Excise invoice posted and paid but stock is yet to removed from Warehouse

Dear All,
Please provide solution for given below issue,
1.Invoicing was done in 09.09.2009 and excise invoice has also been posted and paid to Govt. but the material is still lying
at our works as consignee was not having valid road permit.
2.Now the consignee has been changed but sold to party is same and the road permit is also available
3.Excise duty revised to 10.30% from 8.24% and the new price breakup has been provided by the customer as per new
duties/tax rates.
Please suggest the best way to handel this issue.
Regards
AJIT K SINGH

>
AJIT K SINGH wrote:
> Dear All,
>
> Please provide solution for given below issue,
>
> 1.Invoicing was done in 09.09.2009 and excise invoice has also been posted and paid to Govt. but the material is still lying
> at our works as consignee was not having valid road permit.
> 2.Now the consignee has been changed but sold to party is same and the road permit is also available
> 3.Excise duty revised to 10.30% from 8.24% and the new price breakup has been provided by the customer as per new
> duties/tax rates.
>
> Please suggest the best way to handel this issue.
>
> Regards
> AJIT K SINGH
Take help of excise or tax consultant,based on their advice you can proceed further.
Either you have to revere all postings from excise to sales order.
Maintain new pricing in condition record.
Complete sales cycle including sales invoice with new price.
Create excise invoice.
For excise duty payment seek help of excise or tax consultant

Similar Messages

Excise Invoice posted as Capital goods, but material is a raw material

All SAP Gurus,
J1ID data wrongly uploaded as Consumable instead of Raw material.
Due to this excise invoices for these materials got captured and posted in RG23C register in place of RG23A register.
(Material document can not be reversed as material is already consumed.)
How these entries in RG23C/RG23A entries can be corrected?
Regards,
rajan

Hi,
Use following functions to adjust the duties in RG23A and RG23C;
Go to J1IH - Excise JV
Use following method to reduce duties from RG23C Accounts
Making Adjustment Postings for Other Transactions
Use: - You follow this procedure if you want to make an adjustment posting that does not fall into any of the other categories of adjustment offered by this function. You can only use an external document as your reference document.
Procedure: -
1. J1IH > Excise JV > Other adj.
2. Enter data as required, including:
u2022 Document number
Enter the number of the external document that you want to refer to.
u2022 CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. Here in your case select RG23C.
3. Click on u201CEnteru201D button.
The system displays the information from the material document.
4. Adjust the posting date as necessary and enter Vendor code as per requirement.
5. Enter the amount of excise duty in either of the following ways:
u2022 To enter line items for different materials and the excise duty accordingly, choose u201CDetailsu201D button and enter the line items in the table.
Here fill details like Material Code, Quantity as per Excise Invoice, Batch No, Reference (i.e. GRN Document), BED and Ed Cess Amount manually.
If you want system to propose the BED and Ed Cess Amount, Click on u201CGet Excise Invoiceu201D button and select the proper Excise Invoice from which the proportionate amount is to be copied.
Select the u201CExcise Invoiceu201D and click on u201CContinueu201D button.
It will copy BED and Ed Cess and SECess amount as per the quantity mentioned here. It will be proposed in proportion of selected Excise Invoice quantity and value.
u2022 To enter the excise duty only, choose u201CHeaderu201D button and enter the excise duty in the totals fields at the foot of the screen.
6. Specify which G/L accounts are to be posted to.
7. Save the adjustment posting.
System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.
Use following method to take duty credit in RG23A Accounts
Making Adjustment Postings for Additional Excise Paid by Vendors
Use: - You follow this procedure if a vendor has increased the amount of excise duty that it originally charged you and you want to debit the difference to your CENVAT account.
Procedure: -
1. J1IH > Excise JV > Additional excise.
2. Enter data as required.
In the Document number field, enter then number of the document sent to you by the vendor.
u2022 CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. Here in your case select RG23A.
3. Click on u201CEnteru201D button.
4. Adjust the posting date as necessary and Enter Vendor Name.
5. Enter the amount of excise duty in either of the following ways:
u2022 To enter line items for different materials and the excise duty accordingly, choose u201CDetailsu201D button and enter the line items in the table.
Here Enter Material code, quantity as per excise invoice, reference document (i.e. GRN Document), batch no., BED and Ed Cess Amount to be posted.
u2022 To enter the excise duty only, choose u201CHeaderu201D button and enter the excise duty in the totals fields at the foot of the screen.
6. If the duty qualifies as countervailing duty (CVD):
a. Select CVD applicable.
b. Enter the CVD amount in the BED amount field.
7. Specify which G/L accounts are to be posted to.
8. Save the adjustment posting.
System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.

