Excise Tables are not updating

Hi,
I have a issue in Depot sale. I created a GR against a PO. Then I posted a Excise invoice. But the excise tables are not updating.
Why it so? Plz explain.......
Thanks & Regards
Saeed

Hi,
While doing the GR through T Code MIGO ( Good Receipt + Purchase Order) > Tick on "Item Ok" & Enter > and see one more additional menu will appear > Excise Invoice >Is there two options 1) No Excise Entry 2) Create RG23D Entry.
If you need to update Excise detail through MIGO you can select "Create RG23D Entry" or if you not require to update Excise entry through MIGO you can select "No Excise Entry" & after generating the GR document you can proceed for Excise updation through T Code J1IG.
Hope that you are understood.
Thanks & Regds,
Rajesh Kolhe

Similar Messages

File-to-rfc ..database tables are not updating??

hi xi friends..
in my file -to-rfc scenario.. without BPM ..
in sxmb_moni..it is showing successfull.. database tables in sap not updating..
my source structure..
workorders 1..1
..order 1..unbounded
...id
...operation 1..unbounded
.....id
.....closingdate
.....status
.....comment
my target is Zbapi_alm_conf_create..
Zbapi_alm_conf_create
...Zdetail_return 1..1
.....item 0..unbounded
...Ztimetickets
.....item 0..unbounded
.......orderid
.......operation
.......fin_conf
.......con_text
.......exec_fin_date
in message mapping:
MM_file_to_zrfc
i changed the occurance of target to unbounded..
message mapping like this..
my source structure..
workorders 1..1
..order 1..unbounded   --------->Zrfc 0..unbouned
...id                  --------->Ztimetickets-item-order
...operation 1..unbounded ------>Ztimetickets-item 0..unbounded
.....id                ---------->Ztimeticktes-item-operation
.....closingdate       ----------->Ztimeticktes-item-exec_fin_date
.....status            ----------->Ztimetickets-item-fin_conf
.....comment           ------------>Ztimeticktes-item-conf_text
and also in interfacemapping ,changed the target occurance to unbounded.
and in ID ,interface determination using enhanced i selected interface mapping with occurance unbounded..
in sxmb_moni it is showing success..
in adapter monetering( receiver).
<i>Receiver channel 'cc_sap_work' for party '', service 'SAP_ERP__DEV' (internal name 'RfcClient[cc_sap_work]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=thotv, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Current pool size: 0, maximum pool size : 1
Channel History
- OK: 2006-12-31 14:19:47 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE
- OK: 2006-12-31 14:18:50 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE</i>
but the database tables are not updating..if i execute ZBAPI_ALM_CONF_CREATE manually in SAP ..tables are updating...
please guide me...
thanks in advance...
regards
Ram

Hi..
my mappis is like this..
message                   message
.message1                         message1
..workorders 1..1
..order 1..unbounded   -
>Zrfc 0..unbouned
...id                  -
>Ztimetickets-item-order
...operation 1..unbounded -
>Ztimetickets-item 0..unbounded
.....id                -
>Ztimeticktes-item-operation
.....closingdate       -
>Ztimeticktes-item-exec_fin_date
.....status            -
>Ztimetickets-item-fin_conf
.....comment           -
>Ztimeticktes-item-conf_text
i didnt mapped message at root..is this necessary to mapp messages??
please tell me
regards
ram

HR Tables are not updated due to compression error

We have a custom program that program used to copy data from Production system to other QA systems. The program uses the FM
Table_decompress to decompress the file downloaded from Production and update the HR tables like PA* series in QA.
While uploading the those tables from the file it updates half of the tables and other tables are
not updated as FM Table_decompress produces a exception saying "Compression error". what would be the problem here?
Edited by: Ganesh Kumar on Feb 2, 2011 10:14 AM
Edited by: Ganesh Kumar on Feb 2, 2011 10:25 AM

I have provided some information below that may help.
Step 1. Update the device using VZ Access manager. Instruction below:
http://support.vzw.com/clc/devices/knowledge_base.html?id=14636
Step 2. Unplug the device (if tethered), restart the computer, and try another USB port (if applicable).
Step 4. Deleting and recreating dial-up connections.
http://support.vzw.com/clc/devices/knowledge_base.html?id=23830
Step 5. Try to connect.
Step 6. (If Step 5. Fails) Disconnect, unplug the device, completely uninstall the current version of VZ Access Manager, and restart the computer.
Step 7. Download VZ Access Manager from our website www.vzam.net
-On the main page, select Supported Devices on the left hand side.
-Under the Data Devices like for Verizon Wireless USB 760 (second from the bottom of the row)
-Select the link under the Windows 7 column for the Verizon Wireless USB 760
-Click Download Now and Save to the desktop
Step 7. Install VZ Access manager using the downloaded file
-Follow the step up instructions
-Plug in the device when prompted
-Try to connect
I hope this helps.

