Excise Invoice number in MB_MIGO_BADI
Hello masters...
I am working on badi MB_MIGO_BADI.
Whenever line item in MIGO is marked as 'OK' and Enter is pressed,
Excise Invoice tab gets appeared.
I wan to crosscheck if this invoice number is assigned by user or not with respect to Tax Code in PO item...
I debugged and checked almost all internal tables in MB_MIGO_BADI, but was unable to find Excise Invoice number and Excise Invoice date..
Please help...
Best Regards
Yogi
Dear keshu,
Thanks for your reply..
I could not find Excise Invoice data at header in both of the BADIs you suggested.
Your further suggestions will be appreciated...
Best Regards
Yogi
Similar Messages
-
Excise Invoice number and Internal Number
Hello Friends
I have some queries ,I will be thankful to you if you could guide me, in understanding themu2026
1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice number
2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
3) When do we require updating of register ,is it done on daily bases, and how can we see the entries of RG23A part 1.
4) We have excise invoice number range of posted ,in process and cancel documents which is assigned to GRPO transaction type, while running J1I7 though we select last option part 1 posted and part 2 not posted, still the system shows the cancelled documents, How can I avoid the cancel documents
Thanks
Siddharth1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice number
-->> Ex inv nbr will be entered based on the vendor ex invoice .. this is external nbr assignment
2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
--->> there is no relation between grpo vs. ex inv nbr
3) When do we require updating of register ,is it done on daily bases, and how can we see the entries of RG23A part 1.
>> u can see in J1I7 or thru table J_1IPART1
4) We have excise invoice number range of posted ,in process and cancel documents which is assigned to GRPO transaction type, while running J1I7 though we select last option part 1 posted and part 2 not posted, still the system shows the cancelled documents, How can I avoid the cancel documents
>> wait for others answers.. -
Depot Excise Invoice number skipped ???
Hi Everyone
For Ex. say our depot excise invoice number range is from 1to 100, assuming the current number is 51. Some day back there was a jump in the depot excise invoice number range. In between 1 and 51 the number "25" is missing.
So the excise department has asked the company as to why we have skipped the number 25.
I have checked the table J_1IRG23D, but the skipped excise invoice number is not appearing in the tables, I mean it says "No table entries found for the specified key"
Our Company wants to know the exact reason as to why the system has skipped the depot excise invoice number "25".
Whether it is the system mistake or user mistake or some body else fiddling with the system.
Please offer you valuable suggestions to solve this problem
Thanks & regards
satishHi,
SAP 99.9 % will never skip the number range on its own.
As per my understanding:
1.Some one has manually deleted the Depot Excise Invoice number after creation (due to the user mistake at selecting the
appropriate Incoming Excise invoice, Price , material or etc reason. And while creating the New Depot excise Invoice Number
he forget to adjust the number range at object 'J_1IDEPINV' for corresponding Series Group. This u can confirm by checking
the entry at Item level, instead of Header at it will not show that entry.
2.May be due to the Depot Sales Returns for respective Depot Invoice canceled and Deleted by the user.
Here, deleting the excise Invoice is not Valid practice as per Excise Tax rules of GOI.
3. Kindly check, whether Number Range Changes happend for respective Series Group between the Fiscal Year 2010-11.
Please feel free to correct me and It will be a value addition if you find any other solution.
Thank You,
RB -
Hi Sap Guru
Can u elobarate explanation regardind this. I need Can i get the Excise invoice number or Bill Number in FBL5N open item report without development. If yes/No, Can u guide me how to resolve this.
Its Urgent,
Thx in Advance
NehaHi,
In Change Layout --> Hidden Fields: Billing Document.
Best reagrds,
Amit.
Note: Also, Column: Document No (Sort it by Type: BL) -
Excise Invoice number not dispaly in ledger (FBL5N)
Dear Experts,
Generally Excise Invoice number display in customer Customer Ledger (FBL5N) IN Reference key 3 field. But In some cases it is not display. Please share possibility.
Regards
BK GAIKWADHallo Sir,
Please ignore my Previous replay,
Actually when invoice is released for accounting entry (VF01) 90% of Invoice number have been display in FBL5N Ref. key 3, but only 10% invoice number not display with same customer / Excise group / series group. some issues.
I am unable to address it. please help
Regards
BK GAIKWAD -
Excise Invoice number not display in case auto generate
Dear Experts,
we have use auto excise invoice generation functionality, it is working properly, but only Excise Invoice number not display after saving billing document. what to do for display the same after saving billing document.