Excise Invoice number and Internal Number

Hello Friends
I have some queries ,I will be thankful to you if you could guide me, in understanding themu2026
1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice number
2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
3) When do we require updating of register ,is it done on daily bases, and how can we see the entries of RG23A part 1.
4) We have excise invoice number range of posted ,in process and cancel documents which is assigned to GRPO transaction type, while running J1I7 though we select last option part 1 posted and part 2 not posted, still the system shows the cancelled documents, How can I avoid the cancel documents
Thanks
Siddharth

1) When we see the document in J1IEX ,in excise invoice tab, we see two fields :Excise invoice number and Internal Number.
For Internal number we define the range in object J_1INTNUM, but how do we define range for Excise invoice number
-->> Ex inv nbr will be entered based on the vendor ex invoice .. this is external nbr assignment
2) Where do we maintain the relation between GRPO (Excise Transaction type) with the Excise Invoice number
--->> there is no relation between grpo vs. ex inv nbr
3) When do we require updating of register ,is it done on daily bases, and how can we see the entries of RG23A part 1.
>> u can see in J1I7 or thru table J_1IPART1
4) We have excise invoice number range of posted ,in process and cancel documents which is assigned to GRPO transaction type, while running J1I7 though we select last option part 1 posted and part 2 not posted, still the system shows the cancelled documents, How can I avoid the cancel documents
>> wait for others answers..

Error in excise invoice posting

Hi,
I've done all related excise setting for a manufacturing Plant, but at the time of Excise posting (J1IIN)
this red error is coming "BED : Debit = 2,624.00 Credit = 0.00 Diff = 2,624.00"
Message no. 8I312
and after clicking on uilization button amount of Secess is not displaying.
can anyone plz tell me what further setting is required for excise invoice posting.
Thanx.
SP Shukla.

Hi
For SeCess : please ensure that you have maintained SECESS condition type under excise defaults
for both A/R AT1 and AT1 Percentage field.
Regarding the other error please check if you have enough balance maintained in all the register by clicking on BALANCE screen..
Also please let me know whether values system is displaying is of BED or ECS or Secess
Regards
MBS

Excise invoice posted in J1iex without PO

Hi Guru's,
Excise invoice posted in J1iex without PO and not able to cancel it.
Its says excise invoice 123 for 2008 has been posted to vendor Tooa.Please help me to solve the problem.
Please tell other than JV with other adjustment and J1IS by creating.

Hi,
First you go GR document, in tht you can find the Excise invoice document number. Go to J1IEX select cancel/reverse enter the Excise Invoice number then save it. Based on you selection Excise invoice will be cancelled or reversed.
In J1ID if you selected single GR, single credit for material you hve to cancel the excise invoice you can reverse it. If you selected single GR,multiple credits or Multiple GR, Multiple credits you can reverse the excise invoice.
Hope its clear.
reg
Durga
*assign points if the info useful

Input Excise SHECess not showing in MIGO & Excise Invoice posting, where I made a mistake ?

Input Excise SHECess not showing in MIGO & Excise Invoice posting, where I made a mistake ?
1.At the Time of MIGO,In Excise Invoice tab SECess Hide in reight side of the Screen
2. At the time of J1IEX, Complete Input Excise SECess Line item is not appere in screen
Please give the solution
Regards
Maran

Hi,
Please check following :
1. Whether the AT1 indicator is active for Excise Registration number under CIN customizing
Path
IMG --> Logistics - General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Registrations
2. Whether the AT1 condition is maintained in Maintain Excise Defaults against tax procedure
Path
IMG --> Logistics - General --> Tax on Goods Movements --> India --> Basic Settings --> Determination of Excise Duty --> Maintain Excise Defaults
3. Whether the AT1 condition is maintained in Specify Excise Accounts per Excise Transaction against excise transaction type
Path
IMG --> Logistics - General --> Tax on Goods Movements --> India --> Account Determination --> Specify Excise Accounts per Excise Transaction
4. Whether the AT1 G/L account is maintained in Specify G/L Accounts per Excise Transaction
Path
IMG --> Logistics - General --> Tax on Goods Movements --> India --> Account Determination --> Specify G/L Accounts per Excise Transaction
5. Check whether in condition for AT1 is maintained in FV11.
6. Check whether AT1 setoff percentage is maintained (this is applicable only in case you maintain setoff conditions).
7. Check whether AT1 percentage is maintained in conditions tab of Purchase Order.
8. Check whether tax code is maintained in FV11 for AT1 condition maintained.
Please check and revert in case of any clarifications.
Regards,
Tejas

How To validate Excise Invoice Posting date(J1iin) equals to Billing Date

Hi Experts
I have required to validate Excise invoice Posting Date(J1iin) should be equal to Biiling date . Can anyone suggest me which user exit i will use for it.
Waiting 4 reply.
Regards
Prateek

using FM J_1I7_USEREXIT_EXCISE_BEF_SAVE

GR Based Invoice Verification and Invoice Post and Block Process

Hi,
We currently use invoice "Post and Block" process for AP invoice processing. GR Based Invoice Verification is not set in the vendor master for this purpose to allow us to enter an invoice where "No Goods Receipt" has been raised. However, when we raise a PO using material groups the flag "GR Based Invoice Verification" is activated in the PO. We subsquently have to remove this indicator in the PO in order to register the invoice. Why is this setting populated in the PO when it is not activated in the vendor master ? Is there a setting in MM for material groups that ius populating this value in the PO where a PO is raised using material groups ?
Thanks

