Excise register docs not updatiing by j1i5

Dear Excise Gurus,
As I have been updating excise register  by j1i5 for classification IIM (issue) , I could see some docs are not updating and showing  red signal.
I checked the table j_1irgsum and found that the cumulative receipt is less than cumulative issue.I  tried to update first the other receipts by j1i5 till the end of that month. But I could not find any other mat document with receipt for that particular material. So till the end of month the cumulative receipt remained less than cumulative issue. And I could not update excise register by j1i5 with  classification iim ( issue) for that particular material. I would like to update the document for the issue atleast by the end of the month. Kindly guide me with all the possibilities to update the same.
I also request to  provide the  other problems apart from the above mentioned problem for not updating the documents by j1i5. 
With Warm and Kind Regards
BHIKSHAPATHI

I am closing this issue.

Similar Messages

  • Excise Duty is not gettig posted in accounting doc

    Dear Experts,
    In one of my excisable plant, in pricing procedure, excise dutyeducation cesshigher edu cess is calcualted on the basis of base value, which is coming fine. But our requirement is that base valueexcise dutyeducation cess+higher edu cess, combine value should come in Net Value field while making order & invoice. Because of the same reason, excise duty value is not posted in FI, accouting doc of the same is not generating as only base value accounting documents got generated. I have tried by changing the subtotal value but it doesn't work. Kindly help.

    Dear Prashant,
    Thanks for reply, but i checked my excise cond types, in all conditions, cond cat is blank & cond class 'A' is maintained i.e. Discount & Surcharge.
    My problem is that, my excise value is not got posted in net receivable value in accounts. This problem arise, when we make sales order, Net Value field doesn't pick excise there & while invoicing, it post only the base value & rounding off adjustments at header level. I don't know, from where this Net Value field in sales order is picking the value but my problem will solve if my grand total value(base valueexciseedu cess+higher edu cess) will pass to Net Value field while making sales order. Kindly help.

  • Excise Invoice-Register Number not defined

    Hi,
    Iam using SAP 2007B, Pl 08. When I try to create Incoming or outgoing Excise Invoice, I get a error message "RG-Register Number is Not defined for Location". I have set the item as an Excisable item, the warehouse is an excisable warehouse and in the accounting tab of the Location setup the Excisable fields are put in properly.? Any solution
    Regards
    Kalli

    As you are aware, 2007B has Location wise configurations.
    So you have to define your locations first.
    open Administration -> Setup ->Tax -> Excise Register Numbering and set the location wise excie register numbers

  • Excise invoice is not meant for exports. Message no. 4F242

    Hi All
    As per my Client Requirement i need to do export sales from specific Plant(Depot). which is used for only export sales.
    i created STO and then i did Delivery and Billing (JEX) and created Excise invoice with refrence to Billing Doc
    while Creating  ARE - 1 document through T.Code J1IA101 it thronging ERROR
    0020000023/2008 excise invoice is not meant for exports
    Please give me u r suggestions
    Thanks in Advance
    Madhu

    Dear Madhu,
    As per your thread system is telling that invoice is not relevant for the exports so,
    Please check the Excise invoice which you created is it relevant for expotrs or relevant for STO billing i.e domestic.
    I hope it will help you,
    Regards,
    Murali.

  • Excise invoice does not exist in supplying plant

    Dear all,
    We are having a scenario where in we are doing stock transfer from one plant to other the system gives an error message that the excise invoice does not exist in supplying plant.
    Created a PO for stock transfer, posted GI against it, created excise invoice in J1IS with transaction type other. We are having separate excise registeration for the two plants.
    Secondly request to kinldy let me know what account enteries should be generated when we post excise invoice for the supplying plant.
    Regards,
    mahesh.

