Exclude postings from certains accounts from Project Settlement

Hi,
I would like to know if there is a certain config that could exclude postings of CERTAIN ACCOUNTS from Project settlement.
Thanks!
Vivian

Hi,
May I know if you are referring to OKO6 config? We have no included any of those unwanted cost elements for settlement, but during settlement we are getting error saying that allocation structure not complete - so we need to find a way for system to totally exclude posting from those accounts for settlement (instead of showing error)
Thanks!
Vivian

Similar Messages

  • Reverse Charge up of budget again during settlement from project AUC to FA

    With investment profile,
    Charging up of budget during settlement from project AUC to FA is done,
    In order to reverse the budger consumption, is it possible to reverse by FB08 for the AUC to FA posting
    Or it must be done through adjustment?
    Please includes steps and transactions used to achieve the reversal.
    Edited by: Feng Hwa Hui on Aug 12, 2009 10:04 AM

    Question closed.

  • Excluding connections from certain hosts in log file

    Is it possible to exclude connections from certain IP addresses from
    getting written into the log on a 5.0 server?
    I have monitoring systems that do frequent health checks by binding to
    the server and it adds lots of lines to my logs (about 14 MB per day)
    that I don't need or care about. I'd like to exclude these connections
    from showing up.
    thanks,
    Gary LaVoy
    [email protected]

    Gary LaVoy wrote:
    Is it possible to exclude connections from certain IP addresses from
    getting written into the log on a 5.0 server?
    I have monitoring systems that do frequent health checks by binding to
    the server and it adds lots of lines to my logs (about 14 MB per day)
    that I don't need or care about. I'd like to exclude these connections
    from showing up.
    No, this is not possible
    What you can potentially do is to use the log file rotation and do something like a grep -v to supress the lines that you don't want in the rotated file that won't be used anymore by the server.
    Regards
    Daniel

  • Account Determination Error when doing GI for Delivery from Projects

    Hi,
    When we try and Goods Issue a delivery from Projects, we get the following error:
    Account determination for entry 0 GBB 0001 ___ 7900 not possible
    We are not sure why the Account grouping code comes through with no value. Please could someone assist with this issue.
    Regards,
    De Wet

    Hi,
    Check in T code OBYC,whether the account determination is maintained against the valuation class for BPX.
    Regards

  • Removing access from Project creator by admin account

    We are working with Microsoft Project Server 2013 installed with Sharepoint server 2013 
    We have two users U1 and U2 and Admin account as A1
    U1 created a Project P1 and gave owner access to U2
    after that Admin A1 removed U1 from owners list but still U1 is able to browse project with same access level.
    We want to Remove access of U1 from Project P1 with help of admin account.
    Tech Learner

    Change the project owner from U1 to U2 in the project information page in PWA. From the project center, click on the project P1, go to the project detail page and update the "project owner" field for U2.
    Already Did
    Then U2 must set himself as the status manager of the project. Ask the user U2 (be aware that this operation CANNOT be done by the admin) to open the project in MS Project, insert the status manager column and set his name (U2) for all tasks of the project.
    Save and publish the project.
    What is Status Manager ? I can't find such permission level anywhere in Project Server 2013
    See this blog
    from EPMA which explains the procedure very well.
    Not exactly for Project server 2013 
    In case U1 still has the same access to the project, it might be due to your RBS/categories configuration. 
    what is RBS/Categories Configuration n PS 2013 ?
    Tech Learner

  • Copying Certain document types only from project to Solution Directory

    Hello,
       We are in the process of setting up Solution Directory in Solution Manager 4.0 sp12. After creating a solution we'd like to add scenarios from multiple implementation as well as template projects based on the document type.
    We have several document types that we use in various tabs (config, testcase etc) and would like to get only a subset of document types from the soruce projects.
    When trying to use the copy options in the pop-up window the copy filter works only on the documentation tab and does not filter the documents in other tab's based on the copy option filter.
    Is there anyway we can filter the document types upon copy from project to directory. Please let me know if there is any Badi or User-exit for this functionality as well.
    Any Help is much appreciated.
    Thanks
    Rajesh Sundar

    Hi Rajesh,
    I just came across this article and I reckon it will answer your question. Please read the section Documents copied when copying a project.
    http://wiki.sdn.sap.com/wiki/display/SM/Documents+in+Solar01+and+Solar02
    Cheers
    Ganesh

  • ODI : extract datas from HFM filtering on base members of certain accounts

    Does anyone know how to filter only Basemembers for certain accounts for extracting data ?
    I need to extract data for level0 members of certain accounts which is about 300. If I don't put the filter its more than 2000 records.

