Excite 10 won't function on Wifi "N" GHz Band

I have 2 locations, one with a Linksys E3000 and the other with Netgear WNDR3700.  At both locations the Excite 10 will not find the SSID of the GHz N band, and will give an "out of range" when added. At both locations I can detect the N band and G band on my Ipad and Samsung Tab 10, and connect to either with both. The Excite will only detect and connect to the 2.4 Ghz "G" band.
Anyone operating an Excite 10 on the 5 Ghz "N" Band?

Thanks, you are correct.  I mistakenly thought the N mode was in the 5 GHz band.  My tablet shows a connection speed of 65 Mbps.  I understand that anything over 54 or 56 Mbps shows you are operating in the N mode.  Thanks to all for the enlightenment.

Similar Messages

  • Since the last updating of the system, my Ipad 2, it won't connect to wifi more than 5 minutes at a time unt

    Since the last updating of the system, my Ipad (model MC769C), it won't connect to wifi more than 5 minutes at a time until I reset the router.  Anyone can help ?

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

    This can be caused by a number of issues.
    Was everything working and then suddenly stopped??
    Or is this a new clean setup and has never worked.
    Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
    Check the IP the MBP gets including dns and gateway..
    Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

  • Some apps do not function without WiFi

    Hello.....I ordered roaming for 30 days outside US for 2 mobile phones. But my whataspp in one of my phones do not function without WiFi. It's that ok. I would like to know if I can use it as we are in US, (Puerto Rico). Please contact me. Thanks....Franklin Avilés-Santa.

    Puerto Rico is considered local. You can use your phone there just like at home.

  • "game controllers" won't function

    Asking help for this problem everywhere, figured I'd come to MSI because it is their fault.... Anyways I have a USB gamepad which I'm trying to connect to my computer.  This gamepad needs "game controllers" in control panel to function.  Everytime I try to use "game controllers" it whines about how my gameport drivers aren't configured properly and it completely won't function.  Now I don't need a physical gameport, I just need whatever gets "game controllers" working.  Any ideas would be greatly appreciated.  Windows XP PRO SP2.

    unplug ANY other USB devices you have(except mouse/keyboard but I'd try that as a last resort too) and then try the gamepad again.
    I've got a Microsoft forcefeedback wheel that won't work on my SIS motherboard box till I unplug the Microsoft gamepad first.
    There's also a Bios setting in "integrated Peripherals" menu to enable "all legacy devices" although I'm not sure this does anything after Windows starts up...Just an idea.

  • After iTunes update, Error code R6038, iTunes won't function

    Afterupdating iTuneson my Dell running Vista, Error Code R6038 pops up and iTunes won't function?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • My ipod touch won't connect to wifi at home and it use to, it keeps saying my password is wrong

    My ipod touch won't connect to wifi at home, it use to work just fine, now it keeps telling me my password is wrong, but it can't be wrong because it is the same one I have always used. I also have an IPad2 that belongs to my daughter and it connects with our wifi at home with no problem.  But, why is my wifi telling me that my password is wrong.  I have tried everything, we have changed the pass word and that did not work.  We have have taken security off of our wifi and my ipod touch give me another message, but it won't connect to my wifi at home.  Please help... b/c the greatest thing for me is to be able to connect to wifi at home.
    thanks

    I have even shut down my ipod touch to see if it fixes the lack of wifi connection at home but it keeps telling me my password is wrong.  I can connect everywhere else, but not at home.  Pls help my.. I need to connect at home.  Does it matter if we have othere decives like ipads connected to the same wifi.  Because we have an ipad2 and my ipod and up until 1 week ago, we had very little issues keeping both of our devices connected at home.  Eitherway the ipad2 is still working just fine on our home wifi, but my ipod touch keeps refuseing to accept the password.
    Pls help, i am very frustrated and I have tried everything.

  • My MacBook Pro shut down unexpectedly and won't connect to wifi now.

    My MacBook Pro shut down unexpectedly and won't connect to wifi now. All other devices in my house are connecting to the wifi just fine. The laptop just refuses to connect. Any ideas on how to fix this/what it might mean?

    Try a SMC reset:
    http://support.apple.com/kb/HT3964
    Follow directions for "A battery you should not remove yourself"
    Check the mage safe connector and port for any debris.

  • After uodating to IOS7, my iphone 5 won't recognize my wifi password. Any suggestions to fix this?

    After updating to IOS7, my Iphone5 won't recognize my wifi password. Any suggestions on how to fix this?

    Hello Nancy,
    Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone.  I recommend the following article and specifically steps 4 and 6 for the situation you described.  Step 4 says to restart your phone, but if you click on the link in step 4, you will get the steps to reset your iPhone as well.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Iphone won't connect to wifi

    My iphone won't connect to my home wifi. It say's connected but when i try and go online it say's unable to connect. I've tried forgetting the network, turning wifi off and on. The ip address is ok and my laptop connects ok.
    Has anyone got any ideas about how i can fix it?

