Exclude Completed To Dos from a List print

How do you exclude completed To Dos from a List print out? I don't want to delete them, because I sometimes need to look up a completed To Do, but I don't want them to be printed when I only need the current ones in a list. Any ideas?
Spot.
P.S.: If this topic has been answered before and you know where it can be found, please post the link in a reply. I looked through the forum, but I didn't find anything concerning this.

Well, it looks like you can't control that with the print options.
You could move completed to-do's to a different calendar and turn off that calendar when printing. I imagine that would get to be a pain very quickly. I guess you could create an applescript that moves completed to-do's to a different calendar and run it every time before you print the list. (Still seems like a lot of work)
Powerbook G4 1.5 GHz   Mac OS X (10.4.8)   1.5 GB Ram

Similar Messages

  • Is there a way of excluding Time Machine from drives list?

    Every time I save a file or an application scans the drives on my iMac, the Time Machine drive is included.
    But because the HDs in the external drive (Iomega) go to sleep between Time Machine back ups, they have to spin up (2 HDs in a RAID setup, so both have to spin up) before the application can go on. That takes something between 5 and 10s every time.
    Is there a way of excluding the TM drive from the normal drives list? So that it's invisible to applications?
    Cheers,
    Marco

    if it is spotlight that i s scanning your drives, add the time machine drive to the privacy area in system prefs:spotlight:privacy. either drag the drive to the window or click the + buttonon bottom right.

  • When cd jewel song list is printed from play list in Itunes, the list is compressed and unable to read.No problem before lates software change. How do I fix this ?

    When song list is printed from play list in Itunes for inserting into CD jewel case, the song list is compressed and is indecipherable. Did not have this problem prior to latest software change.How can I fix this ?

    Can you play the song in iTunes?
    If you can't the song file is probably corrupt and needs to be replaced.

  • Excluding Block for Payment Invoice from Correspondance list in F.62 tran

    Hi All,
    My requirement is Excluding those invoices for which Payment Block indicator is 'P' from Correspondance List in Transaction F.62 for SAP11 Variant. i.e. BSEG-ZLSPR = 'P'.
    Kindly advise me is there any BADI or User Exit or any other possibility to do the same.
    Regards
    Divekar Mahadev

    Whilst the invoice is blocked you can still clear it, as a user might want to clear it and then re post the invoice.
    The only way to stop the line being used in F-32 is to have an open payment run against the line - something I would not recommend.

  • I am English but I live in Spain. when I try to download an app now, as well as my password i get asked to complete a security question from a list. The problem is the list is in Spanish. How can I turn this additional security off

    I am English but I live in Spain. when I try to download an app now, as well as my password i get asked to complete a security question from a list. The problem is the list is in Spanish. How can I turn this additional security off.
    Please note: I dont speak Spanish.
    Please HELP

    You can't turn it off.

  • My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

    My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

    My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

  • Exclude standard vi.lib files from VI list

    Greetings all,
    I just inherited a rather large program that is running on a system. This program uses quite a few dynamically loaded vi's that are being pulled in from various locations. the program is also still running as a VI as opposed to an executable. I have been tasked with re-writing a good portion of it and creating an executable/installer. Of course, the German contractor who wrote the bulk of it is no longer around and nobody knows anything about it. My main problem is that there are many, many versions of vi's sitting in about 50 folders that are being used. Only one of the versions is being actually loaded and executed. I had no way of knowing which vi's are being used so I wrote a little vi that lists all the vi's currently loaded in memory. It works well enough in that it returns the vi name along with the directory path. When I build the executable, I don't want to simply add all the folders with their myriad vi's to the project, only the ones that are actually being used.
    I have two questions actually:
    1) Is there a better way of doing what I did here? (I have attached my little vi)
    2) I would like to exclude the standard Labview vi.lib vi's from the list as those will automatically be included in the build. Otherwise I will have to sort through the entire list to determine which are actually "man made" versus NI built-in.
    I have attached my little "Get Open Vi's List" vi. Please feel free to make any suggestions/changes. I am using version 8.6 so nothing later than that pls.
    Thanks for the help.
    Attachments:
    Opened vi list.vi ‏9 KB

    The OpenG toolkit has a VI called 'List VI hierarchy', these are split from user.lib/vi.lib and other VIs.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Hello Apple. Yesterday I have purchased app «OS X Mountain Lion», but it didn't download completely and disappeared from my purchased list. Need you assistance.

    Hello Apple.
    Yesterday I have purchased app «OS X Mountain Lion», but it didn't download completely and disappeared from my purchased list.
    Need you assistance.

    See if the purchase is hidden:
    http://support.apple.com/kb/HT4928

  • Exclude business partners from mailing list

    When business partners do not want to receive emails, mails or other marketing information how do we make sure CRM understands this and they are excluded from mailing lists?