    Hi - unfortunately you cannot do that in the current KM. We faced the same issue and logged the issue with Oracle. Its being considered as an enhancement not as a bug. So we have to wait for future releases. As a solution for this we created TaskLists in HFM and extracted data.
    -app

  • Unable to capitalize the AUC from project to Fixed Asset

    Dear Experts,
    I created AUC automatically from WBS and i have settled that WBS with CJ88. But when i try to capitalize it to Fixed asset via AIBU, i am unable to do it. The system throws the error message as
    Line item settlement is not possible for asset MY02 36 0
    Message no. AW050
    Diagnosis
    You want to carry out line item settlement of an asset under construction. This transaction can only be carried out for assets with active line item management.
    However, line item settlement is not active in the asset class of asset 36 0 (company code MY02).
    If the asset is an asset under construction belonging to an investment measure, then you should carry out the settlement using order or project settlement.
    Procedure
    Check the setting for 'status of AuC' in the definition of the asset class.
      Currently asset class settings was investment measure in "status of AUC". I choose this because i want to create a AUC automatically from WBS. If i choose line item settlement in asset class, then i can't assign that asset class to investment profile which inturn i am unable to create AUC automatically from WBS.
    Please help me sort out this issue asap.
    Regards
    Vetri

    Dear Vetri,
    The reason for this error is most of the time that the field ANLA-XOPVW for this asset is not flagged. Please check this in table ANLA.
    OR
    In T.code OAOA check your AuC Asset Class whether your asset class is selected Line Item Settlement. If you have selected Line Item settlement after creating an asset and posting has been alsready done for the asset it won't help you.
    The Line Item Settlement indicator should be active when the Asset Master is created and the postings are made to it. If this is the case, reverse the postings made to this asset - Create a New AUC - Make the postings Again - Then try AIAB.
    I hope this will clear your conecpt and will help you to solve your issue.
    If you have any doubts feel free to share.
    Regards,
    Pankaj A Bhalerao.

  • PS: WBS is not flowing for a Material, while creating delivery from Project

    Hi,
    While creating delivery from Project thro CNS0, WBS is not flowing for a Material in delivery, in turn WBS is not flowing in Billing document for same material, in turn not allowing to Post the Billing document to Accounting.
    Error while releasing Billing to the Accounting: Accounting Entry is not generated. Error Message:Assign Condition type
    YMRG in COPA.
    Pls let me know, what can be the reason ?
    Thanks.
    Amit.

    Hi Kuldeep,
    Check this note,
    Note 159387 - Message BP603: incorrect line item is displayed
    Its valid only till 4.6. Might give you some idea but.
    Regards,
    Gokul

  • Delivery from Project with reference to sales order

    Dear All,
    I am facing problem in delivery. In my case scenario is-
    1. There are 10 materials with 20 quantities.
    2. I create a sales order only for two material with 5 quantities and enter wbs element number.
    Now when i use CNS0, enter sales order number and wbs elelment number system shows all 10 materials that I dont want means I want the materials that are included in sales order. Please help me how to control this.

    Please read SAP Help for a better under standing...
    I mentioned below a line from SAP help for your info.
    ...... it selects material components, the system takes components into account that have been assigned to either a network or ...... ...
    Please follow the below path to access the help..
    SAP Help Portal >>> Logistics >>>> Project System >>> Material >>>> Delivery from Projects......

  • Summarised postings from AP payment Program

    Has anybody come across a requirement to summarise the payment postings from F110 to the GL?
    When I run the payment program, the outgoing payment GL account is updated with each of the vendor payment amounts. The client wants to see just one posting to the GL.
    eg, three vendors are paid by BACS, each of £1000
    the posting to the GL will be to Dr Vendor Cr Outgoing clearing for each of the £1000 payments
    I want to summarise the postings so that each of the vendors are posted, but one amount of £3000 is posted to outgoing clearing.
    i am aware of the process issues with regard to returned bacs, I just need to know can this be done?
    Can anybody help?

