Exclude all languages except English
Hello,
does anyone know how to exclude all languages in portal except English? English should be the only language available in the portal no matter which lanugage is set up in the browser.
Or is there any possibility to change all users (like "mass administration") in user administration from no assigned language to English? We've got about 500 users and I don't want to change each user separately.
Thanks a lot for answers.
Best Regards
Joachim
Hi,
We had the same scenario and for resolving we did this:
Please go through the following link hope this might help you:
[BP Language problem|BP Language problem]
Cheers-
Pramod
Similar Messages
-
I recentley bought a ipod touch 5.01,set all language to English.....every thing i view is in English except when i view (open) itunes or apps store it is in German, I live in England, I was born in England, and i speak only English. I want my itunes and apps store to open and display in English. I have messaged the apple help and telephoned the help, both was helpful but no matter what i do in setting (even in reset, which i've done) my ipod will keep reverting back to German in Itunes and Apps store. All other data in my ipod is in English........just the itunes and apps store grrrrrrrrrrrr.
Please help :-)You can only use the German iTunes/App store if you are located in Germany. The German store is in the German language.
-
Problem in sending the smartform as email for other language except english
Hi Experts,
I could not send the smartform as an attachment for other languages, but where as i could send it in english.
The program is working fine with print priview but not when sending the SF as an attachment
(in other languages except english).
Please do find the below code which i used to send the smartform as an attachment.
Please let me know if there is any mistake in the code.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_compop-tdnoprev = 'X'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*Convert the data from OTF to PDF format
it_otf[] = wa_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = l_len_in
bin_file = lp_xcontent
TABLES
otf = it_otf
lines = it_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
TRY.
---------- create persistent send request ----------------------
send_request = cl_bcs=>create_persistent( ).
len = XSTRLEN( lp_xcontent ).
transform to solix tab
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = lp_xcontent ).
Create Body to the E-mail.
APPEND Text-005 TO l_text.
Attachment Name
l_ponumber = text-004.
CONCATENATE l_ponumber l_doc-xekko-ebeln INTO l_ponumber.
Subject for the E-Mail.
l_subject = text-001.
CONCATENATE l_subject l_doc-xekko-ebeln INTO l_subject.
*create document E-Mail.
*TRY.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = 'RAW'
i_subject = l_subject
i_length = '13'
i_language = nast-spras
i_importance =
i_sensitivity =
i_text = l_text
i_hex =
i_header =
i_sender =
receiving
RESULT = l_email_object
CATCH cx_document_bcs .
*ENDTRY.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = 'RAW'
i_subject = l_subject
i_length = '13'
i_text = l_text
RECEIVING
result = l_email_object.
*Create PDF Document
bcs_doc = cl_document_bcs=>create_document(
i_type = 'PDF'
i_subject = l_ponumber
i_length = len
i_language = nast-spras
i_hex = lt_solix
*Type casting
obj_pdf_file ?= bcs_doc.
Add PDF document as an attachment
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_pdf_file.hi,
i tried with ur problem.but i am able send mail in other languages also.actaullly i wrote a msg whether the mail has been sent or not.i got success message. i am placing my code here please go thorugh it,and do relavant modifications.
*& Report ZPPS_SMARTFORM_TO_PDF
REPORT ZPPS_SMARTFORM_TO_PDF.
PARAMETER: p_date LIKE sy-datum.
PARAMETER: p_rea TYPE char255.
DATA: t_otfdata TYPE ssfcrescl,
t_lines LIKE tline OCCURS 0 WITH HEADER LINE,
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
t_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
Objects to send mail.
DATA:T_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE i,
w_bin_filesize TYPE i,
wa_ctrlop TYPE ssfctrlop,
wa_outopt TYPE ssfcompop,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
WA_OBJHEAD TYPE SOLI_TAB,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1.
DATA: form_name TYPE rs38l_fnam,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I,
nast-spras type sy-langu value 'DE'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZSR_DEMO1'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = form_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_outopt-tdnoprev = 'X'.
