Exclamation point but songs play one at a time?

I wish I could say that after all these years I am smart enough to navigate iTunes...
My setup is as follows:  iTunes library is located on a Mac Mini, a couple of Macbooks on the network use iTunes and point to this library.
Almost every song in my library shows an exclamation point next to it on the Macbooks.  However, if I double click on any song it WILL start playing.  Once the song has played the exclamation is gone, but iTunes will not play the next song on the album, it plays the next song without an exclamation.
One thing to note.  I take the Macbooks off the network to other places almost everyday.  When I return this starts all over again.  I was told once that I should close iTunes before I leave, so I have been doing that.  Doesn't seem to make a difference.
Questions:  Can I get rid of these exclamations somehow once and for all?  If not, is there a quick way each day to just highlight the whole library and press something to get rid of the exclamations?

Are there check marks beside all the songs in the playlist? Unchecked songs have to be clicked on individually to play them, checked songs will play one after the other. If you hold down the CRTL key and click beside any song in your list then all the check boxes can be toggled on or off: iTunes - Keyboard Shortcuts for Windows

Similar Messages

  • I have music in the cloud but only plays one at a time, anyone have any idea how to solve this please?

    I have music in the cloud but only plays one at a time, anyone have any idea how to solve this please?

    - Transfer iTunes purchases by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer other music by using a third-party program like one of those discussed here:
    Copy music from Ipod to new computer...: Apple Support Communities
    You may have t opurchase one.  Some only do a limited number of transfers without paying.
    - Make a backup of yur iPod by connecting the iPod to the computer and right clicking on the iPod under devices in iTunes and selecing Backup.
    - Restore the iPod from that backup.

  • HT1349 What to do when I download a CD and I get an exclamation point in front of one song.

    Why do I get an exclamation point in front of one song when I try to download a whole CD? This song won't download.

    Hello enrique a.
    Instead of trying to re-invent the wheel on this one, take a look at an article such as this one to help you take care of these exclamations.  Basically, it means iTunes is unable to locate the file on your computer anymore.
    http://ipod.about.com/od/itunesproblems/qt/Fixing-The-Itunes-Exclamation-Point.h tm
    B-rock

  • Sound to play one at a time

    How do I make a command saying:
    if sound is playing - dont play sound, else, play sound?
    so that the sound effect only plays one at a time. So if holding down SPACEBAR for example, the sound will play and only after the sound finishes, can it loop if SPACEBAR is still pressed.
    Thanks in advance.

    Ok, I'll just copy and paste the relevent parts: (This is for a car-racing game)
    onClipEvent(enterFrame)
         HAND = Key.isDown(Key.SPACE)
         if (HAND) {
            speed  *= handbrake
            //sound
            var screechSnd:Sound = new Sound();
            screechSnd.attachSound("TireScreech");
               screechSnd.start();
            // SKIDDIES
            if (speed > MAXskiddisplay) {
            steer = steer_handbrake;
            if (!skidding) setLastpos();
            skidding=skid(HAND);}
            traction = handbrake_traction/surface; }
        else {
            skidding=false;
            traction = Math.max(traction_max, Math.abs((speed-MAXturnSpd)/surface))
            steer = steer_normal }
    So basically, when the handbrake (spacebar) is pressed, the handbrake effect will be applied to the car and it will skid (which works), but the problem is I also want a sound to play when it spacebar is pressed.
    The sound does play, however, when pressed, the sound plays many times over at the same time, rather than letting the sound finish for the sound to repeat itself again (if spacebar is still pressed - that is).
    Thanks again in advance

  • I've purchased cartoon tv shows for my iPad. Prior to the new updates, I could play one at a time or continous. Now I can only play one at a time. It's annoying to keep changing it every five or six minutes. Is there a fix to get it back playing continous

    I've purchased cartoon tv shows for my iPad. Prior to the new updates, I could play one at a time or continous. Now I can only play one at a time. It's annoying to keep changing it every five or six minutes. Is there a fix to get it back playing continous

    Use this feedback form and tell apple. http://www.apple.com/feedback/ipad.html

  • All of my music that wasn't purchased from the itunes store has been faded out on my ipod, despite me being able to play them in itunes. half my songs have exclamation points but only in the 'on this ipod' section, and when i double-click no window appear

    I'm freaking out because almost all my music except for those songs purchased directly from the iTunes store has been deleted from my iPod - about 35 gigs. The songs show up, but they're all faded out and unplayable from my device (I have the newest version). Exclamation points appear beside all my songs in the "On this iPod" section, and yet I can't double-click to locate the files as nothing pops up. Some of my music has a weird circle next to it and is even more faded out when I'm in the "On this iPod" section - that's been happening for a couple of days. Yesterday I tried to set my settings to sync with my library only, and it worked, but this morning everything got even worse with the rest of my songs disappearing. What's happening???? Help??

