Excise Invoice creation error -Billing document does not exists

Dear Experts,
I have created supplementary sales order, billing with refernece through sales order by VF01.
Now I want to create Excise Invoice but system gives error Billing Document does not exists
I have checked billing document in VBRK table & it is showing in table.
My item categroy is L2N -and set it to C
I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
Pl. guide me.
Thanks
Trupti

Resolved my problem.
Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
outbound delivery.
So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
Thanks to all.
Trupti.

Similar Messages

Billing document does not exist in VF22

Dear Experts,
   We are working on Invoice list it gives output with LR00.
but we have created a new output type ZPGR and assigned in
    SD>Billing>Billing document>Invoice List>Maintain Output for Invoice list
     Prgram-RLB_INVOICE and smart form ZS_INVOICE_PACK_2_GRP
and VF21 i was able club billing documents. but in VF22 while issuing output it give error 'Billing document does not exist'
checked and found because VBTYP in VBRK for invoice list document(LR) it is 3. but RLB_INVOICE program checking values MNOPSU56.
any idea how to deal with, is there any other program instead of RLB_INVOICE to assign smart form
Please suggest
Regards
Siva

Hi Sunkesula,
below is the sample Z print program.
i copy some of the code from RLB_INVOICE and change the sapscript calling method to smartform calling method.
REPORT Z_TEST.
INCLUDE XXXX. "you may define any include you want
INCLUDE XXXX. ""you may define any include you want
*       FORM ENTRY
FORM entry USING return_code us_screen.
DATA: lf_retcode TYPE sy-subrc.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen
                     CHANGING lf_retcode.
IF lf_retcode NE 0.
    return_code = 1.
ELSE.
    return_code = 0.
ENDIF.
ENDFORM.                    "ENTRY
*       FORM PROCESSING                                               *
FORM processing USING proc_screen
                CHANGING cf_retcode.
DATA: lf_formname           TYPE tdsfname,
            lf_fm_name            TYPE rs38l_fnam.
* SmartForm from customizing table TNAPR
lf_formname = tnapr-sform.
* determine smartform function module for invoice
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname           = lf_formname
*       variant            = ' '
*       direct_call        = ' '
      IMPORTING
        fm_name            = lf_fm_name
      EXCEPTIONS
        no_form            = 1
        no_function_module = 2
        OTHERS             = 3.
    IF sy-subrc <> 0.
*   error handling
      cf_retcode = sy-subrc.
      PERFORM protocol_update.
    ENDIF.
ENDIF.
"call the fm of the smartform. You may pass in any data you would like to display here
CALL FUNCTION lf_fm_name
ENDFORM. " processing

PO Print Preview Error 06019 "Document does not exist"

Hi people , i`ve the following issue. I`ve noticed that when creating a PO if the user clicks con the "Print Preview" BEFORE Holding or Saving the document , the system will give the following error msg :
Document does not exist
Message no. 06019
And then the system will hang , you won`t be able to go back and the whole PO is lost . Does anyone knows how to solve this ? thanks a lot for any help .

Issue already discussed in this link Re: Unable to Save RFQ and PO.

PO creation error - FBGENDAT parameter does not exist

Hi SRM experts
I'm trying to verify the error that occurs when the automatic creation of a PO. I know you must enable the parameter FBGENDAT on my R3. However, this parameter does not exist on my R3. What should I do?
The R3 version is 4.6 C. This functionality exists in this version?
Thanks
Thiago Vassoler

i think this SAP note describes this process
539978 - Automatic generation of BAPI test data directory.
Muthu

Document does not exist (Message 06 619) in creation of PO

Hi All
Can any one help on this below issue:
The error is 'Document does not exist' on each item that was on that RFQ to wrong vendor.
That is because I sent them out on an RFQ with different vendor.
Now I wish to process and save the PO to correct vendor.
How do I get rid of those errors that do not allow me to save PO?
Thanks
Sada

issue resolved

Error at the time of J1IFQ(Sub Contracting) "The Document does not exist."

Dear All
At time of Quantity Reconciliation for Sub-Contracting Challan (J1IFQ) i am getting the error " The Document does not exist."
But 103 & 105 already made without any error.
Please help me out.
Chandrashekhar

Hi,
Could you please let us know process which you are following for it ?
I hope it goes like this.
- Create PO
- Transfer posting goods to subcontractor
- Create sub contracting challan
- Receipt of goods
- Quantity re concilliation
- Closing the challan
If it is with the above process..it should work..
Thanks and Regards
Deepak Gupta

'Purchasing document does not exist' error while testing Inbound PO Idoc

Hi experts,
i am working on Inbound PO Idoc scenario. I am testing Idoc in WE19 with ORDRSP mesage type.
Idoc type:ORDERS05
Process code:ORDR
FM:IDOC_INPUT_ORDRSP
while trying to create PO it is giving an error 'Purchasing document does not exist' in we05.
please suggest me how to resolve this???
Regards,
Bhuvan.

Hi,
first time i am testing this IDoc and i don't find any field in Idoc structure to provide purchase order value.
any more inputs plz??
regards,
bhuvan.

