Excise year determination failed for 100 --- Message no. 8I526

Hi All,
I am creating a subcontracting challan. During the creation, I am getting an error "Excise year determination failed for 100 ".
While I was searching for the solution, I found some one has written that,he was also facing same problem (BUT he faced this error while doing GR) after changing the "Storage condition" in the Material.
Kindly let me know what could be the cause for this issue and how it can be resolved. and also pl let me know what is the relationship between "Storage condition" and the "Excise year determination" ?
Thanks in advance......
Regards,

Hi,
In connection with my previous post --- pl note that " his issue got resolved after he changed the storage condition".
Rgds,

Similar Messages

Excise year determination failed for company code

Hi
im getting the following error while trying to post GR.
"Excise year determination failed for company code"
Please help....
regards
ramprakash

HI,
Check the link
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/excise-year-determination-failed-for-company-code-1000-3319164
Regards
KK

Output determination failed for a single customer(order confirm thru mail)

Hi,
i n sales order while we save a confirmation mail goes to cutomer.but in case of one customer it failed in output in edit option it is showing yellow signal and email id also maintained in cutomer master .for all other customer its ok.i m new to this could you plz suggest me and provide me the settings .
Reagrds,
Debesh

Hi Debesh,
Please go to NACE t-code in order to configure output determination, if customer master is ok for output control . in that screen, Firstly you should select V1 output control for order confirmation ,and go in your output condition records for your output control adn create a condition record for your access sequence (ıthink there is no condition record or correct condition records for your specific customer.)
When creating condition records, you should define customer number+ SP- partner function +message trn. medium-5, dispatch time- periodic job, immediate, or etx...
I hope you will solve this proble after output condition records for your spesific customer correctly.
Regards,

Inbound Receipt Acknowledgements fail for CIDX messages

Hi,
We are sending a Load Tender Message (CIDX Message) to our Partner using CIDX receiver adapter with certificate logon and Signing option. For the configuration, our partner is able to receive the messages successfully and sending us the Receipt Acknowledgement.
Receipt Acknowledgement is received in our system but it is failing when it is validating the Signal message.
Find below the error prompted in Message Monitoring System:
1. Attempt to validate RNIF signal message failed. Message will be ignored -
null
2. Error during message processing -
BTD handler indicated processing error
3. Delivery of the message to the application using connection CIDXAdapter failed, due to: Error during message processing.
Please provide me the resolution to solve the issue.
Thanks & Regards,
Suraj Kumar

Hi Suraj,
We are facing with similar error, can you please help me out. Thank you.
Please let us know how you have solved the issue. Appreciate your help in this regard.
Thanks,
Sudheer

Complex interface determination fails for 0-N mappings

We have a mapping question for the following scenario in PI 7.1: One message needs to be mapped into two target structures, it comes from the same sender and goes to same receiver. We need to call two different BAPI in the same SAP end system simultaneously.
This is set up in one interface determination (same sender & receiver) where we use two different operation mappings with different receiver interface names. If the mapping have multiplicity 1, everything works fine and the message gets mapped to both receiver interfaces simultaneously. But, when the multiplicity of the mappings is 0-N (split mapping), then we get error message during interface determination phase:
Error when determining the inbound interface: Inbound interface found several times (for same sender and receiver) for the outbound interface http://sending/namespace.sndInterfaceName
How can we set up our scenario with two 0-N mappings without getting error message? One option would be combining two mappings in one, but this can not work in our case because of the high complexity.
Any comments appreciated. Thanks, Sanjay.
Edited by: Sanjay Gupta on Oct 21, 2010 10:50 PM

Thanks for taking the time to look into this. See my comments below.
1. Are you using multi mapping? Source Message type 1 and Traget message types 2 (added from messages tab in the mapping)
We have two mappings, both create only a single output type, however, they are split mappings, meaning the mapping result message multiplicity is 0-N. So the answer is NO, this are no multi mappings
2. At any time, can both the target messages be created or are they mutually exclusive?
both targets will always be created, they are NOT mutually exclusive
3. With in each message type that gets generated on the target side, is the occurance 1..1 or 1..unbounded?
Don't fully get the question, but I assume you ask if the mapping is defined as a 1:1 or 1..N mapping. The latter is true.
4. Is there any condition in the interface determination?
Answer is No.
5. How many operation mappings did you design.
We have two operation mappings, each containing a different mapping to the different receiver interface type.
Being said that, the ideal way should be, You need to create only one message mapping by adding multiple message types on the target side. I fully understand and agree with this statement, but due to the complexity of the mapping we need to separate it out into two mappings.
It is confusing, that the described scenario works if the multiplicity of the mapping objects used is 1, but as soon as the multiplicity is 0-N (when using a split mapping instead), we start getting the error message.

