Excise invoice using taxinn procedure.
I am using TAXINN(condition based), so i am using all the default/standard condition type in the said tax procedure as well.
Tax on Goods Movements - India - Basic Settings - Determination of Excise Duty - Maintain Excise Defaults
i maintained only the CVD cond, since i am using condition based.
next on FV11,
i created the condition records for the condition type(in TAXINN) using key combination of (plant/vendor/material).
i only maintained 2 condition type which i need so far(JAIP and JSIP).
next on ME21N,
after i created the PO, under invoice tab, i clicked on the "TAXES" button. the 2 tax condition type JAIP(IN AED inventory %) and JSIP(IN SED inventory %) are showing the the correct % and amount.
next on MIGO-GR for the PO,
under the excise item tab, the amount is not showing up for the JAIP and JSIP, it's still 0.
but for the BED field, it's showing the correct amount from the pricing determination condition type that i defined in CVD cond.
why is the AED/ SED still showing zero but in PO the correct amount is showing??
another question on the defining of tax code
Tax on Goods Movements - India - Basic Settings - Determination of Excise Duty - Condition-Based Excise Determination - Define Tax Code for Purchasing Documents
i can't seem to enter the Tax Percent Rate for the cond type in the tax code, it will be blank out the next time i access the tax code, is it supposed to be like this since i had already maintained the 2 tax condition type earlier on using FV11?
Pls take note that i have done all the necessary tagging assignment of tax procedure/tax code to the company code and this is where i get the step for configuring TAXINN procedure. http://it.toolbox.com/wiki/index.php/SAP_CIN-MM_Customizing_For_Tax_Procedure-TAXINN
is there any missing steps in it?
Hi
The error message you have posted, lot of threads are there in this forum, hope some of them are useful.
error : balance in transaction currency
Balance in Transaction currency
Re: Balance in Transaction Currency-J1IIN
Regards
Vamsi Javaji
Similar Messages
-
Maintain Excise defaults for pricing condition in TAXINN procedure
Hi all,
I post this message as I'm customizing CIN part for creation and calculation of excise invoice. I have read lot of post but i'm a bit confused about right procedure to adopt. I try to explain:
I'm doing a stardard sales flow (sales order -> delivery -> commercial invoice -> excise invoice) and the only method I have found to flow excise values in excise invoice is to insert pricing conditions in India -> Basic settings -> Determination of excise duty -> Maintain excise defaults for TAXINN procedure.
In this table I have insert pricing conditions I use in my SD pricing schemas (in this case I use a copy of JINFAC). I have insert pricing conditions corresponding to BED % and BED total, and also CESS % and total and S&HCESS % and total.
If I remove pricing condition from this table, corresponing value in excise invoice, when I create it, become 0.
My dubt is if is correct to populate with table to flow excise values in excise invoice. I ask it as I have read differents approach and differents customizing settings applied in similar situations. In particular, I have found documentation in which, for TAXINN procedure, is recommended to leave blank "excise defaults" (with exception of CVD condition). What is the right method to use?
There is one right procedure or, as it seems reading posts, someone have to do his "proper CIN customizing" based on results that have to obtain?
Thanks in advance for any contribute that can help to clarify this situation.
Regards
GianpaoloHi all,
I think to have found solution to my dubt.
If I use "condition based Excise determination" I have to insert records with pricing schema (if is a copy of standard J* schema, like ZINFAC that is a copy of JINFAC) and excise pricing conditions in the transaction below:
India -> Basic settings -> Determination of excise duty -> Condition-based Excise determination -> Classify condition type
To determine value in excise invoice seems that program check before table in transaction described before. If in this table don't find records for pricing schema-excise pricing condition the program check also table in transaction below:
India -> Basic settings -> Determination of excise duty -> Maintain excise defaults
If during this second check find excise pricing conditions insert, can determine equally the values of excise in excise invoice.
This is the result of my checks. I hope this could be useful for other people with similar problem. -
Creation of Excise Invoice in J1IS Transaction - using DLFC ref. doc. type
Hi,
I tried to create the excise Invoice using Ref. Doc Type DLFC in J1IS by giving the material document. But it is not allowing me to process further.
The business process requirment is to create a Supplementary Excise Invoice(Customer is Billed for a lesser value earlier)
we tried the following:
1. Credit memo request
2. Credit Memo
3. Excise Invoice in J1IS using sub.Tran Type(to map the Sales exc Inv Accounts). The reson why we used J1IS is to meet the requiremnt of generating the Outgoing Excise Invoice Number which is not possible in J1IH.
