Excise value changing in MIGO

Dear all,
We have created a PO, and in migo we just captured the excise. We went th j1iex and selected change category and changed the excise value and it got posted. But at the time of MIRO, only the changed excise BED is appearing in the cenvat clearing account but for ECS and SHECESS the old values only appearing. What might be the problem?
Please suggest.
Thanks & Regards,
AR

Hello,
You first check in excise defaults are you using set off conditions e.g. JEX1 and JHX1 secondly in classify condition type (customzing)please check whats combination are you maintaining against the condition types of educess and sec high educess
Regards
Vivek

Similar Messages

Wrong Excise values posted in MIGO

Hi all,
This is Depot scenario.
User has posted wrong values in Excise tab in MIGO & posted GR. Excise values are updated in Table RG23D.
The same material is already disptached to the customer end.
Currently there is No stock of material in the system.
Now User wants to reverse all this wrong duties.
How to resolve this issue?
Pls suggest solution
Sameer

Hi,
Please reverse the material document in MIGO.
Regards,
Smitha

Excise values error in migo

Dear Friends,
this is chandra shekar , here i had one problem in migo transaction excise values are capturing in wrong way for example the material price is 100 rs BED is 8 % that is 8 rs when doing goods receipt for this material in item level excise value i'm getting 8 rs but in header level excise value it showing 80 rs that means in header level i'm getting one decimal place extra i dont know why it is caluclating in wrong , this error i'm getting from past 4 days ,in excise registers also it is updating with 80 rs only please any one can help me in this.
regards
chandu

Hi Anjali,
Thanks for your reply , but i have checked validity period it is correct, this problem i,m facing from past 4 days only , is there anything needs to check in decimal places , because it showing correct in item level but i header level only it is showing with one decimal more .
regards
chandu

Excise Value change during Part 1 and 2

Dear SAP Gurus,
1.)Requirement is that material store person should not interfere in the excise transaction not even in part-1, but the doubt is as per my knowledge part -1 can only be done before the GR or during the GR (along with GR). and client want part -1 and 2 can only be done by FI person so how to meet the requirment.
2.) and if no alternative is there on above the Part-1 is happening during the GR , then material store person should not change any thing in Excise duties. and if the requirement is to change the excise duties , it can be changes during the Part -2 .
Please suggest how to meet the requirment.
Thanks & Regards
Nitin Chhabra

hi,
Matain the proper box checked and unchecked in EXCISE GROUP SETTING in such a way that
it will Disable the following otions at MIGO
post excise invoice option
only captre invoice option
it will enable the following option
only part1
this will allow stores person to post only part one entries.There will not be any interference by stores person in excise duties.
then after GR fi person can capture excise invoice through J1IEX by refering the material document.
regards,
SNB

Excise Value Change at the time of Capture Invoice

Hi,
At the time of PO creation dt 02.02.2010, we selected the Tax Code XA with Basic Excise Duty, say, 10%.
When we are doing GR on 01.05.2010, the Basic Excise Duty has been changed to, say 12%.
Where we can make the changes happened in Excise Rate,
Can we enter the actual changed excise duty at the time of Capturing Invoice ?
(Note: I have posted the similar/ related question earlier also)
Please guide.

No,not a standard way as a work around.
Check this link to know about [What is SAP Note ?|http://help.sap.com/saphelp_470/helpdata/en/28/15ef3957fd0a1be10000000a114084/content.htm]
Check also this link [What are SAP Notes? Where do I can find them? How to use it? |http://www.sap-img.com/basis/what-are-sap-notes.htm]
Check also this link to know more about SAP Notes
Re: New SAP Notes in MM
Edited by: Jeyakanthan A on Jun 16, 2010 10:22 PM

Dealer Invocie -MIRO is not picking excise value from MIGO it takes from PO

Hi all,
      I have a issue in dealer invoice.
     I have raised a PO., made goods receipt against that PO. Entered the excise duties, education cess and Higher education cess manually in MIGO. Automatic posting is done for that excise invoice. When MIRO is raised it picks the value from PO.
   It is a new plant. The issue is in this plant only. The dealer invoice works fine for all the other plants.
Kindly help to resolve this issue.
Regards.

