Excite 10 dribbling Away Available Memory
I have an Excite 10 16gb Tablet. It loses available memory with every use, even if wifi & bluetooth were Off. Several hundred megabytes become unusable with each use, even when NO apps are added, data in form of pictures, videos or documents are created or stored. The sum total of the files and apps using "Storage" in Settings is about 2.7 gb. It says Total space is 12.56gb. but says only .93 gb is Available EVEN THOUGH the bar graph shows about 3/4's of the space is available.(This shows about 9 gb free, but the tab data below says .93 gb or 930 mb) and tabulated numbers for the external SD card all agree. I've watched this available memory steadily decrease especially once it went below 7.0 gb. It's the internal memory (SD Card) that's screwed up. I've gone through this cycle once already. It eventually will go down to only a 100 or so mb available and basically stop working. I factory reset. Reloaded apps and transfered Some data back on to the device and carefully tracked my internal storage with both the Andorid Settings and "File Expert HD"--a 3rd party file manager. For every app installed, and every picture taken or stored, every document created, etc. It's like the device uses memory for temp storage/stystem uses but never releases it when it's finished.
ICS 4.0.3 (as received from factory) AT300 (from Settings/About Tablet Model Number BUT BOX Tag says AT305, Box and internal serial numbers agree)
Kernal and Build number available if needed fromSettings/Device/About Tablet
I understand Apps store Data and have caches. Using Settings/Apps and adding the data for EVERY APP I am still WAY UNDEr 3 gb of Apps, App Data AND CACHES, and user Data (files, pictures, videos, music, yada yada)
Help!
If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777 or locate a service provider.
- Peter
Similar Messages
-
I am losing available memory on my iPad (64 GB 3rd gen) and it appears to lose memory because some TV shows that I have downloaded from iTunes are appearing twice in my downloads. Both download, but when Only appear as 1 show on my "videos". After viewing the show, I delete, but the duplicate show appears to be still there somewhere (not visible anywhere) taking up the same amount of memory that showed before downloading. It reduces my available memory to download other shows. The general settings do not show any of these phantom shows taking any memory, but the total available is much, much less than what is showing for all usage such as music, videos, photos, apps, etc
Is it possible to delete a show from the download portion of iTunes if you have already seen a show and do not want to waste time or memory downloading again? The only way that I know is to let it download completely and the delete from "Videos".John0618. Did you ever get a response or solution to problem? I have the same problem (starting about three months ago).
-
Hello,
My MacBook is running super slow. I downloaded Memory Clean from the App Store and I regularly have 15MB or free memory available.
In Activity Monitor I usually see the following:
~800 MB kernel_task
~500 MB softwareupdated
~500 MB Image Capture Extension
In Console, I see mdworker.bundle errors attributed to UID's: 501, 503, 1422
My current UID from what I can tell is 502. Other UID's left over from various upgrades are 89, 99, 235.
Lastly, Drive Genius is giving me a Drive Integrity Warning. But I can't create a bootable clone.
I have no idea if the above problems are related. I'd like to think I just run a lot of stuff that eats my memory and upgrading the RAM would be the easy path. What say you all?
-Jeff
Problem description:
I regularly have 15 MB of Available Memory - Should I upgrade or is there an issue I should solve first?
