Excise Invoice document showing in process

Hi,
I have created excise invoice docs. in J1IIN but when i check status of document then it is showing as IN process...
doc. process flow showing one billing account doc is cleared and excise account doc is not cleared.
plse suggest..
Edited by: KHAPREVIPIN on Nov 4, 2011 7:13 AM

Hi,
Can anybody tell me how we can make it doc. completed.

Similar Messages

  • Change mode of the excise invoice is showing zero excise values

    H ifriends,
    The change mode of the excise invoice is showing zero excise values.....and the same is reflected in the ARE1
    While creating the excise invoice,its showing BEd/Ed and Shed and after saving,if i check the doc the values are shown aero...
    Thanks
    Sasi

    s

  • How to attach documents in Delivery & in Invoice document of SD processing?

    Dear Sirs,
    Hi,
    Can you please suggest me how to attach documents in Delivery & in Invoice document of SD processing?
    I could do so in inquiry, quotation, sales order but not able to locate the path in Delivery and in Invoice.
    Pl suggest.
    regards,
    rajni,

    hi ,
    GO to SU3 own parameters then add SD_SWU_ACTIVE and X.
    Then in VA02,VL02 (edit mode) You can attach the document to respective orders.
    If the intermediate Coupling required then 2nd method for this is
    CV01N Create the document and attach document to Document no and line NO.
    Regards,
    Sam

  • Can we print multiple excise invoice documents with one click?

    Hello,
    SAP has provided with t-code 'J1IP' for printing excise invoice documents. But for printing multiple documents we need to click print button each time for every new document. is there any other way by which you can print bulk excise documents without clicking print button each time?
    Thanks in advance.
    Neha

    Hi Neha,
    It is possible on SAPB1.
    Try to Use the Document Printing Window on Financials or Marketing or Banking Module..
    Try this,
    ->> Financials.
    -> Choose Document Printing.
    ->> Open the Document Printing Window.
    ->> Select the Document Type - Incoming (or) Outgoing Excise Invoice.
    for example, IF you Select the Document Type - Incoming Excise Invoice.
    ->> Select the require Series.
    -> your requirement wise, put the tick mark of Open Only or &Only Documents Still to Be Printed.
    ->> put the Posting Date From Date & To Date.
    ->> Assign the No. of Copies - 1 or Your wishes.
    ->> Click the OK button, than will Open the Print Incoming Excise Invoice Window.
    ->> Choose all Incoming Excise Document (select all row).
    ->> Click the Print button.
    Regards,
    Madhan.

  • Excise invoice number showing display option in J1IEX change mode.

    Hi CIN Experts,
    We are using E.C.C6.0.
    In Excise transaction T.code: J1IEX Change option, Official Excise invoice number (J_1IEXHEAD-EXNUM) showing the display mode. How can change the Official Excise Document Number is display mode to change mode in T.code: J1IEX change option.
    In 4.7E system showing the change option in T.code: J1IEX change mode.
    Regards,
    Hanuman

    We cannot change this field from display to change. Once the excise invoice is captured the excise invoice number is freezed.
    It is SAP Standard & to break this you would need the access key from SAP.
    If the change in excise invoice number is by user mistake, please cancel the excise invocie and capture the new one.
    Thanks & regards
    Hameed Parvez

  • Billing document and Excise invoice document number should be same

    Dear SD gurus
    kindly help me following client requirement
    in order to cash (domestic & Exports)
    and sto (intra and Inter plant to plant) scenarios the billing document number and excise invoices number should trigger  same number
    Example order- delivery- pgi- commercial invoice (VF01) --- billing document no.1234 here it should create automatically excise invoice no 1234
    in J1iin disply it show ref document no( billing document no: 1234.    & excise invoice no 1234

    Dear All,
    As per the standard it is not possible. But some times client says why two different numbers ranges we require same numbers ranges for both billing doc. & Excise invoice.
    Please go through the following link
    http://saptechsolutions.com/pdf/SDDocumentNumberRangeEnhancements.pdf
    Also check with the Abaper with explicit enhancement by maintaining the number range values in Custom table where we go when ever there is no option for(if client is not convincing) but which is not reccomandable but left out with no choice when client is demanding.
    Regards,
    S.Himavanth.

