Excise Values not appearing in MIGO

Dear All,
We are using tax procedure TAXINN.
When I tried to create a GR doc with ref to a PO the excise values are not getting flown from my PO.
I tried both in MIGO as J1IEX, but the excise values are not getting flown.
Also please note that for the same PO we have done a GR during the month of Oct & at that time there was no problem & all the excise values was displayed in the GR doc.
Analysis done till now.
I have checked the Excise Default settings & I can see the JM0P codtn type maintained under the A/P BED condtn as well as the JE0P Ecess Condtn type maintained under the Ecess AP.
Also the values are there in the PO which was determined using the condtn records.
I have also checked the Excise group,plant, company code & Excise G/L determination settings in IMG & everything seems OK.
But still I am facing the Problem.
Is there anything which I have missed in the above analysis ?
Please suggest your val inputs to solve this issue.
Regards,

Hi SNB,
Thanks a lot for the reply.
As you suggested I havent maintained the condition records for the set off conditions such as JMX1, JEX1 etc..
When I maintained it the values got displayed.
Now I have One more query.
See earlier I have created PO's with out maintaining records for these set off conditions & at that time the values were displayed in MIGO.
So how the system worked at that time?
Also note that I havent maintained any of the set off conditions in the Excise defaults (Since these are just statistical condtn types) . Is it OK?
Also maintaining the set off condition with 100% is a must in TAXINN & Is it Possible to display the values in MIGO without maintaining the records for these condtn types?
Expecting your reply.
Regards,

Similar Messages

  • Excise Tab not appearing in MIGO Screen

    Excise Tab not appearing in MIGO Screen
    Reg
    Sunil

    Hi,
    For GR, which movement type you are using...?
    If it is 103, you will get the excise invoice tab only in 105 GR.
    If it is 101 only, check the following configuration.
    SPRO-Logistics General-Tax on goods movements-India-Business Transactions-Incoming Excise invoices-Specify which movement type involve excise invoices.
    Please revert for further analysis.
    Regards,
    Siva

  • Excise values not appearing in MIRO

    Dear All
    I have  created a PO , Made GR  Part 1,2 has been captured ,
    Due to some reasons we cancelled the GR , then we made a new GR for that PO
    Now i get in to MIRO i am not getting the Excise Conditional values , i get only my VAT values.
    Kindly throw light  on this 
    Regards
    R.Rajaram

    Hi,
    Cancel the excise invoice which was posted at the time of previous GRN. Then again post the excise invoice with reference to new GRN Then the excise amount will appear in MIRO.
    Regards,
    Prashant

  • Excise value not flowing in MIGO

    Dear All,
    While doing MIGO, the Excise value for BED, ECESS is not flowing but the values are flowing in Purchse order. But the SECESS alone is flowing in both PO and MIGO.
    Points will be rewarded.
    Thanks in Advance
    Regards
    Dhinakar

    Hi raja,
    h r u???
    I have maintained all the settings, i thuink some note has to be applied. I will check it...
    Thanks for ur Support
    regards
    Dhinakar

  • Excise tab not appearing in MIGO

    Dear All,
    We have some issue in MIGO.
    We have imported a material against a PO and the MIRO is done for customs duty.
    But at the time of doing MIGO customs duty is not capturing. 
    The PO is issue to cost center PO and there is no item no for the PO item. 
    Kindly give some suggestion for the same.
    Regards,
    Mullairaja

    >
    MullaiRaja wrote:
    > Dear All,
    >
    > We have some issue in MIGO.
    >
    > We have imported a material against a PO and the MIRO is done for customs duty.
    >
    >  But at the time of doing MIGO customs duty is not capturing. 
    >
    > The PO is issue to cost center PO and there is no item no for the PO item. 
    >
    > Kindly give some suggestion for the same.
    >
    > Regards,
    > Mullairaja
    While doing MIGO,enter purchase order no.,press enter,Enter correct commerical inv. no & year then
    enter gr qty,tick item ok,press enter,excise tab appears. See customs duties were flowing.
    Hope it solves  problem.

  • Excise Tab not appearing in MIGO Screen but getting posted with EI Entry

    Hi ,
    I am excuting CIN ......While doing MIGO, Excise tab is not apearing nowhere in the MIGO screen but entries are being created successfuly in MIRO and posted as well, Entries ....
                                                           GR/IR Clearing A/c Dr
                                                           RG 23 BED A/c      Dr
                                                           RG 23 Ecess A/c  Dr
                                                           RG 23 SHEcess A/c Dr
                                                           Vendor A/c Cr
    Can any one help me and provide solution for this.
    Thanks
    Sukant

    HI,
    Check your excise group settings, in it check migo settings.
    You need to mark tick in all boxes
    EI capture
    Post EI in MIGO
    Duty differenc at GR
    EI create/RG23D selection
    Update RG1at MIGO
    Also check in J1ID trax for the Po material chapter id is maintained.
    Regards
    KK

  • Excise value not showing in MIGO

    Dear Team
    I am using TAXINN. In PO the condition value which i mentain in FV11 are flowing Like BED,ED CESS,AND SEC ED CESS.
    But in Migo i m able to see only ED Cess.
    Plz give me sloution for this.....Let me know if SAP note Number  is there for SEC ED CESS..
    Thanks in Advance
    Sunil

    Master Note for Budget 2007: 1032265.
    In order to address the u2018Secondary and Higher Education Cessu2019 introduced in the 2006- 2007 Budget on 28.02.2007, SAP has created the master note 1032265.As per the note 1032265, customers have to follow the instructions given in the note 927189, which contains the information about changes to be made to data dictionary, function modules, formulae and programs.

