Excise not coming in Display J1IIN
D Friends,
The issue is as follows:
Plant A to Plant B (Same Co. Code). It is a Deemed Export scenario. In SD pricing proced the Excise cond type (JEXP) is maintained as Statistical.
While creating Excise Invoice w.r.t. Commercial Invoice Excise duty comes in BED field. In Export Invoice type I'm selecting Deemed option.
But when I display the Excise Invoice the Excise duty does not come. It is Zero, as shown in the screen shot. In this case pric procd is ZIT02.
However if the scenario is Deemed Export from Plant A to Plant C (different Co. code) Excise invoice is coming in Display mode and therefore it is coming in ARE 3 also. In this case pricing proced is ZIT01, but Excise Cond type is same.
Both the pricing procd are maintained in IMG--> CIN--> Classify Condition type.
I've searched the forum, but could not find solution. Hence pl let me know what I'm missing. I've configured a new scenario from Plant A to Plant B. TAXINN is used here. Plant A to Plant C was already running successfully. Pl help.
Thank you very much folks.
Lakshmi,
From next time I will post CIN issues in Internationalization and Unicode.
Now coming to the issue. I've already mentioned in the last line that TAXINN is configured. I've mentioned two scenarions:
1. From Plant A to Plant B and
2. From Plant A to Plant C.
Excise Cond type is same in both the scenarios which is JEXP.
Pri Procedures are different.
In scenario 2 Excise condition is perfectly coming in J1IIN but in Scenario 2 Excise condition comes during creation but vanishes in Display mode of J1IIN. So if it is coming in Scenario 1, then I think it ensures that its FV11 must have been maintained. I can not see due to missing authorization. Pl suggest why Excise condition is not coming in J1IIN in scenario 2.
Thank you.
Similar Messages
-
Hi
I have created a tax code but when I am using it in PO then for some materials the excise amount is coming correctly (12% on 100% of base amount ) and for some materials it is coming as 0%.I have maintained the required settings for the materials I am using in j1id.What could be the problem?
ThanksWhen I am changing the vendor pricing procedure is changed so as the tax procedure.Excise amount is not coming correctly.
Regards
Raj -
Adobe layout design is not coming
Hi Everyone,
In my webdynpro abap or in Adbe form creation in SFP also the Adobe layout design is not coming. Displaying an error message stating that ' Could Not start Layout Design'. Can any reply me the root cause for this Adobe layout problem.Hi,
There could be two reasons for this.
1. Check under ABAP connection in SM59 for ADS service running or not. It must be active. You may test the connection or check with Basis Team as well.
2. You need to install Adobe Life Cycle Designer in your system OR the latest SAP GUI ( This contains by default Adobe Life Cycle Designer)
Let me know if this helps you.
Thanks & Regards,
Anil Kumar Sahni -
She cess not coming in j1iin(TOTAL AMOUNT SECTION)
HI ,
TAXINN PROCEDURE
in j1iin
all duties bed/ecess & also shecess are coming in INVOICE ITEM DETAILS SECTION in columns BED/ECS/TAX1
But in below TOTAL AMOUNT section
BED/ECS ARE COMING
& ONLY SHECESS FIELD IS NOT COMING
1 in excise registeration details i've selected nccd/at1/at2 etc
2 also in classify ctype i've maintained JA!X Shecess
But Still in J1iin shecess field in TOTAL AMOUNT SECTION IS NOT COMING
pL SUGGESTWill explain with Eg:
Say,
You created Tax Codes: A1 - [email protected]% & A2 - CST@2%
B1 - [email protected]% & B4-VAT@4%.
while creating you dont need to enter any value in FTXP, you can save directly w/o values.
Now In OB40 -
select the CST Acct Key- to assign CST Tax Codes along with GL accounts ( here you can either maintain same or diff GL accounts, if you assign Diff GL accounts, that would be easy to track, wrt Tax code wise)
similarly , select the VAT Acct Key - to assign VAT Tax Codes along with GL accounts.
Create Cond rec- VK11 for CST/VAT with "Country/ Plant region / dest point region/ Tax class- Cust/Tax Clas Mat" -
here when you are creating cond rec's- you need to enter "%" manually, system will not pick the "%" automatically, becoz in FTXP , we havent maintained any values. ( if you want the system should pick "%", then maintain the values against to any "Output tax cond type " in FTXP)
This will def'ly solve ur purpose.
reg: ur 3rd query- u just assign ur GL accounts to all ETT for ur Excise Group-will solve
try n revert. -
After billing when I'm firing J1IIN, BED, Ed Cess & High Ed Cess are not coming in J1IIN doc. What can be the reason?
hi,
Check at the the following setting.
1. Go to Logistics General>Tax on Goods movements>India >Basic Settings>Determination of Excise Duty>Maintain Excise Defaults
Here you need to maintain your condition types of your BED, Ecess, SHE cess in A/R BED cond, A/R Ecess cond and A/R AT1 cond. Then try to cerate excise invoice.
2. Go to Logistics General>Tax on Goods movements>India >Basic Settings>Determination of Excise Duty>Condition-Based Excise Determination>Classify Condition Types
Here you need to assign your condition types of BED total Ecess total and SHE cess total if you are using totals condition types. Otherwise you leave it blank.
reg
Deepak -
Excise invice -values not coming
i have create billing & accounting doc is generated -bed /cess are posted.
but when i'm creating excise invoice with ref to billing bed /cess values are not coming in excise invoice
J1IIN
pl SUGGESTHi
Please check in your billing document against all your excise condition types you have duty values.
If billing document does not contain duty values then obviously system will not bring the duty values in your excise invoice (J1IIN).
If you have duty values in your billing document then still excise invoice is not copied to your excise invoice then please check the below customization setting:
MG>Logistics General>Tax on goods movements>India>Basic settings>Determination of excise duty>Maintain Excise defaults:
Here ensure that all your excise condition types are properly maintained for your TAX PROCEDURE.
Example if you are using JEXP-BED, JECS-ECS, JA1X-SeCess condition type in your pricing procedure.
