Exclude date filter.. no data

hi,
my scenario is that im reporting on an infoset . the query has an exclude date filter(1/1/1800,31/12/9999).query for this is there on both production and dev systems. but the report is not getting populated in the dev side(no applicable data found) . on the prod side everything s working fine . i cant afford to open and do anything in prod side. so any suggestions from your side?

it has nothing to do with infoset. we checked the same query in dev replacing the exclude condition with select option in filter and it is working fine.

Similar Messages

  • Data Filter in Data Selection -DM

    Hi ALL,
    I am facing problem in loading blank value data to BPC. Scenarion is
    Account In BI has Hier as ACT_1
                                              ACT_2
                                             ACT_3
                                             ACT_4
                                             UNassigned - In data base it has balnk and when you report in BI you can see as #-(Un assigned as a text descrption)
    in my data manager i need to select the or filter the accounts by Hier as shown above
    i can select as ACT_1, ACT_4 but i need to select the blank value also i need to set the filters for unasigned but BPC data manager package will not allow the UNASSIGNED Value to be select.
    Any idea on this can i handle some ho in transformation,
    Thanks in advance
    Regards
    Ram

    Hi,
    Based on my test, Data filter does not lost when we re-open the file in Excel 2013. Thus, I think it is not a bug. Thus, please provide us more information to assist you better.
    Did this issue occur with the previous file that created with Office 2010?
    Have you tried to re-create a new file to test?
    If this issue occur only with the previous file that created with Office 2010, this issue might be caused by the file compatibility, pleases use compatibility checker to update the files:
    https://support.office.com/en-ca/article/Check-file-compatibility-with-earlier-versions-d9856881-5875-4c58-915f-06859b2943a7
    If this issue occur with all files even with a new file, please try to repair Office 2013.
    Hope it's helpful.
    Thanks
    George Zhao
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click "[email protected]"

  • IR Date Filter - My date field is MM/DD/YYYY users want to filter by same

    Hi,
    I have a interactive report that has a date field and I put a "MM/DD/YYYY" display format on it.
    The filter uses DD-MON-RR format in filtering which works fine but the users want to filter by same format of MM/DD/YYYY because they want to type it in. Is there a way to change the date format of the filter to match the display format of the fileld?
    Also, if a valid date is entered in the wrong format no error occurs just no data.
    Thank you,
    BillC

    Hi Billj,
    I am not quite clear about your question. For the date field in the form you can create a validation for valid date and that will not accept the input if user type invalid date. if you want to format that date field in the form you can do that as well by choosing the date picker with your expected format (Date picker(dd/mm/yyyy).
    Hope this will help,
    Thanks,
    M Tajuddin
    http://tajuddin.whitepagesbd.com

  • Need to personaliza table to add data filter

    I have developed a custom page with 2 buttons and a simple table.
    I need to personalize the page to add data filters. I tried to do the same by clicking on the Query personalize link for the table personalization.
    The Create Query page opened up, but the data filter section shows the following
    Data Filter
    No data filters can be created for this region.
    Can somebody throw some light on this.
    Thanks in Advance

    What data you need to filter???
    Thanks,
    Gaurav

  • Performance issue on Date filter

    In my where condition I wanted a date filter on sale date.  I want all sales after 9/1/2014.   
    CASE1
    If I explicitly use date filter like 
    SaleDate > '2014-09-01 00:00:00:000' I am getting the result in 2 seconds.
    CASE2
    Since I may need to use this data value again, I created a date table with single column "date" and loaded the value '2014-09-01 00:00:00:000' . 
    So now my where is like 
    SaleDate > (Select date from dateTable)
    When I run this , the result does not show up even after 10 mins. Both date types are datetime. I am baffled.  Why is this query not coming up with the result?

