Excise invoice issue for non stock orders
Hi,
We are unable to create excise invoice for non stock materials. When we try to create excise invoice with refernce to the billing document, the following error appears (message no 81681: reference document of 2917 is not delivery document). This process was working properly before updating patches, but after the updation, we are not able to generate excise invoice for non stock materials. (FYI: In the case of non stock order we are using order related billing). Any solution to resolve this error??
regards
John
Edited by: Gino12 on Oct 28, 2010 10:00 AM
For sales with material type NLAG, Item category TAX and schedule line category CX contain the standard settings along with copy control settings (VTFL, item level requirement 004) that suit your case.
Similar Messages
-
Capture Excise Invoice w.r.t Stock Transfer Order
Hi all,
Can anyone explain me how to Capture Excise Invoice W.r.t Stock Transfer Orders.
right Now i'm follwing below Steps
1. Create STO in Issuing (sending ) plant with duty and CVD conditions.
2. Issue Material to Receiving PLant using 351 Movement.
3. Book the CVD Condition thru MIRO Transaction
4. Capturing Excise Invoice w.r.t Stock Transfer Order.
5. Receive the material in Plant( 101 Mvmt).
I had Few Query at step 3 and 4.
Q1. While capturing Excise Invoice w.rt STO system is not taking CVD number as reference in Commercial Invoice Field.
Q2. It gave me the Msg Like Excise Invoice XXX does not Exist in PLant B2B ( B2B is my sending Plant).
does that mean i have to first create the excise invoice in sending plant?
if yes, how can i create pls provide step for this.
this excise invoice need to be created in reference to STO or In refernce to 351 mvmt document.
Regards,
Sheo Anand SinghHi Anand,
Commercial Invoice number is the invoice number u have created in your Step-3, not the CVD number.
Hope this clarifies.
Thanks,
Viswanath -
Create auotmatic purchase order for non stock materials
Hi,
Please provide me information on how to create automtaic purchase order for non stock materials in MM system.
RegardsHi,
For automatic PO creation follow the steps.
1) Material Master purchasing view tick automatic PO check box (Material type NLAG)
2) Vendor Master purchasing view tick automatic PO check box.
3) Maintain Source list for Vendor & Material.
4) Maintain Purchase Info Record.
5) Create a Purchase Requisition.
6) Use T.Code: ME59N & execute for PR for vendor, you will be able to create automatic PO.
Note
Ensure that Purchase Info Record should be there.
If you have more than one vendor then fixes only one vendor in source list.
During PR creation select source determination check box.
SAM -
Excise invoice creation for Debit Memo or Credit Memo
Dear All,
I have to create Excise Invoice J1IIN with reference to Debit Memo in Differential Invoice Senario.
When i goto J1IIN it shows Customization for Document is missing in table Billing Reference type.
How to create Excise invoice for Order related billing.Plz solve my problem.
Award Pts for useful answers.
Thx & Regards,
PankajCIN Configuration for Excise Invoices in case of RETURNs
Basically CIN is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Maintenance screen, which you can MasterExcise Rate access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure ofData ScreenMaterial Master Configuring the Material master Screen Sequence.for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
Transaction
Action
J1I2
Prepare a sales tax register
J1I3
Create outgoing excise invoices in batches
J1I5
Update the RG 1 and Part I registers
J1IEX
Incoming Excise Invoices (central transaction)
J1IEX_C
Capture an incoming excise invoice (excise clerk)
J1IEX_P
Post an incoming excise invoice (excise supervisor)
J1IF01
Create a subcontracting challan
J1IF11
Change a subcontracting challan
J1IF12
Display a subcontracting challan
J1IF13
Complete, reverse, or recredit a subcontracting challan
J1IFQ
Reconcile quantities for subcontracting challans
J1IFR
List subcontracting challans
J1IH
Make a CENVAT adjustment posting
J1IIN
Create an outgoing excise invoice
J1IJ
Assign excise invoices to a delivery for sales from depots
J1INJV
Adjust withholding tax Item
J1INREP
Reprint a withholding tax certificate for a vendor
J1IQ
Year-End Income Tax Depreciation Report
J1IR
Download register data
J1IS
Process an excise invoice (outgoing) for other movements
J1IU
Process exemption forms
J1IW
Verify and post an incoming excise invoice
J1IX
Create an incoming excise invoice (without reference to purchase order)
J2I8
Transfer excise duty to CENVAT account
J2IU
Remit excise duty fortnightly
J2I9
Monthly CENVAT return
J1IG
Excise invoice entry at depot
J1IGA
Create additional excise entry at depot
J2I5
Extract data for excise registers
J2I6
Print excise registers
rewards if it helps -
Subcontract PO/PR does not generate PR for non stock component
Hello,
I need help on above topic.