Then check you have maintained as follows:
BED COND (A/R BED)..........JEXP
A/R BED Perc (BED Perc)......JEXP
A/R ECS Cond..........JECS
A/R ECS Perc ..........JECS
A/R AT1 Cond...........JA1X
A/R AT1 Perc............JA1X.
The above setting is required only if you are using percentage condition type. If you are using both percentage and Total condition type. Then it has to be classified as below. JEXT-BED JECP-ECS and JA1Y-SeCess.. These are total condition types.
BED COND (A/R BED)..........JEXT
A/R BED Perc (BED Perc)......JEXP
A/R ECS Cond..........JECP
A/R ECS Perc ..........JECS
A/R AT1 Cond...........JA1Y
A/R AT1 Perc............JA1X.
Regards
MBS -
Value is not coming in excise invoice ..
Hi .all,
We have created one plant . For that we did STO , delivery , PGI , and billing ( commercial and excise ). But in Excise invoice , excise value is not coming ...
Pls Advc ....hi,
pls check whether u have done relevant setting for the new plant code.
SPRO >Log general > Tax on Goods Movements > India > Basic Settings
reg
Deepak -
Header is not coming in alv list display- urgent
hi all,
i am sending my code below....
my requirement is in selection screen i have 4 radio buttons . if i click 1 radio button it will duiisplay data and and its header. report is working fine. my requirement id when i click r_mssng radio button(missing radio button) it is showing data correctsly. here i want to show header as 'Missing details report'.
this is not coming in my report. anybody can suggest me.
i am sending my code below....
report zvra0001ftb13 message-id zv.
Confidential and Proprietary
* Celestica Corporation
* All Rights Reserved
*ABAP Name: ZVRA0001FTB13
*Created by: Srinivasa Chakravarthi
*Created on: 26/03/2003
*SAP Version: 4.6 C
*Description: This report displays details of foreign trades
and EHS based on the deliveries made to the outside
countries.
*Input: Selection Screen Criteria includes country of
origin,Company code, Sales Organisation,
Ship-to-party, Sold-to-paarty, Goods movement date,
Invoice number, Invoice type, Material , Material
Type, Exporter ID, Province of origin.
*Output: ALV output that contains Mode of Transport, Export
HS number, Commodity Description, Quantity, UOM,
Value, Country of Destination, Goods Origin
*Dependency: Nil
*Modification Log:
*CR# Date Coded Transport Description
*====== ======== ========= ============= ===============================
*5147 26/03/2003 Srinivas ED1K922286 New Development
*8700 02/11/2004 H.Arular ED1K938380 To check if entries of Comm
Code(HS code)is less than 8
digits and give a warning
message.
*18684 25/07/2007 MAHEEDHAR Merge the logic from report
ZVRA0001FTB13_ERROR into
report ZVRA0001FTB13 and
added two radio buttons
called missing data and non
missing data, addedc logic
accoriding to the radio
buttons.
*Declaring Tables.
tables: likp, "Delivery document Header
lips, "Delivery Document Item
vbfa, "Sales document Flow
bkpf, "Accounting Document Header
eikp, "Foreign Trade:Export/Import Data
eipo, "Foreign Trade:Export/ Import
"Header data
t618t, "Forein Trade:Mode of Transport
"Description
t604t, "Foreign Trade: Commodity Code/
"Import Code number Description.
mara, "Material master data.
t005, "Countries
t001, "Company Codes
tvko, "Sales Organisations
kna1, "Customer Master
t003, "Document types
t134, "Material types
tvfk,
konv,
vbrk.
constants : c_rep like vbrk-fkart value 'YGFB',
c_for(10) value 'Foreign'.
*Decalre Type pool for ALV
type-pools: slis.
*Type declaration for LIKP.
types: begin of t_data1,
vbeln like likp-vbeln, "Delivery
kunnr like likp-kunnr,
end of t_data1.
*Type declaration for LIPS,VBFA.
types: begin of t_data2,
vbeln like lips-vbeln, "Delivery
posnr like lips-posnr, "Delivery Item
vbelv like vbfa-vbelv, "Preceding SD document
posnv like vbfa-posnv, "Preceding item of SD document
matnr like lips-matnr, "Material Number
meins like lips-meins, "Base unit of measure
lfimg like lips-lfimg, "Actual Quantity Delivered
mtart like mara-mtart,
end of t_data2.
**Type declaration for BKPF.
*types: begin of t_data3,
belnr like bkpf-belnr, "Accounting Documnet number
bukrs like bkpf-bukrs, "Company Code
end of t_data3.
*Type declaration for BKPF.
types: begin of t_data3,
vbeln like vbrk-belnr, " Billing Doc
fkart like vbrk-fkart,
land1 like vbrk-land1,
end of t_data3.
*Type declaration for EIPO.
types: begin of t_data4,
vbeln like lips-vbeln, "Delivery
posnr like lips-posnr, "Delivery Item
matnr like vbrp-matnr,
fkimg like vbrp-fkimg,
meins like vbrp-meins,
verld like eipo-verld, "Country of dispatch for Foreign
"trade
herkl like eipo-herkl, "Country of origin of material
grwrt like eipo-grwrt, "Statistical value for Foreign
" trade
stawn like eipo-stawn, "Commodity code for foreign trade
expvz like eikp-expvz, "Mode of transport for foreign
"trade
end of t_data4.
*Type declaration for T618T.
types: begin of t_data5,
land1 like t618t-land1, "Country key
expvz like t618t-expvz, "Mode of Transport
bezei like t618t-bezei, "Description
end of t_data5.
*Type declaration for T604T.
types: begin of t_data6,
land1 like t604t-land1, "Country key
stawn like t604t-stawn, "Commodity Code
text1 like t604t-text1, "Description
end of t_data6.