    As mentioned by Erland, for the optimizer, both situation are very different. With a literal, the optimizer can properly estimate the number of qualifying rows and adapt the query plan appropriately. With a scalar subquery, the value is unknown at compile
    time, and the optimizer will use heuristics to accommodate any value. In this case, the selection for all rows more recent than September 1st 2014 is probably a small percentage of the table.
    I can't explain why the optimizer or engine goes awry, because the subquery's result is a scalar, and shouldn't result in such long runtime. If you are unlucky, the optimizer expanded the query and actually joins the two tables. That would make the indexes
    on table dateTable relevant, as well as distribution and cardinality of dateTable's row values. If you want to know, you would have to inspect the (actual) query plan.
    In general, I don't think your approach is a smart thing to do. I don't know why you want to have your selection date in a table (as opposed to a parameter of a stored procedure), but if you want to stick to it, maybe you should break the query up into something
    like this. The optimizer would still have to use heuristics (instead of more reliable estimates), but some unintended consequences could disappear.
    Declare @min_date datetime
    Set @min_date = (SELECT date FROM dateTable)
    SELECT ...
    FROM ...
    WHERE SaleDate > @min_date
    If you use a parameter (or an appropriate query hint), you will probably get performance close to your first case.
    Gert-Jan

  • How to filter the data in different sections (e.g. Report Footers)?

    Hi,
    I am using Crystal Reports 11 to generate cross-tables.
    I plan to generate 3 cross-tabs, and each cross-table will be put in a section. For example, cross-tab1 in Report Footer a; cross-tab2 in Report Footer b; cross-tab3 in Report Footer c.
    I know use "Select Expert" to filter data. But, it seems that "Select Expert" filters data for the whole report.
    I want to filter the data for each cross-table separately. For example, filter cross-tab1 based on condition1; filter cross-tab2 based on condition2; filter cross-tab3 based on condition3.
    How to filter the data in different sections (e.g. Report Footers)?
    Thank you in advance.

    Hi,
    Now that you've inserted the subreport just right-click the sub-report and click Edit. The Design page for sub-report should open up.
    You can now insert the cross-tab on the Report Header and insert a record selection formula of your choice.
    Also, suppress all the other sections of the subreport so the Main report only shows the crosstab without any spaces.
    Do the same for all the subreports.
    -Abhilash

  • How Do I Filter a Report Using a Multi Select List Box and Specifying Date Between Begin Date and End Date

    Hope someone can help.  I have tried to find the best way to do this and can't seem to make sense of anything.  I'm using an Access 2013 Database and I have a report that is based on a query.  I've created a Report Criteria Form.  I
    need the user to be able to select multiple items in a list box and also to enter a Begin Date and End Date.  I then need my report to return only the records that meet all selected criteria.  It works fine with a ComboBox and 1 selection but can't
    get it to work with a List Box so they can select multiple items.  Any help is greatly appreciated while I still have hair left. 

    The query should return all records.
    Let's say you have the following controls on your report criteria form:
    txtStart: text box, formatted as a date.
    txtEnd: text box, formatted as a date.
    lbxMulti: multi-select list box.
    cmdOpenReport: command button used to open the report.
    The text boxes are used to filter the date/time field DateField, and the list box to filter the number field SomeField.
    The report to be opened is rptReport.
    The On Click event procedure for the command button could look like this:
    Private Sub cmdOpenReport_Click()
    Dim strWhere As String
    Dim strIn As String
    Dim varItm As Variant
    On Error GoTo ErrHandler
    If Not IsNull(Me.txtStart) Then
    strWhere = strWhere & " AND [DateField]>=#" & Format(Me.txtStart, "yyyy-mm-dd") & "#"
    End If
    If Not IsNull(Me.txtEnd) Then
    strWhere = strWhere & " AND [DateField]<=#" & Format(Me.txtEnd, "yyyy-mm-dd") & "#"
    End If
    For Each varItm In Me.lbxMulti.ItemsSelected
    strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
    Next varItm
    If strIn <> "" Then
    ' Remove initial comma
    strIn = Mid(strIn, 2)
    strWhere = strWhere & " AND [SomeField] In (" & strWhere & ")"
    End If
    If strWhere <> "" Then
    ' Remove initial " AND "
    strWhere = Mid(strWhere, 6)
    End If
    DoCmd.OpenReport ReportName:="rptMyReport", View:=acViewPreview, WhereCondition:=strWhere
    Exit Sub
    ErrHandler:
    If Err = 2501 Then
    ' Report cancelled - ignore
    Else
    MsgBox Err.Description, vbExclamation
    End If
    End Sub
    If SomeField is a text field instead of a number field, change the line
            strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
    to
            strIn = strIn & "," & Chr(34) & Me.lbxMulti.ItemData(varItm) & Chr(34)
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Use presentation variable in date filter