Mapping Runtime failing for all messages

Hi Experts,
We are facing an issue with our mapping runtime in the integration engine. Any message going through the integration engine is giving a mapping error as shown below (for example):
LinkageError during appliction Java mapping com/sap/xi/tf/_MessageAcknowledgement_to_Order_Responce_ERP_Async_In_ Thrown: java.lang.NoClassDefFoundError: com/sap/aii/utilxi/threadutil/ThreadUtil_map
LinkageError during appliction Java mapping com/sap/xi/tf/_MM_Jdbc_test_ Thrown: java.lang.NoClassDefFoundError: com/sap/aii/utilxi/threadutil/ThreadUtil_map
The complete trace of the error is attached here.
The interfaces were working and messages were flowing normally. As part of our SAP HCM to SuccessFactors implementation, we configured 3 interfaces and even this was working fine. To solve a specific issue during implementation, we applied the following SAP notes:
1869807 - SFSFI: PI Content Correction for HTTP Cookie Handling
Pre-requisite for above note - 1838921 - Multiple cookies in HTTP Header
After this, messages of all the interface in this system are failing with the above issue (LinkageError).
Please guide us in resolving this issue.
Thanks & Regards
Sudheer

Hi All,
In addition to the above, if mapping is tested within ESR there is no issue. The problem is happening only during runtime.
BTW, When we applied the note 1838921 we upgraded the Adapter Framework from SP09 to SP12.
Could this be an issue?
Regards,
Sudheer

Bought one year of minutes for $100, why do I need to add more in 6 months?

I recently purchased a Verizon pre-paid, along with $100 of minutes that were to last for a year. When I check my balance it says I need to add more by October, approx. 6 months from initial purchase. I won't need more by then as the phone is hardly used. Anyone know the deal on this?

I truly appreciate you taking the time to reach out! I want to thank you for using Verizon Wireless prepay services. To ensure that you're concern is properly address, please reach out to our prepay specialist.
To reach our Prepay Team, please dial 888-294-6804 from a number other than your prepaid phone. When prompted, enter your prepaid phone number. Then press 4 (for questions or to change something), then 5 (for Store Locations or Billing Questions), then 4 (for Customer Service Rep) and then enter your pass code for your account. If you do not know the pass code enter in four zeros. Then the system will transfer you to a Prepaid representative. You may also dial *611 from your Verizon Wireless prepaid device to reach a representative.
YosefT_VZW
Follow us on Twitter @VZWSupport