*Type declaration for T604T.
types: begin of t_mara,
matnr like mara-matnr,
end of t_mara.
types : begin of rep_val,
vbelv like vbfa-vbelv,
posnv like vbfa-posnv,
vbeln like vbfa-vbeln,
posnn like vbfa-posnn,
uepos like vbap-uepos,
posnr like vbap-posnr,
netwr like vbap-netwr,
end of rep_val.
types : begin of t_price,
vbeln like vbak-vbeln,
posnr like vbap-posnr,
knumv like konv-knumv,
kposn like konv-kposn,
kbetr like konv-kbetr,
kpein like konv-kpein,
end of t_price.
data : t_sord type rep_val occurs 0 with header line.
data : t_dord type rep_val occurs 0 with header line.
data : t_rord type rep_val occurs 0 with header line.
data : t_hord type rep_val occurs 0 with header line.
data : t_ford type rep_val occurs 0 with header line.
data : i_price type t_price occurs 0 with header line.
data : i_price1 type t_price occurs 0 with header line.
data : i_mara type t_mara occurs 0 with header line.
data : i_sort type slis_t_sortinfo_alv.
DATA: t_layout TYPE slis_layout_alv.
*Declaring Selection screen.
selection-screen begin of block b1 with frame title text-101.
select-options:
s_verld for eipo-verld, "Country of Dest.
s_bukrs for bkpf-bukrs, "Company code
s_vkorg for likp-vkorg, "Sales Organisation
s_kunnr for likp-kunnr, "Ship-to-Party
s_kunag for likp-kunag, "Sold-to-party
s_wadat for likp-wadat_ist, "Goods Movement date
s_belnr for vbrk-vbeln, "Invoice number
s_blart for vbrk-fkart. "Invoice type.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-101.
select-options:
s_matnr for mara-matnr, "Material
s_mtart for mara-mtart. "Material Type
selection-screen end of block b2.
selection-screen begin of block b3 with frame title text-101.
parameters:
p_export(30) type c default '1366770724RM' obligatory , "Exporter ID
p_provi(30) type c default 'ONTARIO' obligatory ,
p_sumid(30) type c default 'SUM0704'.
"Province of Origin
selection-screen end of block b3.
selection-screen begin of block b4 with frame title text-104.
parameters:
r_summ radiobutton group zsum,
r_dets radiobutton group zsum,
r_mssng radiobutton group zsum, " maheedhar
R_NMSNG RADIOBUTTON GROUP ZSUM. " MAHEEDHAR
selection-screen skip.
parameter : p_sum as checkbox .
selection-screen end of block b4.
selection-screen begin of block b5 with frame title text-105.
select-options : s_i_kun for likp-kunnr.
selection-screen end of block b5.
*Data Declaration
data: i_fieldcat type slis_t_fieldcat_alv.
data: l_fieldcat type slis_fieldcat_alv .
data: v_lin type i.
data: v_lfstk type c value 'C'.
data: v_vbtyp type c value 'U'.
data: i_data1 type t_data1 occurs 0 with header line.
data : begin of t_T005t occurs 0.
include structure t005t.
data : end of t_t005t.
data: i_data2 type t_data2 occurs 0 with header line.
data: t_delv type t_data2 occurs 0 with header line.
data: t_bild type t_data2 occurs 0 with header line.
data: i_data3 type t_data3 occurs 0 with header line.
data: i_data4 type t_data4 occurs 0 with header line.
data: i_data5 type t_data5 occurs 0 with header line.
data: i_data6 type t_data6 occurs 0 with header line.
*Declare Internal table for ALV output.
data: begin of i_output occurs 0,
belnr like vbrk-vbeln,
posnr like vbrp-posnr,
bezei like t618t-bezei,
stawn like eipo-stawn,
text1 like t604t-text1,
quantity type p decimals 2,
meins like lips-meins,
value type p decimals 2,
verld like t_t005t-landx,
herkl like t_t005t-landx,
strlen, "ED1K938380
end of i_output.
maheedhar-start.
data : i_output1 like i_output occurs 0 with header line,
i_output2 like i_output occurs 0 with header line.
maheedhar-end
data : buff_out like i_output occurs 0 with header line.
data: begin of t_outsum occurs 0,
bezei like t618t-bezei,
stawn like eipo-stawn,
text1 like t604t-text1,
quantity type p decimals 2,
meins like lips-meins,
value type p decimals 2,
verld like t_t005t-landx,
herkl like t_t005t-landx,
end of t_outsum.
data : v_ans.
data : variante LIKE disvariant.
data : v_repid LIKE sy-repid.
data : wa_listheader TYPE slis_listheader.
data : t_listheader TYPE slis_t_listheader.
data : b_text(250).
data: evntS type slis_t_event with header line. " MAHEEDHAR
EVENT AT SELECTION-SCREEN
at selection-screen.
*For Autorisation check
perform authorisation_check.
Validation of Selection screen
perform check_entry.
EVENT START-OF-SELECTION
start-of-selection.
*Get data
perform select_data.
**For calling ALV function modules
MAHEEDHAR - START
if r_mssng eq 'X'.
DELETE I_OUTPUT WHERE BEZEI NE SPACE AND
STAWN NE SPACE AND
HERKL NE SPACE AND
VERLD NE SPACE.
DESCRIBE TABLE I_OUTPUT LINES V_LIN.
IF V_LIN > 0.
PERFORM DISPLAY_OUTPUT.
ELSE.
MESSAGE E000 WITH TEXT-130.
ENDIF.
elseif R_SUMM eq 'X' OR R_DETS EQ 'X'. "ENDIF. " MAHEEDHAR
MAHEEDHAR-END
describe table i_output lines v_lin.
if v_lin > 0.
buff_out[] = i_output[].
Begin of ED1K938380
delete buff_out where stawn ne space or "ED1K938380
verld eq space or
herkl eq space.
delete buff_out where strlen ne 'X' or
verld eq space or
herkl eq space.
End of ED1K938380
describe table buff_out lines v_lin.
Lines with no commodity code exists.
if v_lin gt 0.
concatenate text-902 text-903 into b_text.
concatenate text-906 text-907 into b_text. "ED1K938380
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = Text-901
TEXT_QUESTION = b_text
TEXT_BUTTON_1 = 'Yes'
TEXT_BUTTON_2 = 'No'
DEFAULT_BUTTON = '2'
IMPORTING
ANSWER = v_ans.
if v_ans eq '1'.
perform display_output.
endif.
else.
perform display_output.
endif.
else. " MAHEEDHAR
message e000 with text-130.
endif.
MAHEEDHAR-START
*"-- If non missing details radiobutton is selected
elseif r_nmsng = 'X'.
