Excise invoice tab appearing even though J1ID not maintained

Dear All,
For one plant we have done all excise related settings in customization.
For domestic excise will be applicable, while for Import procurement excise to be covered under cost, so we do not need excise tab appearing while doing MIGO for import.
We have not maintained data in J1ID for that particular Material, while Vendor details is maintained in J1ID as it is required for other plants. Though we are getting excise tab while doing MIGO for import. What can be the issue, kindly guide..
Further ..we have maintained this material in J1ID for other plant but not with this particular plant.
Thanks n Best Regards

There are several parameters which will be checked during MIGO like Plant Excise Indicator, Vendor Excise indicator, Valid Tax code and Movement type Relevance for Excise.
If the above criteria is met, system proposes Excise tab though Material & Chapter id combination is not maintained. Depending upon the settings, you get warning or Error message during MIGO for Material & Chapter Id existance.
If the Material is not excisable, you can simply choose No Excise option in MIGO Header under Excise tab.
If the Material is Excisable but Cenvat Credit is not applicable then you have option to change the Material tab under excise tab as Non Cenvatable. This will load the duties on to the Material cost.
I have added the below explanation in addition to my previous reply.
I found something interesting while checking the Excise tab determination during MIGO. System is First checking for Material type and Chapter id in J1ID with Combination of Material and Plant. If found, it will bring the Excise tab in MIGO. If not found, it will search for Material type and Chapter id in Material code only in J1ID. If found, it will bring Excise tab. If not found here also, it will treat the Material as Non Excisable and doesnot propose Excise tab. If you donot want the Excise tab in MIGO, ensure you remove J1ID setting in Node Material and Chapter Id combination. If your Material code is Excisable in Some Plants and Non excisable in other Plants. Then Maintain J1ID with Material type NonCenvatable for those Plants where Material is Non Cenvatable. If Material is Not at all Excisable then donot maintain J1ID in any of the Plants. By doing so, you will not get the Excise tab. Please note that, If you remove MIGO settings from Excise group, then you will not get the Excise tab for any of the Material code belonging to that Plant's Excise group. This is what i understood from the Standard design. In case, if you feel system is behaving differently than i described, do let me know.
Message was edited by: Ashok Kumar Telugu

Similar Messages

EXCISE INVOICE TAB

while doing GR, in some cases excise invoice tab appears after clicking item OK, but in some cases it doesnt. What may be the reason?
What data related to J1ID, I will hav to maintain to get that tab while doing GR in every case? Or any other data wud be missing?

Hi,
in J1ID u have to maintain:
1) chapter id
2) material and chapter id combination
3) cenvat determination
4) vendor excise details
in ur case either for some of the material chapter id and material combination has not been maintained or the vendor excise details is missing.
plz check this things.
regards
jash

Excise Invoice tab not appearing in MIGO

Hi all,
While doing MIGO, we only capture Excise Invoice and Part I is updated. We avail Cenvat thru J1IEX and update Part II separately. We could process both these transactions but after posting, when we display the GR, we can not see the Excise Invoice Tab and Excise item though entries have been posted.
Can anybody suggest how can we bring this tab in GR display
Bhaven Selarka

Hi,
1)Have U created Master Data in J1ID,If U are allready Created Master Data pls Check Mtrl Type(It should not Non Cenvatable)
2)If you are following TAXINN,Then u should maintain Tax code to Company code.
If u are Using TAXINJ,U should maintain Excise Defaults.
3)In Excise Group,U should Activate MIGO transactions.
4)Check ur TAX code,Tax code is Deductable or non dedctable.
Raghu

Excise Invoice Tab Page/ Document Info Tab Page is not appearing in MIGO

Dear Friend
For a particular job work PO , with account assignment category F & item category L, non valuaated material, when we are doing migo, excise invoice tab page/ Document Info tab page is not appearing in document header. From The said tab page we can select the challan.
In J1ID, I have maintained Vendor PAN number and also material chpter id combination.
Thanks
Chandra

Hi
I maintained material chapter Id combination & vendor Excise Details. We do not maintain any plant -vendor combination. This is a non valuated material with material type unbw. Do I need to maintain cenvat determination tab for this material?
Thanks
Chandra

Excise Invoice Tab not appearing in MIGO against STO

Dear Sap Experts,
I am creating MIGO against STO but system does not showing Excise Invoice tab also I have checked all the J1ID and CIN configuration.
Kindly advise why this is heppening.
Looking forward for your quick response on the same.
Regards
Parul

Hi,
Check for below points-
> Supplying plant(Vendor) is excisable
> Material is excisable
> Movement type is made relevant for excise in J_1IMVMT table
Regards,
Brinda

