Excise Part-2 is not getting updated during the MIGO

Dear Experts,
When I am doing GR (MIGO), I am selecting the Excise posting transaction in "Excise" header tab as "Capture & Post Excise Invoice".
But, here after posting the GR, only Part-1 is getting updated. Part-2 is not updating. Moreover, if I try to post the same vendor excise invoice in J1IEX, it is giving the error as " Part-1 not yet posted even though Part-1 is updated. Can any body suggest what is the root cause for the same?
One more thing is, once I select "Only Capture Excise Invoice" during GR, in the normal process Part-1 is updating and I'll be able to post the Part-2 in J1IEX. There is no issue. But, I can't be able to post the Part-2 during GR.
Note: I am receiving the goods against with the STO. And, we are paying the customs against with the STO. After paying the Customs Invoice, we are receiving the goods into our manufacturing Plant from logical plant.
Thanks in advance for your action!!!!
Regards,
Satya
Dear

Hi Ashok,
I went through the above note. It explains the causes that why the posting is not happening in J1IEX.
And, as per the solution that is in that note, if we change the status of that excise invoice from 'P' to Blank in the table J_1IEXCHDR, then Vendor excise invoice will be cancelling.
So, I guess this can't resolve my issue. Because, my issue is if I select "Only Capture Excise", the Part-1 is updating in MIGO and I am able to post the Part-2 in J1IEX. But, If I select "Capture & Post Ecxise Invoice" in MIGO, then only Part-1 is updating and even I am not able to post the Part-2 in J1IEX also as the status of the Excise Invoice is "Posted".
And, this is happening frequently during MIGO while selecting "Capture & Post Excise". So, I guess the Function Module / BADI which updates the J_1IPART2 is not getting triggered during MIGO. Once it triggers in MIGO, then Part-2 will be posting in GR itself.
Could you please let me know the standard FM / BADI which updates the Excise Invoice Part-2 (J_1IPART2). So that I'll check with my ABAPer whether it is triggering or not during the MIGO.
Thanks,
Satya

Similar Messages

  • Batch Classification data not getting updated during the GR of the PO

    Dear Gurus,
    While doing the GR of the Purchase order the classification data for the batch should get updated .However we can see those data in MSC2N (Change batch) but not in MSC3N (Display Batch) .While consultuing with SAP we found that the data in MSC3N is directly picked in the AUSP table but the data in MSC2 N  reads the information directly from the
    reference table field (MCH1-LWEDT & MCH1-LIFNR .My Qusetion is why this the AUSP entries are not getting updated during the GR itself.
    Sumit Mohan

    Hi Sumit,
    I am not sure about your question, but if you want to populate the classification data during goods receipt then you need to maintain characteristics values in material master for classification tab under class type batch i.e. 022. After then it will apper during goods receipt for characteristics value for batch.
    Regards,
    Bhagat

  • The currency is not getting updated in the table VBAP

    Hi ,
    The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
    Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
    Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
    The net Value has data in it .
    The system is ECC 5.0
    Regards,
    Senthil

    Dear Senthil,
    Please apply the following notes (if they apply to your support pack level) and retest:
    1460621 VBAP-WAERK is deleted after the sold-to party is changed
    1426441 VBAP-WAERK deleted for subitems
    1493998 VBAP-WAERK deleted for subitems
    This should resolve the issue. I hope this helps.
    Best regards,
    Ian Kehoe

  • Overhead is not getting updated in the production order

    Hi all,
    I am running actual overhead calculation with KGI2.
    But the overheads are not getting updated in the order.
    Order contains relevant overhead key also.
    What could be the possible causes?
    SmanS

    Arun/ Suleman,
    Thank you for your reply.
    I have maintained the % in the costing sheet against the 'Overhead rate' but I didn't get the secondary cost element.
    Request you to elaborate it further & explain me how to maintain the same.
    Also I will be thankful to you, if you could explain me the exact process of loading the overhead on the order i.e. how it loads the overhead form the cost center to order? What happens to the total cost which was lying on the cost center etc, in details.
    Mean while I had maintained the required values in costing sheet in KZS2.
    Maintained the % against material overhead rate as well as manufacturing overhead rate.
    Maintained the credit values for the overhead rate.
    Maintained the calculation base values also.
    Now while overhead calculation with KGI2, I am getting two errors as follows,
    1. S:K5:162 E02 20090831
    2. Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND for object
    I can not figure out the reason.
    SmanS
    Edited by: SAP PP Consultant on Aug 10, 2009 6:47 AM

  • TDS amount not getting updated in the table under the field QBSHB

    Dear Friends,
    The TDS amount entered while booking the vendor invoices through MIRO T-cde, is not getting updated in the table BSEG under the field QBSHB. 
    Kindly let me know the reason for the same and guide me to correct it
    TIA.
    Regards,
    Vincent