EtreCheck version: 2.1.8 (121)
Report generated February 27, 2015 at 1:42:38 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (17-inch, Late 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,3
1 2.5 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 412
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1920 x 1200
AMD Radeon HD 6770M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 11 days 16:29:20
Disk Information: ℹ️
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (73.11 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Boom.app
[not loaded] com.globaldelight.driver.BoomDevice (1.1 - SDK 10.9) [Click for support]
/Applications/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.4) [Click for support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.hypervisor (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.netbridge (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.usbconnect (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.vnic (9.0 24237.1028877) [Click for support]
/Applications/VMware Fusion.app
[not loaded] com.vmware.kext.vmci (90.5.7) [Click for support]
[not loaded] com.vmware.kext.vmioplug.12.1.17 (12.1.17) [Click for support]
[not loaded] com.vmware.kext.vmnet (0188.79.83) [Click for support]
[not loaded] com.vmware.kext.vmx86 (0188.79.83) [Click for support]
[not loaded] com.vmware.kext.vsockets (90.5.7) [Click for support]
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.xpc.loginitemregisterd.plist
4 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.GSSCred.plist
[killed] com.apple.ifdreader.plist
[failed] com.apple.loginwindow.LFVTracer.plist
[killed] com.apple.nesessionmanager.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.xpc.smd.plist
8 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.bjango.istatmenusagent.plist [Click for support]
[running] com.bjango.istatmenusnotifications.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.[redacted].UpdatePodcastsAgent.plist [Click for support]
[unknown] ~ [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.backblaze.bzserv.plist [Click for support]
[running] com.bjango.istatmenusdaemon.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Click for support]
[loaded] com.prosofteng.DriveGenius.locum.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.akamai.client.plist [Click for support]
[running] com.akamai.single-user-client.plist [Click for support]
[running] com.backblaze.bzbmenu.plist [Click for support]
[loaded] com.divx.agent.postinstall.plist [Click for support]
[running] com.ecamm.printopia.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
[running] com.prosofteng.DGMonitor.plist [Click for support]
[running] ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
Dropbox Application Hidden (/Applications/Dropbox.app)
Fantastical Application Hidden (/Applications/Fantastical.app)
TextExpander Application Hidden (/Applications/TextExpander.app)
HazelHelper Application Hidden (/Users/[redacted]/Library/PreferencePanes/Hazel.prefPane/Contents/MacOS/HazelH elper.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Google Earth Web Plug-in: Version: 6.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.3.1.3 - SDK 10.8 [Click for support]
OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
npP3Remote: Version: 0.3 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
DivXBrowserPlugin: Version: 2.2 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
BrowserPlus_2.9.8: Version: 2.9.8 [Click for support]
CitrixOnlineWebDeploymentPlugin: Version: 1.0 [Click for support]
WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
Safari Extensions: ℹ️
1Password
FastestTube
DivX Plus Web Player HTML5 <video>
Open in Internet Explorer
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences [Click for support]
Backblaze Backup [Click for support]
BrowserPlus [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Hazel [Click for support]
Logitech Control Center [Click for support]
MacFUSE [Click for support]
Printopia [Click for support]
Xmarks for Safari [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 748.93 GB Disk used: 675.81 GB
Destinations:
Time Machine [Local]
Total size: 999.85 GB
Total number of backups: 49
Oldest backup: 2014-10-30 20:23:53 +0000
Last backup: 2015-02-26 13:07:38 +0000
Size of backup disk: Too small
Backup size 999.85 GB < (Disk used 675.81 GB X 3)
Top Processes by CPU: ℹ️
12% WindowServer
7% bzfilelist
1% loginwindow
1% Dropbox
0% bztransmit
Top Processes by Memory: ℹ️
361 MB bztransmit
326 MB Finder
206 MB Safari
163 MB WindowServer
146 MB Console
Virtual Memory Information: ℹ️
647 MB Free RAM
2.99 GB Active RAM
2.45 GB Inactive RAM
1.67 GB Wired RAM
10.17 TB Page-ins
6.32 GB Page-outs
Diagnostics Information: ℹ️
Feb 27, 2015, 09:46:13 AM /Users/[redacted]/Library/Logs/DiagnosticReports/helpd_2015-02-27-094613_[redac ted].crashOk.
I think that got it all. Anything else you see?