SAP Version is ERP Central Component 5.0.
My problem is that PR is not being generated for non stock component in PR/PO of higher/parent material.
I notice that in component overview screen the item cat for this non stk comp. has changed to T( text item) even though the BOm has been maintained with item cat as N( non stock). The material type being used for non stk material is custom developed(copy of NLAG).
Has anyone faced similar issue. or can suggest some missing customization (if any)
Just to confirm :
I have done customising for Direct procurement in OPPQ to trigger PR in requirements planning. Also tried with prod order creation option(though my case is PO creation)
Any help from forum is highly appreciated.
Thanks,
RamHi ,
Commitement check is taking place due to availability control. If u dont want to carry out AVAC for PR then in Tolerance limit put the exclude the check for PR.
SPRO > PS > Budget > define tolerence limit > here u might selected ++ i.e. for all activity type. U select indidula transaction grp excluding PR.
Rgds -
GR/IR CLEARING ACCOUNT FOR NON STOCK CONSUMPTION ITEMS
SAP EXPERTS,
Following the scenario..
1.PO raised for non stock consumption item for acct asigned to say a cost center/order
2.The G/L account on the consumption is OK
3.When I post GR for the PO Item (non stock consumption ), system is autoposting default the GR/IR Services G/L account ie the same G/L account (GR/IR Services ) that is posted when a SES is approved for the Services PO
3.Pl. note the Item category I have used is Std.(blank) for the PO raised for non stock consumption item .
My concern:
1.Is this system default behaviuor??
2.i e system will auto post at the time of GR , to the same G/L account (GR/IR Services) for both the consumption item (non stock item procured for cost center/order..via material PO .). and the services PO (for services procured via Services Item category 'D').???
Pl. help suggest.Matter most urgent!!
Thanks,
Ranganath KrishnaHi,
Please check up if there is any default value at the plant level;in case of such default,the system will post to the GL Account defaulted,not with standing the "standard item category".Better checkup if any cost center /order has been assigned.
The GL item is defaulted thro'the item category.If both the goods and services have been defaulted to the same GL Account,then not with standing the type [ie] whether goods or services,the system will post tot he same GL Acct.
Hope this helps.
Regards.
Ramesh -
Error in excise invoice creation for differncial price invoice
Dear all,
When i am going to create outgoing excise invoice for differncial price invoice
i am having the error - "Reference document of 10006893 is not delivery document
Message no. 8I681"
Can somebody give me solution where to make settings in configration or else.
ArchanaKindly refer following SAP Note
Note 1251126 - Excise Invoice created for Billing document wrt Sales order
Symptom as suggested by the above SAP Note is:
In the scenario where billing document is created with reference to the Sales order, the reference document for billing document is not delivery and it is possible to create multiple billing documents wrt the same Sales Order.
In such a case, the excise invoice should not be allowed to be created with respect to such a billing document through the transaction J1IIN.
However, current the system is allowing excise invoice to be created wrt the first billing document for the sales order and then for the subsequent billing documents, the following error message is displayed - Modvat utilization done message no 8I 446. This is incorrect.
This note contains the corrections for not allowing the creation of the excise invoice for these billing documents.
Hope it assist your cause.