    Hi King,
    To achieve this, you can use the marketing attribute for the BP. You can create a custom attribute as 'DONOTCONTACT' and then assign the same to an attribute profile. Then, you can set this marketing attribute of the business partner and track whether we want to send the mail or email to him.
    Refer the following transactions :
    CRMD_PROF_CHAR
    CRMD_PROF_TEMPL
    CRMD_PROF_BP
    <b>Reward points if it helps.</b>

  • I transfered my contacts from my iphone 4s to 5s, all contacts have been transfered but they are not displayed completely in my viber contact list. Actually in my viber contact list there are only those contacts who are from iphones! Please help

    I transfered my contacts from my iphone 4s to 5s, all contacts have been transfered but they are not displayed completely in my viber contact list. Actually in my viber contact list there are only those contacts who are from iphones! Please help

    How did you transfer these contacts from one device to the other?

  • Abap Lists - Printing - defining font and CPI and applying to printed text

    Hi,
    I am trying to define some forms for matrix printing. I should change the font type, and CPI.
    We will print ABAP Lists.
    I see my fonts (courier, 100, 12CPI, Prnt.Ctrl SF005) are defined in SE73.
    In SPAD - device type (choose spec. one) u2013 Print Controls (tab) I can see SF005, marked u201EDirectu201C column, as well as u201EHexadecimalu201C. Control Character Sequence is 1B6B001B4D121B57001B461B35.
    I can see 31 more SFxxx Print controls here.
    How do I apply specific Print Controls (SF005) from this list to a printed document? (I assume this is the list of available prnt.ctrls that can be used for printing, but how do I "select" specific ones and apply them to document print?)
    How do I choose u201ECOL0N: Color off, normal fontu201D (intensified OFF u2013 I heard that sap print in bold by default)?
    Thanks in advance,
    cheers,
    Nenad
    P.s. u2013 in printer settings the default font is Coourier 10, 12CPI, draft output. If I change this settings on printer directly, no effect is applied on printed documents... Printing from ECC 6.0
    Edited by: Nenad Nikolic on Oct 26, 2010 4:49 PM - details...

    hi again,
    more info:
    In Formats (Z_fakt1) - Formats (tab): u201EPrinter initializationu201C, I can see some predefined settings, but it is copied from some IBM printer, and I wonder is it correct. There is nothing about font type:
    #reset
    \e\0x40
    select US-ASCII character set
    \e\0x52\0x00
    set line spacing 6 LPI
    \e\0x32
    set page length to 12 inch (=72 lines at 6 LPI)
    \e\0x43\0x48
    cancel bottom margin
    \e\0x4F
    set left margin to 0
    \e\0x6C\0x00
    select draft quality
    \e\0x78\0x00
    select non-proportional spacing
    \e\0x70\0x00
    cancel condensed printing
    \0x12
    disable double-width printing
    \e\0x57\0x00
    select 10 CPI
    \e\0x50
    Result here is: 11CPI. Bold. Looks like "Times New Roman"
    The exact copy from IBM printer is used for another format (Z_fakt2), nothing is different except:
    select 12 CPI
    \e\0x4D
    Result here is: 10CPI. Bold. I am under BIG impression that the font type is different. But it is possible the font looks different just due to a size difference. Looks like "Courier New"
    In both cases I print predefined text with same output device, same device type.
    When I set 15CPI (0x67) u2013 I still get 10CPI, just the font looks more plain, more "draft" then before - like once in DOS. I am certain that these font type is definitely different then before (for example, here "W" have parallel endings). These fonts are even more suitable for these reports...
    Shouldn't the fonts be SMALLER and more of them in 1 inch (15 characters per inch) now then 10CPI (10 character per inch - less characters to fill 1 inch)??
    If I set 1CPI - shouldn't there be just 1 big character on 24,5mm?
    When I delete all entry (except # reset \e\0x40) from "Printer initialization" for one Format, the print output looks exact as before deleting (and saving)?!
    I would like to set Courier font, (really 12CPI), plain text, no bold.
    Where should I set this options?
    Thanks and sorry for long input, but the more info you have, the more insight ou have in my problem...
    Cheers,
    N
    Edited by: Nenad Nikolic on Oct 26, 2010 5:30 PM - update

  • Macbook Pro Retina OSX v. 10.8.3 -Canon Printer MP560. Printer no longer responds to print commands from the computer, printer and network work but cannot get docs from my macbook to print anymore.

    Until last week, my printer and Macbook worked fine together - could print any doc or pdf, web page from my computer. Then it stopped - my printer will still make copies but will not print anything I send from my Mac. I have checked network connections, the printer WiFi connection works. I have not changed or added any thing different to my settings. I am out of ideas. thanks, Pattee

    Hello Pattee,
    The following article has a number of troubleshooting steps that may help get your Printer working again.
    OS X Mountain Lion: Troubleshoot a network printer
    http://support.apple.com/kb/PH11070
    Make sure you’re on the same network
    Your computer might not be able to find a printer that’s on another local network.
    To see if the printer you want to use is on the same network as your computer, try adding it again. If the printer doesn’t appear in the list of available printers, your computer might be on a different network now.
    If you know the printer’s IP address (for example, 192.168.1.100), you can try adding it as an IP printer. For instructions, see this help topic:Set up an IP printer
    Add your printer again
    Try to add your printer again in Print & Scan preferences. If you can print to the newly added printer queue, delete the old printer queue.
    If you can’t add the printer because it doesn’t appear in the list of available printers, it may be turned off, or your computer may be on another network now. if the printer was shared by another user, the user may have stopped sharing it, or the user’s computer may be offline. If you don’t manage the printer, ask the person who does for help.
    Edit your list of printers
    Set up a printer
    Reset the printing system
    If none of the previous solutions work, the printing system may be corrupted and need to be reset. This removes all printers from your list of printers, deletes information about completed print jobs, and deletes any printer presets.
    Reset the printing system
    Cheers,
    Allen