*"-- move data from i_output to i_output1.
i_output1[] = i_output[].
sort i_output by belnr.
sort i_output1 by belnr.
*"-- to get missing data
delete i_output1 where bezei ne space and
stawn ne space and
herkl ne space and
verld ne space.
loop at i_output.
*"-- compare two int tables with respective document number
read table i_output1 with key belnr = i_output-belnr.
if sy-subrc ne 0.
move-corresponding i_output to i_output2.
append i_output2.
clear i_output2.
endif.
endloop.
describe table i_output2 lines v_lin.
if v_lin gt 0.
perform display_output.
else.
message e000 with text-130.
endif.
MAHEEDHAR-END.
ENDIF. " MAHEEDHAR
FORM SELECT_DATA *
form select_data.
Data:l_strlen type i. "ED1K938380
*Get details from LIKP.
if s_i_kun[] is initial.
select likpvbeln likpkunnr
into corresponding fields of table i_data1
from likp
inner join vbuk on likpvbeln = vbukvbeln
where
likp~vkorg in s_vkorg and
likp~kunnr in s_kunnr and
likp~kunag in s_kunag and
likp~wadat_ist in s_wadat and
vbuk~wbstk = 'C' .
else.
select likpvbeln likpkunnr
into corresponding fields of table i_data1
from likp
inner join vbuk on likpvbeln = vbukvbeln
where
( ( likp~vkorg in s_vkorg and
likp~kunnr in s_kunnr and
likp~kunag in s_kunag and
likp~wadat_ist in s_wadat and
vbuk~wbstk = 'C' )
or
likp~kunnr in s_i_kun and
likp~wadat_ist in s_wadat and
vbuk~wbstk = 'C' ) .
endif.
if sy-subrc ne 0.
message e000 with text-200.
endif.
*Get details from table LIPS
select lips~vbeln
lips~posnr
vbfa~vbeln
vbfa~posnn
lips~matnr
lips~meins
lips~lfimg
mara~mtart
from lips
inner join vbfa on vbfavbelv = lipsvbeln
and vbfaposnv = lipsposnr
inner join mara on maramatnr = lipsmatnr
into table i_data2
for all entries in i_data1
where
lips~vbeln = i_data1-vbeln and
lips~matnr in s_matnr and
vbfa~vbeln in s_belnr and
mara~mtart in s_mtart and
vbfa~vbtyp_n = 'U'.
if sy-subrc ne 0.
message e000 with text-201.
endif.
t_delv[] = i_data2[].
t_bild[] = i_data2[].
sort t_delv by vbeln.
delete adjacent duplicates from t_delv comparing vbeln.
sort t_bild by vbeln ascending vbelv descending.
delete adjacent duplicates from t_bild comparing vbeln.
*Get details of Accounting document number
select vbeln fkart land1 from vbrk
into table i_data3
for all entries in t_bild
where vbeln = t_bild-vbelv and
bukrs in s_bukrs and
fkart in s_blart and
vkorg in s_vkorg and " MAHEEDHAR
land1 in s_verld. " MAHEEDHAR
sort i_data3.
*Get details from EIPO.
select vbrp~vbeln
vbrp~posnr
vbrp~matnr
vbrp~fkimg
vbrp~meins
eipo~verld
eipo~herkl
eipo~grwrt
eipo~stawn
eikp~expvz
from eikp
inner join vbrp on vbrp~vbeln = eikp~refnr
inner join eipo on eikp~exnum = eipo~exnum
and eipo~expos = vbrp~posnr
into table i_data4 for all entries in i_data3
where vbrp~vbeln = i_data3-vbeln.
eipo~verld in s_verld.
if sy-subrc ne 0.
message e000 with text-201.
endif.
IF R_MSSNG NE 'X' or r_nmsng = 'X'. " MAHEEDHAR
perform get_price.
ENDIF. " MAHEEDHAR
Get details from T618T.
select land1
expvz
bezei
from t618t
into table i_data5
for all entries in i_data4
where
land1 = 'CA' and " Getting for Canada only
expvz = i_data4-expvz and
spras = sy-langu.
select matnr from mara into table i_mara where matnr in s_matnr
and mtart in s_mtart.
Get details from T604T.
select land1
stawn
text1
from t604t
into table i_data6
for all entries in i_data4
where
land1 = i_data4-VERLD and
stawn = i_data4-stawn and
spras = sy-langu.
select * from T005t into table t_T005t where spras = sy-langu.
loop at i_data3.
loop at i_data4 where vbeln eq i_data3-vbeln.
clear : i_data1, i_data2.
read table i_data2 with key vbelv = i_data4-vbeln
posnv = i_data4-posnr.
read table i_data1 with key vbeln = i_data2-vbeln.
if not s_i_kun[] is initial.
check ( ( i_data1-kunnr in s_i_kun ) or
( i_data3-land1 in s_verld ) ).
else.
check i_data3-land1 in s_verld .
endif.
read table i_mara with key matnr = i_data4-matnr.
if sy-subrc eq 0.
read table i_data5 with key expvz = i_data4-expvz .
land1 = i_data3-land1.
read table i_data6 with key stawn = i_data4-stawn
land1 = i_data4-VERLD.
move i_data4-vbeln to i_output-belnr.
move i_data4-posnr to i_output-posnr.
move i_data5-bezei to i_output-bezei.
move i_data6-text1 to i_output-text1.
Begin of ED1K938380.
l_strlen = strlen( i_data4-stawn ).
if l_strlen < 8.
move 'X' to i_output-strlen.
endif.