Hi ,
please refee below
     Creating a Purchase order with Zero Tax code
     Capturing of Excise invoice in J1IEX/MIGO.
     Activation of MRP indicator during capturing
     Posting the Excise Invoice captured.
     Invoice processing for the Purchase order
In the MIGO screen, you can find that the excise base value is defaulted as the PO price and the excise duties are zero.
Now manually enter the respective excise rates for Basic excise duty (BED), Educational cess (ECS) and Higher Educational cess (SECESS).
The excise base is changed such that the sum of the excise base value and the excise duties remain the same as the PO price. The excise base is reduced by the excise duty value and the differential amount is split amongst the relevant excise duty components.
In the miro screen change the base value as same that you have maintained in MIGO.
also refer the note which i am insisting so that you can able to meet your req.
Regards,
velu

Change mode of the excise invoice is showing zero excise values

H ifriends,
The change mode of the excise invoice is showing zero excise values.....and the same is reflected in the ARE1
While creating the excise invoice,its showing BEd/Ed and Shed and after saving,if i check the doc the values are shown aero...
Thanks
Sasi

s

Excise value has to changed at the time of VF01

Hi friends,
At the time of Billing i come to know the basic excise value is wrong .... now i want to change the Excise base value means ... what i have to do?.... PLZ guide me...

First of all, I dont know how come the excise value is flowing wrongly in your case due to the fact that excise condition type is based on percentage and it will calculate the proportionate percentage on sale value.
Nevertheless, you can follow the suggestion already proposed and also in billing, go to condition tab where you can see a button "Update" at the bottom right screen. Click this so that a small box will appear. Double click on "G" and see whether the value changes.
thanks
G. Lakshmipathi

Excise values are not flowing in MIGO

Dear All,
I am facing a problem during MIGO.
THERE IS STOCK TRANSFER BETWEEN 2 PLANTS AND 2 PLANTS ARE UNDER DIFFERENT COMPANY CODES.
1 I have created a PO.
2.Delivery through VL10D
3.Picking-vl02n
4.Created Bill-VF01
5.Created Invoice and saved it
When I am doing MIGO the excise values are not following.in migo SCREEN.I I want to know do i need to post EXCISE INVOICE and how to do the same.
Pl let me know anything is missed out so that excise invoice is not flowing in MIGO screen.
Regards
Manash

Hi,
Have you miantained Tax code in STO ? if yes, then have you mainatained Settoff as 100% for that Tax Code in FV11 for which combination you are using
SETOFF Must Be Maintained:-
JMX1 --     IN: A/P BED setoff
JEX1 ---      Ecess Setoff Sta
HX1     IN: A/P SECess SOTot
If it is there please follow the Following steps for STO
1.     Create Purchase Order(STO) using ME21N
2.     Create Outbound Delivery using VL10B
3.     Create Billing Document using VF01
4.     Create Excise Invoice using J1IIN
5.                   GR with respect to Inbound delivery and in Excise Invoice give number of VF01.
Hope Help U !
Regards,
Pardeep Malik

Excise Values in MIGO For MPN Materials

Hello,
While capturing the excise invoice for the MPN materials system is not picking the excise values. We are using the TAXINN procedure and i have maintianed the condition records for the Key combination country/Plant/Control Code/Taxcode (WE have created a condtion table for this key combination) and we also maintained the MPN materials in the J1ID also but it is not picking the values in the item tab. Taxes are caluclated in the Purchase order.
Note:
For the MPN Materials we have only three views maintained in the material master and it is not extended to any of the plant.
I have noticed that if use the other tax code which i maintained the condition records for Conidtion table 651 (key Combination of Country/Tax Code) the excise values are flowing in MIGO but if i use the tax code EA (Condition table 652 Key Combination: country/Plant/Control Code/Taxcode) we are not getting the excise values in MIGO
Please let me know if there is any configuration is missing.
Regards,
Kumar Rayudu
Edited by: Kumar Rayudu on Oct 1, 2009 2:10 PM
Edited by: Kumar Rayudu on Oct 1, 2009 5:19 PM

>
cnranjith wrote:
> Dear all
>
> When doing MIGO for Import PO excise tab is not appearing for the material
>
> I have maintained all the data in J1ID for the material and plant
>
> already we use to capture EI for the same material and plant but this time this is creating issues
>
> We have posted an inoice of planned delivery costs but no excise tab in MIGO
>
> What might be the reason
First you have to post the Customs MIRO in case of import purchase...then go for MIGO...you will find excise tab will follow....
Regards,
Indranil