    Hi,
    I have a Date presentation variable pvEffDt whose value is set in a dashboard prompt. How do I access this variable in a Date between filter? I actually need data for chosen date's previous month (weird, why don't I choose the previous month itself. yeah true, but I want to try something else).
    I have tried the following but to no avail - CAST (TIMESTAMPADD(SQL_TSI_MONTH, -1, cast('@{pvEffDt}[MM/DD/YYYY]' as TIMESTAMP) as DATE)
    I get the following error -
    Odbc driver returned an error (SQLExecDirectW).
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27002] Near <(>: Syntax error [nQSError: 26012] . (HY000)
    SQL Issued: {call NQSGetLevelDrillability('SELECT "AFM"."GRP_ID" saw_0, "HIER_DEF"."HIER_DSC" saw_1, "HIER_DIM"."CD_DSC_LV1" saw_2, "AFM"."HIER_ID" saw_3, "AFM"."ATTR_REF_DIM_KEY" saw_4, "AFM"."RPTD_CURCY_CD" saw_5, "AFM"."BMARK_ID" saw_6, "AFM"."WT_TOT_ADJ_ACCT" saw_7, "AFM"."WT_TOT_ADJ_BMARK" saw_8, "AFM"."PCT_CONTRIB_BASE_ACCT" saw_9, "AFM"."PCT_CONTRIB_LOCL_ACCT" saw_10, "AFM"."PCT_CONTRIB_BASE_BMARK" saw_11, "AFM"."PCT_CONTRIB_LOCL_BMARK" saw_12, "AFM"."SEC_SEL_BASE" saw_13, "AFM"."SEC_SEL_LOCL" saw_14, "AFM"."MKT_ALLOC_BASE" saw_15, "AFM"."MKT_ALLOC_LOCL" saw_16, "AFM"."INTERACTION_BASE" saw_17, "AFM"."INTERACTION_LOCL" saw_18, "AFM"."CURRENCY_EFFECT" saw_19, "AFM"."TOT_EFFECTS_BASE" saw_20, "AFM"."TOT_EFFECTS_LOCL" saw_21, "AFM"."SEC_SEL_BASE" - "AFM"."SEC_SEL_LOCL" saw_22, "AFM"."MKT_ALLOC_BASE" - "AFM"."MKT_ALLOC_LOCL" saw_23, "AFM"."INTERACTION_BASE" - "AFM"."INTERACTION_LOCL" saw_24, "AFM"."TOT_EFFECTS_BASE" - "AFM"."TOT_EFFECTS_LOCL" saw_25, "AFM"."EFF_DT" saw_26 FROM "Perf Attr" WHERE ("HIER_DIM"."CD_DSC_LV1" <> ''Total'') AND ("AFM"."GRP_ID" = ''3699'') AND ("AFM"."ATTR_REF_DIM_KEY" = 2) AND ("AFM"."EFF_DT" = ADD_MONTHS(DATE ''10/31/2012'', -1))')}
    Regards,
    Vijay.