Problem description:
Uninstalled CleanMyMac2
EtreCheck version: 2.1.8 (121)
Report generated February 27, 2015 at 3:31:40 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (17-inch, Late 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,3
1 2.5 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 412
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1920 x 1200
AMD Radeon HD 6770M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:51:42
Disk Information: ℹ️
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (76.14 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Boom.app
[not loaded] com.globaldelight.driver.BoomDevice (1.1 - SDK 10.9) [Click for support]
/Applications/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.4) [Click for support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.hypervisor (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.netbridge (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.usbconnect (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.vnic (9.0 24237.1028877) [Click for support]
/Applications/VMware Fusion.app
[not loaded] com.vmware.kext.vmci (90.5.7) [Click for support]
[not loaded] com.vmware.kext.vmioplug.12.1.17 (12.1.17) [Click for support]
[not loaded] com.vmware.kext.vmnet (0188.79.83) [Click for support]
[not loaded] com.vmware.kext.vmx86 (0188.79.83) [Click for support]
[not loaded] com.vmware.kext.vsockets (90.5.7) [Click for support]
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[running] com.bjango.istatmenusagent.plist [Click for support]
[running] com.bjango.istatmenusnotifications.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.[redacted].UpdatePodcastsAgent.plist [Click for support]
[unknown] ~ [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.backblaze.bzserv.plist [Click for support]
[running] com.bjango.istatmenusdaemon.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.prosofteng.DriveGenius.locum.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.akamai.client.plist [Click for support]
[running] com.akamai.single-user-client.plist [Click for support]
[running] com.backblaze.bzbmenu.plist [Click for support]
[loaded] com.divx.agent.postinstall.plist [Click for support]
[running] com.ecamm.printopia.plist [Click for support]
[running] ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
Dropbox Application Hidden (/Applications/Dropbox.app)
Fantastical Application Hidden (/Applications/Fantastical.app)
TextExpander Application Hidden (/Applications/TextExpander.app)
HazelHelper Application Hidden (/Users/[redacted]/Library/PreferencePanes/Hazel.prefPane/Contents/MacOS/HazelH elper.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Google Earth Web Plug-in: Version: 6.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.3.1.3 - SDK 10.8 [Click for support]
OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
npP3Remote: Version: 0.3 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
DivXBrowserPlugin: Version: 2.2 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
BrowserPlus_2.9.8: Version: 2.9.8 [Click for support]
CitrixOnlineWebDeploymentPlugin: Version: 1.0 [Click for support]
WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
Safari Extensions: ℹ️
1Password
FastestTube
DivX Plus Web Player HTML5 <video>
Open in Internet Explorer
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences [Click for support]
Backblaze Backup [Click for support]
BrowserPlus [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Hazel [Click for support]
Logitech Control Center [Click for support]
MacFUSE [Click for support]
Printopia [Click for support]
Xmarks for Safari [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 748.93 GB Disk used: 672.78 GB
Destinations:
Time Machine [Local]
Total size: 999.85 GB
Total number of backups: 49
Oldest backup: 2014-10-30 20:23:53 +0000
Last backup: 2015-02-26 13:07:38 +0000
Size of backup disk: Too small
Backup size 999.85 GB < (Disk used 672.78 GB X 3)
Top Processes by CPU: ℹ️
32% Finder
25% Console
14% WindowServer
4% NotificationCenter
3% hazelworker
Top Processes by Memory: ℹ️
395 MB bztransmit
186 MB Finder
146 MB Console
146 MB WindowServer
129 MB mds_stores
Virtual Memory Information: ℹ️
1.51 GB Free RAM
4.26 GB Active RAM
1.38 GB Inactive RAM
1.44 GB Wired RAM
21.08 GB Page-ins
3 MB Page-outs
Diagnostics Information: ℹ️
Feb 27, 2015, 02:36:10 PM Self test - passed
Feb 27, 2015, 02:13:40 PM /Library/Logs/DiagnosticReports/Memory Clean_2015-02-27-141340_[redacted].cpu_resource.diag [Click for details]
Feb 27, 2015, 01:49:15 PM /Library/Logs/DiagnosticReports/WindowServer_2015-02-27-134915_[redacted].cpu_r esource.diag [Click for details]
Feb 27, 2015, 09:46:13 AM /Users/[redacted]/Library/Logs/DiagnosticReports/helpd_2015-02-27-094613_[redac ted].crash -
I get the following error after the installation and configuration window of MS Project: "There is not enough memory to complete the operation. To free up available memory, close programs, projects, or windows you aren't using, and then try again."
