Excise Invoice with reference to Commercial Invoice

Hello Experts
My client has third party software. In SD- Order to Invoice cycle is done in that software.
After Invoice is created the data is interfaced and Invoice is received in SAP.
Now my doubt is that will it be possible to create the excise invoice with reference to this commercial invoice.and if so, what should I assign in config- Assign Del types to Invoice Types.
Please advice.
Best Regards
Raghu

Hi
    Your scenario is not very clear to me although i am trying to attempt for the solution. Generally F2 invoice will take care of commercial *** excise invoice requirement. If material is excisable & attracts commercial taxes like CST or VAT you can geit through F2 invoice. You can have print programme developed for the invoicing where heading print will be like "Commercial *** excise invoice".

Similar Messages

  • Problem in generating excise invoice with reference to commercial invoice

    Hi,
    I could able to generate excise invoice with reference to STO ( jex ) invoice but unable to generate with reference to commercial invoice ( F2) .System is show 'error in creating FI document'.  Am i missing some configuration.
    Please advice
    Thanks
    satya

    Hi
    Check the G/L accounts assignments for Excise transaction types DLFC,
    Also check the NUmber ranges in OBA7, and also the accounting doc type for excise invoice
    regards
    Prashanth
    Edited by: Prashanth@SD on Feb 3, 2011 8:27 AM

  • Creating a Invoice with reference to another invoice with new pricing proce

    Hi People,
    I want to raise a supplimentary excise invoice for the differential price.
    I want to do it by raising a supplimentary commercial invoice with reference to the old invoice but with a new pricing procedure assigned to it.later on raise the supplimentary excise invoice with Tcode j1iin wrt the new commercial invoice.
    Although i have done all the necessary configurations such as determination of new pricing procedure, Doc pricing Procedure and changing the pricing type at the copy control settings of the item category to "B".
    i am unable to get the new pricing procedure when i am creating the supplimentary commercial invoice.
    Can u people suggest me in this regard

    Dear Nagabhushan
    Normally for price difference, there is an order type RK for "Invoice Correction Request" which should be created in reference to F2 billing document.  Based on this, you can issue credit memo (document type G2). 
    This being the case, you cannot create supplimentary invoice with reference to original invoice.  Moreover, for all excise related adjustments, you should not use j1iin.  You should run j1ih - Other adj.
    thanks
    G. Lakshmipathi

  • How to create excise invoice with reference delivery document

    hi all sd guru
    please guide me how to create excise invoice by taking reference of delivery no.
    thankx in advance
    san

    HI
    FACTORY SALES
    IN CASE OF FACTORY sales you have to create a billing document either Proforma or Commercial.
    Then you can reference the billing doc i9n J1IIN for creation
    DEPOT SALES
    In case of depot sales you can create a excise invoice with reference to delivery document.
    For this after creation of delivery goto J1IJ  and slect the rg23d from menu
    you can create an excise invoice with delivery in depot sales.
    In factory it is not possible to create a excise invoice with delivery doc.
    regards
    Prashanth

  • Excise Invoice with Reference to Delivery

    Hi,
    i want to create Excise Invoice with reference to Delivery *without creating "JEX"*(Proforma Invoice)
    OR->LF->J1IIN->F2 ie. Commercial Invoice after Excise Invoice. is it possible?
    Regards,
    Amol

    Hello Amol,
    you can create with reference of the deliveyr document. in J1iin trnsaction you have the option in the header tabs of create from delivery
    enter the delivery and create the excise invocie
    Hope this helps
    Thanks
    akasha

  • How to create excise invoice with reference thorugh credit memo

    Hi All,
    Please provide any solution for the following qurey:
    How to create excise invoice with reference thorugh credit memo

    Hi murali,
    i am unable to understand your requirement i think there is no like this scenario requirement for any client
    if any requirement is there kindly explain detail
    cheers

  • Excise invoice with reference to credit memo/debit memo

    Normally we create Excise Invoice with reference to Inter company Invoices . Is it possible to create Excise invoice w.r.t. Credit Memo/ Debit Memo. If Yes , then what are the settings that needs to be maintained and where?