Wsdl validation fails for request message payload from custom schema

Hello. I am having a problem which I cannot seem to work around. I have defined a schema to serve as a template for the request message payload of a bpel process. The schema is very simple:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:logininfo="http://sru/logininfo" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:sru="http://sru/profile" targetNamespace="http://sru/logininfo" elementFormDefault="qualified" attributeFormDefault="unqualified">
     <xs:import namespace="http://sru/profile" schemaLocation="http://sru/profile.xsd"/>
     <xs:element name="logininfo" type="logininfo:logininfoType">
          <xs:annotation>
               <xs:documentation>Needed information for SRU Login</xs:documentation>
          </xs:annotation>
     </xs:element>
     <xs:complexType name="logininfoType">
          <xs:all>
               <xs:element name="email" type="sru:emailType"/>
               <xs:element name="password">
                    <xs:simpleType>
                         <xs:restriction base="xs:string">
                              <xs:maxLength value="32"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:element>
               <xs:element name="product" type="xs:string"/>
               <xs:element name="ip" type="sru:ipType"/>
               <xs:element name="timestamp" type="xs:dateTime"/>
               <xs:element name="xpath" type="xs:string"/>
          </xs:all>
     </xs:complexType>
</xs:schema>
(The schema depends on another, which I have placed at the end of this message).
I import it into the bpel process designer with no problems.
Upon defining the payload of the request message type to be the {http://sru/logininfo}logininfoType, the WSDL file does not validate anymore:
Validating WSDL...
Validating E:\OraBPELPM_1\integration\jdev\jdev\mywork\SRU\BPELProcess5\BPELProcess5.wsdl
Schema type not found: QName(http://sru/logininfo, logininfoType)
Validate WSDL: has errors.
Any ideas?
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns="http://sru/profile" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:sru="http://sru" xmlns:xdb="http://xmlns.oracle.com/xdb" targetNamespace="http://sru/profile" elementFormDefault="qualified" attributeFormDefault="unqualified" xdb:schemaURL="http://sru/profile.xsd">
     <xs:annotation>
          <xs:documentation>Joel SalmerÃ³n Viver</xs:documentation>
          <xs:documentation xml:lang="en">General purpose internet profile schema</xs:documentation>
     </xs:annotation>
     <xs:simpleType name="emailType">
          <xs:restriction base="xs:string">
               <xs:maxLength value="255"/>
               <xs:pattern value="[a-z0-9]([a-z0-9\._][a-z0-9]+)*@[a-z0-9]([a-z0-9\.\-][a-z0-9]+)*\.[a-z]{2,6}"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="ipType">
          <xs:restriction base="xs:string">
               <xs:pattern value="((\d|[1-9]\d|1\d\d|2[0-4]\d|25[0-5])\.){3}(\d|[1-9]\d|1\d\d|2[0-4]\d|25[0-5])"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:simpleType name="labelType">
          <xs:restriction base="xs:string">
               <xs:maxLength value="32"/>
          </xs:restriction>
     </xs:simpleType>
     <xs:complexType name="addressType" xdb:SQLType="ADDRESSTYPE" xdb:SQLSchema="SRU">
          <xs:all>
               <xs:element name="lines" type="linesType" minOccurs="0" xdb:SQLName="lines" xdb:SQLType="LINESTYPE" xdb:SQLSchema="SRU" xdb:SQLInline="true">
                    <xs:key name="linesKey">
                         <xs:selector xpath="line"/>
                         <xs:field xpath="@num"/>
                    </xs:key>
               </xs:element>
               <xs:element name="city" xdb:SQLName="city" xdb:SQLType="VARCHAR2" xdb:SQLInline="true">
                    <xs:simpleType>
                         <xs:restriction base="xs:string">
                              <xs:maxLength value="64"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:element>
               <xs:element name="postalcode" xdb:SQLName="postalcode" xdb:SQLType="VARCHAR2" xdb:SQLInline="true">
                    <xs:simpleType>
                         <xs:restriction base="xs:string">
                              <xs:maxLength value="16"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:element>
               <xs:element name="countrycode" xdb:SQLName="countrycode" xdb:SQLType="VARCHAR2" xdb:SQLInline="true">
                    <xs:simpleType>
                         <xs:restriction base="xs:string">
                              <xs:length value="2"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:element>
          </xs:all>
          <xs:attribute name="label" type="labelType" use="required" xdb:SQLName="label" xdb:SQLType="VARCHAR2"/>
          <xs:attribute name="verified" type="xs:boolean" use="required" xdb:SQLName="verified" xdb:SQLType="RAW"/>
     </xs:complexType>
     <xs:complexType name="lineType" xdb:SQLType="LINETYPE" xdb:SQLSchema="SRU">
