice if commercial invoice exists

    Dear Marathanda,
    CIN is not a statdard SAP offering, It has been built for India requirements and that is the reason why excise Invoice doesn't show up in the document flow..like SO, Del, Invoice..which gets updated in Table VBFA. and that is the reason why there is no check at Excise Invoice cancellation level that if commercial Invoice exists then cancellation should not be allowed.  there is one more factor for that, in many business scenarios we are creating Excise Invoice after the commercial Invoice and in many we are creating after delivery..say at the time of despatch of goods from factory premises or Stock Transfer Order so it's a tricky situation.
    In your case, the commercial invoice is getting generated after the Excise Invoice i.e.with Excise Invoice is getting generated with ref to the pro forma Invoice and then you want to restrict the cancellation of the Excise Invoice then first you need to check the Internal Number created at the time of Excise invoice, that number will give you the billing reference number (of pro forma Invoice). now from that billing document (pro forma Invoice) check in table VBFA , enter that precceding document number and and item number along with subseqent document number catagory as "M" It will give you the Commercial Invoice Number.  you can put your restriction there.
    Thanks,
    N

  • CIN Version - Excise Invoice Cancellation.

    Dear All,
    During billing document cancellation (by VF11) the excise invoice gets automatically cancelled. But my client doesn't want the automatic excise invoice cancellation. They wants to cancel the excise invoice only mannually (by J1IH).
    SAP Version is ECC 5.0
    Kindly let me know if you have any suggestions.
    Thanks & with best regards,
    S. Raju
    [email protected]

    Dear Raju,
      Please Check the bellow.
    SAP Note Number 551932 - Cancellation of Billing with Excise invoice
    Note Language: English Version: 2 Validity: Valid from 05.09.2002
    Summary
    Symptom
    When a billing document is cancelled, the attached excise invoice also gets
    reversed. Again the user can go and cancel the excise invoice independently
    through CIN making double accounting of the reversal.
    More Terms
    Excise invoice, Cancellation of excise invoice, j1iH, VF11
    Cause and Prerequisites
    This is because of the new cancellation procedure of the billing.
    This happens because the accounting document for Excise invoice posting is
    linked to the document flow of SD. So when you cancel the billing all the
    related accounting documents are reversed.
    Solution
    This is because of the new Billing cancellation procedure. You have to
    implement the userexit mentioned in note 339928. This will ensure that the
    cancellation of excise invoice works as it used to do before the new
    cancellation procedure.
    In the userexit userexit_fll_xkomk1 in function rv_accounting_document
    create add the code attached below. The userexit is in rv60bfza. This will
    not get overwritten in upgrades.
    FORM USEREXIT_FILL_XKOMK1.
    rule_new_cancel = 'A'.
    ENDFORM.
    This will ensure that excise invoice related accounting document is not
    reversed at the time of billing. You may use the existing functionality to
    cancel the excise invoice
    Header Data
    Release Status: Released for Customer
    Released on: 05.09.2002 07:35:33
    Priority: Correction with high priority
    Category: Consulting
    Main Component XX-CSC-IN-SD Sales and Distribution
    Additional Components:
    SD-BIL Billing
    Valid Releases
    20.04.2007 Page 2 of 2
    SAP Note Number 551932 - Cancellation of Billing with Excise invoice
    Software Component Release From
    Release
    To Release and Later
    SAP_APPL 46 46B 46B
    SAP_APPL 46C 46C 46C
    SAP_APPL 470 470 470
    CIN 3.0 30A 30A
    CIN 4.0 40A 40A
    Support Packages
    Support Packages Release Package Name
    SAP_APPL 500 SAPKH50015
    SAP_APPL 600 SAPKH60008
    Related Notes
    Number Short Text
    339928 New cancellation procedure cannot be deactivated
    Attributes
    Attribute Value
    weitere Komponenten SD-BIL
    Regards
    MBS

  • During Excise Invoice Cancellation Posting Date should be similar to excise

    Dear All Experts,
    Hope you are doing well !
    We have one requirement during  Excise Invoice cancellation for Posting Date Field. Generally, system is taking Posting Date as Current Date but we want system should take Posting date as (Posting Date of Excise Invoice).
    Please give your expert comments.
    With Best Regards,
    Bharat B

    Dear Bharat,
    Please use any exits given by me in the following thread and write the logic to populate the Excise invoice date as the cancellation date.
    Excise Invoice Cancellation on Date validation only
    Check and revert back.
    Thanks & Regards,
    Hegal K Charles

  • Excise invoice cancellation error

    dera gurus ,
    i had problem with excise invoice cancellation.
    the problem is
    outgoing excise invoice created by j1iin cancellation is giving error.
    actur error showing in system is "excise modvat not defined for ceiv transaction and excise group".
    please guide me what is short in customisation
    regards
    kris

    Go to SPRO-->Logistics General --> Tax on Goods Movements --> India --> Account Determination --> Specify G/L Accounts per Excise Transaction.
    Assign the appropriate GL accounts for the CEIV transaction and Excise Group Combination.
    Regards,
    Elanchezhian. K.C.

