Excite Pro AT10LE-A-108: After JB 4.3 upgrade BT keyboard does not work

Hi all !
After upgrade JB 4.2 to JB 4.3 does not work my bluetooth keyboard.
Pair ok, tablet keyboard sees, but not responding.
Please, makes toshiba repair package or fix problem?
On other my android device (LG phone with 4.1.2)  working this keyboard ok.
Sorry, my english is very bad. (Google translator)
Thank you.
Keyboard type

I'm sorry to hear about the problem. In your case, you might want to call customer support. However, I don't believe your AT10LE-A is from Toshiba USA, and this is the forum for Toshiba USA. You should contact Toshiba in your region.
- Peter

Similar Messages

  • Excite Pro AT10LE-A-108: After JB 4.3 upgrade external BT keyboard does not work

    Hi all!
    After upgrade JB 4.2 to JB 4.3 does not work my bluetooth keyboard.
    Pair ok, tablet keyboard sees, but not responding.
    Please, make toshiba repair package or fix problem.
    On other my android device (LG phone with 4.1.2) working this keyboard ok.
    Sorry, my english is very bad. (Google translator)
    Thank you.
    [Keyboard Type|http://www.trust.com/en/all-products/18441-executive-folio-stand-with-bluetooth-keyboard-for-ipad]

    Ok, please, i want downgrade to JB 4.2 for this tablet, it is possible?

  • After 2.0.2 Upgrade, Backing Up Does Not Work...

    Hello All!
    I actually just had my 3G replaced by Apple initially because of applications failing to launch and then the iPhone just locked on reboot. Anyways, I got everything re-installed, re-synced, etc., and during the week my phone was gone, the 2.0.2 update was relased. I couldn't use the backup I had because it wouldn't let me use a 2.0.1 backup file, so I set things up from scratch and it works fine except....
    *When syncing with iTunes 7.7.1 and 2.0.2 of firmware, it will take about 3-4 hours to back up. It results in a backup file with a phone name of Unknown (should be Jim's iPhone) and my last actual backup file is untouched. It sets the date of the Unknown file as 12/31/2000, which I don't think I'll ever use. I assume it's corrupted.* Did a search here with no luck, but it's easy to miss things.
    Is anyone having problems just since the upgrade to 2.0.2 as well? It worked fine previously running 2.0.1 (before my phone was swapped). I have deleted all of the backup files and will try again tomorrow, but I'm totally confused what the problem is...why it takes so long and why it doesn't make a correct file or show a current Sync date. I'd appreciate any fellow commiserating with other users.
    I'd appreciate the help! Thanks in advance...
    Jim

    I had backup problems too, with slightly different results.
    I did a few app updates that caused EVERY app that wasn't installed with the OS to crash upon launch. My 5 day old backup was there, so I decided to Restore my iPhone. After the Restore iTunes didn't ask me what backup I wanted to restore. My 5 day old backup is gone from the backup folder. I can't even try to downgrade, restore, then update, so all of my data is gone. I'm steamed as all of my SMS are gone and I needed information from them, that I would have had, if we had cut and paste! Also, I can't imagine why, my voicemail is completely rest with NO messages or greeting! You can also add to oddities that none of my contacts have their pictures anymore even after syncing 8 times. I'm becoming more and more upset with my advanced iPhone.
    Syncing is another oddity. Even after my 2.0.2 update (before restore) I was getting 60-100 minute syncing. This is a problem that many are facing, and it is very strange to still be getting such times. From doing research, the only things that are actually synced is settings data. Things like music, video, contacts... all things that are on your Mac/PC are NOT synced. So syncs are supposed to be quick. I'm finally getting <10 minute syncs at the moment, for the first time since I've had my phone.
    You may want to backup your iPhone, then manually backup the backup (just in case), then try a restore. It may help with your sync times.