End of ED1K938380.
move i_data4-stawn to i_output-stawn.
move i_data4-meins to i_output-meins.
read table t_T005t with key land1 = i_data3-land1.
move t_t005t-landx to i_output-verld.
if p_sum eq space.
if i_data4-herkl ne 'CA'.
i_output-herkl = c_for.
else.
read table t_T005t with key land1 = i_data4-herkl.
move t_t005t-landx to i_output-herkl.
endif.
else.
read table t_T005t with key land1 = i_data4-herkl.
move t_t005t-landx to i_output-herkl.
endif.
move i_data4-fkimg to i_output-quantity.
if i_data3-fkart eq c_rep.
read table t_dord with key vbeln = i_data4-vbeln
posnn = i_data4-posnr.
if sy-subrc eq 0.
read table t_sord with key vbeln = t_dord-vbelv
posnn = t_dord-posnv.
if sy-subrc eq 0.
read table t_hord with key vbeln = t_sord-vbelv
posnr = t_sord-posnv.
if sy-subrc eq 0.
read table t_ford with key vbeln = t_hord-vbeln
posnr = t_hord-uepos.
if sy-subrc eq 0.
read table i_price with key vbeln = t_ford-vbeln
posnr = t_ford-posnr.
if sy-subrc eq 0.
read table i_price1 with key knumv = i_price-knumv
kposn = t_ford-posnr.
if sy-subrc eq 0.
if i_price1-kpein ne 0.
i_output-value =
( i_price1-kbetr / i_price1-kpein ) *
i_data4-fkimg.
endif.
endif.
endif.
endif.
endif.
endif.
endif.
else.
move i_data4-grwrt to i_output-value.
endif.
append i_output.
clear i_output.
clear : i_data5, i_data6.
endif.
endloop.
endloop.
sort i_output by verld herkl bezei stawn.
endform.
FORM DISPLAY_OUTPUT *
This form is to create the ALV output
form display_output.
data: xevents type slis_t_event,
ls_event type slis_alv_event,
slis_ev_top_of_page type slis_formname value 'TOP_OF_PAGE',
slis_ev_end_of_list type slis_formname value 'END_OF_LIST'.
*Call Function 'REUSE_ALV_EVENTS' for top of page
call function 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = xevents
EXCEPTIONS
list_type_wrong = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table xevents with key name = slis_ev_top_of_page
into ls_event.
if sy-subrc = 0.
move slis_ev_top_of_page to ls_event-form.
append ls_event to xevents.
endif.
read table xevents with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move slis_ev_end_of_list to ls_event-form.
append ls_event to xevents.
endif.
if r_dets ne space.
*Call Function 'REUSE_ALV_FIELD_CATALOG_MERGE' for position fixing in
*the output.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = 'ZVRA0001FTB13'
i_internal_tabname = 'I_OUTPUT'
i_inclname = 'ZVRA0001FTB13'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
i_bypassing_buffer = 'X'
i_buffer_active = ' '
changing
ct_fieldcat = i_fieldcat
exceptions
inconsistent_interface = 1
program_error = 2
others = 3.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at i_fieldcat into l_fieldcat.
l_fieldcat-key = ' '.
case l_fieldcat-fieldname.
when 'BELNR'.
l_fieldcat-seltext_m = text-912.
l_fieldcat-seltext_l = text-912.
l_fieldcat-reptext_ddic = text-912.
l_fieldcat-col_pos = '1'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '12'..
when 'POSNR'.
l_fieldcat-seltext_m = text-913.
l_fieldcat-seltext_l = text-913.
l_fieldcat-reptext_ddic = text-913.
l_fieldcat-col_pos = '2'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '6'.
when 'BEZEI'.
l_fieldcat-seltext_m = text-911.
l_fieldcat-seltext_l = text-911.
l_fieldcat-reptext_ddic = text-911.
l_fieldcat-col_pos = '3'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '15'..
when 'STAWN'.
l_fieldcat-seltext_m = text-111.
l_fieldcat-seltext_l = text-111.
l_fieldcat-reptext_ddic = text-111.
l_fieldcat-col_pos = '4'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '30'.
when 'TEXT1'.
l_fieldcat-seltext_m = text-112.
l_fieldcat-seltext_l = text-112.
l_fieldcat-outputlen = '40'.
l_fieldcat-col_pos = '5'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-112.
when 'QUANTITY'.
l_fieldcat-outputlen = '18'.
l_fieldcat-reptext_ddic = text-113.
l_fieldcat-seltext_m = text-113.
l_fieldcat-col_pos = '6'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-113.
when 'MEINS'.
l_fieldcat-outputlen = '8'.
l_fieldcat-reptext_ddic = text-114.
l_fieldcat-seltext_m = text-114.
l_fieldcat-col_pos = '7'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-114.
when 'VALUE'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-115.
l_fieldcat-seltext_l = text-115.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-115.
when 'VERLD'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-116.
l_fieldcat-seltext_l = text-116.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-116.
when 'HERKL'.
l_fieldcat-seltext_m = text-117.
l_fieldcat-seltext_l = text-117.
l_fieldcat-outputlen = '30'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-117.
when others.
l_fieldcat-no_out = 'X'.
endcase.
modify i_fieldcat from l_fieldcat.
endloop.
Call Function 'REUSE_ALV_LIST_DISPLAY' for dispaly of data in ALV.
call function 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZVRA0001FTB13'
it_fieldcat = i_fieldcat
it_events = xevents
is_layout = t_layout
i_save = 'A'
i_bypassing_buffer = 'X'
i_buffer_active = ' '
TABLES
t_outtab = i_output
EXCEPTIONS
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
else. " MAHEEDHAR
ELSEIF R_SUMM EQ 'X'. " MAHEEDHAR
sort i_output by verld herkl stawn bezei.
loop at i_output.
move-corresponding i_output to t_outsum.
collect t_outsum.
endloop.
*Call Function 'REUSE_ALV_FIELD_CATALOG_MERGE' for position fixing in
*the output.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZVRA0001FTB13'
i_internal_tabname = 'T_OUTSUM'
i_inclname = 'ZVRA0001FTB13'
i_bypassing_buffer = 'X'
i_buffer_active = ' '
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
others = 3.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at i_fieldcat into l_fieldcat.
l_fieldcat-key = ' '.
case l_fieldcat-fieldname.
when 'BEZEI'.
l_fieldcat-seltext_m = text-911.
l_fieldcat-seltext_l = text-911.
l_fieldcat-reptext_ddic = text-911.
l_fieldcat-col_pos = '1'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '15'..
when 'STAWN'.
l_fieldcat-seltext_m = text-111.
l_fieldcat-seltext_l = text-111.
l_fieldcat-reptext_ddic = text-111.
l_fieldcat-col_pos = '2'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '30'.
when 'TEXT1'.
l_fieldcat-seltext_m = text-112.