CALL FUNCTION form_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = wa_ctrlop
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = wa_outopt
USER_SETTINGS = 'X'
MYDATE = p_date
REASON = p_rea
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = t_otfdata
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = w_bin_filesize
BIN_FILE =
TABLES
OTF = t_otf
LINES = t_lines
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at t_lines.
TRANSLATE t_lines USING '~'.
CONCATENATE WA_BUFFER T_LINES INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
t_RECORD = WA_BUFFER.
APPEND t_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: T_RECLIST,
T_OBJTXT,
T_OBJBIN,
T_OBJPACK.
CLEAR WA_OBJHEAD.
T_OBJBIN[] = T_RECORD[].
Create Message Body Title and Description
T_OBJTXT = 'test with pdf-Attachment!'.
APPEND T_OBJTXT.
DESCRIBE TABLE T_OBJTXT LINES V_LINES_TXT.
READ TABLE T_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR T_OBJPACK-TRANSF_BIN.
T_OBJPACK-HEAD_START = 1.
T_OBJPACK-HEAD_NUM = 0.
T_OBJPACK-BODY_START = 1.
T_OBJPACK-BODY_NUM = V_LINES_TXT.
T_OBJPACK-DOC_TYPE = 'RAW'.
APPEND T_OBJPACK.
Attachment (pdf-Attachment)
T_OBJPACK-TRANSF_BIN = 'X'.
T_OBJPACK-HEAD_START = 1.
T_OBJPACK-HEAD_NUM = 0.
T_OBJPACK-BODY_START = 1.
DESCRIBE TABLE T_OBJBIN LINES V_LINES_BIN.
READ TABLE T_OBJBIN INDEX V_LINES_BIN.
T_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
T_OBJPACK-BODY_NUM = V_LINES_BIN.
T_OBJPACK-DOC_TYPE = 'PDF'.
T_OBJPACK-OBJ_NAME = 'smart'.
T_OBJPACK-OBJ_DESCR = 'test'.
APPEND T_OBJPACK.
CLEAR T_RECLIST.
T_RECLIST-RECEIVER = 'MAIL-ID'.
T_RECLIST-REC_TYPE = 'U'.
APPEND T_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = T_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = T_OBJBIN
CONTENTS_TXT = T_OBJTXT
RECEIVERS = T_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
and i thought of one more soluyion u can write
wa_ctrlop-langu = T002-spras. i think it will also help for u.
revert back if any questions.
please reward me if helpful.
gupta.pullipudi -
The program "Nokia Suite" is in all languages, exc...
Hello, Nokia.
The program "Nokia Suite" is in all languages, except the Azerbaijan.
We, as Azerbaijanians, want that the program "Nokia Suite" will be in Azerbaijan language too.
Whether probably to add to "Nokia Suite" Azerbaijan language?
Whether the Azerbaijan language in the program "Nokia Suite" will be sometime added?
For us, the Azerbaijan fans Nokia, it is very important.
I hope, considering the Azerbaijan fans Nokia, you will add in »Nokia Suite" the Azerbaijan language...Thanks VasiFQuluzade, great to hear about the interest in Azerbaijan, this is new to us. At the moment, we don't plan for new Nokia Suite languages, but never say never.
I'm really happy and excited to get this kind of feedback from you.
Cheers, Samuli -
System Language is English but all documents and reports come out in French
System Language is English but all documents and reports come out in French. How do I get the system to switch all of the documents and reports to print in the English layouts?
thx, Richard.Richard,
Probably this is due to what Dan has pointed out.
You can open the PLD template and go to Print Layout Design menu on the Top and click Display document properties. Check the language properties.
Suda -
Amount and Date in words (Spanish, if logon language is english)
Dear all,
hope sb can help me with my issue.
We have to print within our system for Spain. That means the check itself have to be in spanish.
But we don't have spanish as logon language available. So the logon language is english.
If we print our checks we use the fields
®UD-ZALIW& (for Date in words)
and
&SPELL-WORD& (for Amount in words).
Unfortunately the words are not in spanish but in english. Additionally the day is not in words at all.
Could anybody help me? How can I get the words in Spanish?