    The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
    https://discussions.apple.com/docs/DOC-3141

  • I purchased my daughter the new ipod. I downloaded the latest version of itunes and after syncing the new ipod, I was unable to get the majority of my songs. They all appear with an exclamation point. Even the ones purchased on itunes. Why?

    I purchased my daughter the new ipod. I downloaded the latest version of itunes. After syncing the ipod, all my songs appear grayed out. They have an exclamation point next to them. Even the ones I purchased from itunes. How do I get my songs back?

    Usually, the exclamation mark tells you that the song was not where the program expected to find it. It may also mean that there was an error with the file itself.
       If you click on the exclamation mark, it may give you a reason. You can also double click the file to make it play. If the file is not found, it will tell you. Just follow the prompts to look for the song again. It will ask you if you want to look for the other missing songs in the same folder. You can do it, but unfortunately, the last few updates have made the program blind to the songs that are there and you sometimes have to do the same process for each song.
       If neither of these help, I would suggest starting from scratch and reinstalling iTunes. I have had to do that before. Do your best to back up the library and such first.
       Sometimes a computer will rename a hard disk (Windows) and all the songs on that disk will be gone to iTunes because it will think it's looking in the right place. It can't recognize that the hard disk or partition has been renamed.
    I know that this is a podcast, but the principle is the same. A dialogue box should pop up to tell you just what the problem is.
       I hope this helps!

  • My Itunes will load on Apple TV and play, but only plays one song at a time.  It will not shuffle or continuously play an album.  All of the songs display, but will only play one at a time...home sharing is on.  Any suggestions?

    My Itunes info will load onto Apple TV, but will only play one song at a time of my music.  Home sharing is on, airplay is on, router info has been reset.  What am I missing?  It has never done this before....

    My Itunes info will load onto Apple TV, but will only play one song at a time of my music.  Home sharing is on, airplay is on, router info has been reset.  What am I missing?  It has never done this before....

  • Just downloaded an album but cannot play one of the songs. How can I re-download?

    Purchased and downloaded an album from the iTunes Store... one song does not play correctly.
    All other songs play great, but the last one only plays 20s of the 3 minutes and passes on to the next song.
    How can I download the song again?

    Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copy from your iTunes library and then download again from your purchased history. If the problem persists, or that facility is not available in your region contact the iTunes Store support staff through the report a problem links in your account history.
    tt2

  • Exclamation Point for Songs on External Hard Drive

    This should be pretty straight-forward, but I've been searching for the past two hours and haven't found anything to solve this issue.
    I have my entire music library (35,000+ songs/320 GB) on an external hard drive. I plugged my iPod into my PC to charge it and didn't have the external hard drive connected and the message *"Some of the items in the iTunes library, including [song name], were not copied to the iPod [ipod name] because they could not be found"* and every song that was in my playlist shows the dreaded "!" exclamation point next to it.
    I've disconnected the iPod, connected the external hard drive, and reconnected the iPod only to get the same results.
    How do I get iTunes to remap all the exclamation point songs without:
    1. Consolidating my entire library to my PCs hard drive (which doesn't have enough storage)?
    2. Manually re-mapping hundreds/thousands of songs?
    3. Deleting and re-adding every song in my library (takes 4-6 hours)?
    Some additional details (just in case):
    Windows XP
    iTunes 9.1.1.12
    3rd Generation 4GB Nano
    There has to be a simple way to address this. Any help would be greatly appreciated.

    Thanks for the replies and the detailed information. I appreciate the assistance but remapping the drive letter won't help. My iTunes library is still completely visible and per the XML file, the library location (not the physical music file location) is on the C: drive, which is correct. For whatever reason, when iTunes couldn't find the hundreds/thousands of songs that were on my playlist it changed the file path of just those files to file://localhost/E: from the original file path (which was F:/music/...). The external HD is still mapped to F:.
    Any file that wasn't on my playlist is fine. What I need to know is how to get iTunes to find those hundreds/thousands of songs that were on my playlist and get rid of the exclamation point. This should be a pretty cut and dried case:
    1. iTunes recognizes all the file paths of all the songs on the external HD
    2. I plug in my iPod without the hard drive plugged in
    3. All the songs on my playlist (and only the songs on my playlist) are now flagged with an exclamation point and won't open unless I physically browse for them.
    4. All other songs not on my playlist still play/synch without issue.
    This is a simple situation...does anybody have a simple solution? I can't be the only person out there that is encountering this.
    Thanks in advance!