    I had already tried this before and it didn't work either.
    Just to point it again, I am defining this In the filter, under More Options->Presentation Variable.
    i have also tried doing "Convert this filter to SQL" and passed
    ("ATTR_FACT_MTHLY"."EFF_DT" IN (ADD_MONTHS(@{pvEffDt}, -1)))
    Just to verify the same, I tried
    ("ATTR_FACT_MTHLY"."EFF_DT" IN (ADD_MONTHS(TO_DATE('31/10/2012', 'DD/MM/YYYY'), -1)))
    but even this did not work.
    I really don't know how to make it work. I simply need the filter to have the value "Chosen date's previous month".

  • How to create a data filter for BAPI used in a Distribution Model ?

    I am trying to create IDOC's for a QM inspection plan via message type QPMK in ECC 6.0. When creating the new message type in the Distribution Model, it forced me to use a BAPI (MasterInspectionChar) rather that just the message as I have done in the past. In order to ensure that only IDOC's related to a specific plant and material type get sent out, I was trying to create a filter.
    I am able to get into a 'Change Filter' dialog by double clicking 'No data filter set' under the node 'MasterInspectionChar.SaveReplica'. However, an attempt to highlight anything on this dialog and clicking button 'Create filter group' results in msg. 'Select node: Content-dependent parameter filtering'.
    Online help led me in a different direction, one thread led me to believe I needed to create a table entry for the filter in table TBD16 via BD81 for later attachment to the BAPI in the Distribution Model. Before this, I created two Z* ALE Object Type records for plant and material type in table TBD11 via BD95 for what I thought would provide a lookup back in BD81 for creation of a new filter record, but these objects are not found. Per the help, I am also unclear as to whether I would need to set up Receiver determination or Parameter filtering, nor where to make this step in the configuration happen?
    Can anyone point me back in the correct direction to get a data filter set up for this BAPI within the Distribution Model ?
    Thanks - Mike

    Just to clarify, what I am having trouble with is finding where exactly to plug in the name of the plant to be filtered? If using a message type such as MATMAS in a distribution model, it is very straight forward to navigate down from the 'Data filter active', and assign a value to whatever field you wish to filter via the 'List of Values'.  But in this example, message type QPMK required use of the BAPI MasterInspectionChar, and therefore the different method in creating the filter. 
    I cannot find similar functionality when navigating the BAPI related row, for MasterInspectionChar. The 'Change Filter' dialog popup displays a row for 'Container' and then 3 more rows containing 'BAPI structure...'.   Clicking the 'Attribute' checkbox on any of these rows sets 'Data filter active' as a node under the BAPI.  Double clicking the 'Data filter active' brings me back into the same dialog, and selecting any row with an attempt at this point to create a filter results in the 'Select node: content-dependent parameter filtering' warning.  Is this warning occuring because of missing configuration?
    Thanks - Mike

  • Row Level Security - Data filter - Roles Variable Not working in OBIEE 11.1.1.7.1

    Hi all,
    Previously, we were using OBIEE 11.1.1.5.0 and we were able to assign users to application roles by using the initialization block to assign the ROLES session variables.
    1. My USER_SECURITY table in Oracle database:
    USER_NAME | USER_ID | ROL
    user1       | 1723    | GobalDataRole
    user2       | 1739    | GobalDataRole
    user3      | 1743    | GobalDataRole
    2. The SQL query in my session initialization block:
    select USER_NAME, USER_ID, ROL
    from USER_SECURITY
    where USERNAME = ':USER'
    3. The row-wise initialization option is not checked.
    4. In the Oracle Enterprise Manager Fusion Middleware Control, we created new application role: GobalDataRole and sync with rpd.
    5. The GobalDataRole is used in the RPD to filter the data under permissions --> data filter. GobalDataRole only has access to Country A data.
    6. Result: under my account, also in rpd Manage --> Sessions, user variable details
    User_name , user_id & Rol variable is working fine as expected,
    When we log in as user1, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
    When we log in as user2, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
    When we log in as user3, we can see in My Account, user assigned to: BI Consumers; Authenticated Role; GobalDataRole
    User1, User2, and User3 are able to see the data correctly according the their data access setup.
    Now, we using OBIEE 11.1.1.7.1 and using the same method, but we not able to assign users to application roles by using the initialization block to assign the ROLES session variables anymore.
    Result:
    User_name & user_id variable is working fine as expected, but the ROl variaible is not capturing the DB value,
    When we log in as user1, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
    When we log in as user2, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
    When we log in as user3, we can see in My Account, user assigned to: BI Consumers; Authenticated Role
    User1, User2, and User3 can see all data (which is wrong) because they are not assigned to the correct application role that sets the data restriction/filter.
    Has anyone encountered the same issue? Any advice on how to solve this?
    Thanks in advance!
    Satheeshkumar P