Excise Base value wrong in MIGO

Hello ,
PB00 and some Z condition types are used in Pricing Procedure....And Excise is calculted
on the addition of PBoo+Z condition types, The BED and ECS and SECess is calculted correctly
While capturing the excise invoice in MIGO
We are using Ecc 6.0
While MIGo iam planng to capture the excise Invoice, while in Excise Invoice Tab, iam selecting
the "only Capture Excise Invoice"(In header)
In Item level Excise tab... we may see the BED.ECS,SECess and excise base value
We are getting the BED and ECS and SECESS is calculting the values correctly BUT
The Excise Base Value showing in the Base value field is wrong... why?
It is only showing the PB00 value here means PB0O value * Qty....... Here it is not giving the
addttion of Z condition types
But the BED and remaining values are calculated on PB00 and Z condition type. But why system
is taking only PB00 value in Base value tab in MIGO.
Regards
sapman man

Hello.
In this Z conditions are Stastical .... and We are not asigning any Account keys to them.....
In This case..... while Procurning the material for manufacturing plant..We are get the BED and ECS and SECEss are calculated on ZMRP-ZABT charges....
He re in our case the BED and ECS and SECess are correct. means it is calculated on ZMRP-ZABT charge...... But In MIGO the Base value shown is worng.... i,e is only showing us the PB00 value(means PB00 X Qty)
How to get the correct excise base value
Regards
Sapman man

Excise value not flowing in MIGO

Dear All,
While doing MIGO, the Excise value for BED, ECESS is not flowing but the values are flowing in Purchse order. But the SECESS alone is flowing in both PO and MIGO.
Points will be rewarded.
Thanks in Advance
Regards
Dhinakar

Hi raja,
h r u???
I have maintained all the settings, i thuink some note has to be applied. I will check it...
Thanks for ur Support
regards
Dhinakar

CIN--MIGO--Wrong excise value

Hi Buddies,
We created STO from Plant to Plant and taken SD side to the delivery and profoma and then excise invoice.
In this case, we created one STO- with four deliveries(with partial quantity) -one proforma(combining all deliveries in one proforma invoice) and one excise invoice with refercencing the proforma in SD. While doing MIGO(goods receipt in MM), if we give delivery number and excise invoice number, automatically it is picking the last line item of excise invoice. All BED,ECESS,SCESS is calculating wrongly in MIGO.
We noted that, system is always picking that last delivery excise value for each and every delivery in MIGO.
Regards,
G.Rajesh.

hi
we also faced similar problem and we done the corrections in the userexit
Can you please go through the SAP note mentioned below and apply.
1042035
1035545
1003634
If you mark the Condition category as 'H' for the Price condition
which has the assesable value then the Excise base value will flow but the price condition should be non statistical, if it is statistical in
your pricing procedure then you will have use the user exit
J_1I7_USEREXIT_CALC_EXC_BASE which has the KONV structure , you will
have to pass the value to the parameter EXCITM_BASE
hope it will help you in resolve the issue.
with regards
baalakrushnan.da

Base value & excise amount during MRP MIGO & MIRO

Excise base amount & excise values are calulated & put during MRP based MIGO & similar process is again done during MIRO.Can't this duplicacy be avoided.
Hitesh Chaturvedi

Hi
You have to calculate excise base value during MIGO as well as MIRO because both these activities are done by different departments.
Some times the value calculated during MIGO is wrong and is corrected by excise dept during part2 posting in J1IEX as well.
So u cant avoid it doing twice

Note 951952 - Incorrect excise values if batch split in MIGO for import PO

Dear participants,
We have applied Note 951952 - Incorrect excise values if batch split in MIGO for import PO,
for following issue,
While doing import goods receipt for batch split quantity,
excise base value is calculating for entire amount not by splitted quantity.
We are unable to solve this issue.
We are using SAP ECC release 6.0 level 11 whether above mentioned note can be applied or else any other
new notes to apply solve this issue.
Advance thanks
Regards,
A.Jeyakanthan

Thanks for reply,will check note is applicable for current package level.
Actually we found excise base value is same for GR of batch split quantities for same material
with valuation type import duty free.

Excise value changing in MIGO

Similar Messages

Maybe you are looking for