Regards
BK GAIKWADThank you Lakshmipathiji,
My question is when we have create excise invoice through J1IIN excise invoice number has been display in bottom line after saving billing document.
But in case we have creating auto generate Excise invoice, Excise Invoice number not display in same screen. How to do to display excise invoice after saving billing document.(Excise invoice generating in background but number not display in same screen)
We have changeover manual to auto generate excise invoice system.
Regards
BK GAIKWAD -
Manual Excise Invoice Number- J1IIN
Hi Experts,
My client require manual excise invoice number for local as well as export invoices in J1IIN.
kindly advice how to do this.
Thanks in advance
Regards,
PrashantHi
I did not understand what did you mean by '' system is running 2 months back''.
You can always start a number range from the number you want. Did I understand correctly that you need to prepare all the back dated invoices now and bring the system upto the mark as on today with physical status of your invoices.
Regards
Yatin Thakkar -
Export Excise invoice number in continuation with domestic
Dear Friends
Excise invoice number for export should be in continuation with domestic i.e if my last domestic excise number is 0000000050 & if i do the export excise transaction the system should pick up 0000000051
vipinDo not maintain Numbers for the Object: J_1IEXCEXP; only maintain for J_1IEXCLOC
When you go into J1IIN, you will need to mark the checkbox: Use Local Number. If at the first time (in the case of Deemed and Regular Exports), you do not see this checkbox, click on the 'Calculator' icon and hit the 'Back' icon. Mark the checkbox and save your Excise Invoice. This number will be a continuation of your Domestic Excise Invoice.
thanks
G. Lakshmipathi -
Excise Invoice number aginat sales order
Hi,
Is there any report available in SAP where as we can be excise invoices raised against particular sales order or scheduling agreement
Rgds,
Saurabhhi
To get the Sales order number from excise invoice you have to use the below table
Pass the EXNUM (official excise invoice number) into table J_1IEXCDTL and get RDOC2(billing doc number)
Now pass this RDOC2 to into table VBRP-VBELN and fetch the data for VBRP-AUBEL (sales order No)
regards
Edited by: PRASHANTHgoud on Mar 19, 2010 1:24 AM -
Excise invoice number range.
Dear Sirs,
For a new trading business I have assigned a new number range for commercial invoices but I am unable to create a new number range for Excise Invoices.
Please suggest how I can create a new Excise number range for this particular business & how I can interlink it with the commercial invoices.
Looking forward for your kind support.
best regards,
RajdeepHi
As Ratish alraedy mentioned that Excise Invoice No. Range is maintained on the basis of Series Group, so check your series Group.
T-Code : SNRO
Following is the No. Range Objects related to Excise, select the proper no. range object as per your requirement.
J_1I57FC - 57FC Number Range
J_1IARE1 - ARE1 Doc No object based on Series Group
J_1IARE3 - ARE3 Doc No object based on Series Group
J_1IBOND - Excise Bonding: Bond number object
J_1ICERT - Withholding Tax Certificates (India)
J_1ICHLNNO - Internal number range for challans
J_1ICONPLA - Consolidated PLA serial no. generation
J_1IDEPINV - Excise Invoice Number for Depot Invoices
J_1IEXCEXP - Export excise invoice number range
J_1IEXCINV - Excise invoice number
J_1IEXCLOC - Local excise invoice numebr range
J_1IEXCTST - Excise invoice with intervals
J_1IEXINEX - Excise invoice number for export
J_1IINTNUM - Internally document number to be generated
J_1IINTPR2 - Despatch serial number
J_1ILIC - Excise Bonding: License number object
J_1IPLA2 - PLA part II number range object
J_1IRG1 - RG1 Number range object
J_1IRG1_T - No. Range for RG1 - Excise group / Material
J_1IRG23A1 - RG23A part 1 no. range object
J_1IRG23A2 - RG23A part II number range object
J_1IRG23C1 - RG23C part I number range object
J_1IRG23C2 - RG23C part II number range object
J_1IRG23D - Folio Numbers for RG 23D
Regards
Amitesh Anand -
Excise Invoice number range not being picked by crystal reports
Hi all,
We have a Crystal Report that generates the Invoice document based on the invoice number which is an input a parameter. The report is built on 'SAP Table,Cluster or Function' type connection. The Invoice numbers are updated into the source system. Current invoice series is *****0001,.....****0052,****0053,****0054.............****0100......****0111,****0112,*****0113.