Thanks & Regards
JP -
MIGO Print label WEE1 for non stock items from GR for PO
Hi,
I added logic to print new label into printing program MZ07DETI which is printing labels for stock items. My label is for non stock items. The problem is that for non stock items printing process is not triggered. I created PO with Account Assign. Category F, P or K no material number and no storage location. For this type of PO no print possible during GR posting. Is any set up available in IMG to make it work. I appreciate any response.Hi,
Please check up if there is any default value at the plant level;in case of such default,the system will post to the GL Account defaulted,not with standing the "standard item category".Better checkup if any cost center /order has been assigned.
The GL item is defaulted thro'the item category.If both the goods and services have been defaulted to the same GL Account,then not with standing the type [ie] whether goods or services,the system will post tot he same GL Acct.
Hope this helps.
Regards.
Ramesh -
Automatic PR to PO conversion for non stock material
Hi,
Can Automatic PR to PO conversion be done for non stock material (with account assignment category and no material master).
We are presently doing only for stock material with transaction ME59N.
Thanks and Regards,
PratapSome of the pre-requisites for automatic generation of PO from PR are
1. The system selects only those requisitions for automatic PO generation for which the indicator Automatic purchase order has been set for both the material and the vendor.
2. It can only generate purchase orders from requisitions to which a unique source of supply has already been assigned.
So material master is mandatory if you want to create PO automatically from PR and you need to activate this option both at vendor and material master. -
Automatic PR for non-stock BOM component for Subcontract PO
Dear Guru,
Can you any master please advice me on below question?
We have a subcontract PO with the BOM component of non-stock, can i know if there is possible for those non-stock BOM component to generate a Purchase Requisition automatically, any existing configuration that we can do?
Thank you very much,
Regards
Chee WeeHi,
You can use Material Type "NLAG" for Non-stock materials.
Non stock materials cannot be stored, right, hence the name non-stock.
Non-stock material includes materials that are not managed on an inventory basis (for example, small parts such as nails) though physically in stock.
You can create a BOM which contains an NLAG item or directly use in Production order also.
item Category "N" So system will create the purchase requisition when there is requirement.
We receive the non stock material using movement type 101. upon receiving the material will be consumed.
Please refer link below for better understanding.
BOM explosion in MRP for non-stock material
What is use of Item Category N(non-stock item) in BOM creation
Believe this could help your queries. TQ
rgds,
nanthakumar -
Inspection lot for Non stock relavant without material master
Hi,
Could you suggest how to carry out the isncpection processing of an Non-Stock material without Material Master?
Our porcess is:
1. Create a Purchse Order
2.GR of Purchse Order. & directly consumtion to cost center.
Now my doubt is that how can we maintain the QM paarmeters for Non stock material without Material Master Record.?
Thanks,
AmarAmar,
Your requirement is not logical, If you say it is non-stock, once GR is done it would directly get consumed. QI to my knowledge not possible.
Regards,
Prasobh -
Hi ,
For non stock items (which do not have material code ) , what price we will put in PR ?
In live scenario, suppose a requestor from HR dept is raising a PR for non stock material.
Suppose the material is procuring for first time in that company .
He doesnt know the price for that .
So what price he will put in the PR?
Please tell me in live scenarios , what people used o do ?
regards,Hello Sandeep,
While creating purchase requisition, normally user dept will put the approximate price for that material/service. sometime user will put even price as 0.01 (currency) also in PR and purchasing dept will put the negotiated price at the time of Purchase order creation.
Hope this helps.
Regards,
Arif Mansuri
Reward if answer is helpful. -
Restrict Goods Issue for Reserved Stock
Hi Experts,
My requirement is to restrict goods issue of stock qty which is reserved.
For that i have created checking rule and assigned to MIGO_GI because we need to consider only reservation .
Now when i create manual reservation system gives msg as per config.
e.g current unristricted stock is 100 qty
manual reservation created for 10 qty
System gives msg if i issue material more than 90 qty. It is working properly
Now pb is system is not considering reservation created by process order confimation.
I already assing checking rule with Checking grp for availability check and also set properties.
in include dependant reservation i set - x - Include all reservations.