It happens both with MS Project 2010 and 2013 on a Windows 7 desktop.
I tried installing / uninstalling Office 2010, MS Project, tried installing 32 and then 64 bit versions, clean up, disk error checker, startup changes (msconfig), anti virus, running as Windows 7 and then Windows XP compatible mode.
Nothing helps. I see this issue reported as early as 2007 version of MS projects on Microsoft forums, but I do not see any solution anywhere. Any suggestions on how to fix the issue without having to reformat hard drive? Every other application, including
all other Office programs work seamlessly.
I also tried Microsoft support, after an hour and a half of basically doing what I did before, I was told I have to pay 99$ for "premium" support, so someone can look at this bug.
I have 16 Gb RAM and more than 200Gb or hard drive free, so actual memory is not the problem.This issue was originally reported with MS Project 2007 and keeps popping up since.
A quick Google search provides more than 200K pages of results of this issue:
https://www.google.ca/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren't+using%2C+and+then+try+again.
And 193K results on Bing:
http://www.bing.com/search?q=There+is+not+enough+memory+to+complete+the+operation.+To+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&go=Submit&qs=n&form=QBLH&pq=there+is+not+enough+memory+to+complete+the+operation.+to+free+up+available+memory%2C+close+programs%2C+projects%2C+or+windows+you+aren%27t+using%2C+and+then+try+again.&sc=0-0&sp=-1&sk=&cvid=4cb023c1fbd94ec2bba9821b095f21f2
Computer was defragged already. I run more tests, and specifically when MS Projects tries to run, it tries to take all memory, more than 300Gb, on the computer. (DropBox was running at the same time, and warned that there were no space. As soon as MS Project
stopped attempting to configure itself, everything came back to normal and the available space became available again.)
Looking through older forum posts, looks like this application tries to take "unlimited" amount of memory. Some registry fixes are mentioned potentially, but I was not able to apply them.
Since everything else works, this is a MS Project bug reported by multiple users on various versions of Windows, including Vista and 7, so please provide a fix and not 'not a know bug' lie. All the premium support will say, is to format the hard drive, unless
they have a patch or a registry edit solution. If the latter is true, since the issue exists for multiple years, it should have been already been provided to users.
Also, I am not running a SQL server, or any server, this is an installation on a local machine. -
My laptop has 2x 1GB of RAM.
Right now, and usually, The Physical Memory shown in Task Manager, shows that there is "available memory" (currently it's 500megs worth). (And "system cache" says 300megs.)
There is also, right now, 2.5GB of page filing being used.
If I were to replace the 2GB of RAM with 4GB (of the same Mhz), would there be a noticable increase in performance?
(windows XP 32bit OS)A matched set of DDR2 ram will perform a lot faster one memory not matched. Its required for the double data rate to work. Hence 2+2 is the max you'd need/want in a 32bit machine. Windows 7 was built for large memory footprints. XP was built to run just barely in 64MB but really needed a min of 128MB to support a network connection and printing. It was never enable to truely go a whole lot further than a few machines built capable of 1GB. There was even a bug which was patch causing problems if a !GB or more was available. Just because it can see it does not mean it actually uses it !! The kernal by default is swapped in/out of ram even in larger memory systems. Why, it was is not aware of the extra memory and does not change its behavour from a 512MB machine.
As for the 1333Mhz ram the timing may be faster than the other memory used. Hence it flow the data faster on the bus. Fewer delays in various cycles including the RAS/CAS etc but thats all under the hood so to speak.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3 -
ILife & iWork '08 Install caused dramatic loss of available memory...
I just installed both iLife & iWork '08 on my MacBook Pro laptop. It had approx. 24GB of available memory. After the installation I now have 2.51 GB of memory. I'm also now seeing "Your startup disk is full" error messages. What gives?