          <xs:simpleContent>
               <xs:extension base="xs:string">
                    <xs:attribute name="num" type="xs:positiveInteger" use="required" xdb:SQLName="num" xdb:SQLType="NUMBER"/>
               </xs:extension>
          </xs:simpleContent>
     </xs:complexType>
     <xs:complexType name="loginType" xdb:SQLType="LOGINTYPE" xdb:SQLSchema="SRU">
          <xs:all>
               <xs:element name="registered_date" type="xs:dateTime" xdb:SQLType="TIMESTAMP WITH TIME ZONE" xdb:SQLName="registered_date" xdb:SQLInline="true"/>
               <xs:element name="lastlogin_date" type="xs:dateTime" xdb:SQLType="TIMESTAMP WITH TIME ZONE" xdb:SQLName="lastlogin_date" xdb:SQLInline="true"/>
               <xs:element name="lastlogin_ip" type="ipType" minOccurs="0" xdb:SQLName="lastlogin_ip" xdb:SQLType="VARCHAR2" xdb:SQLInline="true"/>
               <xs:element name="lastlogin_time" type="xs:time" minOccurs="0" xdb:SQLType="TIMESTAMP WITH TIME ZONE" xdb:SQLName="lastlogin_time" xdb:SQLInline="true"/>
          </xs:all>
          <xs:attribute name="product" use="required" xdb:SQLName="product" xdb:SQLType="VARCHAR2">
               <xs:simpleType>
                    <xs:restriction base="xs:string">
                         <xs:maxLength value="32"/>
                    </xs:restriction>
               </xs:simpleType>
          </xs:attribute>
          <xs:attribute name="status" type="xs:integer" use="required" xdb:SQLName="status" xdb:SQLType="NUMBER"/>
     </xs:complexType>
     <xs:complexType name="addressesType" xdb:SQLType="ADDRESSESTYPE" xdb:SQLSchema="SRU">
          <xs:sequence>
               <xs:element name="address" maxOccurs="unbounded" xdb:defaultTable="PROFILE_ADDRESSES" xdb:SQLName="address" xdb:SQLSchema="SRU" xdb:SQLInline="true" xdb:defaultTableSchema="SRU" xdb:SQLCollType="address360_COLL" xdb:SQLCollSchema="SRU" xdb:maintainOrder="false">
                    <xs:complexType xdb:SQLType="address358_T" xdb:SQLSchema="SRU">
                         <xs:complexContent>
                              <xs:extension base="addressType"/>
                         </xs:complexContent>
                    </xs:complexType>
               </xs:element>
          </xs:sequence>
          <xs:attribute name="main" type="labelType" use="required" xdb:SQLName="main" xdb:SQLType="VARCHAR2"/>
     </xs:complexType>
     <xs:complexType name="phonesType" xdb:SQLType="PHONESTYPE" xdb:SQLSchema="SRU">
          <xs:sequence>
               <xs:element name="phone" type="phoneType" maxOccurs="unbounded" xdb:SQLName="phone" xdb:SQLType="PHONETYPE" xdb:SQLSchema="SRU" xdb:SQLInline="true" xdb:SQLCollType="phone363_COLL" xdb:SQLCollSchema="SRU" xdb:maintainOrder="false"/>
          </xs:sequence>
          <xs:attribute name="main" type="labelType" use="required" xdb:SQLName="main" xdb:SQLType="VARCHAR2"/>
     </xs:complexType>
     <xs:complexType name="loginsType" xdb:SQLType="LOGINSTYPE" xdb:SQLSchema="SRU">
          <xs:sequence>
               <xs:element name="login" type="loginType" maxOccurs="unbounded" xdb:SQLName="login" xdb:SQLType="LOGINTYPE" xdb:SQLSchema="SRU" xdb:SQLInline="true" xdb:SQLCollType="login366_COLL" xdb:SQLCollSchema="SRU" xdb:maintainOrder="false">
                    <xs:key name="loginKey">
                         <xs:selector xpath="."/>
                         <xs:field xpath="@product"/>
                    </xs:key>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
     <xs:complexType name="phoneType" xdb:SQLType="PHONETYPE" xdb:SQLSchema="SRU">
          <xs:simpleContent>
               <xs:extension base="phonenumberType"/>
          </xs:simpleContent>
     </xs:complexType>
     <xs:complexType name="profileType" xdb:SQLType="PROFILETYPE" xdb:SQLSchema="SRU">
          <xs:all>
               <xs:element name="firstname" xdb:SQLName="firstname" xdb:SQLType="VARCHAR2" xdb:SQLInline="true">
                    <xs:simpleType>
                         <xs:restriction base="xs:string">
                              <xs:maxLength value="64"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:element>
               <xs:element name="surname1" xdb:SQLName="surname1" xdb:SQLType="VARCHAR2" xdb:SQLInline="true">
                    <xs:simpleType>
                         <xs:restriction base="xs:string">
                              <xs:maxLength value="64"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:element>
               <xs:element name="surname2" minOccurs="0" xdb:SQLName="surname2" xdb:SQLType="VARCHAR2" xdb:SQLInline="true">
                    <xs:simpleType>
                         <xs:restriction base="xs:string">
                              <xs:maxLength value="64"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:element>
               <xs:element name="gender">
                    <xs:simpleType>
                         <xs:restriction base="xs:string">
                              <xs:length value="1"/>