Excise values are not updating in factory sales

Dear SCN's,
I'm facing an issue while doing factory sales, while creating sales order and billing I'm using J1IIN for excise invoice and then updating in J1I5 transaction but the values are not updating in table J_2IRG1BAL. Can anyone suggest what to do in order to get the values updated in table.
Thanks & Regards,
Kumar

The following note explains how you need to update J_2IRG1BAL table.
Note 951955 - CIN: General clarifications for RG1 goods
Have a look at this.
G. Lakshmipathi

Excise rates are not updated

Hi friends
When i am creating ARE3 document, in item details Duty rates tabe- excise rates are showing 0, whereas Duty values are coming,
I have checked in table j_1iexcdtl - duty rates are not updated and duty values are updated
How to update the table j_1iexcdtl
Thanx and Regards
srini

Dear MBS
Thanks for reply
I am doing deemed export process
I am using TAXINN calculation procedure and pricing procedure was ZDEEM.
as you said i have already done the classify condition types as below
ZDEEM - JEXP - BED percentage
ZDEEM - JECS - ECS percentage
ZDEEM - JA1X - AT1 percentatge
I have checked the table and it was updated,
now i am trying to create ARE3 document but the values are not coming into ARE3 document, only ECS percentage is coming and all the values are showing 0
and how to resolve the issue
Regard
srini

Excise details are not updating in MIGO

hai, i am working with CIN,,i raised a Purchase Order and all the taxes maintained are updating in Invoice tab of PO...
whn i am tryimg to enter GR ,
the excise Invoice and excise item tabs are displaying but the excise values(BED,AED )are not updating frm PO..
can anyone help me

Hi,
1) check whether u have mantained the Default condiition types in CIN settings.
Path SPRO->Log Gen->Tax on goods movt->india->maintain Excise defaults.
2)Check the JMX1,JEX1,JHX2 condition maintained as 100% in FV11
regards,
sujit

Excise values are not updating in billing

hi all,
In RG23D register BED, AED, ECS values are showing correctly, but in order (VA02) or in billing (VF01) excise values are not showing. So, what could be the reason and what need to be checked?
thanks.

Hi MBS,
yes im doing depot process.
I maintained routine 356, and statistical
and i checked pricing procedure analysis tab, where all conditions are activated.
but still values are not fetching or shoeing in billing.
any other solutions.....
thanks.

CDHDR and CDPOS tables are not updated

Hi,
When I am trying to change (or delete) Project definitions or WBS elements (changed all its related data which have change document ticked in its data element) those changes are not captured in CDHDR and CDPOS tables.
Here in our system PROJ object class exists in SCDO t-code and has all its generated programs, but still not able to find changes in CDHDR and CDPOS tables.
Can anybody plz let me know if I am missing anything or PROJ is not the appropriate object class or does BASIS team need to do any configuration to capture change documents in CDHDR or CDPOS tables because I do not see not even one record with PROJ object class in those tables.
Appriciated for quick response.
Regards,
M, Manohar

Hi Manohar,
Even we have project system in my project.We are able to see the changes and we did not done any settings for that.Just check with your basis people else raise an oss note.I did not see any sap notes also related to that.
Regards,
Madhu.

