Excise to capture from PO

Hi,
My requirement is to capture excise value in pricing ( at the time of sales) from the Purchase order of that material.
How to capture this?
Rgds
Gaurav

ok, so with an external non-usb firewire camera -- yes, but with webcam --- no.
is that right?
if i buy a camera, then i will be able to record multiple video tracks in premiere?
basically -- i want to make multitrack acappella videos with lots and lots of video tracks.
thank you very much for your responses -- i really didn't expect them -- so that is very nice!

Similar Messages

Excise invoice capture process

Hi,
I want to know about excise invoice capture process for depot plant which t. cod eis use for depot plant how to do the part1 and part2 and also reversal process for the same.
also what is diff. between excis einvoice capture process for depot and non depot plant.
regards,
zafar

Hi Zafar,
There are no part 1 and part 2 in RG23D for depot scenario. You can update RG23D at the time of MIGO or J1IG "Capture excise invoice for depot".
For cancelling you can use the same transaction. And to send the goods out from Depot plant use T-code J1IJ for updating RG23D.
Rest process remains the same Extraction J2I5 and print through J2I6.
BR

Post of Excise Invoice(Capture through EWPO)

Hai,
I am getting error when i am posting the excise document(Capture through EWPO)
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 76,632.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Please give me the solution for above error
Regards,
Ramu

hi,
please check that while simulating do it is debiting to both onhold account and clearing account.
if it is,
then goto to spro> logi gen> tax on goods movt> basic setting>account determination per excise transaction
in that
search for EWPO and delete the line of onhold account .
Please COnfirm if that works,
Regards,
Vijay

Change of Excise Basic Rate from 8% to 10%

Hi Every Body,
Our basic excise rate changed from 8% to 10% now in our Indian scenario for condition types JMOP from 27.02.2010 and now we can mantained JMOP at plant , material & vendors level in FV11 10% .
But now we face the issue for the previous bill to be passed at previous rate 8% but system picking 10% because of changed rate.
Ultimately we require both the rate at same plant , vendor and material level then we mean to say that there is any provision in SAP so we can maitain both the rate at time and whenever invoicing requires depending upon old and new case , accordingly we pass..
Thanks,
Dharmveer

There is solution for it
1. First You need to retain old tax code combination with excise rate - 8%
2. Second you need to create new tax code combination with excise rate - 10%
or
You can GR material ,manually enter excise amounts,
capture excise invoice,refer it in migo,post excise invoice,do bill passing(MIRO) without tax code,
Note: Add g/l acct tab in miro using customization,manually enter cenvat clearing amounts(but it not adivised,you can do it,if there is no change in stock or no price variation)
Also refer Note 1435105 - Master note for Indian Budget 2010 for Logistics (MM & SD)
Edited by: Jeyakanthan A on Mar 18, 2010 11:01 AM

Can not capture from Sony HDV 1080i (recording in 60i)

Hello
We are trying to capture from the above camera to a Mac Dual G5. We are using FinalCutPro 5.1.2. We are using a FireWire 400 cable to connect to the front of the computer (have also tryed back of Cinema Display). The footage was captured in HDV1080/60i, and we have tried the corresponding formats in Easy Setup (Basic, standard, Apple Intermediate).
The problem: we can control the camera from the Log and Capture windows, but when starting capture, no data is coming in, and the program therefor gives up after a few seconds (displaying a no data error message).
We have tried Batch and Now capture. We can log clips, and get the correct time code, but can not capture those clips due to the no data problem.

This is a good workaround for curing your camera recognition problem with FCP (if that's what it is):
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
Still not working? Try a different Firewire cable.
Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
Let us know how you get on!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Unable to capture from Sony HDFX1 camera

Built a new PC and utilized a top end ATI Radeon dual video card. Running Vista Ultra OS(hmmmm), plenty ram, processor, etc.
PC does not see my camera when I plug in for capture. Do I need a special codec or 1394 HD drivers available for HD capture from ATI or from Adobe perhaps?
Frustrated

If the Vista install was a standard installation, Vista should recognize the camera automatically and install the correct drivers. Nothing you need to do. Make sure that you connect the firewire cable first between the camera and the on-board firewire connector. Do not try to connect it to the ATI card. Once the cable is connected, turn on the power on the camera and set it to VCR. Vista will then install the necessary drivers automatically and if they have been installed previously, show the autoplay box. Make sure that the menu in the camera is correctly setup to use the iLink connection and the format you shot in, so either DV or HDV. Consult the Sony manual for that. If the does not work, try a different cable first.

Capture from Sony HVR-Z1U

I have recently purchased a Sony Z1U and was unable to capture in FCE4. I later found out that FCE4 will only capture from the Z1U in DV mode and NOT in HDV. Why is this? Is all my HDV media useless now that I have FCE4? Should I only shoot in DV mode from now on? I also have a small Sony HRD-CX7. Will FCE4 capture from this device?
Any help for this newbie would be appreciated!

"do not connect to the computer. Connect it to the hard drive so they are on a single FireWire chain. The computer will have difficulty passing information back and forth on FW when there are multiple devices on multiple ports but on a single bus"
In theory this may be true, however my external drive only has (2) 1394b ports. My camera has (1) four pin 1394a port that converts to a six pin 1394a through the cable assembly. There is no way to chain these components together (via my external drive anyways) as far as I can see. Is this a critical issue? Should I invest in a different drive? I guess I could connect to my ED via esata using an express card. Would this approach lessen the load on the FW bus during capture and delegate a separate bus for ED control?
Any thoughts on this?
Message was edited by: Chad Clemens

Capture problem when capturing from DVCPro HD Deck

I'm using Premier Pro Creative Cloud and can't seem to capture from my Panasonic HDX900 camera via IEEE firewire to my PC. My footage is 1080 60i. I can't control the camera remotely or see images in the capture monitor. The record and shuttle controls are grey-out. Does anyone have a solution to this problem? Thanks Darold

Thanks Richard, I think your are right – I appreciate your response!
Cheers,
Darold

Why does my FCX program quit suddenly when I try to capture from my camcorder?