  • Excise Invoice Cancelation check

    Hi Expert,
    We have required check, without excise invoice cancel billing document not to be canceled.
    Please give the suggection how to configure.
    Regards
    BK GAIKWAD
    M9881908615

    Yes as already stated, this is not addressed in standard.  But in one of our plants, a similar requirement was made and I had controlled via MV50AFZ1 - FORM USEREXIT_READ_DOCUMENT.  Of course, this is to control cancelling excise invoice against proforma.
    You can also even try with J_1I7_USEREXIT_EXCISE_BEF_SAV to achieve this requirement.
    thanks
    G. Lakshmipathi

  • Excise Invoice cancellation in Intercompany STO

    Hi,
    We are creating the Intercompany STO from Depot to manufacturing plant.
    1)Creating the STO. Receiving plant is manufacturing plant
    2)Created the GI
    3) created the Outbound delivery
    4)Created the Outgoing excise invoice J1IJ from Depot.
    5) we are receiving the Goods at manufacturing plant with ref to Outbound delivery(materils is received at Quality Inspection first)
    6)Created the Excise Invoice "J1iex" Option "Capture excise Invoice" and "Without Purchase order"
    Sytem is created the partI and partII entries.
    Now we want to cancel the excise Invoice, How to do? we are trying to cancel but unable to do that?
    Regards
    Sapman man

    When you are returning the material, you get a material document.
    You create an Excise invoice by using J1IS transaction with reference to the material document.
    This excise invoice will come for monthly utilization
    regards
    prasad

  • Excise invoice cancellation

    I have transferred  100 pieces from manufacturing plant to depot via Stock transfer Order.
    Excise invoice of 100 pieces is made.
    Due to some reason ,depot returns back 20 pieces to plant.
    how should i cancel the excise invoice for 20 nos.
    Plz help me out.

    You cannot cancel excise invoice partially. Since this is return from depot please use the sales return process in the plant to take back the material.
    You can use J1IEX >EWPO (without purchase order) or J1Ih > additional excise, to take back the credit for the 20 units which are returned.
    J1IH is preferred because J1IEX looks for vendor.
    J1IW is an obsolete transaction but can be used if you are in 46B version.

  • Excise invoice cancelation scenarios

    Dear all
    Please explain the process and legal ways to cancel or reverse the excise invoice in sd. I want to know whether we can cancel depot excise invoice also..?
    Please explain..
    Thanks and regards
    Inder

    Hi,
    If utilization has not done you can cancell excise invoice
    if utilization has run for the invoice time period it might not be possible you have to
    do incoming excise invoice in j1iex screen
    for any assistance revert it
    regards
    bvdv

  • Excise Invoice Cancellation did not update RG23A Part-II Register ?

    Hi, Dear's
    I have cancelled Excise Invoice (T.Code J1IIN), system shows reversal accounting entry generated thru J1IH
    BUT did not update RG23A Part-II register
    Thanks
    SR

    HI
    As far as i know there is no part 1 or part 2 for RG1 register.
    regards
    Prashanth

  • Excise Invoice Cancellation on Date validation only

    Hi Experts,
    i am having critical requirement from Business, which is not available in SAP Standard, So i need help from you guys...
    Excise invoice can be cancelled on the same day of system/posting date. but when the system date and posting dates are not matching it should through error..
    Example  : i created Excise invoice on 17th june,2011 this is posting date of excise invoice, if i try to cancell on 17th june , it should allow.
                        but when i try to cancell the excise invoice on 18th june (system date) , it should not allow to cancell and it say Error !!!
    i heard there will be possible through User Exit  OR Function Module OR Routins ... Please help me
    Thanks and Regards
    Madhu

    Dear Madhusudhanan,
    Following are the list of User Exits available for J1IIN
    J_1I7_USEREXIT_EXCISE_BEF_SAVE User exit after the excise header and details are written and they can changed in J1IS  , J1IIN and Automatic creation of Excise Invoice.
    J_1I7_USEREXIT_EXINV_ADDL_DATA User exit for Excise Invoice Additional Data    in J1IS and J1IG                 
    J_1I7_USEREXIT_J1I5_MATFORM    User exit for J1I5 material form changes                           
    J_1I7_USEREXIT_J1I5_VALIDATE   User exit for subsequent J1I5 data validation                      
    J_1I7_USEREXIT_J1IEX_BEF_SAVE User exit for J1IEX before the data is saved                    
    J_1I7_USEREXIT_J1IEX_CHANGE    User exit for changing data before display             
    J_1I7_USEREXIT_J1IS_BASE_VALUE User exit to Change base value in J1IS                
    I strongly believe that the first exit will serve the purpose.
    Now if you are cancelling it using J1IH, Check the following thread.
    J1IH-User Exit
    Thanks & Regards,
    Hegal K Charles

Maybe you are looking for