  • Mrp per unit filed in excise invoice not showing value

    Hi,
    in excise invoice print  mrp per unit value not showing, to find solution what process i need to follow
    please find attachment for screen shot.
    regards,
    sivakoti.

    Hi all
    i got solution from my issue , as above given MRP per unit value picking from MRP per case value,
    here if MRP per unit value is more than 3 digits(ex: 1000 rs/-) then value not appearing in excise invoice ,for this my ABAP r has done program variant changes for numeric length increased for MRP per unit field
    thank you to   G Lakshmipathi and Ashok Kumar Telugu for spending your valuable time on this issue .

  • Delivery number archived but cancellation of invoice document shows open still..

    Hi All,
    i have a scenario here where delivery number got archived but invoice number got cancelled and it is in open status.
    I want to delete that particular cancelled invoice in the system.
    How can i do it? Pls suggest..
    Thanks,
    Pavan.

    Hi Santosh,
    The issue is with user in Production system.I dnt have access for VF02 in P system.
    But still,my doubt is we cannot delete the billing document right??
    Thanks,
    Pavan.

  • Reverse the material document before cancelling the excise invoice.

    Dear Experts,
    While cancelling the exice invoice thru J1iex , system is giving me an error message "Reverse the material document before cancelling the excise invoice" .......I checked PO history where all the material documents are already cancelled with MIGO cancellation (movement 106 )
    But in J1iex , if I select the cancel option and put this invoice number , it is showing me one document with status "IN PROCESS" and if I select that doc and try to save it. System prompted me the message "Reverse the material document before cancelling the excise invoice ,but if I am trying to post this document system is issuing me a message "All Part I entries have been canceled for excise invoice ...........xx.Exicse table J_1IGRXREF and J_1IPART1 alrady update with both documents.kindly any one suggest me positive.
    MINI

    Hello
    follow the below steps
    1. MIGO:Cancel the material document (movement type 102) & during cancellation update part1 only. This changes the excise invoice document status to In process
    2. J1IEX:Post the excise invoice referring the material document (of movement type 102). Creates an accounting document to reverse the CENVAT postings. Creates a corresponding entry in Part II of the appropriate excise register
    Thus the excise postings are reversed.
    3.J1IEX: Cancel the excise invoice (Do this if your plant does not allow multiple goods receipts per excise invoice).Now the system will allow you to cancel the vendor excise invoice
    above the procedure right. you will get this updation excise registers also
    Laxman

  • Status of excise invoice is IN PROCESS after all the process is over.

    Dear All,
    We have done the migo and the Capture the excise invoice also,But still the status of the excise invoice is showing as IN Process.What could be the reason,
    Please give the inputs.
    Thanks in advance.
    deepti

    Hi,
    Check the table entries for the excise invoice. First check the Part II entry correctly made in J_1IPART2 table. And also check the status of the Excise Invoice in tables J_1IEXCDTL, J_1IEXCHDR, J_1IGRXREF is posted or not (P).
    If there status P is missing after Part II posting you have to make it as 'P'.
    Regards,
    Sandeep

  • CIN - Link between Excise invoice No (created in MIRO) with Material Document (GR)

    Dear Experts,
                 I have done Miro for excise duty (CIN) of Import Purchase order and then posted the material document in MIGO_GR referencing PO, i have entered the Excise invoice No (created in  MIRO ) in the commercial excise invoice no tab,while processing MIGO. Need the link between the tables containing invoice and Goods receipt for report development.
    Thanks & Regards
    Thangavel ganesh

    The commercial invoice number in MIGO just pulls the excise data from the MIRO. It does not get stored in any of the material document tables.
    For reporting you will need to go through PO history tables: EKBZ

  • Create Excise invoice(J1IIN) document while creating billing document using bapi BAPI_BILLINGDOC_CREATEMULTIPLE