    Thanks user10615659     ,
    - Yes the variable ROLES available in OBIEE 11.1.1.7.1
    - Tested the init block and variables in offline rpd its working as expected.
    - In online rpd, except ROLES and GROUP variable remaining variables working fine.
    - Verified log file in both online and offline init block testing - the init block execution is successful.
    Thanks

  • SP2013 - Date Filter Web Part looses connection when used in a site template

    Hi,
    I created two table reports in SQL Reporting Services 2012 and inserted in a web page using the Reporting Service Report viewer in SharePoint 2013 with CU Dez 2013. The two reports require two dates and I use two date filter web parts (I did not try the
    date range solution I saw in the fórum).
    So the user inputs the two dates in date filters that send the information to thereports in the same page.
    They work in the site and I saved it as template. However when I create e new site using it as a templates, the date filter connections are broken and of course, they did not work.
    For another report where I usea text filter, it worked without any problem in the template.
    Does anybody know any workaround?
    Thank you.
    Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

    Hi ,
    The new site based on the saved site template will generate new ID for date filter web part, in the web part page the SPWebPartConnection "ProviderID" value seems still to reference the original date filter web part ID (see from
    SharePoint Designer), as a workaround we can re-configure the web part connection from the web part page manually or programmatically from that new site web part page.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/8d98206d-b41f-4ee4-b537-a4bf5cec0434/sharepoint-2010-save-site-as-template-webpart-connections-broken?forum=sharepointgeneralprevious
    http://sympmarc.com/2007/09/20/removing-a-web-part-connection-in-sharepoint/
    Thank
    Daniel Yang
    TechNet Community Support

  • Data filter using receiver determination/Interface determination

    Hi Friends,
    i have a scenario, which I need to filter the data based on one field that is "Amount field". the source data I am getting as flat file(.txt), The field values is 12 digit(e.g.. 000000000000,009999090000,945884949484).
    I wanted to filter the records by Zeros and  Nonzero means all the records of [000000000000] into one file and another way.
    I used condition editor, it is working fine for string. means if i use 'ABC' in condition (in right appeared) But  it is not if I give same way for  the above, value 0 or 000000000000.
    Thank you
    Bala

    Hi,
    In Receiver Determination window condition box we can mentioned condition. Take two communication channels for '0's records file and non '0' records file
    sourcestructure.field= '000000000000'.............call service1 ('0' records file)
    sourcestructure.field# '000000000000'.............call service2 ( non '0' records file)
    i think your problem will be sorted out

  • Can you filter a date range in Numbers 3.1?

    It seems crazy... but I can't figure out how to filter a date range in the new Numbers (3.1).  In other words, I have a column with individual dates e.g. 31-Dec-2012, 29-Feb-2013, 19-April-2004, etc.
    I want to filter it so that ONLY the dates from 2012 show up.
    The thing is that the new filters ONLY seem to let you filter from today's date e.g. between 494 and 692 days from today.  Obviously, that isn't what I want, and it seems very wierd that something so basic would be left out.
    What am I missing?