  • Songs will only play one at a time

    After updating iTunes, using the last update 7.6.2, it will only play one song at a time and stops. It will not play continuously through a playlist. Am I missing something in the setting? Any suggestions?

    Are there check marks beside all the songs in the playlist? Unchecked songs have to be clicked on individually to play them, checked songs will play one after the other. If you hold down the CRTL key and click beside any song in your list then all the check boxes can be toggled on or off: iTunes - Keyboard Shortcuts for Windows

  • Podcasts in a playlist only play one at a time instead of in seq

    I just got a 6G nano iPod.
    I have smart playlists that include my favorite podcasts in reverse time sequence.
    When I play from this list, only one episode at a time will play.  After the episode completes then the iPod goes back to the playlist where you can manually select the next podcast.
    This works fine on my 3 or 4 G (I don't know which it is) nano.
    I want to play all the podcasts in the playlist one-after-the-other without stopping playback.

    I have smart playlists which have Media type "Podcast" and Play Count = 0.  These playlists were only playing one song at a time.
    The solution that I found to the problem was to
    connect ipod
    goto ipod in devices
    select podcasts
    select sync podcasts
    DON'T SELECT AUTOMATICALLY INCLUDE ALL EPISODES OF ALL PODCASTS
    Scroll down to Include Episodes from Playlists
    Then select all the smart playlists that include ipod episodes.
    This means those playlists are copied to the ipod and they play in order.
    It doesn't seem to matter whether or not the playlist is selected as well under the Music tab.

  • Podcasts play one at a time?

    Last night was the first real night of using my nano since I got my crystal film. So I was listtening to my podcasts while trying to fall asleep and discovered that, unlike with my shuffle, the podcasts on my nano are categorized into individual subscription folders and therefore once a single podcast plays, it stops. How do I get my podcasts to play one after the other? Is there any way to create a podcast playlist into which I can put them all?

    Well thanks to GolfSierra's explanation, I successfully created a smart playlist so my podcasts play sequentially. But I was just wondering now whether it's normal that in addition to my playlist, the nano shows the purple podcast icon in the playlist with all my subscriptions? It was there before which is fine but now when I go to listen to my podcasts on my nano, it's annoying because the word "podcasts" shows up in a couple of different levels - one representing the top level subscriptions and then another one reflecting my smart playlist - and it gets confusing about which one is which.

  • Two different songs played at the same time in two rooms ?

    Can i play one song on my computer and another in a different room at the same time using Airport Express or any other way?

    No. The same music plays on the computer and AirPort Express (AX).

  • My ipod does not shuffle but only plays one song

    I just got my second ipod touch after the first one died.  I loaded all my favorite tunes but when I hit shuffle, it will only play the first song it comes to and just repeats the same song over and over. 

    You have repeat on.
    This is covered in the manual:
    http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf
    Play the song, tap the screen, tap the repeat icon until it is white = off.

Maybe you are looking for

  • Can't install PSE in new OS

    I had PSE 6 on both my laptop and my desktop.  I upgraded my desktop from Vista to Win 7 prox64 and have the original install DVD.  When I try to install in my new OS it installs properly but on first use it asks for serial number.  I type the correc

  • I have lost my serial number. The serial number is no longer available in my messages.

    I have lost my serial number. I have got a student edition. The serial number is no longer available in my messages. What do I do?

  • Determain ip of remote a object

    Hi I`ve been wondering how i can determain the ip address of a Remote Object on server side. Ssample code: 'client' side: Object o = Naming.lookup("rmi://ip:port/myobj"); o.register(this); 'server' side: public void register(Remote o) { String remote

  • Curtain attachment

    Hello all, In P6 client there is an option to assign curtain dates which displays the date range in shade in the gantt chart. Does this dates get stored in the database? Is there an option to assign/populate these dates automatically based on Project

  • Attempts to wrap my head around printing and color management.

    So, I've been meaning to get (more) serious about printing my shots. It's the summer and I now have some time. I know I've got the first piece of the puzzle in place. I have an i1 Display 2 that I use to calibrate my monitor - my MB + one of 2 Dells