Value Mapping Tables are not updated in RWB cache

Hi Friends,
I am doing value mapping replication from SAP.
I am following
/people/sreekanth.babu2/blog/2005/02/23/value-mapping-replication
1)
I didnt changed ABAP proxy of ValueMappingReplicationOut in SAP system.
is anything to... its already in Active state
2)I used ABAP report to call proxy in SAP system.
while debugging ,I come to know that values are populating in the structure svmr_value_mapping_replication in proxy.
3) activated Java inbound proxy (async).I got respose like
Interface http://sap.com/xi/XI/System#ValueMappingReplication registered with value localejbs/sap.com/com.sap.xi.services/ValueMappingApplication:valueMappingReplication
4) No message Mapping .because sender and receive using same message type ValueMappingReplication in http://sap.com/xi/XI/System of SAP BASIS 7.00.
4) I didnt done Sender agreement because of sender is SAP here.
6) In receiver communication channel i follwed help.sap.com
i used PIAPPLUSER
7)
but I am not getting values in RWB Cache.
8) i didnt find any message in sxmb_moni
8) I did cashe refresh and CPA cache refresh too..
correct me please..
suggest the relevent
regards
Ram

Hi Sarvesh,
Thanks for your responses.
Now RWB ValueMapping Table is updating.
I tried my luck with Single row of Target and Source values.
I am lucky.
Now I tried my luck more than One row..But I am not getting values the way I required.
Please have a look in below screenshot from RWB.
[http://www.imagehosting.com/show.php/1735277_ValueMapping.jpg.html]
I am getting the first Taget value for all Target avlues.
In Details Tab,It is showing all the values of source and target values.
In my observation,It should show only one source value details.[http://www.imagehosting.com/show.php/1735286_Valuemapping1.Jpg.html]
Please guide me.
Is ther any necessary to change Abap report logic.
my abap logic look like this.
data: lcl_value_mapping type ref to co_svmr_value_mapping_rep,
ls_value_mappings type svmr_value_mapping_replication,
ls_item type svmr_value_mapping_rep_item,
lcl_system_fault type ref to cx_ai_system_fault.
ls_item-operation = 'Insert'.
ls_item-group_id = '315286378563858425463215845123544'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'OTDVendor'.
ls_item-identifier-agency = 'OTD'.
ls_item-identifier-value = '111'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
ls_item-operation = 'Insert'.
ls_item-group_id = '315286378563858425463215845123544'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'SAPVendor'.
ls_item-identifier-agency = 'SAP'.
ls_item-identifier-value = 'XXX'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
create object lcl_value_mapping.
try.
call method lcl_value_mapping->execute_asynchronous
exporting
output = ls_value_mappings.
commit work and wait.
if sy-subrc = 0.
WRITE : 'Value Mapping Executed and Values sent to XI system'.endif.
catch cx_ai_system_fault into lcl_system_fault.
write: 'Error: ', lcl_system_fault->errortext.
endtry.
clear ls_value_mappings-value_mapping_replication-item[].
ls_item-operation = 'Insert'.
ls_item-group_id = '315286378563858425463215845123544'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'OTDVendor'.
ls_item-identifier-agency = 'OTD'.
ls_item-identifier-value = '222'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
ls_item-operation = 'Insert'.
ls_item-group_id = '315286378563858425463215845123544'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'SAPVendor'.
ls_item-identifier-agency = 'SAP'.
ls_item-identifier-value = 'YYY'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
try.
call method lcl_value_mapping->execute_asynchronous
exporting
output = ls_value_mappings.
commit work and wait.
if sy-subrc = 0.
WRITE : 'Value Mapping Executed and Values sent to XI system'.endif.
catch cx_ai_system_fault into lcl_system_fault.
write: 'Error: ', lcl_system_fault->errortext.
endtry.
Regards
Ram

Server 2010 SP2 - New values in lookup table are not updated in the user client

Hello,
I added a value to a lookup table in the PWA.
Most users see the new value in the field based on this lookup table.
One user doesn't see the update for 2 weeks now. He did close and opened the application over these 2 weeks.
Any Idea?
Thanks,
Barak

Hi Barak,
I am assuming the issue is with PWA? Has the user tried to access PWA from a different machine/browser?Other things you can try are:
- Reset IE settings
- CTRL+F5 (on the page)
If it is MS Project that doesn't have the new value, try closing MS Project and re-open it
Hope this helps
Paul