Excise Invoice Tab not appeared in MIGO Display mode

Dear All Guru,
we are facing a problem after posting excise invoice,we are not able to see excise invoice tab in MIGO display mode .We are done all necessary patch uploading but there are some ABAP programming change related to MIGO display.
Pls, send necessary note or some clue.
Thanks,
Abhijit

Hi Abhijit,
How you posted the excise invoice, have you done this posting in MIGO transaction or in J1IEX transaction.
If you have not gor the Excise tab in MIGO while posting you cann't get the same after posting also. You need to do settings for this in IMG settings for the excise group customization then you will get this excise invoice tab in MIGO
Hope you understand.
rgds
Chidanand

Excise Invoice Tab is not display in MIGO for Cancelled document

Hi,
We are execuating the incoming excise cycle then in MIGO and J1IEX.It is perfectly working.But in case of cancellation the excise tab is not dispplaying in MIGO.We are using option "Only Capture and Both Capture & Post".Whatever the excise captured and Posted , it is updated in Excise Invoice tab in MIGO.
As per my understanding the excise tab should come for cancelled doucment also.
Regards
Rajev

Hi,
You are correct it won'y come for 102 but it will come for 101.But it is not coming for 101 .It is not coming when we cancelled the document.
but it will come for 101
.But it is not coming for 101
can you explain your statement ?
If it is not coming for 101 movement type
check following point
1) tax code in PO ,all excise condition should be there
2) Maintain chapter ID material combination in J1ID
3) Maintain Vendor and Plant excise details in J1ID
Regards
Kailas Ugale

Excise invoice tab is not displaying in MIGO

Hi We have created MIGO document with excise details,every thing is fine at the time of MIGO posting,But, when i am trying to
display the material document through MIGO (display),excise details are not reflecting ( excise tab ),we are using ECC 6 EHP4
(604), and this is new implimentation.
Please advice any enhancement is missing or what could be the reason?
Cheers
KK

Hi,
it will come,
at the time of MIGO internal number will generate,
again we will post the excise invoice wrf to internal number through J1IEX,
the above is for the option "only capture excise invoice",
even we can see the excise invoice tab , if we select the capture & post option.
rgds

Excise Invoice Tab should not open at GRN

Hello all,
I am trying to procure assets with account assignment A and without material code. I am using 0% tax. We also do not have any records in J1ID tcode.
However, during GRN the Excise invoice tab is opening up.
One way to get around at GRN is to use " no excise entry". But this tab should not be opening at all.
Can you guess what configuration, if any, might be making the system propose excise for the PO. The PO item is not excisable in fact.
Thanks and regards,
Soumyadeep

Hi,
If you using asset PO without material master with a vendor. Now if you do not want excise TAB should come in MIGO, then remove vendor number in J1ID t.code and then do GR.
If you want to enter excises details , then you should slect check box of "Duty different at GR" check box selected ( so that you can entry manually the excises value in MIGO screen) in MIGO Setting segment in Maintaining Excise Group setting in following path
SPRO ->>Logistics general ->> tax on Goods Movements-->>India -->> Basic setting -->>Maintain Excise Groups
NOTE:
If you want Excise fields are should not be open, then you DO NOT should select check box of "Duty different at GR" in the above path. But think what about Dealer Invoice Scenarios.
Regards,
Biju K

Not showing Excise invoice tab in Migo while Display

Dear SAPient's,
While displaying material document in MIGO. No Excise Invoice tab is showing altough it is there while creating GRN.
please Do needful.
warm Regards,
Bijay jha

Hi,
As you want to see "Excise "Tab in MIGO while displaying material document in MIGO t.code, 1st check do you have authorization to view Excise document, If yes, You can view the excise details in MIGO t.code.
2ndly check, During goods receipt , did the excise duties are captured in MIGO t.code.If yes , you can view all details if you have authorization.
Also check did that material which is excisable have CIN master data in J1ID t.code.
NOTE: To capture excise duties in t.code:MIGO, you need to do following settings:(check did you have such in your system,,,)
Select check boxes of "EI capture" & "Post EI in MIGO" in MIGO Settings segment in Maintaining Excise Group setting in following path:
SPRO --- >Logistics general - > tax on Goods Movements- >India --- >Basic setting --- >Maintain Excise Groups
Also set entry of 101 Movement Type for capturing Excise Duties in following path:
SPRO --- >Logistics general - > tax on Goods Movements- >India - >Business Transactions->Specify Which Movement Types Involve Excise Invoices
Regards,
Biju K

Excise Invoice Tab is not displaying in MIGO Display for 541 material docs.