  • Keyboard does not work after using Support Drivers

    I have a Macbook Pro 4,1 15" 2.4GHz C2D, and managed to get Bootcamp installed on it with Win7 Home Pro. I have verified that it runs correctly, but it is missing many of the drivers needed to make things run smoothly. I no longer have my Leopard disks that the machine came, so I figured the WindowsSupportDrivers would be the way to go.
    When I install them and reboot, the keyboard does not work. When I hit capslock, I get the caution notice indicating underneath my password field indicating the capslock key is on, so it's not like my entire keyboard is disabled. The system is unusable right now, since I have to enter my password to login, and it does not take any keyboard input. Using an external keyboard did not resolve this issue.
    I did a system restore to get it back to a usable state for the time being.
    Is there an alternative to the BCA support drivers or the Leopard disk? What's going on with my keyboard after the driver update?

    Maybe you have installed obsolete drivers. If you have Lion, open Boot Camp Assistant (Applications > Utilities) in OS X and download Boot Camp drivers

  • My keyboard does not work after cleaning :-(

    Hello, I have a MacBook Pro (bought in december 2009) an now the keyboard does not work after I cleaned it. This was on thursday and today it still does not work. Any ideas?

    Chances are that you've shorted the terminals on the keyboard, and will need to be replaced… When the keyboard on unibody MacBook Pro's is replaced the whole 'top case' will be done, trackpad etc… Now generally it is highly unlikely that the Liquid submersion indicators will have been activated unless the cloth was saturated with water. Also unless you purchased the AppleCare protection plan your MacBook will be out of warranty and will require an out of warranty repair.
    From knowledge out of warranty repair for a top case assembly it's £163 and a level 2 hardware repair is £28

  • External USB keyboard does not work with T60 after BIOS upgrade

    External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
    It does the same with or without the docking station.
    Anyone else bumped into this problem yet? 
    Has someone found any fixes for this?
    t

    Hi and welcome the forum!
    Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
    v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • After Recovery with CD Satellite C660-1FE keyboard does NOT work

    Hello,
    A month ago I purchased a Toshiba C660-1FE. After three weeks my HD broke down. I bought a new HD from Western Digital and replaced the broken HD. As I did not make an recovery image of my HD, I had to order the Product recovery discs off the Toshiba website (3 discs, of which disc 1 and 3 were the only one's required for installation).
    Now, I have the problem that my laptop keyboard does not work. I am currently using a USB keyboard and mouse to replace my keyboard and touchpad of the laptop.
    The laptop keyboard works fine in BIOS. Therefore, I hope it's just a driver problem.
    I have:
    tried finding and installing lots of drivers on from the toshiba website, no result.
    tried changing settings in the bios (usb enable/disable).
    tried to fix the problem by re-installing the entire computer again several times.
    The keyboard seems to work until windows loads. When the system is starting up I can press caps lock and num lock and the green lights come on. This all stops working once the windows startup symbol appears.
    Perhaps a second problem in the device manager: under the display-adapter, 2 subcategories have exclamation marks: it says Mobile Intel(R) 4 series express chipset family twice! I can't seems to fix these with any drivers I can find either. When I check the settings I have this message (google translate since it was in dutch):
    +The digital signature for the drivers for this device is required, can not be verified. Possible after a recent hardware or software change a file that is installed incorrectly signed or damaged, or is malicious software installed from an unknown source. (Code 52)+
    +You need to restart the computer to this device changes to take effect.+ (obviously I tried that too)
    Can someone please give me some help? I am at the end of my wits.
    Sincerely,
    Daniel

    Hi MisterX,
    thank you for your response. I have tried these things and there is no such thing as PS2/keyboard in device manager. It's as if the Hardware is not even recognizable in windows. I am starting to doubt whether I got the right Backup CD.
    I wrote the following e-mail to [email protected]:
    +Dear Toshiba,+
    +after receiving the recovery CD's for my toshiba c660-1FE, it turns out that the drivers for the keyboard and touchpad are not installed. I have tried many things to get around this but it seems to me that I have received the wrong product recovery CD's. The chipset drivers are not the right ones, the overall layout of this version of windows 7 is different from before and when looking for answers in the toshiba forum I have concluded that the recovery CD's could be the wrong ones.+
    +My laptop: Satellite C660-1FE+
    +serial: 5B378048K+
    +Part-nr: PSC0LE 02M0TU26DU+
    +Recovery CD's I received are CD's 1-3 with serial R14254DU+
    +Would you be so kind to check whether these CD's should be 100% compatible with my laptop?+
    +This would be greatly appreciated,+
    +Daniel+
    MisterX, do you know any other emails I can forward this too? Or anyone who could perhaps tell me if I got the right CD's? They are taking their time to respong to this...
    Kind regards,
    Daniel