Hello Eilish,
With regards to Goods reciept indicator, firstly the system looks
for any reference documents like purchase order or contract and takes
the flag from there.
If no reference documents or contracts are referenced, then
the system looks for an info.record to take the flag from there.
If there is not a info record then system will carry out the
GR-BasedIV indicator from the vendor master.
Hope this helps,
Ray

Need to be able to setup printing for my Ipad2. How do I find the instructions. THe printer is installed and capable, but I do not see it from either my iPad2 OR iphone 4. Please advise.

need to be able to setup printing for my Ipad2. How do I find the instructions. THe printer is installed and capable, but I do not see it from either my iPad2 OR iphone 4. Please advise.

1. Make sure you've updated the printer firmware and successfully printed the test sheet from the printer.
2. Make sure that your iPad is on the same network as your printer.
3. Try printing from an app. To print this page from Safari, for example, go to the rectangle with the right- facing arrow on the toolbar, choose Print from the drop down menu, select your printer, and click Print.
Printing in apps is usually under the rectangle-arrow symbol, but is also sometimes found under the wrench- "tools" symbol.

I have apps in my notification center on for notifications (like News apps), with banner and sounds, but i never get the notification from those apps. I tried reinstalling the app and restarting the phone but all in vain

I have apps in my notification center on for notifications (like News apps), with banner and sounds, but i never get the notification from those apps. I tried reinstalling the app and restarting the phone but all in vain

The apps I currently have are for the i phone and i pad but i would like to see this on this computer
On the Mac Air launch iTunes. Then connect either the iPad or iPhone.
Select the iPad or iPhone under Devices left side of the iTunes window in the source list.
Then select Apps from the menu on the right.
If you don't see the apps listed there, from your iTunes menu bar (top of your screen), click Store > Authorize This Computer.
See if that makes a difference...

HT202152 I have tried updating my apps and software but it says my startup disk or hard disk is full. I deleted a lot of files and apps but they won't be erased from the trash. Please help

I have tried updating my apps and software but it says my startup disk or hard disk is full. I deleted a lot of files and apps but they won't be erased from the trash. Please help.

For information about the Other category in the Storage display, see this support article. If the display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
In Photos:
File ▹ Show Recently Deleted ▹ Delete All
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install the app in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C.
For ODS:
security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-
For GP:
security execute-with-privileges /A*/GrandPerspective.app/*/M*/* 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password.
The application window will open behind other open windows. When you scan a volume, the window will eventually show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

When and how does the message context get removed from the message when we use pass thru send port

Friends,
i have a doubt regarding message context.
Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
i mean what exactly happens here to remove the context??
Ravindar

Thanks for the reply.
"The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component. It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
as can any other Component."
yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
"No. The Context already exists on the Message when it comes from the MessageBox and
is equally available to any Component in any Stage. The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration. It is not created by the XmlAssembler (XmlTransmit)"
You are right , the context already exists on the message while it leaves the receive port, and once it persists
to message box the context and message context gets stored in messages in relative tables.
Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
subscriber and a orchestration subsrciber for this message.
Orchestration gets the message with context right!!
if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
while sending it out?. i guess as per SAAkhlaq said,
here sendport(with passthru) should get a pure message without context as passthru used.
or is it that ultimately send adapter removes the context completely?
or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
post.
Ravindar

Why can I Only send mail from my iCloud Account and none of my others yet can receive from all ?

why can I Only send mail from my iCloud Account and none of my others yet can receive from all ?

Morning Allan ,sorry hit the wrong button. Thank you for responding . Meant to reply not notify you that my issue was solved . It's not . I imported all my settings via iTunes and all of the accounts receive mail as I said but can't send . Can you tell me exactly what to change with regard to my outgoing smtp. and PE the authentication ?

If I press "Erase all contents and settings" does the iCloud account get removed from the iPhone?

If I press "Erase all contents and settings" does the iCloud account get removed from the iPhone?
I also do not know the password to the iCloud account and when I go to the "Forgotten Password" link, it says that account is not found.

Yes, but you will not be able to erase it without the password if Find My iPhone is turned on. If you need to reset your iCloud password, read here: http://support.apple.com/kb/PH2617. Of course, you can't reset the password unless it is your iCloud ID.

Hello... How can I un-activate Lightroom 5? It also shows up on my Adobe Account and I'd like to have it removed from there. I am not going to be using the program and I want to give it to someone fully intact. Thanks... David

How can I un-activate Lightroom 5? It also shows up on my Adobe Account and I'd like to have it removed from there. I am not going to be using the program and I want to give it to someone fully intact. Thanks... David

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

Excise invoice posted and paid but stock is yet to removed from Warehouse

Similar Messages

Maybe you are looking for