Excise Base amount not updated in J_1iexcdtl table -reg

Dear Gurus,
We have used SAP Ecc 5.0 Patch level 21. In patch level 20, SAP admit without delivery , can do commercial billing and excise billing in foreground. After batch update SAP not support excise invoice creation in foreground. It support only background. We have 2 senario. 1 is capex sales . ie. without material stock we have raise the comm.billing and excise billing. 2 is supplimentary billing. both the senario now getting effected because of no delivery. Asper SAP advise we have setting for background process excise invoice creation. Excise invoice created. but excise base amount not updated in j_1iexcdtl table. Using J_1I7_USEREXIT_CALC_EXC_BASE user exit we are trying to update the same. For single material it works fine. But more than one material for the first material's base amount is updated in all materials. for your reference i have mentioned the codding . SAP advise it is possible to update excise base amount. But not possible to do. pl.adivse if any correct or guide to solve it.
FUNCTION J_1I7_USEREXIT_CALC_EXC_BASE.
""Local Interface:
*" IMPORTING
*"     VALUE(EXCITM_BASE) TYPE KOMV-KAWRT
*"     VALUE(POSNR) TYPE VBRP-POSNR
*" EXPORTING
*"     VALUE(EXCITM_BASE) TYPE KOMV-KAWRT
*" TABLES
*"      KONV STRUCTURE KONV
*{   INSERT         RDSK925285                                        1
TABLES : KONV.
data :   W_INDEX LIKE SY-TABIX.
DATA :ITAB LIKE TABLE OF KONV WITH HEADER LINE.
DATA :ITAB1 LIKE TABLE OF KOmV WITH HEADER LINE.
ITAB1[] = KONV[].
DATA : BEGIN OF I_TAB OCCURS 0,
       KAWRT LIKE KONV-KAWRT,
       POSNR LIKE VBRP-POSNR,
       END OF I_TAB.
LOOP AT ITAB1.
READ TABLE ITAB1 WITH KEY KSCHL = 'JMOD' KPOSN = ITAB1-KPOSN.
IF SY-SUBRC EQ 0.
    EXCITM_BASE = ITAB1-KAWRT.
    POSNR = ITAB1-KPOSN.
ENDIF.
ENDLOOP.
*}   INSERT
ENDFUNCTION.
Thanks & Regards
R.Udayakumar

solved with the same user exit

Unable to proceed in change document are not updating in CDHD, CDPOS tables

Hi all,
This is a question related to Change document.
I created one custom Change document object ZBUDGETS.
As I am trying to place a trigger on FMIT (Total Funds Management) table I created a Change document object ZBUDGETS.
I included some of the authorized fields from FMIT table on which we placed the trigger.
And of course all those fields are change document enabled in the data element level. I generation of the update program was completed. And I got the function module zbudgets_write_document along with some include programs and structure.
Everything is fine, But i am unable to get this change document generated information to these tables are CDHDR and CDPOS.
the problem is when I make any expenditure like PO Posting, it will be logging in the FMIT table and the respective fields also updating. With this the Change document object should trigger and it should send the record in CDHDR and CDPOS tables. This is not happening. If the records are getting updated in the CDHDR and CDPOS tables I can use those include programs and function modules in my program to retrieve the changes in FMIT table.
Since I am unable to proceed further since the documents are not updating in CDHDR and CDPOS tables.
Prabhakar

CDHDR and CDPOS will not be populated with entries only by creating the change document object.Change documents will be written to CDHDR and CDPOS tables only if the function zbudgets_write_document is called in the transaction which updates FMIT.
You need to find an use exit in the transaction updating FMIT and call the function zbudgets_write_document in that exit.
Refer the below link http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa01b6493111d182b70000e829fbfe/content.htm
-Kiran
*Please reward useful answers

Excise values are not copied to Commercial invoice in trading process

Hi All,
I have an issue while creating VF01 the Excise condtion values (BED, AED) not copied to commercial Invoice.
Other inputs about the scenaio:
The process is 1Customer schduleing agreement->outbound delivery->J1IJ->commerical invoice(VF01)
We had vendor agreement in which 3 line items were crated with qty of 500, 1000 and 1500 qty
for the first line item when we created total cycle upto VF01 the Excise values are copied where as for the 2nd and 3rd line items the excise values are not being copied to VF01. Here note the only difference beween these 3 line items is mateial code is different.
J_1irg23d table is showing the BED and AED condtion values for the 2nd 3rd line item aswell.
Checked PO also for the 2nd and 3rd line item showing the Excise tab in which Excise values are showing.
MIGO and MIRO were created with correct PO only
We maintan the condtion reocrds for BED and AED as 100%, what ever the Excise values maintained in MIRO the same will be copied to VF01.
Once again just would like to reconfrim the issue is out of 3 line items of the sheduling agreement for the first line item BED and AED are copying to VF01 where as for the 2nd and 3rd line item BED and AED values not copying to VF01.the only difference is material code between the line items.
Please let me know if you need any further details.
Thanks in advance.