                              <xs:enumeration value="M"/>
                              <xs:enumeration value="F"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:element>
               <xs:element name="alt_email" type="emailType" minOccurs="0" xdb:SQLName="alt_email" xdb:SQLType="VARCHAR2" xdb:SQLInline="true"/>
               <xs:element name="addresses" type="addressesType" minOccurs="0" xdb:SQLName="addresses" xdb:SQLType="ADDRESSESTYPE" xdb:SQLSchema="SRU" xdb:SQLInline="true">
                    <xs:key name="addressesKey">
                         <xs:selector xpath="address"/>
                         <xs:field xpath="@label"/>
                    </xs:key>
                    <xs:keyref name="addressRef" refer="addressesKey">
                         <xs:selector xpath="."/>
                         <xs:field xpath="@main"/>
                    </xs:keyref>
               </xs:element>
               <xs:element name="phones" type="phonesType" minOccurs="0" xdb:SQLName="phones" xdb:SQLType="PHONESTYPE" xdb:SQLSchema="SRU" xdb:SQLInline="true">
                    <xs:key name="phoneKey">
                         <xs:selector xpath="phone"/>
                         <xs:field xpath="@label"/>
                    </xs:key>
                    <xs:keyref name="phoneRef" refer="phoneKey">
                         <xs:selector xpath="."/>
                         <xs:field xpath="@main"/>
                    </xs:keyref>
               </xs:element>
               <xs:element name="language" type="xs:language" xdb:SQLName="language" xdb:SQLType="VARCHAR2" xdb:SQLInline="true"/>
               <xs:element name="logins" type="loginsType" minOccurs="0" xdb:SQLName="logins" xdb:SQLType="LOGINSTYPE" xdb:SQLSchema="SRU" xdb:SQLInline="true">
                    <xs:key name="loginsKey">
                         <xs:selector xpath="login"/>
                         <xs:field xpath="@product"/>
                    </xs:key>
               </xs:element>
               <xs:element name="origin" minOccurs="0" xdb:SQLName="origin" xdb:SQLType="VARCHAR2" xdb:SQLInline="true">
                    <xs:annotation>
                         <xs:documentation>iso3166 a2 country code</xs:documentation>
                    </xs:annotation>
                    <xs:simpleType>
                         <xs:restriction base="xs:string">
                              <xs:length value="2"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:element>
               <xs:element name="creation_date" type="xs:dateTime" xdb:SQLType="TIMESTAMP WITH TIME ZONE" xdb:SQLName="creation_date" xdb:SQLInline="true"/>
               <xs:element name="modified_date" type="xs:dateTime" xdb:SQLType="TIMESTAMP WITH TIME ZONE" xdb:SQLName="modified_date" xdb:SQLInline="true"/>
               <xs:element name="password" xdb:SQLName="password" xdb:SQLType="VARCHAR2" xdb:SQLInline="true">
                    <xs:simpleType>
                         <xs:restriction base="xs:string">
                              <xs:maxLength value="32"/>
                              <xs:pattern value="[a-zA-Z0-9]+"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:element>
               <xs:element name="hint" minOccurs="0" xdb:SQLName="hint" xdb:SQLType="VARCHAR2" xdb:SQLInline="true">
                    <xs:simpleType>
                         <xs:restriction base="xs:string">
                              <xs:maxLength value="32"/>
                         </xs:restriction>
                    </xs:simpleType>
               </xs:element>
               <xs:element name="additional" type="xs:anyType" minOccurs="0">
                    <xs:annotation>
                         <xs:documentation>future expansion</xs:documentation>
                    </xs:annotation>
               </xs:element>
          </xs:all>
          <xs:attribute name="email" type="emailType" use="required" xdb:SQLName="email" xdb:SQLType="VARCHAR2"/>
          <xs:attribute name="active" type="xs:boolean" use="required"/>
     </xs:complexType>
     <xs:complexType name="phonenumberType" xdb:SQLType="PHONENUMBERTYPE" xdb:SQLSchema="SRU">
          <xs:simpleContent>
               <xs:extension base="xs:string">
                    <xs:attribute name="label" type="labelType" use="required" xdb:SQLName="label" xdb:SQLType="VARCHAR2"/>
               </xs:extension>
          </xs:simpleContent>
     </xs:complexType>
     <xs:element name="profile" type="profileType" xdb:defaultTable="PROFILES" xdb:SQLName="profile" xdb:SQLType="PROFILETYPE" xdb:SQLSchema="SRU" xdb:defaultTableSchema="SRU"/>
     <xs:complexType name="linesType" xdb:SQLType="LINESTYPE" xdb:SQLSchema="SRU">
          <xs:sequence>
               <xs:element name="line" type="lineType" maxOccurs="unbounded" xdb:SQLName="line" xdb:SQLType="LINETYPE" xdb:SQLSchema="SRU" xdb:SQLInline="true" xdb:SQLCollType="line354_COLL" xdb:SQLCollSchema="SRU" xdb:maintainOrder="false"/>
          </xs:sequence>
     </xs:complexType>
</xs:schema>