  • Removed app from D110, still printing

    I removed the 7-day menu planner app from my Photosmart D110 over a month and a half ago, and it's still printing every week. It's not in my print apps menu, and I can't change the settings for it, because I removed it. When will it stop? It's wasting paper, and it's just printing the tables for it and not any actual menus. HALP!

    Hello,
    I found a document that address your issue. Here's a link to the document and here's the part that pertains to your question.
    Remove a scheduled deliver print app:
    NOTE: 
    Be sure to complete Step one before performing Step two. If you remove the Scheduled Delivery Print App without first cancelling the scheduled delivery, the product will continue to receive and print pages for the App. If this happens, follow the steps in the Setting up a Scheduled Delivery Print App section of this document to first add the App back. Then follow Steps one and two in this section.
    Step one: Cancel the Scheduled Delivery Print App
    Log into ePrintCenter .
    Click the Apps tab.
    Select the HP Photosmart D110 tab.
    Click the App that you want to remove.
    Click Setup .
    Click Update Settings .
    Click Cancel scheduled delivery .
    Click the Cancel Subscription .
    The Scheduled Delivery Print App’s icon is still listed on the product control panel display, but the scheduled deliveries are actually canceled. This allows you to access the Scheduled Delivery Print App at any time. To remove the Scheduled Delivery Print App completely, continue to the next step.
    Step two: Remove the Scheduled Delivery Print App completelyAfter completing Step one, follow these steps to completely remove the Scheduled Delivery Print App completely, so that it does not display in ePrintCenter or on the product control panel.
    Log into ePrintCenter .
    Click the Apps tab.
    Select the HP Photosmart D110 tab.
    Click the App that you want to remove.
    Click Remove .
    The App is removed from the list of Apps in ePrintCenter and the product control panel display.
    Miles
    HP Employee

  • Reading items from a list view in SharePoint 2013

    I am trying to read items from a Calendar, and have created a view that contains all the items/events that I would like to retrieve to package in a CSV file, specifically the Title, Description, and the Start and End Dates.
    The problem with some events is that they are recurring, and rather than use CAML to expand the events and try to query it that way, I thought it would be more elegant to just get the events from the view, and package them with a simpler query.
    The problem I am running in to is that I can reference the entire list and package the data, or I can reference the list and get all the data in a specific date range, which does not include the recurring events, but I cannot simply read the data from the
    view.
    Any pointers would be greatly appreciated. Also, can you recommend any complete-ish texts on PowerShell with SharePoint?

    Hi,
    Based on my understanding, as there is no straight way of using CAML to query all the events(specially for instances of recurring events) by a list view, I would suggest
    you separately query the instances of recurring events needed.
    A code demo(though in C#) about
    how to query events(include recurring events) from Calendar list in this thread for your reference:
    http://social.technet.microsoft.com/Forums/en-US/99c3ded6-a8cb-4509-9a74-e93e445d78c7/how-does-calender-list-daterangesoverlap-todaymonthyear-and-week-exactly-work?forum=sharepointdevelopmentprevious
    About
    how to export to CSV file:
    http://www.codeproject.com/Articles/667269/Export-To-CSV-file
    http://www.codeproject.com/Articles/685310/Simple-and-fast-CSV-library-in-Csharp
    How to export to CSV file using PowerShell:
    http://shaiknb.wordpress.com/2013/05/27/powershell-sharepoint-export-list-items-via-view-to-csv/
    http://meandmysharepoint.blogspot.com/2012/08/export-sharepoint-list-data-into-csv.html
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they
    help and unmark them if they provide no help. If you have feedback for TechNet
    Subscriber Support, contact [email protected]
    Patrick Liang
    TechNet Community Support

  • Getting multiple values from a list box

    Hi,
    I am not able to get multiple selected values from a list box using the getParameterValues(). I used the following code..
    String[] names=request.getParameterValues("lname");
    can anyone tell me what the error is or is there any other way i can get multiple selected values from a list box.
    Thanks
    Satish

    Fragment 1
    This is the JSP Code am using for testing
    <%
    String[] name =request.getParameterValues("D1");
    if(name.length==1)
    String value=name[0];
    Instead of name.lenght==1 try with name!=null
    Fragment 2
    out.println(value);
    replace the above fragment with
    %>
       <%-- print result -->
       <%=name[0]%>
    <%
    Fragment 3
    else
    %>
    The list box D1 is a multiple select list box.
    If it still doesn't work, check that the checkboxes have the same name as well as different values
    <input type="checkbox" name="D1" value="1">
    <input type="checkbox" name="D1" value="2">I hope this helps :-)
    Good luck
    touco
    ps: i want duke

Maybe you are looking for