  • Part 1 generated while creating migo but display mode Excise tab not appear

    Hi
    I created migo Part 1 generated. and excise tab also appeared.
    but while display mode Excise tab not appearing. In table J_1part1 Part 1 details are updated.
    Please explain What could be the reason
    Regards
    sitaram

    Hi
    Please any body give me valuable suggesition.
    Thanks and regards
    sitaram

  • Excise tab not appearing for non cenvatable po

    Hi All,
            while doing MIGO , the excise TAB is appearing for cenvatable items.
    but in case of non -cenvatable item this TAB is not appearing in MIGO, is it like this.
    i have maintained in J1ID the excise material type as non-cenvatable. the excise tab is not appearing in MIGO.
    If i want to have excise tab in MIGO for non cenvatable material, what has to be done ?
    pl guide
    regards

    thanks,
          I have maintained every thing, this TAB is coming for cenvatable material, but not coming for non-cenvatable material.
    the material is excisable but we are not taking cenvat credit. so we have maintained it as non-cenvatable in j1id.
    Any reason that for the exciseable material where we are not taking cenvat credit, this TAB is not appearing?
    pl reply
    regards

  • Input Excise SHECess not showing in MIGO & Excise Invoice posting, where I made a mistake ?

    Input Excise SHECess not showing in MIGO & Excise Invoice posting, where I made a mistake ?
    1.At the Time of MIGO,In Excise Invoice tab SECess Hide in reight side of the Screen
    2. At the time of J1IEX, Complete Input Excise SECess Line item is not appere in screen
    Please give the solution
    Regards
    Maran

    Hi,
    Please check following :
    1. Whether the AT1 indicator is active for Excise Registration number under CIN customizing
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Registrations
    2. Whether the AT1 condition is maintained in Maintain Excise Defaults against tax procedure
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Basic Settings --> Determination of Excise Duty --> Maintain Excise Defaults
    3. Whether the AT1 condition is maintained in Specify Excise Accounts per Excise Transaction against excise transaction type
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Account Determination --> Specify Excise Accounts per Excise Transaction
    4. Whether the AT1 G/L account is maintained in Specify G/L Accounts per Excise Transaction
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Account Determination --> Specify G/L Accounts per Excise Transaction
    5. Check whether in condition for AT1 is maintained in FV11.
    6. Check whether AT1 setoff percentage is maintained (this is applicable only in case you maintain setoff conditions).
    7. Check whether AT1 percentage is maintained in conditions tab of Purchase Order.
    8. Check whether tax code is maintained in FV11 for AT1 condition maintained.
    Please check and revert in  case of any clarifications.
    Regards,
    Tejas

  • Excise tab not required in MIGO if  Inventorised tax code is used

    hi expert
    Can we define systen if  if  Inventorised tax code is used ,Excise tab not required in MIGO .
    regard
    Nabil

    Hi,
    as per me excise tab depend on J1ID setting, you know this
    Not on tax code or on condition
    Regards
    Kailas Ugale

  • SCCM 2012 R2 - Software metering Reports Parameters Value not appear to choice

    Hello Every Body
    I hope to get answer as soon as possible
    I have SCCM 2012 R2 & SQL Server 2012 SP1, my problem is ( all software metering Reports Parameters Values Not appear so I cannot select
    Note:-
    ( All parameters Available Value set to Get Values From a Query) 

    Has it been over 45 days since you created the active SWM rules? Do all (most) other SWM reports
    work?
    all other reporting in SWM which doesn't ask for month and year working
    only the problem in year & Month Parameters Values
    note:-
    these reports doesn't need a 45 days to work, alwasy when i install SCCM reports working only from the second day of installation

  • L.C value not appearing in MB51 report

    Dear gurus,
    The l.c value not appearing in MB51 t.code,are there any other reports to see this values if so,plz explain in detail

    Dear Jay,
    It will be available in MB51, may be check your variant for hidden fields or your authorization, You will get in MR51 also
    In Standard SAP System Asset GR will not have any Finance document at the time of Goods Receipt, So you are not getting Amount in LC, If you want to trigger finance document at the time of GR, you have to change the account assignment category A properties like i.e., remove the tick of GR Non valuated  in the below path
    SPRO-->Materials Management-->Purchasing-->Account Assignment-->Maintain Account Assignment Categories, Select A
    Goods receipt made after this change will be triggered the finance document.
    R,
    amala

  • Excise Invoice Tab Page/ Document Info  Tab Page is not appearing in MIGO

    Dear Friend
    For a particular job work PO , with account assignment category F & item category L, non valuaated material, when we are doing migo, excise invoice tab page/ Document Info tab page is not appearing in document header. From The said tab page we can select the challan.
    In J1ID, I have maintained Vendor PAN number and also material chpter id combination.
    Thanks
    Chandra

    Hi
    I maintained material chapter Id combination & vendor Excise Details. We do not maintain any plant -vendor combination. This is a non valuated material with material type unbw. Do I need to maintain cenvat determination tab for this material?
    Thanks
    Chandra

  • In dealer Invoice , Excise duty values not captured from MIGO

    In dealer invoice , I have changed excise duty values in MIGO . This is not captured in MIRO. But the system took excise value from default values ( from FV11 condition record ) . This is happening for New plants.  Old plants works good.
    Regards.,
    Lakshmanan.S

    hi,
    create a PO with zero tax code. such that base amount is equal to the inclusive of all excise duties.
    IN migo select the capture and post excise option, in the excise tab, activate the mrp indicator .
    change the base value in the migo and manually enter the excise duties in migo, capture it and then post
    create MIRO with reference to the PO and give the taxcode as V1(ED-8%CESS-2%HECESS-1%)instead of VO(ZERO TAX CODE)
    Regards,
    velu

Maybe you are looking for