    I am having the same issues as GirlyGirl.  Every other day or so my iPhone 3GS won't connect to wifi.  Before I was showing the wifi signal as if it were attached but I couldn't surf Safari.  Now even though under the wifi settings it shows I'm connected, I don't get the wifi fan showing I'm connected.  I've done the following:
    Renewed lease
    Forgotten network
    Reset Network Settings
    Reboot my iPhone
    Two days ago when I rebooted the router and Reset Network Settings it started working correctly.
    I've been working with my internet provider, they tell me my firmware on my 2wire is up to date & the issue is definitely with my iPhone.
    Security Settings:  WPA-PSK (TKIP) and WPA2-PSK (AES)
    My iPhone is attaching to the 169.x IP Address and the Subnet is 255.255.0.0. The router, DNS and Search Domains are blank.
    Also to note, I changed the name of my device through the gateway router so I could identify it more easily.  As of today it had defaulted back to the old name which is the ip address. Even if I don't change anything it isn't keeping those settings.
    Other than restarting my router and taking everything down for 15 minutes each time, what else can I try? 

  • My iPhone 4S won't connect to wifi, it won't even let me turn it on and when it does it just sits there and loads

    My iPhone 4S won't connect to wifi. It won't light up for me to slid on. And the few times it does light up, it just sits there and loads and loads.

    Hi there Ashton1334!
    I have a couple of articles here for you that may address your issue. It seems like from your description that this article is going to be the most relevant, and it deals with Wi-Fi settings being greyed out or dim:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    The other article that you may find useful can be found right here:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Imac 2009, 10.7.4, track pad cursor locks up and won't function

    My cursor has locked up the past few days.
    It won't function at all except to move around. I've had to do a hard shutdown and restart to get things working again. Any suggestions?

    Select  ▹ System Preferences ▹ Bluetooth. Select the device in the list on the left, then from the action menu (gear icon) below the list, select Update Services. If there's no improvement, delete the pairing from the list and recreate it.

  • My iPhone won't work without wifi and I can't receive or send iMessage unless I have wifi or 3G can't use Instagram, Twitter or anything to do with internet or messaging, how do i fix it?

    My iPhone won't work without wifi and I can't receive or send iMessage unless I have wifi or 3G can't use Instagram, Twitter or anything to do with internet or messaging, how do i fix it?

    For anyone else wondering how to fix this, all I did was turn my iPhone off and then turn it back on.

  • AC411 pairs via Bluetooth to my Latitude E5440 but won't function as it says it needs a driver

    I have a 6-month old Dell Latitude E5440, running Windows 7 Professional Service Pack 1, 64-bit.
    My partner bought a brand new Windows 8 computer from Dell last week and AC411 speakers with it. They work fine together.
    I would like to play music from my Latitude. The speakers pair fine on Bluetooth (although the icon shows up as a headset not as speakers) but the device won't function as it tells me I need to install a driver. However the Dell website says there is no driver available.
    Help!

    Hello Chris, and thank you for your answer. But no, that didn't work. I'd done all that already, in fact.
    My laptop is paired already to the AC411; my Dell laptop knows there is a Dell AC411 and it's listed under my devices as a Dell AC411 under the category of Bluetooth headset (with a headset icon). But its status is that it needs troubleshooting and when I click on 'troubleshoot' it tells me that it needs a driver but can't find one. And then when I look on the Dell website, it says there is no driver. 
    And just to be clear, there is no evidence that the headset icon shows the device is enabled, and there is no check box to listen to music. 
    Thanks,
    Dave

  • Iphone 4 won't connect to wifi

    My iphone 4 won't connect to wifi. I had no issues with it until now. It won't allow me to connect to wifi.

    Hi BGonzalez17,
    Thanks for visiting Apple Support Communities.
    See this article for some help with troubleshooting wi-fi connection issues on your iPhone:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Cheers,
    Jeremy

Maybe you are looking for

  • Suppressing levels in cross tab.

    Hello All, I have a project requirenment for one of the client and currently using CR 2008 for creating dynamic reports based on a finance database for profitabilty Analysis. I have been using lot of Web-Elements functionality in my crystal applicati

  • The downloads window has nothing in it. It used to have all downloads and that's what I want. Whenever something downloads, there's nothing in the downloads window.

    I want to know why my downloads window has nothing in it. I'll download a file; the downloads window has nothing in it. This is a recent phenomenon. I haven't added or changed anything. I'm using Firefox 5.0, running Windows Vista Home Premium, 32 bi

  • Excel conversion, weblogic8.1

    We are developing a web application using Weblogic 8.1 express as the application server. Where in we need to convert the reports data into excel format and show it in the browser. The approach we followed is as follows. We are creating the excel fil

  • CS4 PS 3D into AE...help!

    I am importing a Photoshop 3D layer file into AE. It makes a new composition with it's on camera and and control layer. I am wanting to import the 3D layer into an existing composition, but when I rotate the 3D comp, it's a flat 2D image when adding

  • Confusing Ipod Issue, buttons won't work

    I have a 5th gen 30 gig ipod video. Recently (meaning just a few days ago) my ipod died a little. I know that it still has battery power, because I am able to hook it onto the computer and see it charge and connect. My problem is this: The buttons do