    HI Vincent,
    Bseg-QBSHB field is relavent for classic WT.
    I hope you are using the EWT.
    Hence if you post a document through MIRO it will not update
    (but if you post document FB60 it will update but wrongly).
    Reason is Miro document is posted through interface.
    Hence SAP is suggested to not refer the Bseg-QBSHB and etc., fields.
    refer only with_item table.
    Please refer the below replay from SAP
       Please refer the below note .363309
    Please review attached note 363309 for detailed explanation
    BSEG-QBSHB is designed to fill for the classic withholding tax. And
    extended withholding tax information is stored exclusive in table
    WITH_ITEM.
    You can check in table BSEG for the fields and will find that system
    do NOT update field BSEG-QBSHB.
    In your line layout,you define a field BSEG-QBSHB. But actully the field
    of vendor/customer line item is filled with zero from FI. Thus,it shows
    zero in line item display.
    And as note 363309 says,
    "Remove the field which contains the withholding tax information
    from your display variant.
    If you want to display the withholding tax information, double-click on
    the document number and subsequently choose 'Withholding tax' button."
    (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) field is not relavent for
    Extended withholding tax and not suppose to use in report FBL1N.
    It basically does not make any sense to use the withholding tax fields
    of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the
    activated extended withholding tax.
    regards
    Madhu M
    Edited by: M Madhu on Jan 31, 2011 1:19 PM

  • [svn:fx-trunk] 11546: fix so the textLayout. swc does not get modified during the build process.

    Revision: 11546
    Author:   [email protected]
    Date:     2009-11-06 15:42:05 -0800 (Fri, 06 Nov 2009)
    Log Message:
    fix so the textLayout.swc does not get modified during the build process.
    QE notes: no
    Doc notes: no
    Bugs: no
    Reviewer:
    Tests run: checkintests
    Is noteworthy for integration: no
    Modified Paths:
        flex/sdk/trunk/build.xml

  • Consumption values not getting updated on the material mastere

    HI Gurus,
    can anbody please explain me the reason why the consumption values not getting updated on the material master. What kind of movements qualify to get updated on the material master? is it 261, 101, 701 and 702 etc only? or any movement that means issues, receipts etc? I just happened to see a few materials which had some movements occur in the past but they did not get updated on the material master. These materials used to have ND MRP type until recently and these were changed to VM few days agao. could this be a reason? Please throw some ligjht on this. Helpful replies will be appreciated
    Thanks
    Anushga

    Dear ,
    Use tcode - OMJJ and then do the following setting -
    for movement - 261,262, 201 and 202
    Statistically relev. - 2
    Consumption posting - R
    for movement - 701 and 702
    Statistically relev. - 2
    Abhinay
    Edited by: Abhinay Sachan on Sep 10, 2010 1:38 PM

  • Deliver completed indicator is not getting updated in the PO item Overview

    Hi Gurus,
    We have the PO with quantity of 10 and it has been GR/IR, but the  Delivery completed indicator is not getting updated (Checked).
    The deliver completed indicator is selected in the config of t-code OMCD.
    Also there is no tolerance limit is maintained.
    Could you please suggest us why the indicator is not getting updating.
    Thanks & Regards,
    Sada

    Hi check follwoing
    1. Set Delivery complete indicator at plant leve
    spro - mm --inventory mgmt ---Goods receipt --- Set delivery complete indicator
    2. Control field selection for MIGO to disable users from changing it.
    spro -- Materials Mgmt -->Inventory Mgmt -- Settings for enjoy Transaction -->Field Selection for MIGO
    and chek this link
    ["Delivery Completed" Indicator
    Regards
    Kailas Ugale

  • Service Number is not getting updated in the Purchase Requisition

    Hi All,
    When i create a Service PR using bapi BAPI_REQUISITION_CREATE FM , service details ( Service number, Qty, Gross price, ) are not getting updated in Service tab of Purchase requisition transaction. I am passing all the services related parameters in the FM.
    Please clarify this.
    Thanks for the help.
    Vinoth

    Hi Vinoth,
    Are you getting any error in the return table?Can you show your coding?
    Regards,
    ravi

  • Service Number is not getting updated in the PR called by BAPI

    Hi ,
    When i create a Service PR using bapi BAPI_REQUISITION_CREATE FM , service details ( Service number, Qty, Gross price, ) are not getting updated in Service tab of Purchase requisition transaction.
    I am passing all the services related parameters in the FM.
    Thanks for the help.
    F.F

    Hi Amar,
    need your help. i am facing the same issue.
    how did you resolved it . please let us know.
    Thanks,
    Santosh

  • Few keyfigures are not getting updated in the backup cube

    Hi,
    We run the daily backup process chain which extract data from planning
    area and store in the cube & ods.
    There are infopackages which update cube & ods, the datasource & info
    source is same for both ODS & backup cube.
    But a few keyfigures do not get updated in backup cube where as we see
    ODS getting updated for those keyfigures. Also there exist data in the
    planning area for these keyfigures.
    There is direct mapping between the keyfigures in cube & planning area.
    We tried to debug it and noticed that data gets updated in update routine table but not get updated in cube.
    There are total 25 keyfigures in the cube , out of this only 5 keyfigures are not getting updated.
    Need expert opinion on this.
    Regards,
    Chetana

    Hi Chetana,
    Check the backup step in your process chain. The Data Selection tab may have certain conditions on account of which certain keyfigures in your Backup Cube are not getting updated.
    Check if any ABAP routine or any selection conditions are maintained which are causing certain keyfigs to be excluded.
    ~Rishi

  • Tuple data not getting updated during Import!!!!!