IT would help if the people that are working this issue would post the resolve of their problems. Every post I see with this problem someone from oracle replies with needing the source project to replicate the issue and the thread dies....

Agent determination failed in Standard Workflow.

Hi Experts,
I am new to workflow and we are trying to implement the standard HCM process of Transfer.
The worflow is giving this error.
Error when processing node "000000032"
which further says Agent determination failed for step "000000032"
Pls help and guide what can be done to resolve it.
We have checked the Org Structure.
Regards,
SV

Hi,
Thank you for your reply,
Which std workflow you are using ?
We are using the WF WS17900427.
Are you using portal to trigger the workflow and webdynpro screen for approval or adobe form for approval ?
Yes
If the agend resolution is getting failed. What role number ?
Rule ID 17900012.
Have your tested individually from PFAC t-code. Is it giving the correct agent from there. check from there.
Testing individually (onclick of Stimulate rule resolution).
Runtime Error MOVE_CAST_ERROR
Exception CX_SY_MOVE_CAST_ERROR
Regards,
Sanjyoti.

Server Error In '/' Application - Login failed for user xyz ...

Hi, I'm brand new here
I would be ever grateful for help on this. It's probably something simple.
I'm coding a website in C# ASP.NET (http://project.arcza.net). There is a registration page where you send your email, username all that stuff to an SQL server. The SQL server runs on my IIS server too. On Visual Studio, I can debug the website (i.e. launch
it on localhost:12345) and I get a fully working website that I can register as a user and it injects into the SQL server's table. If I query the SQL server, I see the results. So it works fine here.
The problem: if I copy the files for the website into the live IIS directory (as opposed from the Visual Studio preview environment) I get a runtime error thing, I have no idea what this means. The live IIS folder is project.arcza.net and I have disabled
security so you can see the full workings of the probem.
It says login failed for user 'pap'. Pap is a user I have added in SQL server, with username pap and password pap. The credentials are correct. I have added a 'connection string' (I have very little idea what this is) with thees credentials for an SQL server
@ localhost, in IIS manager.
Thank you and if you have any idea I'd be very happy.
I should also point out that if I edit properties of pap in SQL server's login thing where it lists the accounts, I cannot save the settings (you know the ones where you give it permissions to access, delete, etc?) I can tick them and click okay but if I
reoped properties and click on (I think off the top of my head it's called 'securities' but I may be wrong, it's 2nd from the bottom of the pane on the left) I see the tickboxes remain unticked. Could this have something to do with the "login failed for
'pap'" message I'm seeing?