l_fieldcat-seltext_l = text-112.
l_fieldcat-outputlen = '40'.
l_fieldcat-col_pos = '3'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-112.
when 'QUANTITY'.
l_fieldcat-outputlen = '18'.
l_fieldcat-reptext_ddic = text-113.
l_fieldcat-seltext_m = text-113.
l_fieldcat-col_pos = '4'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-113.
when 'MEINS'.
l_fieldcat-outputlen = '8'.
l_fieldcat-reptext_ddic = text-114.
l_fieldcat-seltext_m = text-114.
l_fieldcat-col_pos = '5'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-114.
when 'VALUE'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-115.
l_fieldcat-seltext_l = text-115.
l_fieldcat-col_pos = '6'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-115.
when 'VERLD'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-116.
l_fieldcat-seltext_l = text-116.
l_fieldcat-col_pos = '7'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-116.
when 'HERKL'.
l_fieldcat-seltext_m = text-117.
l_fieldcat-seltext_l = text-117.
l_fieldcat-outputlen = '30'.
l_fieldcat-col_pos = '8'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-117.
when others.
l_fieldcat-no_out = 'X'.
endcase.
modify i_fieldcat from l_fieldcat.
endloop.
Call Function 'REUSE_ALV_LIST_DISPLAY' for dispaly of data in ALV.
call function 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZVRA0001FTB13'
it_fieldcat = i_fieldcat
it_events = xevents
i_save = 'A'
is_layout = t_layout
i_default = 'X'
is_variant = variante
i_bypassing_buffer = 'X'
i_buffer_active = ' '
TABLES
t_outtab = t_outsum
EXCEPTIONS
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
MAHEEDHAR-START.
*"-- if detail summary checkbox is selected
elseIF R_MSSNG = 'X'.
PERFORM PREPARE_HEADER.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = 'ZVRA0001FTB13'
i_internal_tabname = 'I_OUTPUT'
i_inclname = 'ZVRA0001FTB13'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
i_bypassing_buffer = 'X'
i_buffer_active = ' '
changing
ct_fieldcat = i_fieldcat
exceptions
inconsistent_interface = 1
program_error = 2
hi,
*& Report ZALV_FIELD_GRID1
REPORT ZALV_FIELD_GRID1
NO STANDARD PAGE HEADING.
TABLES MARA.
type-pools :slis.
TYPES : BEGIN OF TMARA ,
MATNR LIKE MARA-MATNR,
MEINS LIKE MARA-MEINS,
ERSDA LIKE MARA-ERSDA,
color(4) type c,
SEL type c,
LIGHT TYPE C,
END OF TMARA.
TYPES: BEGIN OF TMAKT,
MATNR LIKE MAKT-MATNR,
MAKTX LIKE MAKT-MAKTX,
MAKTG LIKE MAKT-MAKTG,
SEL TYPE C,
COLOR(4),
END OF TMAKT.
DATA: ITAB TYPE TMARA OCCURS 0 WITH HEADER LINE,
ITAB1 TYPE TMAKT OCCURS 0 WITH HEADER LINE,
wa_fieldcat type slis_fieldcat_alv,
fieldcat type slis_fieldcat_alv occurs 0,
i_layout type slis_layout_alv,
WA_LISTHEADER TYPE SLIS_LISTHEADER ,
i_LISTHEADER TYPE SLIS_LISTHEADER OCCURS 0,
V_EVENTS TYPE SLIS_T_EVENT ,
WA_EVENT TYPE SLIS_ALV_EVENT,
I_TITLE_MARA TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED',
I_TITLE_MAKT TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED',
SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE,
PRINT_CONT type slis_print_alv.
SELECTION SCREE
selection-screen begin of block screen1 with frame title TEXT-001.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN COMMENT /32(35) COMM1.
SELECTION-SCREEN ULINE /27(35).
SELECTION-SCREEN SKIP.
SELECT-OPTIONS MATNR FOR MARA-MATNR.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN COMMENT /30(50) COMM2.
SELECTION-SCREEN ULINE /27(40).
SELECTION-SCREEN SKIP.
SELECT-OPTIONS ERSDA FOR MARA-ERSDA.
SELECTION-SCREEN SKIP.
selection-screen end of block screen1.
INITIALIZATION
INITIALIZATION.
MATNR-low = '23'.
MATNR-high = '1000'.
MATNR-option = 'BT'.
MATNR-sign = 'I'.
APPEND MATNR.
ERSDA-low = '20030124'.
ERSDA-high = '20050302' .
APPEND ERSDA.
PERFORM FILLFIELD.
PERFORM FILLLAYOUT.
PERFORM build_print_params.
PERFORM FILL_SORT.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
comm1 ='SELECT MATERIAL NUMBER RANGE'.
comm2 ='SELECT MATERIAL CREATION DATE'.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM READDATA.
PERFORM POPDATA.
*& Form READDATA
text
FORM READDATA .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = MATNR-LOW
IMPORTING
OUTPUT = MATNR-LOW.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = MATNR-HIGH
IMPORTING
OUTPUT = MATNR-HIGH.
SELECT MATNR
ERSDA
MEINS
FROM MARA
INTO CORRESPONDING FIELDS OF
TABLE ITAB
WHERE MATNR IN MATNR AND ERSDA IN ERSDA.
LOOP AT ITAB.
data id_color type i VALUE 1.
data id_colors(2) type c.
IF ITAB-MATNR < '000000000000000100'.
ITAB-LIGHT = '1'.
ELSEIF ITAB-MATNR < '000000000000000150' AND ITAB-MATNR >
'000000000000000100' .
ITAB-LIGHT = '2'.
ELSE.
ITAB-LIGHT = '3'.
ENDIF.
id_color = id_color + 1.
if id_color > 7.
id_color = 1.
endif.
id_colors = id_color.
concatenate 'C' id_colors '10' into itab-color.
modify itab.
CLEAR ITAB.
endloop.
ENDFORM. " READDATA
Form FILLFIELD
FORM FILLFIELD .
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-KEY = 'X'.
WA_FIELDCAT-COL_POS = '1'.
WA_FIELDCAT-outputlen = 20.