    Hi Experts,
    I am trying to update the tuple data using Import Manager.
    I am using Set tuple update
    New data - > Create
    Existing Data -> To update mapped fields.
    In the scenario there can be various Company Code data for one MDM ID. When I try to import the data for some of the records all the Company Codes are updated whereas for others some of them gets updated and not all.
    Has anyone come across this issue.
    Would really appreciate if you can share the solution ASAP.
    Thanks in advance.
    Best Regards,
    Parul Malhotra

    Hi Parul,
    Please do a test,try importing the same record through import manager.
    If you get correct result through Import manager and incorrect using MDIS it suggests there is an issue with the automated Tuple import.As Abhishek has rightly said there is a bug in SAP MDM SP04 and lower versions and that has been taken care in SP06 and higher versions.
    Please let us know your findings.
    Thanks,
    Ravi

  • CVD and ADC accounts are not getting credited during the Goods Receipt of Imports PO (India)

    Hello team,
    We are receiving the goods against with the Imports PO. Before the GR, we have paid the Customs duties to the Indian government. And, in the Invoice of Customs (MIRO), the CVD and ADC G/L Accounts got debited with the respective Accrual Accounts which are maintained in the Pricing of Imports at the CVD and ADC conditions. But, as per the standard procedure, during the GR, the same gets credited. But, it's not happening.
    Can anybody suggest what is the bug here that we need to correct?
    Thanks in advance for your response.
    Regards,
    Satya

    Have you used subtransaction type IP in MIGO.
    Refer below notes.
    929681
    - Subtransaction type not picked up for ADC in MIGO C&P EI
    910681
    - Legal changes on Additional Duty of Custom
    and
    964190
    - ADC on domestic purchase of imported goods
    Regards
    Binoy

  • APEX-The manullay created column is not getting updated in the database

    Dear all
    I have a form on page, which is created along with a report using Form on a Table with Report option. From the form I have deleted one field and recreated manullay as set the property as database column. When I am calling from the report page (using defualt edit option) the value is showing there, but if I am 'Apply Changes' , the column value in database is get updated with null.
    Please help
    DJ.

    This is the SQL and PL/SQL forum.
    Please re-post this on the APEX forum.
    Oracle Application Express (APEX)

  • Cost center field not getting updated to the second level dso

    Hi Experts,
    Data is going from one DSO to other high level DSO where in the source DSO there is cost center filled for a Purchase order but it is not in the target DSO. Target DSO fetches data from 5 DSO's and this is one of them.
    Please suggest.
    Thanks
    Sudha

    Hi Sudha,
    As you say that the load from source DSO to Target DSO is the final load, so question of overwrite does not come into picture.The only point which I feel is that the data might be getting resticted somewhere...
    Is there any routine in the transformation for that field available which will be restricting the load from the source DSO to the target DSO. Is there any start routine available..Please check all these things...
    Hope it Helps,
    Thanks,
    Amit Kr.

Maybe you are looking for

  • How do I remove a malware app that says it is needed for OSx and can't be removed?

    Some how I got an app named console on my computer yesterday.  When I try to uninstall it or drag it out of the Application folder or the utilities folder (it is in both of them) it says ""Console" can't be modified or deleted because it's required b

  • Hex value to Hex display

    I read in a text document from a server different HEX values ​​depending on the equipment i used. The Hex value is sent to a VI for TMT commands. And the entrance which must be presented as HEX display. I want to "convert" an appended path string wit

  • Help needed to somehow link ipad to internet via macbook pro's ethernet

    Hi all i have just picked up a new iPad 64gb wifi+3g. I work on a ship where i have a slow but reasonable ethernet connection to the internet. what i would like to do is use the MBP as a wifi hotspot or via usb cable to share the internet connection.

  • Import, package, connection

    Here's my problem. This a second forum, first one; no answer. I think here are all the necessary information, codes are quite long... I have 3 servlets, S1, S2, S3. and a java class Data. All these servlets, classes and build.xml are in a same folder

  • Looping video in a MovieClip

    I have a imported video converted to MovieClip, so that I am able to make mouse events, dragging etc to it. The problem is that i want it to loop forever. Regular FLVplayback codes doesn't anymore work after converting to MovieClip. I also tried to m