    Hi,
    In case of STO process using SD the process flow is like
    1. Create a PR against the supplying Plant (ME51N)
    2. Create a STO (PO) with ref to the PR (ME21N)
    3. Create a Outbound Delivery with ref to the STO. (VL10B/VL10D)
    4. Create a Proforma Inv (VF01) No Acc docs gets generated.
    5. Create a Excise Inv for the supplying Plant (J1IIN) Accounting Doc gets Generated.
    The Accounting Entries at the time of Excise Inv creation for the supplying Plant is:
    Excise Duty Expenses on  Sale                               Dr
    Excise Duty  Payable                                    Cr                    
    Sec.& Higher Edu Cess Payable on Excise               Cr                                            
    Edu .Cess Payable on Excise                    Cr
    At the time of Goods Receipt at plant
    1.Good Receipt at Receiving Plant (MIGO) - No Accounting docs get generated only Qty update takesplace.
    2. Capture & post the excise @ the Receiving Plant during MIGO by entering the Supplying Plant excise inv as reference.
    Hope it is Clear.
    Revert incase of any queries.
    Regards,

  • CVD and Excise Register Update for Free of charge Imported Material

    Hi,
    This is a scenario of Import Purchasing of Free Goods for which no price is paid to the Vendor. But the Custom and CVD Payment need to be made and we want to take benefit of CVD duties and update the Excise Register.
    Can anyone provide some idea to resolve this?
    Thanks in advance

    While trying to post Excise Invoice Value in J1IEX without Purchase Order I am getting an error "GL account has not been assigned for RG23ASED in customization"
    Does it mean G/L account needs to be assigned against EWPO for RG23ASED in customization or something is going wrong?
    Because I havenu2019t put any duty value under SED in J1IEX.

  • Excise Register In XL Reporter

    Hi Guru's,
               When am trying to generate a report for RG23A-PART - I RG23A-PART - II RG23C-PART - I RG23C-PART - II in XL Reporter it will not display  any values from B1.
    But In my B1 i alredy posted too many purchase order and sale order for excisable Item.
    and i also assigned the Chapter ID for the corresponding Item.
    So,How can i check it where can i fetch the data in B1.
    Plz Guide me am new to B1.
    Regards,
    Guru

    Thank U Gordon.
    I already refered this thread and completed all these process,
    1. Some of Items in Item Master are marked as 'Excisable'. (Item Master -> General Tab -> You can find 'Excisable' Check Box at the RIght Bottom.
    2. Check of 'Material Type' and 'Chapter ID' are mentioned for the items that are marked 'Excisable'
    3. Check if you have values in the 'Adminstation -> Setup -> Financials -> Tax -> Excise Register Numbering'. See if there are values in 'First No', 'Next No' columns.
    4. Check if you had done some Purchase or Sales or Inventory transactions for the Items that are marked 'Excisable'
    Even though the data's not coming in xl reporter.
    Is there any way to check the Excise data available in SAP B1.
    Tell me the corresponding tables.
    Thanks in Advance,
    Guru

  • Excise values are not updating in factory sales

    Dear SCN's,
    I'm facing an issue while doing factory sales, while creating sales order and billing I'm using J1IIN for excise invoice and then updating in J1I5 transaction but the values are not updating in table J_2IRG1BAL. Can anyone suggest what to do in order to get the values updated in table.
    Thanks & Regards,
    Kumar

    The following note explains how you need to update J_2IRG1BAL table.
    Note 951955 - CIN: General clarifications for RG1 goods
    Have a look at this.
    G. Lakshmipathi

  • Excise values are not updating in billing

    hi all,
    In RG23D register BED, AED, ECS values are showing correctly, but in order (VA02) or in billing (VF01) excise values are not showing. So, what could be the reason and what need to be checked?
    thanks.

    Hi MBS,
    yes im doing depot process.
    I maintained routine 356, and statistical
    and i checked pricing procedure analysis tab, where all conditions are activated.
    but still values are not fetching or shoeing in billing.
    any other solutions.....
    thanks.

  • Excise values are not showing in billing

    hi all,
    In RG23D register BED, AED, ECS values are showing correctly, but in order (VA02) or in billing (VF01) excise values are not showing. So, what could be the reason and what need to be checked?
    thanks.

    mohan prabu,
    Its Surprising, how come it is not appearing in Order and billing but yet it is passed to register RG23D.
    1. Check Whether you have maintained those condition types in your pricing procedure.
    2. Check whether you have maintained VK11 i.e., Values for those Excise Condition Types.
    3. Check whether you have activated Statistical indicator for those condition types.
    4. Proceed performing Analysis in Item details --> Conditions Tab --> Click Analysis tab provided to check whether the conditio types has been executed or not.
    5. Check your Config Settings
    IMG --> LG --> Tax on Goods Movement --> India --> Basic Settings --> Determination of Excise Duty -->  Maintain Excise Defaults
    Check these initially and let us know your outcome...
    Regards
    Sathya

  • Excise duty are not coming in utilization

    Dear All,
    Some excise invoices are not coming in utilization (J2IUN), what possible reaosn is there and how I can
    resolve this. Plz advice.
    regards,
    SP Shukla.