Dear All,
Excise Invoice Tab is not getting displayed in MIGO Display for 541(Transfer posting to Vendor) material documents.
I did tranfer posting of some raw materials to the Vendor in MB1B with the movement type 541
and after that i have created a Subcontracting Challan with the reference of the above created transfer posting
material document.
Now i need the Sub contracting challan number to be displayed in the Excise Tab of the transfer posting material document.
But if i display the Transfer posting material document in MIGO, the Excise Tab is not getting displayed.
Kindly help on this so that i can view the Sub contracting challan number in the display of the respective Trasfer posting material document in MIGO.
Thanks & Regards.

Pls confirm if you are following the SC process sequence :
u2022     Creation of Subcontracting PO, here in conditions tab maintain the price (Subcontracting charge) (ME21N)
u2022     Transfer Posting of Components to Subcontractor ( Movmt Type - 541) (MB1B/ME2O/MIGO)
u2022     Creation of Subcontracting Challan w.r.t. Transfer Posting Doc (J1IF01) - This challan will have the details normally company needs, in case client need more ... ABAPer have to develop customized smart form
u2022     Goods Receipt w.r.t. Subcontracting PO and Refer Subcontracting Challan at the time of GR (MIGO) {GR with 101 and auto consumption of components with 543 movement}
u2022     Reconciliation of Subcontracting Challan (J1IFQ)
u2022     Completion of Subcontracting Challan (J1IF13)
u2022     Generation of Annexure IV (J1IFR

In addition to my home page, every time I start Firefox a tab opens with notifacation of an updated addon. Why does this tab continue to appear even though there is no updated version of the addon?

In addition to my home page, every time I start Firefox a tab opens with notification of an updated addon. Why does this tab continue to appear even though there is no updated version of the addon?

See these articles for some suggestions:
*https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved

HT5312 i am having problems editing the security questions i do not remember i specifically followed the steps and the "send to rescue email" option does not appear even though my rescue email is verified please help me

i am having problems editing the security questions i do not remember i specifically followed the steps and the "send to rescue email" option does not appear even though my rescue email is verified please help me
<Email Edited by Host>

As these are public forums, you're not talking to iTunes Support, I've asked the hosts to remove your email address from your post - it's not a good idea to post it unless you like spam email.
The reset link will only show if you have a rescue email address on your account - a rescue email address is not the same as an alternate/secondary email address, they are different addresses/settings on an account.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

"Only Part I" for Goods receipt (MIGO) in excise invoice tab

Dear Gurus,
I have configured a material with all CIN configuration setting, while doing goods receipt for that material I want to capture excise invoice through excise invoice tab, for which i need to select " Only Part 1" in the invoice tab.
But in my currrent senario while posting goods recipt, In excise invoice tab, I am not detting " Only part 1" option when i select excise invoice tab.
How to configure "only part 1" option to appear in excise invoice tab.
Kindly help...
Regards,
Prashanth Pai

Hi,
Check in
Tax on Goods Movements - India - Business Transactions - Incoming Excise Invoices - Specify Which Movement Types Involve Excise Invoices -
ensure that RG23A & RG23 C Register is maintained against the movement types you are using.
Regards,
Vikas

Excise invoice tab missed in migo screen for import material

Hai,
What we had done,
1 we raise import po.
2 we posted MIRO for custom invoice purpose,
Next when we are doing Migo entry Excise invoice tab is not display.
What is solution for this issue ?
What we have checked.
1. J1id all combinations, means Chapterid with material, cenvat determination, vendor excise details, Excise indicator for plant,
Excise tax rates.
2.At the time of po they ticked invoice base.
3 We checked movement type 101 for excise duties.
4.we checked excise group also in this Excise invoice captured is ticked.
5.. i also checked table for movement type.
Note: Against this material master no entry is there so this is first time material.
Relating to this vendor previously we have entries relating to other material masters.
What is solution for this issue ?
Why it is not displayed in MIGO Screen ?
Regards,
Basha.

Check the following
1. Chapter id maintained in material master or j1id.
2. Cenvat determination maintained
3. Tax indicator for plant and vendor.
4. Import conditions rightly classifed under defaults.
5. Movement type rightly classified
6. In case you have created a new plant check for following in the client you are doing the transaction
IMG>>Logistic-General>>Tax On Goods Movements>>India>>Basic Setting>>Maintain Plant Settings
7. Check if you have not done any enhancements, some times this may happen if any enhancement done.
If all this is checked and in order it should work.
Regards
Sangeeta

Excise invoice tab appearing even though J1ID not maintained

Similar Messages

Maybe you are looking for