WA_FIELDCAT-HOTSPOT = 'X'.
wa_fieldcat-seltext_m = 'MATERIAL NUMBER'.
*WA_FIELDCAT-EMPHASIZE = 'C210'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-COL_POS = '2'.
*WA_FIELDCAT-EMPHASIZE = 'C510'.
WA_FIELDCAT-outputlen = 10.
wa_fieldcat-seltext_m = 'UNIT'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'ERSDA'.
WA_FIELDCAT-COL_POS = '3'.
WA_FIELDCAT-outputlen = 15.
*WA_FIELDCAT-EDIT_MASK = 'DD.MM.YYYY'.
*WA_FIELDCAT-EMPHASIZE = 'C710'.
wa_fieldcat-seltext_m = 'CREAT DATE'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
ENDFORM. "FILLFIELD
Setup print parameters
form build_print_params.
PRINT_CONT-reserve_lines = '3'. "Lines reserved for footer
PRINT_CONT-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
Form POPDATA
FORM POPDATA .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER-COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOPPAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_MARA
I_GRID_SETTINGS =
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = SORT[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = V_EVENTS
IT_EVENT_EXIT =
IS_PRINT = PRINT_CONT
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
ENDFORM. " POPDATA
Form TOPPAGE
FORM TOPPAGE.
REFRESH I_LISTHEADER.
DATA: ld_lines type i,
ld_linesc(10) type c,
I_DATE(10) TYPE C,
I_INFO LIKE WA_LISTHEADER-INFO.
WA_LISTHEADER-TYP = 'H'.
WA_LISTHEADER-INFO = 'MATERIAL DETAIL'.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
WA_LISTHEADER-TYP = 'S'.
WA_LISTHEADER-KEY = 'DATE :'.
CONCATENATE SY-DATUM+6(2) '.'
SY-DATUM+4(2) '.'
SY-DATUM(4) INTO I_DATE.
WA_LISTHEADER-INFO = I_datE.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
describe table ITAB lines ld_lines.
ld_linesc = ld_lines.
concatenate 'TOTAL NUMBER OF RECORD SELECTED: ' ld_linesc
into I_INFO separated by space.
WA_LISTHEADER-TYP = 'A'.
WA_LISTHEADER-INFO = I_INFO.
append WA_LISTHEADER to I_LISTHEADER.
clear: WA_LISTHEADER , I_INFO.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_LISTHEADER
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "TOPPAGE
Form FILLLAYOUT
FORM FILLLAYOUT .
i_layout-zebra = 'X'.
i_layout-info_fieldname = 'COLOR'.
i_layout-box_fieldname = 'SEL'.
I_LAYOUT-lights_fieldname = 'LIGHT'.
I_LAYOUT-EDIT ='X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-window_titlebar = 'EXAMPLE FOR ALV GRID'.
I_LAYOUT-no_totalline = 'X'.
ENDFORM. "FILLLAYOUT
Form FILL_SORT
FORM FILL_SORT .
SORT-DOWN = 'X'.
SORT-SPOS = 1.
SORT-FIELDNAME = 'MATNR'.
SORT-tabname = 'MARA'.
APPEND SORT.
ENDFORM. " FILL_SORT
Form EVENT_CALL
FORM EVENT_CALL .
DATA: I_EVENT LIKE V_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " EVENT_CALL
Form POPULATE_EVENT
FORM POPULATE_EVENT .
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
READ TABLE V_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO WA_EVENT.
IF SY-SUBRC = 0.
move 'END_OF_PAGE' to WA_EVENT-FORM.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
endif.
ENDIF.
ENDFORM. "POPULATE_EVENT
FORM END_OF_PAGE.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
ENDFORM.
*& Form USER_COMMAND
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
CASE RS_SELFIELD-FIELDNAME.
when 'MATNR'.
read table itab with key matnr = RS_SELFIELD-VALUE.
if sy-subrc = 0.
PERFORM DATA_RETRIEVAL_MAKT USING RS_SELFIELD-VALUE.
PERFORM BUILD_FIELDCATLOG_MAKT.
PERFORM FILLLAYOUT_MAKT.
PERFORM DISPLAY_ALV_MAKT.
CLEAR RS_SELFIELD.
ENDIF.
ENDCASE.
ENDCASE.
ENDFORM. "user_command
Form DATA_RETRIEVAL_MAKT
FORM DATA_RETRIEVAL_MAKT USING TMATNR .
SELECT MATNR
MAKTX
MAKTG
UP TO 100 ROWS
FROM MAKT
INTO TABLE ITAB1
WHERE SPRAS = 'EN' AND MATNR = TMATNR.
LOOP AT ITAB1.
data id_color type i VALUE 1.
data id_colors(2) type c.
id_color = id_color + 1.
if id_color > 7.
id_color = 1.
endif.
id_colors = id_color.
concatenate 'C' id_colors '10' into itab1-color.
modify itab1.
CLEAR ITAB1.
ENDLOOP.
ENDFORM. "DATA_RETRIEVAL_MAKT
Form FILLLAYOUT_MAKT
FORM FILLLAYOUT_MAKT .
CLEAR I_LAYOUT.
i_layout-zebra = 'X'.
i_layout-info_fieldname = 'COLOR'.
i_layout-box_fieldname = 'SEL'.
I_LAYOUT-EDIT ='X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-window_titlebar = 'EXAMPLE FOR ALV GRID'.
ENDFORM. " LAYOUT_MAKT
Form BUILD_FIELDCATLOG_MAKT
FORM BUILD_FIELDCATLOG_MAKT .
REFRESH FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-KEY = 'X'.
WA_FIELDCAT-COL_POS = '1'.
*WA_FIELDCAT-EDIT_MASK = 'DD.MM.YYYY'.
WA_FIELDCAT-EMPHASIZE = 'C510'.
wa_fieldcat-seltext_m = 'MATERIAL NUMBER'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MAKTX'.
WA_FIELDCAT-COL_POS = '2'.
WA_FIELDCAT-EMPHASIZE = 'C710'.
wa_fieldcat-seltext_m = 'MATERIAL DESCRIPTION'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MAKTG'.
WA_FIELDCAT-COL_POS = '3'.