    Hi
    In J1IS transaction code first give all details like
    1) Ref document type
    2) Doc Number
    3) Doc Year
    4)Series Group
    5) Excise Group
    6) vendor or customer  press enter
    then click on insert line (shift +F6) fill all the fields now .
    Thanx

  • Addition of Columns in RG23D Excise Register

    Hi,
    In Excise Register Print (in Excel) of RG23D at depot through J2I6, we need to add few columns such as Material Code, Excise Registration (ECC) No. & Address (Excise Commissionerate) of Receiving Plant.
    Can any one assist in getting the required information in RG23D Register?
    Thanks in advance

    Hi
    I did same and we can  add additional column in J2I6 in exiles for that your required good abap consultant
    not only in RG23D,but in RG23A and C also we can do
    1)      Name & Address of Supplier/Buyer :
    J_1IRG23D u2013 LIFNR = LFA1 u2013 LIFNR
    2)      Excise Details of Supplier :
    table-J_1IMOVEND
    u2022     RANGE : J_1IMOVEND - J_1IEXCRG
    u2022     DIVISION : J_1IMOVEND - J_1IEXDI
    u2022     COMMISSIONERATE : J_1IMOVEND - J_1IEXCO
    u2022     ECC  NO : J_1IMOVEND - J_1IEXCD
    3)     RG23D Register No : J_1IRG23D u2013 FOLIO
    4)     Purchaseu2013 Material & Excise Details
    u2022     Description of Goods :  J_1IRG23D u2013MAKTX
    u2022     Pkt. Quantity : J_1IRG23D  - MENGE (Qty) & J_1IRG23D u2013 MEINS
    u2022     Rate : J_1IRG23D-EXBAS /J_1IRG23D- MENGE ( VALUE In Rs / Qty)
    u2022     Tariff No. : J_1IRG23D u2013 CHAPID
    Regards
    Kailas Ugale
    Edited by: kailasugale on Oct 21, 2011 12:35 PM

  • Excise register balance update

    Sir,
         Our client uses FI JV for excise duty utilization instead of standard transaction J2IUN. As a result the balance in Ex registers RG23A/C part 2 is showing excess amount than actual. Part 1 register is updated through J1I5. How to correct balance in part 2 register.
    Thanks in anticipation.

    HI,
    Inorder to correct the Excise Register balance you have to pass a Excise JV using transaction J1IH other adjustments..
    Regards,

  • Excise Register in Return Delivery

    Hi Experts,
    When we return the excisable material to vendor against Return delivery (122 movement), we make excise invoice thru T-code J1IS and excise transaction type MATD. When we see this excise entry in part 2 table J_1IPART2. Register Type is coming D, whereas it should be register A.
    What should we do in SPRO.
    Please help us out.
    Full points to helping answers.
    GR.

    Hi,
    Normally when we do Vendor Returns we do create excise invoice for the retunable materials using J1IS. In this case the system wil take it as normal sales & it wil update the D (Dispatch) register only & not RG23A.
    i.e Suppose your PO has 100 items, GR for 100 & then 20 Qtys got rejected. So for tht 20 you will create an Excise invoice & our Dispatch register wil b updated. So our liability side wil increase in the excise books n not like the amount for 20 Qtys wil be deducted from our RG23A ( ie. 100 we have captured & posted at the time of MIGO).
    So when the vendor returns the goods we wil again do GR & capture n post excise for 20 Qtys.
    So ultimately Our credit side is 120 & our Liability side is 20 so this 20 wil get knocked off.
    Thanks & Regards,
    SAP FC

  • Excise Register NUmber (Indian Localization)

    Hi Experts,
    I am created one location by the name of Hyderabad and after giving the PAN No. and ECC No i had choosen XD 001.
    and when i am going to attach that location in the excise register number i am not finding my location.
    why ?
    Ashish Gupte

    Yah Mr Ashish Gupte ,
    SAP B1 doesnot support for Depot warehouse u need to select as XM001 or XM002 and in below ecc number u have to give eccno and XD001 or XD002 and then u can go for numbering of Excise .
    Regards,

Maybe you are looking for