    Dear Experts,
    My scenario is:
    We have batch split scenario, where the parent line item of billing document has 0 quantity and its subsequent item (item with batch number) holds actual quantity data.
    When we create billing document using VF01 against delivery document, system creates billing document along with excise invoice document (J1IIN Document). And in excise document contain same number of line items that of billing document. Please see the below attachment: 
    Biiling document screen shot:
    While creating billing document, the J1IIN Document created automatically. Below is the screen-shot for the same.
    Now the issue is:
    When we create billing document using BAPI: BAPI_BILLINGDOC_CREATEMULTIPLE system creating only billing document and not creating excise invoice document.
    When we create excise document manually using J1IIN the zero quantity line items are excluded in excise invoice document.
    Please see the below screen-shot for the same; The z quantity line items are missing.
    We want excise document to be created while creating billing document using BAPI BAPI_BILLINGDOC_CREATEMULTIPLE. Or is there any other BAPI for the same purpose.
    Customization is also maintained for creating excise invoice document automatically.
    Regards,
    Rajesh Sadula.

    HI
      Pricing will be carried basing on the pricing
    procedure.
    Case1: Prices will be carried out automatically if
    necessary condition records are maintained for the
    condition type.
      For this you can go to Sales Order-> Item Conditions
    In the screen you can click on command button Analysis,
    which gives you the list of condition types associated
    to the pricing procedure. By clicking on the condition
    type you can know the action that has taken place.
    Case2: Manually forcing prices for Items.
      To do this, you have to populate ORDER_CONDITIONS_IN &
    ORDER_CONDITIONS_INX. Also note to identify the item
    numbers, you manually pass the item number for each item
    in the sales order, use the same item number for
    populating conditions.
      Parameters required:
    ORDER_CONDITIONS_IN:
      ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
    ORDER_CONDITIONS_INX:
      ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
       Hope the above info helps you. Do revert back if you
    need more info.
    Kind Regards
    Eswar

  • Unable to create Accounting document for my Outgoing excise Invoice

    Dear All,
    I am implementing sales from Factory. I am unable to creat accounting document for my Outgoing excise invoice.  When I click the Utilization button, The excise invoice type is selected Deemed.
    1. How to control which Which Excise invoice type should be selected in J1IIN.
    2. For Deemed exports will system not genererate Accounting document for Excise Invoice?
    3. Where to view the excise invoice document types (Like Billing and order types)
    Thanks & Regards

    For deemed export sales,
    -Accounting documents will not get generated. (ref: Excise Acct Determination in CIN settings, you will not find Excise Tranraction type:ARE3 for which G/L account will not be assigned)
    -Excise Invoice type will be automatically triggered based on configuration : Excise Group / Series Group detetermination.
    - For Deemed Exports , only Quantity will get updated in RG1, but not the value. thats the reason, accounting document will not get generated.
    - This excise invoice is created, for - to update the RG1 registry / ARE3 creation.
    hope it clears
    regards,

  • Document type for outgoing Excise invoice

    Dear Expert,
    I would like to maintain different document type for Excise document generated at the time of J1IIN transaction. At present system generating document type SA. So we need to maintain different number range for these documents instead of SA document number.
    I have maintained document type ED in Tax on goods movement - Basic Settings - Maintain company code settings, but still system taking document type SA.
    Please advice.
    Thanks,
    Krishna Kumar

    Hi,
    for outgoing excise invoice document type setting as above mentioned same path
    Hi
    pls maintain document type below mentioned path
    Tax on Goods Movements
                   India
                             Basic Settings
                                       Maintain Company Code Settings
    whatever marked UTL FI DOC type for excise outgoing excise invoice
    in that your maintain company code against ED document type
    Thanking you
    Regards
    Mahesh

  • Excise invoice controlling Document???

    Hi Gurus,
    what is the transaction code or menupath for controlling of excise invoice document...?
    can we define some other transaction code forexcise invoice instead of J1IIN or J1IS or J1IJ ???
    How is it posssible?
    Thanks in Advance...
    Ravi kumar

    hi lakshmi pathi,,
    controlling means...
    when we are creating the commercial invoice the controlling doucment is F2, VOFA- it goes to billing document type, F2 is a billing type like wise for excise invoice anything is there???
    RAVI

Maybe you are looking for