Thanks sir for your reply.
have you declared the receiving plant from overseas as a Depot?
Yes it was defined as depo plant in configuration of plant settings.
Actually i should have mentioend total cycle before. However, i have mentioend in my OP as
MIGO and MIRO were created with correct PO only
But anyway please check my total cycle as below.
ME31L (vendor agreement)
MIRO(customer custom vendor payment)
MIGO(with ref Vendor agreement/PO) here the excise duties are captured as well, we will not do seperately JIIG.
MIRO( actual vendor payment)
VA31(customer agreement )
VL01N(outbound delivery)
J1IJ(with ref delivery) here we sellect the MIRO invoice
Vf01( commerecial invoice)
Upto J1IJ all the values calculated and copied ok. Only during VF01 the BED and AED values anot being copied. Even i tried the update button but not updated.
For time being we are entering the BED and AED condition values into VF01.
thanks,
Message was edited by: surya prakash

Problem in pricing conditions are not updated in BAPI_SAG_CHANGE

Hallo Friends,
we have faced the one problem with the standard bapi *BAPI_SAG_CHANGE.
we have passed the 10 item level data to the BAPI_SAG_CHANGE , the bapi BAPI_SAG_CHANGE successfully updated the 10 item level data to the schedule agreement .
the problem is pircing condtions are not updated succesfully for the each items in the schedule agreement.
please suggest the good solution.
thanks
kumar

Hi jons,
Thanks for respoding my request, Please find my below code lines
CALL FUNCTION 'BAPI_SAG_CHANGE'
        EXPORTING
          purchasingdocument           = st_header-number
          header                       =           st_header
          headerx                      = st_headerx
        VENDOR_ADDRESS               =
        HEAD_EXPORT_IMPORT           =
        HEAD_EXPORT_IMPORTX          =
        TESTRUN                      =
        TECHNICAL_DATA               =
     IMPORTING
        EXP_HEADER                   =
        EXP_HEAD_EXPORT_IMPORT       =
       TABLES
                return                = st_return
Begin of modify by kirankumar 07/12/2009
               item                  = st_item
                 item                  = st_item[]
End of modify by kirankumar 07/12/2009
                itemx                 = st_itemx[]
                account               = st_account
     accountprofitsegment = st_accountprofitsegment
                accountx              = st_accountx
                schedule              = st_schedule
                schedulex             = st_schedulex
                sc_component          = st_sc_component
                sc_componentx         = st_sc_componentx
                shipping              = st_shipping[]
                shippingx             = st_shippingx[]
     shipping_exp          = st_shipping_exp
                delivery_address      = st_delivery_address
                item_cond_validity    = st_item_cond_validity[]
                item_cond_validityx   = st_item_cond_validityx[]
                item_condition        = st_item_condition[]
                item_conditionx       = st_item_conditionx[]
                item_cond_scale_value = st_item_cond_scale_value
                item_cond_scale_quan = st_item_cond_scale_quan
                export_import         = st_export_import
                export_importx        = st_export_importx
                item_text             = st_item_text
                header_text           = st_header_text
                head_cond_validity    = st_head_cond_validity
                head_cond_validityx   = st_head_cond_validityx
                head_condition           = st_head_condition
                head_conditionx       = st_head_conditionx
                head_cond_scale_val   = st_head_cond_scale_val
                head_cond_scale_quan = st_head_cond_scale_quan
                partner               = st_partner[]
                partnerx              = st_partnerx[]
     extensionin           = st_extensionin
                extensionout          = st_extensionout.

Excise Details are not maintanied for Vendor: GRN error

Dear All,
We have upgraded our Ecc 6.0 system to latest application SAPKH60016 ( SAP_APPL ). WHile testing the system, for import GR's we are getting error saying Excise Details are not maintanied for Vendor. J1ID is also maintained & previously we have received lot of GR's for the same vendor. No changes have been done to Vendor & CIN master.
Please let me know if any note or object to be updated to correct this error.
Thanks
Raghavendra.

hiii
Can u tel me where exactly the excise range was missing ??
Because if excise range is missing , it won't throw this lind of error .
U have found any other???????
Thnaks
SAP-MM

Excise Tables are not updating

Similar Messages

Maybe you are looking for