Now the issue is, the excise invoice created in J1IS is not available for Utilizaton in J2IUN
Please Suggest what process to be followed to address the issue.
regards,
GirishIn normal circumstances, it is not possible to generate an excise invoice for credit / debit notes in SAP. Moreover, DLFC excise invoice type can be generated only if delivery is involved. So in order to achieve the requirement (and fool the system :-|), you can try by creating a delivery with an item category as TAX so that it will not check for stock, do PGI and invoice (credit memo) can be generated referencing credit memo request. Finally, try to generate an excise invoice via J1IIN
I have never tried this option and hence, its only a guess that this should work. Update after testing.
thanks
G. Lakshmipathi
Edited by: Lakshmipathi on Jul 26, 2011 2:07 PM -
Regarding Error in Tax Codes after Creation of Excise Invoice.
Dear All,
We are using TAXINN Procedure,I have maintained condition records and given the correct tax codes in them for Basic Excise Duty,Secondary Cess and Higher Secondary Cess on the table 357,however after checking the accounting document which is created post creation of excise invoice the wrong tax codes are getting picked up however when i create my commercial invoice and check the tax codes the correct tax codes are coming,please advice what needs to be done to rectify this error.
Best Regards
Atul KeshavThis query is now resolved
-
Error in Tax Code after Creation of Excise Invoice
Dear All,
We are using TAXINN Procedure,I have maintained condition records and given the correct tax codes in them for Basic Excise Duty,Secondary Cess and Higher Secondary Cess on the table 357,however after checking the accounting document which is created post creation of excise invoice the wrong tax codes are getting picked up however when i create my commercial invoice and check the tax codes the correct tax codes are coming,please advice what needs to be done to rectify this error.
Best Regards
Atul KeshavHi
If you are using TAXINN procedure, check apart from VK11 check you have maintained TAX CODE for excise condition types. Example FTXP or VK19 (using application as TX). Also check whether you are using UTXJ condition type. If you are using UTXJ condition type then please remove it.
For TAXINN you need not have UTXJ condition type.
Regards
MBS -
Excise Invoice not captured in MIGO
Hi..
I am using TAXINN procedure in which I am using JMOP condition type for BED. In ME21N I am able to see the condition type and values for BED. and I maintained that I can capture the excise invoice at MIGO level.
But while creating MIGO The values are not picked up from the condition type. I have checked all the tax code (2 Tax code) combinations but in vain.
please tell me where is the problem...How the excise data flows from ME21N to MIGO.
Regards
RahulHai,
Maintain the settings in
1.SPRO - IMG - Logistics general - India - Basic settings - Maintain excise defaluts - Maintain the Condition type in the columns for the Tax procdeure TAXINN.
2.SPRO - IMG - Logistics general - India - Basic settings - Condition based excise determination - Classsify condition types.
3.SPRO - IMG - Logistics general - India - Basic settings - Business transactions - Incoming excise invoices. here maintain 101 mvt type with registers. -
BED NOT FLOWING TO EXCISE INVOICE J1IIN
HI SAP GURUS
can anybody help me the bed value is not flowing from invoice to excise invoice ecess,hecess,is coming properly we are using taxinn procedure i checked in excise defaults there it is jexp only i also assigned ett to concern gl accounts and i assigned jexp in classify condition types to zinfac to jexp.one thing is we recently changed taxinn to zaxiin.IMG->Logistics general->Tax on goodsmovements->India->Basic settings->determination of excise duty->Maintain Excise defaults. Here you maintain your excise condition types.
Check whether you maintain G/L accounts for your transaction types just under excise acoounts for excise transaction.
Regards,
Deepu Pillai -
CIN : Excise invoice before Commercial Invoice
Hi All,
Please tell me how to configure TAXINN and CIN settings in case, when we want to create excise invoice before commercial invoice.
I know this can be done but don't know how, please help.
Thanks and regards
AmitHi Amit.,
TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate access from Maintenance screen, which you can Masterthe SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure of Data ScreenMaterial Master Configuring the Material master Screen Sequence. for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
REWARD if helpfull
Thanks & Regards
Narayana -
Excise invoice creation for Debit Memo or Credit Memo
Dear All,
I have to create Excise Invoice J1IIN with reference to Debit Memo in Differential Invoice Senario.
When i goto J1IIN it shows Customization for Document is missing in table Billing Reference type.
How to create Excise invoice for Order related billing.Plz solve my problem.
Award Pts for useful answers.