I need to restrict goods issue for reserved stock for reservation created by process order.
Thanks in Advance
JanakHi Janak,
When a reservation is created automatically or manual, it will depicts the requirement of the material for the specific department/process. BUt it doesnot restrict or label the material as reserved. This is because the acutal requirement/consumption may vary from the reserved quantity. Also the stock still remains in the un-restricted stock and hence its open to be issued.
Now if you want restrict the stock for automatic reservation, then you can make an enhancement wherein the stock is moved to required stock type. But this will block the stock for the order even if it is not required.
Regards -
Delivery date for Non stock items
Hi,
While creating Maintenance order for Non stock items in component screen planned delivery time fld comes. Here
I put 10 days. But system creates PR with delivery date as today's date ie order creation date.
Actually delivery date should be 20.09.2009.
Waiting for your valuable inputs.
Thanks
PrasadHi,
The requisition delivery date is dependent on the operation start date. System does not consider the planned delivery time when calculating this delivery date.
The delivery date is based on the following calculations:
- The start date of the operation
- Minus Goods receipt processing time of the component
- Plus or Minus Lead time offset for the component in the order
The above values can be adjusted to manipulate delivery date.
As mentioned, It is also possible to influence this date by implementing exit COZF0002.
-Paul -
BOM explosion in MRP for non-stock material
Dear friends,
I have a non-stock(bom item category 'N') service material setup as a component in my production BOM, which during MRP run, should create a Planned order or Purchase requisition for that non-stock component. But, when I run MRP for the top-level material, it doesn't create any requirement for that service material, while all other stock material(Bom item category L), it generated dependant requirements.
Appreciate your help.
Thanks
SuriDear Suri,,
Please go through this.
<b><u>Non-Stock Items</u></b> Use this item category if you want to enter a
material that is not kept in stock before use, and that is only procured for a
specific planned order or production order.
The material is only rarely required for a custom-made product and is used
directly in the product as a purchased part.
<u><b>Before you start</b></u>
You can enter a non-stock item either with or without a material master. If you
enter a non-stock item without a material master, you must enter a description.
For non-stock items, you have to maintain purchasing data in the bill of material.
You enter the following materials as non-stock items because the quantities are
not updated in the material master record:
o Materials with a material type that supports configuration
o Pipeline materials, which can be taken from a pipeline at any time
<u><b>
Special functions</b></u>
The following functions are supported for non-stock items
You maintain purchasing data for non-stock items in the bill of material.
In the planning run, the system generates purchase requisitions
instead of dependent requirements for components that are procured directly.
When you configure your R/3 System for MRP, you can define whether direct
procurement is triggered by the planning run or by production order management.
Product costing processes take valuation data from the BOM item.
The system determines the release strategy on the basis of the price data you
enter. The material group is required to produce a purchase requisition.
Regards
Mangal
Maybe you are looking for
-
Visual Studio 2013 does not rebuild all code resulting in old code deployed through wsp
I recently converted my SharePoint 2010 project from Visual Studio 2010 to Visual Studio 2013. I have the Premium version with Update 1. I quickly noticed that 2013 has bugs. For instance I could get a build error out of nowhere while developing, sta
-
IHC: Central Payments - Posting two side entry
Dear SAP Gurus, I have been IHC module and when doing the scenario 'Central Paymentsu2019, the payment order creates two payment items one for Ordering Co. Code (subsidiary) Current Account and one to the IHC Current Account (Clearing Partner). As pe
-
I do have the new OS X Lion, but the product didn't work on the snow leapard either. The product manual says it's compatible with mac, but when i install everything, it's still does not work!?! Please help Thanks Matt
-
Photoshop Elements 10 has stopped working...
I have installed this program on my PC 4 times now and even downloaded the trial version and then put in my serial number on it but every time I try and Edit a picture it starts trying to load up the pic and then crashes and says Photoshop has stoppe
-
Compaq mini cq10 130 sf bios password help
Can you help me please with forgotten Bios password,its giving me this error code : CNU9496HJZ Thanks alot