Have a look at
Errorlog. you should get reason of login failed for user.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

PR Overall Release Workflow - Agents Determination Failed

Dear All WF Experts,
I have used the standard workflow WS20000077 for PR Overall Release. I have assigned the agents to the task TS20000159 by position maintained in the Workflow Organizational Management Structure. The agents' names are showing correctly in the task's agent settings.
However, when I execute the workflow, the error 'Agent Determination Failed' for that step (TS20000159). I have checked the agent settings in workflow and SPRO, they look fine. Could anyone please kindly give me advices how to solve this error? Thank you so much.

Hi, to all the experts who have helped me all these while,
Thank you very much for spending time helping me to go through this issue.
Yesterday, I ran through the coding for the function module for the rule AC20000026 again. I found out that there is one part of the coding which is causing the failure of determining an agent. The code disregard the company code for overall release of Purchase Requisition while the business requirement involves company codes in every PR created. Thus, by changing that code, the problem is solved.
The snippet of code of function module (ME_REL_GET_RESPONSIBLE):
   CASE t16fc-frgwf.
* keine Ermittlung
      WHEN space.
        RAISE nobody_found.
* Ermittlung ¨¹ber T16fW
      WHEN '1'.
        IF eban-gsfrg EQ space.
*     Einzelpositionsfreigabe Banf
          SELECT SINGLE * FROM t16fw WHERE frggr = eban-frggr
                                       AND frgco = rm06b-frgab
                                       AND werks = eban-werks.
        ELSE.
*     Gesamtfreigabe Banf
          SELECT SINGLE * FROM t16fw WHERE frggr = eban-frggr
                                       AND frgco = rm06b-frgab
                                       AND werks = space.
There is always a value in werks in my business scenario...
SELECT SINGLE * FROM t16fw WHERE frggr = eban-frggr
                                       AND frgco = rm06b-frgab
                                       AND werks = space.
So, by changing it to
AND werks = eban-werks
it will work, however, I think it's better to just remove the If statement
IF eban-gsfrg EQ space.
, since it has no effect anymore.
I hope this would give a hint to all the rest who might be facing the same problem as well.
Thank you very much,
YL

Best Buy 100% Price Match Guarantee FAIL for Elite Plus member!!!

So during the Black Friday weekend I purchased a Dyson vacuum at a store. I understand that Best Buy does not match pricing DURING Black Friday weekend. So on 12/15 Amazon had the vacuum on sale for $26 less than what I paid. Again, this is not Black Friday weekend but the item was purchased over Black Friday weekend. So I called in for Best Buy to match the price. I spoke with someone who seemed like temp help. It did not sound like she was in a call center and she didn't know much and seemed to be IM'n with someone to get answers. After initially telling me they would not match the price because the item was purchased during Black Friday I explained that it was no longer Black Friday and Best Buy policy does not obsolve them from matching prices for the next 5-6 weeks (the return date is 1/15/2015) from all items purchased over Black Friday weekend. If so, no one would buy during Black Friday. She said she would submit the price match and I would get an email letting me know if it has been approved. I was patient and waited 2 weeks and nothing. I called back and was told that the price match department was swamped and to please be patient. So I waited till today to call back for the return date is in 2 days and still no price match email. I am now being told that Best Buy only matches their own pricing if not at the time of sale AND they only match the price that same day when they can confirm the price. (which makes sense) I'm also being told my price match was never sent to the correct department so it has been sitting in case # purgatory for the past month. Why is any of this my fault?! I spend over $3500 per year, year after year and I'm supposed to get 'Elite' service. I know more than the people I'm speaking with on the phone! I called in with a legit lower price, waited patiently for Best Buy to match, have now spoken with 3 different reps, been told something different each time about the price match policy (every time they were wrong) and now I'm being told because it wasn't matched when they could confirm the price they won't match the price?! What am I missing?!
Total Price Match FAIL for Elite Plus member!!! I can only image how people that aren't Elite are treated! :-)

Dear iamkraz,
Thank you for bringing us your business this holiday and for your continued loyalty to us as a My Best Buy Elite Plus customer. I am sorry if your recent experience has left you disappointed after the service you received. I would be happy to help clarify this for you.
Per our Price Match Guarantee, “At the time of sale, we price match all local retail competitors (including their online prices) and we price match products shipped from and sold by these major online retailers: Amazon.com, Bhphotovideo.com, Crutchfield.com, Dell.com, HP.com, Newegg.com, and TigerDirect.com.” The only price match we would perform after the initial time of sale would be to a lower price in store or on BestBuy.com during your respective Return & Exchange period. You should have been provided with this as the reason for not receiving the price match when you were speaking with our support teams.
My apologies for any confusion this caused. I would like to get some more details from you about the conversations you had so I may properly document this here at the corporate level for coaching and training. Please check your private messages by clicking on the envelope in the upper right-hand corner while you are logged into the forums.
Regards,
JD|Social Media Specialist | Best Buy® Corporate
Private Message