Thanks in advance
PhilipHi, u have to use this function
CALL FUNCTION 'SPELL_AMOUNT'
EXPORTING
amount = w_dmbtr
currency = 'CLP'
language = 'ES'
IMPORTING
in_words = w_spell
EXCEPTIONS
not_found = 1
too_large = 2
OTHERS = 3.
where w_dmbtr is the amount of the check.
and for the date
but before u need to set up the sy-langu = 'S'. of spanish
after u get the value set it again to english.
CALL FUNCTION 'CONVERSION_EXIT_LDATE_OUTPUT'
EXPORTING
INPUT = p_date
IMPORTING
OUTPUT = MONTH.
Regards -
I live in Switzerland and can only buy a Mac Air with a French or German keyboard, no chance to buy an English keyboard Mac here,. When setting up I chose the French numerique keyboard, although there are two choices French or French numerique. I put in my language as English. When all was set up I came to the start page and had to put in my password, by the grace of g....I just happened to see the first letter I typed before it turned into a dot. My password which was supposed to start with the number 2 showed a french e with accent before it quikly became a dot.
Because of the dot system, this meant that I had no clue what the keyboard was typing as my password ...........and true enough my password was not accepted despite my trying all combinations. I have had to reformat twice now thanks to Apple Chat and both times my password was not accepted. I am in the process of formatting it again, this time on my own. If the Start page does not accept my password again this can only mean that the Mac left the factory with faults. I could not be more disappointed with the money spent and the time and trouble that Apple Chat and I have spent in trying to correct a brand new out of the box Mac. I have a cheap Toshiba laptop also with a french keyboard and english language which gave me no trouble at all. I am not impressed with the so called King of computers! First of all the dot system is daft. People want to be able to see and confirm their passwords before they are set for good. Second, this problem is going to give me a lot of grief. Switzerland business is not renowned for its after sales service or the time it takes to do repairs. When I had an issue with my Vaio laptop which was still under warranty, they kindly picked it up from my house, repaired and promptly returned it. How's that for good proper service.i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue -
JSAPI - other languages than English; MIDlet - settings loading; JSAPI - al
Hello!
I need to create application which uses speech recognition. At first I thought about using CMU Sphinx (PocketSphinx or, possibly, Sphinx4). Later I thought about JSAPI. (Sphinx somehow uses JSAPI but I don't know what is the difference between JSAPI and Sphinx).
I have read almost all (up to 6.7.9) of the following tutorial: http://java.sun.com/products/java-media/speech/forDevelopers/jsapi-guide.pdf. Unfortunately I couldn't've found one important thing, i.e. how to create acoustic model for other language than English?
Thanks in advance for your answers :-)!
PS There are some other things which I'd like to know:
1) How to load some settings from file (I guess nowadays configuration files are created with the use of XML but I dunno)?
2) How to maintain algorithm which is used by MIDlet which involves JSAPI? I mean there are some different things which my MIDlet needs to do. I guess it is good habit to divide different goals into separate parts of code (due to object-oriented programming).
In my case there are some different things:
a) speech recognition of audio input, i.e. changing input audio stream into output text string
b) analysis of that text string and according to this string choosing the proper transition in my algorithm
In general I have written my algorithm on sheet of paper and it takes about ten A4 sheets of paper. Because of it I thought there should be some way to write this algoritm maybe outside the code, in some kind of file which would contain this algorithm. Maybe there is other good way to implement this algorithm, not necesarilly in the code.
c) sending of results through httpconnection with the use of POST method
d) receiving in on TomCat on server
3) Which method should I use to receive the recognized speech? I found these:
a) FinalRuleResult, b) Result -> getBestToken, c) getSpokenText, d) ResultToken of RuleGrammar
4) Can you give me any full examples of JSAPI usage? (Not just short parts of code like in this JSAPI guide)?
Greetins :-)!Praveen, Yes the infoobject is language dependent. The problem did not happen in BWQ but came up in BWP. so I am not sure at this time what is causing in production that didn't happen in BWQ.
Thanks,
Syed. -
B2Bconsole in any other languages than English?