  • After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

    After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
    During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

    I had the same problem and found the solution here:
    https://discussions.apple.com/thread/3189272

  • My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    My iphone 6plus not working not charge but when i run it the first time working half an hour  when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now

    Hello Nadersalah,
    It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
    iPhone Repair and Service - Apple Support
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • After installing acrobat my Microsoft office package does not work properly, word will not open and in my email i can't select anything with the mouse

    After installing acrobat my Microsoft office package does not work properly, word will not open and when I want to write an email in my outlook email i can't select anything with the mouse. so copy past en delete are not an option.@

    Are you using any MS Office third party Add-ins? Test:  Remove third party Add-ins other than PDFMaker.  Test to see if the MS Office apps run afterward.
    Did you attempt to repair MS Office?  Test:  Go to Add/Remove Control Panel run Repair.
    Finally, have you tried testing to see if it's PDFMaker?  Test: Use the Add/Remove Control Panel to modify the Acrobat installation to remove PDFMaker.  See if MS Office applications launch and behave correctly?

  • HT2188 iPad 1 requested activation after being low on power. Activation does not work.

    Hi
    My iPad 1 requested activation after being low on power. Activation does not work so I have tried to restore it from iTunes.  this progresses but after rebooting, it gets to the activation process for a few minutes and re-boots again - in a loop now. on ios6, not 7. help please?
    I also looked at trying to do a manual install of firmware via iTunes but I do not know the version of firmware or how to find it out - so really stuck!
    Thanks

    I pulled my unit out of the dock - powered up and the display goes blank (if you look carefully you can see the bios boot screen, then black, then you can see the backlight turn off.
    I plugged in the USB monitor and boom - I could log in.
    Once Logged in I could see that windows still thinks it has some of the monitors from the dock, and the internal display is set to disable.
    So the issue is the detection / setup of monitors in/out of the dock.
    I've done about all I can do for dubugging, I hope lenovo can pick up from here. if not I'll have to call lenovo support.

  • After yosemite upgrade junk mail does not work - is this a known issue

    after yosemite upgrade junk mail does not work - is this a known issue?

    Yes, it is a problem.

  • After the OS 6 update my speaker does not work. My music plays but no sound comes out. Can someone help me with this issue? I currently have the 4S.

    After the OS 6 update my speaker does not work. Volume control on the side does not adjust the volume either. My music plays but no sound comes out. Can someone help me with this issue? I've tried rebooting my phone but still no sound comes out. I currently have the 4S.

    try to activate and desactivate the airplne switch a couple of time

  • MacBook Pro Backlit Keyboard does not work

    Hello all!
    I recently bought a used MacBook Pro (late 2008, 2.4 GHz Core2Duo) and the backlight on the keyboard does not work. I have reset the SMC and the PRAM, I have the latest firmware (EMI and SMC) and still no luck. I am hoping this isn't a hardware issue, but what can I do to fix this?

    I think there is a sensor on the top left. It looks like  a little speaker thing. If you swipe your finger over it, it activates/deactivates it. I read this somewhere online. Works for me most of the time if it's not lighting up and showing the 'no/stop' symbol.

  • Touchpad mysteriously enables itself, after I disable it and number pad does not work

    I just purchased a HP 15 Touchsmart Notebook. I upgraded it to Windows 10 upon initially setting up this Notebook.I have 2 problems: 1. After disabling the touchpad, it mysteriously enables itself.2. The number pad on the keyboard does not work at all, even when pressing the num lock. I've researched the Internet and have come up with nothing. Please help Thank you

    Ok.. I found  how
    First I turned off the wireless in both computers, then I turned off  the firewall in the PC  
    after I plugged  the Ethernet cable in both computers
    I found the  IP address of the PC in; start run  CMD  at the promt  I wrote IPconfig  enter
    In the MAC  I went to  go connect to a server
    I wrote the IP address in the server
    In the user I wrote the admin user of the PC with its password
    Yahooo!...  conected  and I copy the 200 gigs in 2,5 hours  
    Med_

Maybe you are looking for