Thx & Regards,
PankajCIN Configuration for Excise Invoices in case of RETURNs
Basically CIN is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Maintenance screen, which you can MasterExcise Rate access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure ofData ScreenMaterial Master Configuring the Material master Screen Sequence.for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
Transaction
Action
J1I2
Prepare a sales tax register
J1I3
Create outgoing excise invoices in batches
J1I5
Update the RG 1 and Part I registers
J1IEX
Incoming Excise Invoices (central transaction)
J1IEX_C
Capture an incoming excise invoice (excise clerk)
J1IEX_P
Post an incoming excise invoice (excise supervisor)
J1IF01
Create a subcontracting challan
J1IF11
Change a subcontracting challan
J1IF12
Display a subcontracting challan
J1IF13
Complete, reverse, or recredit a subcontracting challan
J1IFQ
Reconcile quantities for subcontracting challans
J1IFR
List subcontracting challans
J1IH
Make a CENVAT adjustment posting
J1IIN
Create an outgoing excise invoice
J1IJ
Assign excise invoices to a delivery for sales from depots
J1INJV
Adjust withholding tax Item
J1INREP
Reprint a withholding tax certificate for a vendor
J1IQ
Year-End Income Tax Depreciation Report
J1IR
Download register data
J1IS
Process an excise invoice (outgoing) for other movements
J1IU
Process exemption forms
J1IW
Verify and post an incoming excise invoice
J1IX
Create an incoming excise invoice (without reference to purchase order)
J2I8
Transfer excise duty to CENVAT account
J2IU
Remit excise duty fortnightly
J2I9
Monthly CENVAT return
J1IG
Excise invoice entry at depot
J1IGA
Create additional excise entry at depot
J2I5
Extract data for excise registers
J2I6
Print excise registers
rewards if it helps -
Hi Guru's
While creating excise invoice using tcode J1IIN wrt commercial invoice (created with vf01), I am getting an error
Field Assign. is a required field for G/L account SELC 215210
Message no. F5808
Diagnosis
The value for field "Assign." in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "215210" in company code "SELC" linked to the field selection for posting key "50".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Assign.". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.
and subsequently when I press the enter button again I get another error
System failure during locking GLaccount SELC by 761010
Message no. 8I076
I have tried everywhere in SDN and with friends but still I am unable to solve this error.
Please help to solve this error.
Thanks
satishHi Krishna
Thanks for responding
Both the G/L A/C's mentioned above has not been ticked for automaic postings in FS00
Moreover we have the same settings activated for the other company code which uses the same set of G/L's.
But there is no problem while creating excise invoice in the other company code where the same set of G/L A/C's are in use.
Still I am unable to solve this errror
Please help.
Thanks
satish -
Vendor return excise invoice cancellation
Dear all,
How to cancel vendor return excise invoice, which has been created using J1IS/J1IV T-code.
When I try to cancel the excise invoice for vedor return in t- code J1IH, system is giving the below error
Excise modvat accounts not defined for CEIV transaction and excise group
Message no. 8I402
Note: When we try to cancel customer excise invoice system is not throwing the above error.
from configuration point of view, i have done the all the possible config. but still system is throwing the following above error.
1.Config. for CIEV:(ETT-Excise grp--CC)
CEIV ::::::::::::::: CR Credit :::::MSUSP CENVAT suspense account
CEIV ::::::::::::::: DR Debit :::::PLAAED PLA AED account
CEIV ::::::::::::::: DR Debit :::::PLAAT1 PLA AT1 Account
CEIV ::::::::::::::: DR Debit :::::PLABED PLA BED account
CEIV ::::::::::::::: DR Debit :::::PLASED PLA SED account
CEIV ::::::::::::::: DR Debit :::::RG23AED RG 23 AED account
CEIV ::::::::::::::: DR Debit :::::RG23AT1 RG 23 AT1 Account
CEIV ::::::::::::::: DR Debit :::::RG23BED RG 23 BED account
CEIV ::::::::::::::: DR Debit :::::RG23ECS RG 23 ECS Account
CEIV ::::::::::::::: DR Debit :::::RG23SED RG 23 SED account
2. G/L Account determination configuration for the same has been done.
Please guide me, how to resolve this error.
note: I tried to cancel the vendor return excise invoice using J1IS--> Cancel excise invoice but system is not able to generate any document.
please help me.
manoj singhIf the system is throwing the error as i menstioned, follow the procedure to resolve the issue.
1. Check the Excise account determination is configured properly.
2. insure the Vendor return Excise doc. to be cancel.
3. Use the J1IH wrt to Official Excise Document Number instead of internal doc. no. to cancel the J1IS/J1IV transaction.
hope it helps.
manoj singh -
Hi all,
We are using taxinn procedure to calculate the taxes.