Does anyone know if there is a civilised way to localize the B2Bconsole GUI, to display in any other language than English?
I have found no documentation nor settings, and not sure if there is any way to do it (except for decompiling the orignal one, or writing you own console...).
thanks,
NorbertDheeraj,
Sincerelly, I don't think you will have prepared translation to Polish , but maybe? If not, is there any possibility to create such a translation oneself? -
How can I change my auto-correction language from english to french?
My system language is english, so all the default language is also in english
but how can I change the auto-correction language from english to french and without changing the menu language?
Message was edited by: MarixomiaIt's just, I want to change my spelling checker from english to french, that when I type some words in wrong order or miss some, I can know that.
For now, when I type in french, almost every words are underlined by the red lines... -
I set my passcode in Arabic then I changed the language to English, when I wanted to open my ipad later there was no Arabic letters to enter my Arabic passcode..and I am not able to use my Ipad again please advice me what to do
Hello Shaholeh87,
Do you see a Globe icon on left hand side of your Spacebar if yes try pressing that and see if you get an option of changing the keboard language (this will work if you have Multiple language set on your iPhone from Settings>General>Keyboard>International Keyboards and added a keyboard in Arabic Language before )
Or you can get your iPhone in Recovery Mode and Restore it to Factory settings but you will lose all your current Data that you have on your iPhone.
To Restore your iPhone by taking it in Recovery Mode you can follow the below steps :
Follow the process mentioned below step by step to get your iPod Touch/iPhone/iPad working.
Make sure you have Latest Version of iTunes (11.1.3) Downloaded and Installed on your Computer, if not then you can download the latest version of iTunes from the Link below.
http://www.apple.com/itunes/download/
Now once you have the Updated version of iTunes installed on your computer follow the below steps to get your iPod Touch/iPhone/iPad in Recovery Mode and Then restore it to factory settings
Open iTunes Application on your computer and then start the process step by step
1>Disconnect your device from the computer (if connected). The process won’t work if you start with the iPod Touch/iPhone/iPad connected to the computer. Leave the cable connected to the iPod Touch/iPhone/iPad, as you will be reconnecting the iPod Touch/iPhone/iPad to the Computer later in the process.
2>Power down your device. Turn off your device by holding down the Power button ( On Top right corner of iPod). When the power slider appears, slide it to the right. Wait for your device to comepletely shut down before continuing.
3>Press and hold the Home button (Home Button is located at bottom of your iPod Touch/iPhone/iPad screen/display). With the Home button held connect the device to your computer with the USB cable. When reconnected, your device should turn on.
(If the low battery screen appears, charge your device for a few minutes and try the process again.)
4>Continue holding the Home button. After a few moments, you will see the "Connect to iTunes" screen on your device. This screen is a picture of an arrow pointing from a USB cable to the iTunes logo. When you see the screen you can release the Home button.
5>iTunes will display a message stating that a device in recovery mode has been connected. From there you can proceed to restore your iOS device. Once you see this message click on OK and then click on Restore
Once you click on Restore iTunes will download the Latest available version of iPod Touch/iPhone/iPad software (ipsw file) in your computer and after the download is completed the same will be restored in your iPod Touch/iPhone/iPad. You will see the Download process and Restore process on top of your iTunes screen. Once the restore is completed your iPod Touch/iPhone/iPad will automatically restart and you will see a message that iPod Touch/iPhone/iPad has been Restored and will connect after restart.
Now you will have to follow some steps on your iPod Touch/iPhone/iPad to Customize your Device for First Use.
Hope this process will help you -
Help- Urgent- Multi-folio app not showing all languages
I created a multi-folio app in 6 languages. English the default. English shows up in app store but all the other folios for German, Italian etc don't show up. They are all published and public. I changed my ipad to Italian and I still dont' see Italian as an option. The English showed up. I also submitted the app under all 6 languages when building in App Builder and then created all the language profiles in Itunes connnect.
What's weird now that I think about it in Adobe Publisher online there is nowhere to specify a language or when I uploaded the folios there was no way to specify a language. So I think the problem is that Itunes doesn't see the other 5 languages? I just can't figure out what is wrong here and there is no documentation on the web or from adobe.