WA_FIELDCAT-EMPHASIZE = 'C210'.
wa_fieldcat-seltext_m = 'MATERIAL DESCRIPTION'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
ENDFORM. " BUILD_FIELDCATLOG_MAKT
Form DISPLAY_ALV_MAKT
FORM TOP-OF-PAGE.
REFRESH I_LISTHEADER.
DATA: ld_lines type i,
ld_linesc(10) type c,
I_DATE(10) TYPE C,
I_INFO LIKE WA_LISTHEADER-INFO.
WA_LISTHEADER-TYP = 'H'.
WA_LISTHEADER-INFO = 'MATERIAL DESCRIPTION FOR SELECTED NUMBER'.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
WA_LISTHEADER-TYP = 'S'.
WA_LISTHEADER-KEY = 'DATE :'.
CONCATENATE SY-DATUM+6(2) '.'
SY-DATUM+4(2) '.'
SY-DATUM(4) INTO I_DATE.
WA_LISTHEADER-INFO = I_datE.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
describe table ITAB1 lines ld_lines.
ld_linesc = ld_lines.
concatenate 'TOTAL NUMBER OF RECORD SELECTED: ' ld_linesc
into I_INFO separated by space.
WA_LISTHEADER-TYP = 'A'.
WA_LISTHEADER-INFO = I_INFO.
append WA_LISTHEADER to I_LISTHEADER.
clear: WA_LISTHEADER , I_INFO.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_LISTHEADER
I_LOGO = 'ENJOYSAP_LOGO'.
I_END_OF_LIST_GRID =
I_ALV_FORM =
ENDFORM. "TOP-OF-PAGE
*& Form DISPLAY_ALV_MAKT
text
FORM DISPLAY_ALV_MAKT .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
I_GRID_TITLE = I_TITLE_MAKT
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = fieldcat
TABLES
T_OUTTAB = ITAB1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_MAKT
Regards
Ashok kumar -
when i am trying to capture excise invoice for import PO the BED AED and HECS is not coming is it due to any patch or something else BCOz the same is working fine in development client but not working in quality client
Hello
Goto SE09 and check whether all the CIN customizing requests have been transported from DEV to QAS.
Regards -
During Excise invoice capturing, BED and other duties not coming
Hi experts,
During Excise capturing with j1iex_c t-code for scheduling w.r.t. scheduling agreement, BED and other excise duties are not coming automatically. But in case of other scheduling agreements all the duties are coming l...what could be the reason for the same...need ur expert comments...
Thanks in advance..
With best Regards,
Bharat BHi Sudhir,
Thanks for your quick reply. I have checked both the settings..its already maintained..please suggest me more inputs..
thanks in advance..
regards,
Bharat B -
Cancelling the GR the excise item tab is not coming after flagging the OK
Hi SAP Experts,
there is one subcon PO for excisable material for depot, after its GR it have been posted from j1iex.
Now there is a requirement to cancel the excise posting for which first of all its GRN should be cancel.
But while cancelling the GR the excise item tab is not coming after flagging the OK.
This problem is there only for the depot, for other plant Im able to cancel for subcon PO.
Thanks & Regards,
Anisha Sinhastill not cleared
-
Base value and BED not coming in Excise Irem in MIGO
Dear all,
I created PO base value and basic Excise duty is calculating it is showing in tax pop up menu
but it is not coming in Goods receipt (MIGO) in Excise Item Tab
Base Value and BED
Please help
ManjunathHi ,
I maintained Excise Default
Account payable BED condition type -- JM01
BED Percentage condition -
16 ( Number )
It is upgraded 4.7 t0 Ecc 6
BED Percentage condition it is given as 16 number but if i changed this, In PO tax Popup menu is not coming
I change ---JMX1 it not coming in MIGO also
I cant understand what is this 16 number i want to known it is program or had code ......
J1ID as different percentage
Manjunath -
Excise rate are not coming in ARE1
Hi
I have a problem here in ARE1 all figures are coming and thet are correct but excise rate fro BED,ECS and HSces not coming
Regards
sandeepsolved this issue muself
-
Excise duty are not coming in utilization
Dear All,
Some excise invoices are not coming in utilization (J2IUN), what possible reaosn is there and how I can
resolve this. Plz advice.
regards,
SP Shukla.Hi
In J1IS transaction code first give all details like
1) Ref document type
2) Doc Number
3) Doc Year
4)Series Group
5) Excise Group
6) vendor or customer press enter
then click on insert line (shift +F6) fill all the fields now .
Thanx -
Total Excise Duty not coming in MIGO
Hi All,
For a PO in MIGO am getting Total Excise tab in header level(in Excise invoice tab) but the same is not coming in item details.Please let me know what is wrong?
Thanks,
Rakesh.Hai,
In std sap u will not get the total excise in either header r item, in ur client it might have delveloped.
Maybe you are looking for
-
How do I "Add to Library" when iPhoto won't recognise selected photos?
A few months ago I was unable to import photos from the same Canon camera I've always used with iPhoto. Despite a number of steps taken, the problem has not resolved. As I was getting a few erratic problems I decided to rebuild the computer (back up,
-
Not able to use @section and Sort within a group in RTF Template
When i try to use sort with for-each-group@section in my template, the Output Post processor is throwing the following exception Caused by: oracle.xdo.parser.v2.XSLException: <Line 31, Column 84>: XML-22047: (Error) Invalid instantiation of 'xsl:sort
-
FM or BAPI to test HU creation using Packing instruction in test mode
Hi SAP Gurus, Can you guys help me in finding out an appropriate FM or BAPI thourgh which systme will create HU using Packaging instructions. I have Packaging instructions are setup as master record and Determination proceudre is also created. Just w
-
Older Cinema Display to New MacBook
I bought a 20 inch LCD Cinema Display (A1081) from a friend. I have a brand new MacBook Pro (15" screen) that I want to connect it to. However, the cords from the monitor do not match up to the ports I have on the MacBook. The monitor comes with a DV
-
Error in running encryption/decryption using DES in Websphere Dev't Client
Hello! I have a code used to encrypt / decrypt a string (password). I have already tested it using Netbeans and it is working. But when I tried to add the java code to an existing web project using Websphere Development Client,, javax.crypto.* is not