    In the example below Column A has date values and Column B has a simple filter that displays dates if in year 2012.  Pretty simple, likely too simple.  Not sure what/how you want to display but thought I'd get something started.  The formula in Column B is: IF(YEAR(A2)=2012,A2,"").  You can hide column A if desired.

  • Date filter not reading dates correctly

    I've noticed that since Bridge CS5 came out, the filter on date is not working correctly. For example,I'm looking at a series of images that I captured today (Sept 7th), and the date shown in the metadata panel of Bridge ays "Today". Yet, the Filter pane shows only "yesterday", not "today" as an option. When I click on "yesterday", Bridge displays the files that I took today! (And for the record, I'm using Bridge on Sept 7th, at 6 PM Pacific time when I'm posting this.)

    Sorry, hope you can read the details...
    Thanks, screenshot is clear, I see it but can't believe my eyes I'm
    afraid....
    Tried to reproduce it on my system but can't achieve this, pictures shot at
    same day as 'today' give today in the filter panel and yesterday also
    correctly filtered.
    You have of course already checked the date and time of your camera?
    But that should reflect also the data in the EXIF shown under file
    properties in the Metadata section.
    Assuming you have already tried to reset the Bridge Preferences (holding
    down option key while restarting Bridge) you could also repeat this after
    having manual deleted the AdobeBridge4.plist file from the preference folder
    in the User library.
    If still no luck, a way to narrow the possibilities down is if you have CS4
    still installed you could try it in Bridge CS4 with the same files.
    If it shows correct in CS4 it might be related to your CS5 install  or to
    NEF from D200 and Bridge CS5.
    If it shows also incorrect in CS4 it might be related with your User account
    or OSX.

  • BO Report Mobile - date filter

    Hello!
    I have a report in BO Mobile developed with web intelligence tool with two fields of sales values​​, one daily and one monthly. I'm having the following problem: when I select a specific date to the monthly values ​​are equal to the daily values​​.
    Could someone help me.
    It is possible to apply the date filter, make the monthly accumulated values ​​remain?
    Sincerely.
    Gleziane

    Hi
    At Universe level you can create two measure values like daily sales and MTD monthly sales =@
    suppose say yu run the query on date 19-5-2014
    for First measure daily sales where date =@prompt value (i.e date prompt)
    for 2nd measure Monthly sales where date<=@prompt value AND Month=month(@prompt )
    the above is for MTD
    Hope this helps u
    Thanks & Regards
    Sunil

Maybe you are looking for

  • Crysis Warhead 64-bit Won't Work with Windows 7 64-bit Under Boot Camp

    Hi. I installed the patch 1.1 for Crysis Warhead which has the 64-bit version of the game which I'm running under Windows 7 64-bit on Boot Camp and I've tried the the compatibility mode (Vista to Vista SP2). I've also updated the ATI drivers as well

  • A few new Illustrator CS4 questions.

    Weird, I just can't figure these out. First, how do you change the document size/orientation when it's already open? This seemed to be a cinch in all other versions of Illustrator, but now... the new Document set-up menu is quite different. Related,

  • Column in apex_application_page_ir_rpt.report_columns not updated. Defect?

    Hi everyone, I discovered the following: I created an IR in my application. First I define the following query for the IR: SELECT * FROM apex_application_page_ir_rpt WHERE application_id = 22333 AND page_id = 2 That works fine. Then, I change my regi

  • How to find the Size of an Idoc With data

    Hi All, There is business case where in the partner needs an Idoc with size 200KB - 250KB  triggerd from SAP. Is there any chace of knowing the size of an Idoc with data before it gets tirrgerd from SAP. Please Help Thanks, Suma

  • Can't Get Menus to show on DVDSP 4.2

    I have loaded DVD Studio Pro 4.2.  It opens just fine but the menus will not show in the pallette.  They are in the folder in the usr/library/application support/dvdstudio pro. What am I missing.  Never had a problem before. Thank you.