    Excise JV thru J1IH transaction is one option. It gives you 6 options.
    1.Material Doc for written off
    2.materail doc for non production
    3.Additional Excise
    4.Other adjustments
    5 TR6 Challan
    6.Cacel Excise Invoice

  • Excise invoice with ref to proforma invoice

    Hello guru's
    when i create excise reference in J1IIN with reference to Proforma invoice
    the excise duties are not flowing to excise invoice but the values are capturing in proforma invoice
    regards

    Hi ANtima & swamy
    Thanks for ur input my problem solved and the values are flowing to excise invoice
    so my sales cycle is
    consignment fillup
    delivery
    vf01 proforma invoice
    excise invoice.
    Now in Consignment Issue
    sales order
    delivery (here also i had to do PGI
    commercial invoice
    here system is allowing me top create excise invoice once again also actually it should not be as i already created in consignment fillup
    regards

  • Return Cycle  with reference to cancelled invoice

    Dear All,
    There is a issue with the client  where in  the return sales order is happening with reference to cancelled invoice.  How to block the returns sales order from taking the cancelled invoice.
    1. Is this a normal standard behaviour of the system ( whether it will accept the cancelled invoice when trying to input in the returns order ?
    2.  Or Can we block the cancelled invoice from entering in the returns sales order process.
    Regards,
    Kumaresh

    Hi Kumaresh,
    1. Is this a normal standard behaviour of the system?
    Yes.
    2. Can we block the cancelled invoice from entering in the returns sales order process?
    Yes. By assigning Routine in Copy controls.
    Please find the Below link
    Returns referred to an invoice that is already cancelled
    Thanks
    Dasaradha
    Edited by: dasaradha ramireddy on Jan 20, 2012 1:04 PM

  • ERP invoice with reference to SRM Basic Contract?

    Hi
    In SAP SRM you can create a shopping cart or a PO with reference to a SRM Basic Contract by setting the item number to 0 like: 4700000107/0
    But with the new Ehp1 SAP states that ERP invoices can be created with reference to a SRM central contract (via SRM_SERVICE_PROC_1). But can you create the invoice with reference to contract item 0?
    The idea is to have the non PO related invoices registrered on the basic contract in SRM along with the PO's. A basic contract can't be copied to ERP, as there is no lines on it, but is the ERP contract copy needed for this scenario?
    So two questions:
    - is the ERP contract copy from SRM needed to use the Ehp1 functionality of creating invoices with reference to a SRM contract?
    - can the ERP invoice be created with reference to a basic SRM contract by giving the contract item as 0 or in another way?
    BR
    Jacob

    Hello,
    With SRM 70 EHP1 you can create ERP invoice against your SRM Central Contract distributed to ERP.
    To enable this you need to do few settings in ERP, for the same you can refer to the config guides available at Service market place for SRM701 releases.
    Configuring Contract Handling for Invoices : You use this procedure to configure contract handling for invoices in the SAP ERP system. You have activated the Procurement - SRM Integration 2 (LOG_MM_P2PSE_2) business function in the SAP ERP system.
    Steps :
    1. In Customizing for SAP ERP, perform the activity under :  Materials Management -- Logistics Invoice Verification -- Incoming Invoice -- Activate Direct Posting to Contracts , to allow direct references to contracts when creating invoices and parking documents.
    2. In Customizing for SAP ERP, perform the activity under : Materials Management -- Logistics Invoice Verification -- Invoice Block -- Set Tolerance Limits , to set the tolerance key for contracts (PC: Price variance for contract).
    The feature is termed as Invoice Reconciliation here.
    Best Regards,
    Rahul

  • Single Invoice with reference to 2 Sales Order

    Hi,
    How can i make a single  billing invoice no (vf01) with reference to 2 sales order?
    billing plan has been maintained from each sales order,we dont have any pgi process.
    so process is sales order->billing plan-> invoice
    my user want to generate single invoice with reference to 2 sales order - same customer no.

    For processing  billing due list (VF04) - The system combines documents with the same customer number, proposal billing type and sales organization, and attempts to include them all in the same billing document. If the preconditions are met, then a single invoice is created for the deliveries and/or orders.
    To do a collective billing. Collective Billing Documents
    The selected documents in the billing due list are billed. The system tries to combine them as much as possible. Processing of the selected documents is carried out in the background. After processing of the documents, you return to the billing due list. The sysytem will indicate whether or not a document has been billed successfully.
    If successful, then Save
    You can also carry out a simulation of billing. In this case, select Simulate. The system simulates the collective billing / online function described above.
    -After the collective run you can display a log for the collective run. This displays possible errors during billing.
    -You can also branch to the resulting billing documents, in order to carry out a split analysis.
    -The billing documents of a collective run can also be canceled.
    Re: VF04
    Hope it assist you.
    Thanks & Regards
    JP