The problem is that the Crystal Report is working fine till ******0111 but it is returning a blank values for Invoice numbers ******0112 and others following. We checked the data in the SAP system and the details for Invoice Numbers ******0112 and others are available in the SAP system.
While i select the Excise Invoice number field of the corresponding table and clicking on browse data it is showing invoices upto ******0052.
Please help.
Thanks and Regards,
Raja.NHi
is this data coming from a single table or are joins involved ?
did you try a report simple on a single table to see if the data would be returned ?
ingo -
Excise invoice number range wants to be same for domestic & export & Deemed
Hi Gurus,
My Client wants one excise number range for all sales transactions,
including domestic & export & deemed export,
I tried to manitain only one number ranges in Local number range object only to utilise
that check box of local number range in excise invoice screen,
but still it is not allowing us to do so ,
I tried to maintain number range for export serious group in local number range object only but still it is not allowing me to do further proceed for ARE-1 with refernce of that excise invoice number ,
please give me solution for this issue ,
we are in very bad situation our Go-Live is stuck due to this issue from 1 week,
Regards,
SaiDo not maintain Numbers for the Object: J_1IEXCEXP; only maintain for J_1IEXCLOC
When you go into J1IIN, you will need to mark the checkbox: Use Local Number. If at the first time (in the case of Deemed and Regular Exports), you do not see this checkbox, click on the 'Calculator' icon and hit the 'Back' icon. Mark the checkbox and save your Excise Invoice. This number will be a continuation of your Domestic Excise Invoice.
thanks
G. Lakshmipathi -
Excise invoice number showing display option in J1IEX change mode.
Hi CIN Experts,
We are using E.C.C6.0.
In Excise transaction T.code: J1IEX Change option, Official Excise invoice number (J_1IEXHEAD-EXNUM) showing the display mode. How can change the Official Excise Document Number is display mode to change mode in T.code: J1IEX change option.
In 4.7E system showing the change option in T.code: J1IEX change mode.
Regards,
HanumanWe cannot change this field from display to change. Once the excise invoice is captured the excise invoice number is freezed.
It is SAP Standard & to break this you would need the access key from SAP.
If the change in excise invoice number is by user mistake, please cancel the excise invocie and capture the new one.
Thanks & regards
Hameed Parvez -
Excise Invoice Number column in T code FAGLL03
Hi All,
In the standard SAP Report (T code FAGLL03) G/L Account Line Item Display,client wants Excise Invoice Number column.
We have brought the Billing Document Number for G/L account reconcilation.
Please help me out for the above.
Regards,
Hemant PatilHi Alpesh,
Thanks for your reply.
I will try the same.
Regards,
Hemant Patil -
Excise Invoice Number in FBL5N
Dear All,
In FBL5N only Billing Document number will come. But there is no provision for Excise Invoice number. Same way at the time payment receipt from customer there is no provision for Excise Invoice number in the layout. But Customer will make the payment against the Excise Invoice Number.
Is there any Setting or User Exit which will automatically copies the Excise Invoice Number in Reference Field of Billing (Accounting) Document. So that it will be shown at the time of FBL5N or Customer Payment.
If you some solution it will be helpful for me.
Regards
Sreenivascheck in config:
The special field has to exist in table T021S. Check if this is the case by using the following path:
Transaction SPRO -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Customer Accounts -> Line Items -> Display Line Items -> Define Additional Fields for Line Item Display.
check Note 215798 - FBL*N: Special fields are not displayed
Few other notes..207436, and 300550.
Maybe you are looking for
-
Hello, I have an USB-6009 DAQmx device. I would like to measure analogue input with the possible highest sampling rate (48kHz) . At the same time, I need to ramp a voltage analogue output from 0 to 5 Volts, lets say during 2 minutes. These two tasks
-
Updating data from a text file in DW is it possible ?
Hello, I would like to know if there is a way to update info that I originally input into DW from a .txt file using the insert tabular data command. If anyone know if this is possible, I'd really appreciate knowing this. I don't mean via means of usi
-
I just bought a MacBook Pro. I have Word 2008 on a DVD which I used for my old Mac. How do I download it on the new MacBook since it has no DVD drive?
-
I have two scanners (Canon Canoscan 3200 F, Lexmark X1190) connected to a PowerMac G4 (Mac OS X 10.4.11) via Firewire (the Canon) and USB (the Lexmark). In Image Capture I set up to share both the scanners. They appear on my MacBook Pro which is conn
-
Replacement for FM ADDRESS_COM_FAX
Hi All, can any one please let me know if there is any replacement for FM ADDRESS_COM_FAX... thanks Ravi