Hi Don Wise;
You have overfilled your disk. With the free disk space as low as you now have you are leaving yourself open to poor performance and file corruption. I would start looking at moving files off of the disk to free up space.
You can download WhatSize to help you find out where the disk space is being used.
When you get some more free disk space you should boot from the install media and repair your disk. If you don't do that you will be leaving yourself open to strange problems in the future due to file corruption.
Allan -
'flash:c2600-js-mz.122-34.bin' is too large for available memory??
guyz, i have upgrade my 2621 IOS,the IOS requirement is 16/48 and my router is have 16/48 as well. But everytime the router boot, ther is an error msg. What does it means?
"%SYS-3-IMAGE_TOO_BIG: 'flash:c2600-js-mz.122-34.bin' is too large for available memory (7016856 bytes).boot of "c2600-js-mz.122-34.bin" using boot helper "flash:c2600-js-mz.122-34.bin" failed
error returned: File read failed -- Not enough space
loadprog: error - on file open
boot: cannot load "c2600-js-mz.122-34.bin"
++++ BOOT MSG HERE ++++
program load complete, entry point: 0x80008000, size: 0xb8d40c
Self decompressing the image : ################################################################################################################################################################################################################################ [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0000A2 0X0010A400 C2600 Dual Fast Ethernet
0X000F3BB0 public buffer pools
0X00211000 public particle pools
TOTAL: 0X0040EFB0
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 5Mb.
Using 10 percent iomem. [5Mb/48Mb]
%SYS-3-IMAGE_TOO_BIG: 'flash:c2600-js-mz.122-34.bin' is too large for available memory (7016856 bytes).boot of "c2600-js-mz.122-34.bin" using boot helper "flash:c2600-js-mz.122-34.bin" failed
error returned: File read failed -- Not enough space
loadprog: error - on file open
boot: cannot load "c2600-js-mz.122-34.bin"
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 49152 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0xb8d40c
Self decompressing the image : ################################################################################################################################################################################################################################ [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
0000A2 0X0010A400 C2600 Dual Fast Ethernet
0X000F3BB0 public buffer pools
0X00211000 public particle pools
TOTAL: 0X0040EFB0
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 5Mb.
Using 10 percent iomem. [5Mb/48Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
+++++++++++++++++++++ Show Version ++++
Router#sh version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JS-M), Version 12.2(34), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Wed 01-Mar-06 20:31 by pwade
Image text-base: 0x8000808C, data-base: 0x814718E4
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Router uptime is 7 minutes
System returned to ROM by reload
System image file is "flash:c2600-js-mz.122-34.bin"
cisco 2621 (MPC860) processor (revision 0x102) with 44032K/5120K bytes of memory.
Processor board ID JAD04290DBX (302381003)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
+++++++++++++++++++++++++++++++++++++++++++ -
Hi ,
I configure a dynamic memory With 512 MB for a VM , and available memory 1GB
what happen when I boot the VM , While it actually need 3GB for booting - Note I don't configure Smart Paging ?
Thanks.You won't be able to boot at all.
pagefile and dynamic memory only comes into play when you don't have enough memory on the host, to support the 'startup RAM' on the VM, and when the VM does a
reboot.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com ) -
Not enough available memory. Cannot upload the file. [Android]
Why do I get an error message that says: "Not enough available memory. Cannot upload the file." When trying to save a pdf to the document cloud? The pdf is 105MB and I am using a Samsung Galaxy Note 3.
tried un syning books from itunes as well as deleting app, reinstalled app and re-syned books - appears to be ok now
-
Just a quick one on how available memory can affect datapump imp.
Will increasing the SGA from 2GB to 8GB of a database on which data is being imported affect the total import time?
Just a bit curious!
ThanksHi,
What is the method of the Import Method. Whether it is External Path or Direct Path. If it is Direct Path it will not use buffer cache, it will directly insert after the HWM. If it is External Path it will use the SGA. I dont find a point to increase the size of SGA for the import process alone. If you have a luxury of having 8GB instance for import process you can have it for the normal databse operations too. Rather you can do the import process on the less peak time or you need to address the below questions to increase the size of SGA for this process
1) how much data are you going to insert?