Shopping cart Document does not exist error while PO creation

Hi Friends,
We are in SRM 5.0 Extended Classic and ECC6.0. I am experiening a issue while sourcing. After shopping cart is created and ends up in sourcing cockpit, I try to create PO, I get the error 'Shopping cart Document does not exist'. I verified Number ranges, org structure, and config settings but unable to find a solution.
This is at a critical stage where I am not able to create PO and hence process is not complete. I am not able to proceed further and need advise on how or where to look for possible issues. I did look at the other SDN postings but was not pertaining to mine.
Thanks
Rao

hI
Did you get below error message **** pit.
Data not found
Document does not exist
i believe the error message will not stop you to do sourcing.
select and assigned to work area and assign source of supply and create a Purchase order.
i also faced this error long back.
br
Muhtu

Error "Account assignment 00 for purchase document does not exist " when u

Hai,
I am encountering the following problem when posting a PO based Invoice using BAPI_INCOMINGINVOICE_CREATE.
The error says " account assignment 00 for purchasing document does not exist".
The scenario is very simple. I need to raise an Invoice against a PO. the PO has a single line item of quantity 10 net price 10. Tax code is U2 ( 7% tax).
I am passing the following at header level.
Invoice_indicator ( as 'X'),company code,doc date , posting date, gross amount (107, currency USD, calc tax indicator as 'X'.
At line item i am passing Invoice document item 000001, po number , po item number, tax code(U2) item amount (100),
Does this error has got any thing to relate configuration matters?
Regards,
Upender

Hi Upender,
In some cases, depending on the type of PO / Posting,
you might have to populate the accounting data itab and pass in the BAPI parameter.
you can select the accounting data from EKKN for the PO.
Again it depends on the PO category, wether you need to populate Qty & Unit in accounting data.
Further, the accounting data should be exactly the same as there in EKKN ( all the fields except Qty & Unit ).
Thanks,
Ram

Billing document does not capturing basic amt. capture only duty part

Hi
while doing billing on customer
the billing document does not capturing the basic amt on , it only capture only duty part.
pl suggest , how resolve the prob.
Regard
R.Sharma

HI,
Check the pricing procedure, in that remove the statistic for the pricing condition then try,
i think will resolve the issue, pricing should not activate the statistic
Thanks & Regards
Rajasekhar

"Document does not exist" exception when updating a Purchase Order, Agentry

Hello Gurus,
I updated a PO in SAP by calling the Bapi. It displays the error:
com.syclo.sap.mm.steplet.POUpdateSteplet::throwExceptionToClient::1513::POUpdateSteplet - Document does not exist |
I checked on SAP and found the PO there. And in the log file, the PONumber, Company code are sent to the server. Then why It throws the above exception.
I spent a day but cannot find out what happen to the PO. Please help me. Thank you very much.
Edit: Even though I hard coded the PO Number, it still display the error.
JCO.Structure header = _imports.getStructure("IS_POHEADER");
String poNumber = user.getString("transaction.PONumber");
setValue(header, log, "PO_NUMBER", poNumber);
String companyCode = user.getString("transaction.CompanyCode");
setValue(header, log, "COMP_CODE", companyCode);
String purchaseOrg = user.getString("transaction.PurchaseOrganization");
JCO.Structure headerX = _imports.getStructure("IS_POHEADERX");
setValue(headerX, log, "PO_NUMBER", poNumber);
setValue(headerX, log, "COMP_CODE", "X");

Jason,
I checked the SAP error log and found the issue in the log. I am not sure if it is the cause of "Document doesnt exists. Please help me figure it out. Thank you very much.

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

Report painter execution error - KH014 "Report does not exist".

Hi All,
I customized one report in FSI3 and used SE43 to create a t code for this report. In the development system, report will be executable from this t code.
Transport requests are successfully transported from development to production without any error. But on production when I tried to execute the report, I am getting the error KH014 - "Report does not exist".
While checking in production I found that the report was missing from report tree in FSI3 and as a result the customized report cannot be executed. As per basis guys there was not a issue in request transportation.
Has anyone encountered similar problem? How was it resolved?
Thanks.
Prashant

Hi Mikko,
Thanks for your reply but your solution is not working.
Hi Stacy,
I can execute the report from t codes like FSI3 & FSI0 in development.
I used SE43 for t code creation. At the time of t code creation there is a option called "Drilldown" under Report type heading, In drilldown option I selected my report from report type 002 (Financial Statement Key Figure) and created the t code. After this I transported both the request to production server.
Please let me know if this is wrong method or there is any other option to transport this report in Production.
Thanks & Regards,
Prashant

BAPI_PO_CREATE1 document does not exist

Hi All,
I'm creating P/O using BAPI_PO_CREATE1.
But, below messgae returned and not created P/O.
Type    Message
E     Document   does not exist
E     No instance of object type PurchaseOrder has been created. External reference:
W     "Latest acceptable GR" date exceeded by a schedule line
W     Effective price is XXXXXX USD, material price is XXXXXXX USD
W     Can delivery date be met?
W     Can delivery date be met? (Realistic delivery date: 2010.08.02)
W     "Latest acceptable GR" date exceeded by a schedule line

Hi SUNGJIN LEE
Kindly check the dates provided form ur side and the functional config for the scheduled line and for creating the PO form it .
Error would come if u have not provided the data as per your configuration ..
Regards
Swapnil

Error: Selected disk does not exist (21) Module-SRE-700

Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin
Keyfile Size 202814577 over limit 32768 will not burn into flash
ServicesEngine boot-loader> verify
Loading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
Unrecognized command
ServicesEngine boot-loader>
#service-module sm 1/0 session
Trying 172.20.245.1, 2067 ... Open
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Trying to reset Service Module SM1/0.
May 7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
þ
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
ú
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...

Hi,
Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
1. uninstall existing SRE-V software
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
2. run sm-hw-util to set sata mode to IDE
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
ip route 255.255.255.255 SM slot/0
4. install WAAS:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438

Excise Invoice creation error -Billing document does not exists

Similar Messages

Maybe you are looking for