  • Posting a Credit Memo with Reference to the Invoice

    Dear all,
    I'd like to post a Credit Memo with Reference to the Invoice but in transaction FB65 or I can't find field to input Reference to the Invoice
    Please tell me where I can Reference to the Invoice
    Thank in advance
    Minh

    Dear all,
    When I create a a Credit Memo (Transaction FB65),
    On the Payment tab page in the Enter Vendor Credit Memo,the system doesn't display field Invoice Reference to input Invoice document number of an invoice reference exists.
    Please tell me how to configure to display field Invoice Reference
    Thank in advance
    Minh

  • Message V1478 - Credit memo request with reference to an invoice

    Dear all,
    Creating a credit memo request with reference to an invoice, I get the following message "Material in item 000060 does not exist in plant/storage location".
    Of course, this material exists in the plant and the storage location, as we could create the invoice without any problem.
    Any idea?
    Best regards,
    Iné

    Hello
    Generally, these errors may appear due to:
    - The plant is marked for deletion.
    - The plant should be copied from the referenced item.
    So, I would suggest you to
    - Check copying control for Invoice to Credit memo request, particularly, item.
    - Try and create Credit Memo Request with reference to sales order.
    - Or if you want rectify a invoice, then use invoice coreection request.
    Thanks & Regards
    JP

  • Return Order with reference to Proforma invoice

    Dear All
    Is it possible to create a return order with reference to proforma invoice. How ?? if possible.
    Our scenario is when we do stock transfer order and truck meets with an accident or anything and material needs to written to the factory premises. we dont want to complete proforma invoice.
    Suggestions PLZZ
    Regards-
    Ram

    I don't see any the relevance or logic of creating of return order from proforma invoice.
    You can follow - Returns flow:
    PO type is same ( Intercompany STO PO type is NB )
    While you make this PO there is a return indicator check box at the line item where you will give qty etc (scroll on the rt side)
    Tick that
    Then save the PO with all other information
    There is a configuration Return delivery type has to be assigned
    IMG-MM-Purchasing-PO-Returns Order-Return Plant to Plant
    Here for your plant you need to assign delivery type as NCR This config is reqd to be done from your end
    So, the Flow would be
    - ME21N (with returns indicator)
    -VL10B
    -VL02N (delivery type will be NCR ) & do a PGR here
    -VF01 do billing with reference to delivery created
    I Category in del will be NCRN & M type will be 673
    If you are using standard document types system will pick billing type as IG which is nothing but a intercompany credit memo
    Copy controls between NCR and IG in VTFL is already there in standard
    For understanding also, refer following link:
    return process intercompany stock transfer
    Hope this can assist you.
    Thanks & Regards
    JP

  • DRQ payment on account with reference to an invoice

    Hello,
    In SBO2005A  there was a problem with the open balance BP concerning the next situation
    create an in- or outgoing payment by
    1. select the customer/vendor
    2. Select an invoice (example invoice 100 EUR)
    3. go to moneybag and enter an amount of 99 EUR
    4. Try to save the payment.
    5. system will give you a message the amount to be paid is not equals the invoice SAVE payment
    So far so good.
    Now when you save the invoice also in SBO2007A you will save the invoice with reference to that payment and the mark: payment on account will be active. the only improvement from SBO2005A and SBO2007A is that at least the balance is correct ( this scenario is one of the fixes when upgrade to sbo2007A reconciliation errors).
    In my opinion this is wrong behavior. One way or the other. A payment is with reference to an invoice and then it would be in this case a partial payment or the payment is on account and then there should be no reference to that invoice.
    In my opinion the correct behavior must be after saving the payment:  error message: please create a partial payment or select payment on account because selected amount and payment amount are not equal.
    With regards,
    Eddy Rademakers

    Hello Kerstin,
    I know this functionality and It could be usefull when the over under payment is just a small amount.
    But in principal even with this functionality in my opinion a payment could be only
    a payment with reference to one or more invoices or a payment on account and not both as it is now in the current SBO.
    The current behavior is wrong:
    Based on the scenario as described above the payment should be: the mark: payment on account YES.
    and no relation to the invoice(s).
    with regards,
    Eddy

Maybe you are looking for