How can anybody justify the selection of Taxinn , when there are hundreds of vendors , materials and in Taxinn then we have to maintain so many records in FV11.Why should we use it then?
Why not Taxinj?Any advantage of using taxinn over Taxinj?
Please explain.
Regards,
DeepiksHi Deepika,
SAP has provided us two tax calculation procedure for India
1. TAXINN
2. TAXINJ
In older versions TAXINJ was used moreover but now days TAXINN is used coz in TAXINJ maintaining all excise related data of vendor/Material/Plant/Customer and tax rate maintenence was more laborious as compared to TAXINN. I am telling you from my experience that TAXINN is far more versatile than TAXINJ.
Now coming to your second query
when there are hundreds of vendors , materials and in Taxinn then we have to maintain so many records in FV11
See while maintaining tax rates in relative condition type you can use one table for tax classification and put in your access sequence it will reduce your vendor/material combinations.As it will be applicable to all kind of purchases.
I hope you must have gotten some solution of your problem
Regards
Vivek Sharma
Rate my answer as you wish -
Hello Guru
In stock trasfer oder (plant to plant or co code to co code) with Ci
how is procedure
where we can use out going excise invoice (J1Is) plz tell me details of this one
stock trasfer order with CIN
SapHi ,
Follow the links,
http://help.sap.com/bp_bblibrary/500/Documentation/J52_BB_ConfigGuide_EN_IN.doc
The issuing plant has processes your order, and when it is ready to ship:
The storeperson at the issuing plant issues the goods using a transfer posting.
The excise clerk there creates an excise invoice
The excise supervisor verifies and posts the excise invoice.
It then sends the goods to you, together with the excise invoice.
Once the goods arrive, you follow the standard procedure for incoming excise invoices:
The excise clerk captures the excise invoice, using the stock transport order as the reference document.
-The storeperson enters the goods receipt, again using the stock transport order as the reference document.
Alternatively, you can first enter the goods receipt and then capture the excise invoice.
The excise supervisor then posts the excise invoice
Regards
haree -
Setup for printout of excise invoice j1iin
plz can any body tell me how to set print out put for normal excise invoice using j1iin
Hi,
go to IMG-sales & distribution-basic functions-output control-output control using condition technique-output control for billing documents.
Here you create condition table, access sequence, output type, procedure or you can copy from std and rename. For output type use J1I0-excise invoice.
A standard print program and form will be assigned to it. Keep everything same. In your output procedure assign the output type J1I0 and save it. Assign the output procedure to your billing document type which you create in VF01.
Go to VV31 - create condition records for billing type. Here you select your customer , then after selecting your output type double click on it and choose the communication mehtod, select the printer and save the reocrd. The partner function will automatically come once you type J1I0 and press enter.
Now run your sales cycle and create your invoice in VF01. The system will give you a number. Go to J1IIN and create your excise invoice and save it.
Now go to vf02, select the original number and isue the ouput and you will get your ouptu of excise invoice.
Unless and until you create excise invoice the system will not show you the print preview of your excise invoice in VF02.
Follow the steps as mentioned above. I Hope I have answered our query. Reward valuable points if solution helps.
Regards,
Allabaqsh G. Patil -
Tax codes are confighured using TAXINN Procedure- Now the client requires to maually put the Tax amount in certain cases. I am aware that Tax codes once created will not allowed the user to manually put the TAx amount at the time of PO creation.
Is there any way out to allow this for certain tax codes and not for alll Tax codes ? Any user exit or fielld exit available ?
ThanksDear Sanjay,
Check out the below link
Re: JEXC-Manual Excise Condition and JEXS,
Re: how to change 'display taxes' into change taxes in PO (item details )
Regards
Manish Kumar
Edited by: Manish Kumar on Oct 28, 2010 8:16 AM
Maybe you are looking for
-
My imac wont start up the wheel just spins
my screen went high contrast. i could not force quit so i powered off. when i powered on the wheel just spins. this has been going on for an hour.
-
How do I get my downloaded ringtones back after updating to 7?
They show up in iTunes and I have tried unchecking them, syncing, checking them again, and syncing again.
-
This is occurring on the website Virgin Mobile. I was asked to perform some upgrades on my computer and now I am unable to get the content of my call history to display on a screen within this website. The 2nd window will display quickly and then shr
-
I have imported this file as per the instructions. It imports to the SYSTEM tablespace. Have tried many ways fruitlessly to import it to its own tablespace. How can this be done
-
Distribution lists in Address Book don't stay set
I have several groups I e-mail regularly and many of the people on the lists have multiple e-mail addresses. I know to go to Edit Distribution List to select which one I want that group message to be sent to, but the selections don't seem to stay sel