Please help as my client is going nuts as am I.
Post here but feel free to email me directly as well as this is urgent.
[Edited at request of poster]
Thanks!Thanks for responding. I'm trying to follow you. Right now only english shows in the viewer but there are 6 folios. There is a different folio for each language, all published and all apart of the app, same ids etc. So, I guess what you are saying is the only way to get those languages to show up is to use is to use filters?
My understanding was if I created a multi-folio with 6 folios they will all show up. But right now only one is showing up for English. All the otherlangues don't show up in the viewer. I have no idea why? Shouldn't all the languages show up? I'm been trying to figure out where is the missing setting.
If you create a multi-folio all folios should show up for everyone regardless of language, right?
Creating different app for each language is not an option. They spent thousands for the professional account to do this. There must be a setting somewhere I'm missing.
I just looked up filters. Was I supposed to use that for the other folios?
Thanks again for helping. -
IE7 settings in other languages than english
Hi all,
I have a question concerning the IE7 settings for CRM (PCUI, WebUI):
From the SAP support we received the recommended settings in english. We have several users in different countries and their Internet Explorers are in in french or hungaria or whatever.
Now the questions is: are there documents with the IE7 settings in other languages than english? Or do the users have to compare the english settings with their version of the IE?
What is your experience with this?
Thanks for your help!
Greetings
AnneBy typing in a language other than English. You can change the keyboard to more suitable forms for many languages.
"Add international keyboards:
1 Choose General > Keyboard > International Keyboards.
The number of active keyboards appears before the right arrow.
2 Tap “Add New Keyboard…,” then choose a keyboard.
You can add as many keyboards as you want. To learn about using international keyboards, see Appendix A, “International Keyboards,” on page 248.
Edit your keyboard list: Choose General > Keyboard > International Keyboards,"
From page 199 of the User Guide: http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf -
I live in Japan but my language is English. How can I sign up in English?
I live in Japan but my language is English. How can I sign up in English?
That was a problem in the past. With the new design I now see that all pages are in English, even though I am in Japan.
From where do you try to sign up (for Creative Cloud)? I see everything in English at https://creative.adobe.com/plans
If you don't see that page in English, you can change the language at the bottom of the screen. (If the language selection is shown in Japanese, "English" is 英語) -
How to set AppStore language to English If my Billing in another country?
I'm really upset cuoldn't find answer still, and only found that it's impossible to set language to English, if, let's say,my billing address is in Russia.
What if I'm traveling or can only have access to card in different country?
I agree to see some Russian apps in AppStore, but some Applications switch to Russian as well as soon as I pick it as my country. (e.g. Reminders, the whole app is in Russian though I have English set in Settings).oleg.lestat wrote:But still when i setting cursor in Google Chrome addrese bar, or my vpn client password field it switches to russian
Changeing language (e.g. to have english menues or keybord layout) on a system, took place in applications too only if the application supports that language, or uses by default the system librarys to adopt the language settings.
Not all applications use automatically the system librarys of your Mac for language settings or spell checking. Most will do so, some only during installation, some never.
Applications can have own language settings others have only the installation language available.
Have you checked this on Chrome (Wrench -> Options -> Advanced -> Change Fonts and language settings -> Language -> Google Chrome language) and your VPN Client?
Lupunus
Maybe you are looking for
-
How do I move my toolbars up or down?
I have several toolbars and they are not in the order I want them to be. I want to move a toolbar to the top and one to the bottom. How do I do that?
-
How can i download music from my computer to my i phone
how can i download music from my computer to my i phone?
-
I'm getting this error message how to fix this I have tried uninstalling Pc Suite and NSU and everything else from nokia and reinstalled PC Suite but still can't update NSU and install new version.... "Error 1714: The older version of Nokia software
-
I can not activate the minimized window task manager, even when I end the procedure of taskmgr.exe, its minimized icon is still there in the gray masked system tray.
-
Screen black after mountain lion install
After install, the screen connected to the original video card is black, other 2 screens connected to evga gtx 285 are ok. do i need a new video card?