Error in ALE service 29 Could not determine recipients for message type MAT

Hi Experts,
While transferring the material using ALE am getting error 29 ie 'Error in ALE service' and message is 'Could not determine recipients for message type MATFET'.
Also i ve recieved the materials with the proper status al the end am getting the above error.
Kindly help me out.
Thanks in advance.

Hi ,
Status 29 means " partner profile not found " . Please check if the recieving partner is configured properly in WE20 in sender system.
Also make sure that the Port and RFC definations are also completed. If the IDoc is manually triggered then please make sure that control record parameters of the idoc are properly filled - if we miss the details ( like wrong port given , wrong basic type for message type - or extended message type ) then also the idoc will fail in status 29 even though the partner profile is properly configured .
Since your idoc is getting generated i think no issues with BD64 since already interested recipeints were populated in control record of idoc.
Regards
Vikas Chaudhary

Failed to start message bus: Could not get UID and GID for username "d

Today ive updated my system and got this mesage on boot
Failed to start message bus: Could not get UID and GID for username "dbus"
My keyboard doesnt work..not on usb or ps2.
After 2 years over using arch on stable repo i got this very ugly bug...S***
ill use minimal cd to reinstall core...it seems i cant get on tty working

phoenix, don't post in old threads: http://wiki.archlinux.org/index.php/For … Bumping.27
Try reinstalling dbus-core - if that doesn't work, start a new thread.
Closed.

Nokia 100 - Message Sending Failed

Newbie mobile user, with Nokia 100 on Orange PAYG in the UK.
Trying to send my first text message, the display shows "Message Sending Failed". Not sure if it's just me still finding my way round and not getting something quite right, or if there's something wrong and I need to change some setting or other?
I've looked around and it seems maybe it might be something to do with a message centre number? I saw an Orange support page here for Nokia
http://help.orange.co.uk/orangeuk/support/personal/401305
with some instructions, but I'm not seeing what they give in bold so maybe the Nokia 100 has different menu/options/settings, and it isn't included in the list to the right of the help topic. I've also scanned Nokia help topics but again haven't seen anything specific to the Nokia 100 for this error message. There also doesn't seem to be a comprehensive manual for the 100, only a fairly basic user guide -- for other models there's a lot more detail about errors and troubleshooting.
Any help appreciated... and please keep it simple
Solved!
Go to Solution.

Many thanks puigchild, but this...
Messaging > Message settings (or msg. settings) > Text messages > Message centres
is what I don't seem to see.
From the main Menu I have these choices:
Messages, Contacts, Call register, Settings, Clock, Radio, Reminders, Games, Extras, Orange Plus.
I've been two ways from there...
(1) Messages, where the options are:
Create Message, Inbox, Sent Items, Drafts, Chat, Picture messages, Distribution lists , Screened messages, Delete messages, Message counter, Message settings, Service com. editor.
The only possibility from these (and in line with what you suggested) seems to be Message settings, and the options there are:
Templates, Smileys, Signature, Sending profile, Font size, Delivery Reports, Reply via same centre, Character support, No. screening.
It doesn't seem clear where to go next from these choices... from what I've seen from looking around, and again from what you've said, there should be an option for Text Messages, but there doesn't seem to be
The only reference to a "centre" anywhere is in the option for "Reply via same centre", but I don't know what that means!
(2) Settings (from the main menu), and the options there are:
Tone settings, Display settings, Profiles, Time settings, Call settings, Phone settings, Cost settings, Security settings, Go to settings, Restore factory settings.
Again I haven't been sure where to go but have explored a few and haven't found anything yet about Message Centre or specifically about text messages.

Excise year determination failed for 100 --- Message no. 8I526

Similar Messages

Maybe you are looking for