2) how many users are going to be connected to the Oracle database when import is going to happen?
3) how big is your improting data and how it wll affect the performance
You can go for direct path insert which will be faster than the external path
Thanks,
Vijay -
Warning- extend your available memory to allow other programs to close
Warning- extend your available memory to allow other programs to close
Go to Settings>General>About>Available How much available space do you have?
Or it could be saying you don't have sufficient RAM because you have too many apps open.
For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Cheers, Tom -
Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(
Apple Logo, left hand side of the menu bar, About this Mac. It should be right there. If not then More Info, Sys Info.
But it would seem you don't have 2GBs installed and more then likely both RAM slots are already filed. So you just need to buy more RAM in a pair. That could be 2 1GBs chips or if your Mac can have more then that then 2 2 GB chips or 2 4GB chips.
Get your model # and go to Crucial.com and use their memory search to find out how much your Mac can have installed and the price for it. I suggest you install as much as it can take. Cost is very low on RAM these days. -
Where is available memory displayed?
I'm sure this is a dumb one, but I can't find this information on Finder, "about this Mac", etc. I'm sure it is right under my nose.
Available memory (ie, RAM)? Go to Activity Monitor (in your Applications/Utilities folder) and you'll see a pie chart displaying used and available RAM.
If you meant hard drive space, it's shown at the bottom of every Finder window. You can also select your hard drive on your desktop, click cmd-i, and in the Get Info window, you'll see total, used and available space.
Matt -
What is the available memory for user in iPad
In iPad 3rd generation wifi model, what is the available memory for users?
Capacity Available Memory
16 GB ?
32 GB ?iOS should take about the same amount of storage on both, the difference is partly due to how a 'gigabyte' is defined e.g. on packaging it's 1 billion bytes, but on the device itself it uses the binary definition (2 to the power 30), and some storage may also be 'lost' by formatting : http://support.apple.com/kb/TS2419
-
Hi Experts,
I am getting below error when Exporting data from my one web application to the Excel 2010 on Windows Server 2008 R2 ,
02/29/2012 18:54:50
Type : System.Exception, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b11a5c481859e569
Message : -2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space.
• To make more memory available, close workbooks or programs you no longer need.
• To free disk space, delete files you no longer need from the disk you are saving to.
The disk space is 30 GB free, I have cleared all the temp files, increased the virtual memory & internet temp files size to max but no luckYou want to use this one here - MMC
comexp.msc /32
THAT will launch the MMC process
as 32 bit then you'll the Microsoft Excel Application.
Right Click -> Properties.
What I did at this point was to select the Identity tab and then select "The Interactive User" (the default was "The launching user"). My app pool was already running as "LocalSystem". I believe by running it as the Interactive User now that it
has the right permissions to save workbooks.
Everything worked after this.
This was a tough one!
R. Matt Sampson
Maybe you are looking for
-
Hi I have the following problem. my Ical doesn´t sync with exchange calendar any more. only syncs till june 2010. Iphone sync still works (with the same server address etc.) both ways. I deleted Ical and calender cache and created the exchange accoun
-
Iphoto crashes when trying to export photos
When I try to export photos from iphoto the program crashes.
-
Failing while initializing static data
hie all! i'm making a jar file using build.xml configuration. <target name="makejar"> <jar destfile="${lib.dir}/${jar.name}" basedir="${base}/bin/"> <manifest> <attribute name="Main-Class" value="${jar.main-class}"/> <attribute name="Class-Path" valu
-
How do i restore missing hp 932c driver?
The most recent upgrade for snow leopard seems to have wiped out the driver for my HP Deskjet 932c. Unfortunately I draw a blank when I try HP driver downloads as they say it automatically loads with the OS. Is there a way to find the driver and incl
-
6085 front screen broke?
Does anyone know where to get a screen from?? I am in the US and looking for a new screen is impossible I have contacted the phone compnanies around here and no one can find one. TIA