Why does my FCX program quit suddenly when I try to capture from my camcorder?
When it opens it says "no codec found". I used HDV Apple intermediate codec 1080i60. What codec should I use?

Do you mean Final Cut Express or FCP X?
These are two different apps.
Al

Final Cut Express won't allow me to capture from my vdo camera

I just loaded Final Cut Express HD on my Mac because I wanted to upgrade from IMOVIE. My Powerbook G4 had no problem capturing video with my Sony HDV 1080i video camera. But I can't get Final Cut Express HD to locate my camera at all no matter what "easy setup" setting I choose. But if I turn on IMOVIE, the program can capture from my video camera no problem. I know the firewire cable is hooked to the computer correctly & the camera is on & in the VTR mode. If anyone can help me identify this problem, I'd really appreciate it because I'm trying to begin a new video project & can't if I can't capture video. Thanks for helping.

Fritz from Technical support told me about a glitch in Final Cut Pro & Express HD that happens when you upgrade to Quicktime 7. He told me to go to this article: Link: http://www.info.apple.com/kbnum/n301852
and follow the instructions & it would fix my problem. It didn't & then of course I called tech support back & it was after hours. I still can't capture from my video camera but it works in IMOVIE. I removed Final Cut Express HD from my computer (even all the files in library/users, etc.) and then reinstalled it. It still gives me the same error even though I have my camera plugged in & turned on. It says unable to locate capture device. This is unbelievable. Hopefully I can get some help. Brian

Urgent: Unable to capture from TV Capture Card

Hello,
I'm Ashish Shukla. I'm writing an application in JMF 2.1.1b using J2SE 1.4.0 on Win32 platform on Intel Celeron 1 GHz processor which captures from the capture device. It works fine on Intel Create & Share CS110 Web Camera. But now, I'm try to capture from the TV Capture Card Pinnacle Studio PCTV TV Capture Card (Composite Video).
But JMF Registry is not able to detect the TV Capture Card (connected alone) & my PC hangs. But, when WebCamera is plugged in, JMF Registry detects it.
When Both WebCamera (USB port) & TV Capture Card are plugged in, then JMF Registry detects only Web Camera.
If anyone can help me resolve the problem. I'm very thankful.
Yours sincerley,
Ashish Shukla
Wah Java!!

Dear friend
I have a similar problem, did you got the answer...
I m trying to get video from the video capture card first from video then for composite then for ..... each port ... but it looks not to be easy ...
c u
Thanks
[email protected]

FCE capture from my Canon XHA1 captures as one long clip

I've never had this problem capture using FCE before. I'm capturing from a Canon XHA1 and it's capturing the video as one long clip rather than the many short clips I shot. And unlike when you capture DV, you can't use the "DV start/stop Detect option" when the footage is HD..so that's not a solution.
I'm using a new Macbook pro and was wondering if that has anything to do with it given that i"m using the newest OSX as well.
Any ideas? It appeared to do the same thing when I captured into iMovie.
Or or is there a setting on the camera that I've failed to change?

Dear Phojo1,
I also have a XHA1 and am experiencing the same problem. I was wondering if you shot your footage in HD, and what are your settings on your camera for recording and outputting. The first footage I captured I used hd with 1440x 1080 apple intermediate with 29.97 rate. I had no problem. It captured each clip separately. Now I can only capture with dv/ntsc settings. I'm am trying to see where the problem is. By the way this started happening when I upgraded to 4.01. It also does the same in imovie. Thanks for any information.

I am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize

i am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize. I am not able to capture the content in DV mode. i am using a Firewire 800 to 400 converter and a 6 pin firewire cable to connect to the SonyHDV VTR. Please suggest me how do i do this.

The 800-400 converter plugs have proved a problem for this. What version of the software are you using. It sounds like an older version of FCP, if so you should ask your question on the Final Cut Studio forum.

Excise invoice capture process for dealer invoice

Hi,
As I read in many thread, that for the capture of excise invoice for dealed invoice in Po for item we have to maintain the base price as addition of both base value + excise duty amounts, then using MRP indicator we have to capture the duty amounts for dealer invoice but I have some query, when delaer make the invoice . they pass on the duty, even the duty amount is not intially known which excise invoice amount the delaer will pass, so while creating PO, How we can exactly enter he amount as BASE VALUE + DUTY amount, we have to chnage the the PO or without changing PO amount we can proces for capture of excise duty also in PO which tax code should be select , if we seelct the regular tax code which we use for excise invoice capture for other supplier then system will calculate the tax amount in the PO also, so which tax code should be calculate.
regards,
zafar

At the time of Po creation we will be knowing the duties which he will be passing you, but you will be not knowing the base price of material ,as vendor will add his amount also into the original base price and apss the invoice.
So will be creating the PO as original base price and excise only , but at the time of GRN he will add his profit into the base price and will give supply the material, so you need to change the base price while GRN to match the excise duties and tick the MRP indicator so that at time of miro the duties will flow correctly.
Hope this may help you.
BR,
Patil

Single excise invoice J1IJ from two outbound deliveries

Hi Experts,
Can we do single Excise Invoice (J1IJ) from two or multiple outbound deliveries in depo sales.
Please Confirm.
Thanks & Regards
Naresh

When you are returning the material, you get a material document.
You create an Excise invoice by using J1IS transaction with reference to the material document.
This excise invoice will come for monthly utilization
regards
prasad

Excise to capture from PO

Similar Messages

Maybe you are looking for