    You need to define new payment program in AP.
    Navigation Setup->Payment->Programs
    HTH
    DineshS

  • How to clear Statistical Postings from Cost Center

    Hi All,
    Is there a way to clear the statistical postings from the cost center it has been incorrectly posted to and be moved to the correct cost center?
    I think there is a way to do it by making debit and credit entries to the G/L account where the postings initiated, but I am not sure about the whole process.
    Any help is appreciated.

    Hi Pradeep,
    I think u can use T.code KB15N for the issue ur facing.
    Regards,
    Shivguru Prasad

  • Direct Postings from FI to COPA

    Hi!
    I have  done configuration for PA transfer strucutre for Direct Acct Assign. fr. FI/MM.
    but while I am creating the FI document , unless until I click on profitability segment field, system is not posting COPA document.
    Is it mandatory to click on Profitability segment field every time we are posting FI document in order to post COPA document?
    Of course I am getting the information for "enter a true account assignment object with revenues", as we have used costing based COPA and profit centre posting is statistical. we are not worried about this warning, as we can neglect the same.
    regs,
    ramesh
    Moderator: Dear Ramesh, please read thread Rules of Engagement (first thread in this forum) and avoid to create duplicate threads about the same matter.
    See updates in Thread Direct Postings from FI to COPA . Current thread was locked.

    Hi Ramesh,
    It is mandatory to click on profitability segment when you are posting form FI.
    To simplify the selection of similar, frequently entered combinations of characteristics, you can create entry aids. For more information refer the below link:
    http://help.sap.com/saphelp_47x200/helpdata/en/11/a78918e76911d2a61f0060087a7a87/content.htm
    BR,
    ADI

  • Delivery from Project across company codes?

    What is needed to Deliver from Project Stock in company A to company B?
    Company "A" - required is Goods Iusse out of Project Stock...
    Company "B" - Goods Recept was to be into Un-Restricted Stock, but if required will use Project Stock.  
    STO functionality does not allow a Goods Issue out of Project Stock...
    Without a manual transfer out of Project Sock and into Un-Resticted Stock to allow the STO to work how can this be done?

    Hi,
      Check whether the account assignment object (cost centre, wbs, etc) used belongs to the same company code in the purchase document
    Regards

  • Problem with the% deviation from Project Server 2010 field

    hello
    I have a problem with the% deviation from Project Server 2010 field.
    Within a file or project, this project contains tasks.
    Each task has completed the field% deviation.
    Within the row "Summary" in the field of% deviation does not perform the sum of all fields of tasks.
    Only occurs on certain projects, these projects have the view of PR Progress Report
    Anyone know happens?
    thank you very much

    Hi
    Sorry, I'll be more specific now.
    Within the field% deviation. Your settings in PWA is:
    The formula for field% Deviation:
    Str (IIf ([Job baseline] = 0; IIf ([Working] = 0, 0, 100); IIf ([Working] = 0; -100; Int (100 * ([Job] - [Work Online base]) / [Working baseline])))) + "%"
    Under the heading rows Calculation Summary:
    > Use formula.
    Within the field Allocation Calculation of rows:
    > It is labeled the "Apply unless you manually specify".
    The field [Job] and field [Job baseline] are fields Pack project server.
    The error is in project, in the list of tasks.
    In the top row, this row summary makes the sum of the ranks of the tasks of the file.
    But in my case only in the summary field the same value appears in the tasks.
    In all the cells in column% deviation appears the same value.
    I hope it helps.
    thank you very much

Maybe you are looking for

  • Mail attachment image caching problem

    Using C7-00 and Mail for Exchange with up to date software. I received two Mobile Boarding Pass emails from Lufthansa for my flights. These emails contain barcode.gif as an attachment that one can show at the gate when boarding. Now the two emails co

  • HTTP POST with advance balance cookies

    Hello I am trying to keep a session sticky for 20 mins based on cookies. The problem is the application is using HTTP POSTs and the balance method only looks into the HTTP GET. How can I get the CSS to look into the HTTP POST? Any examples would be g

  • Command line interface to "code cache" memory pool utilization

    I need to monitor the usage of the "code cache" memory pool through a command-line interface, but it doesn't seem to me that the jstat tool is able to give me any information about this particular memory pool. Are there any other tools that is able t

  • FYI Is the grass always greener?

    I hope this doesn't anger anybody, but I'm going to depart from our form theme. I read a thoughtful review of Lightroom on a Canon forum site and thought Aperture users might like as read. As a registered user of Raw Shooter Premium, I was upset when

  • Java download won't open in mavericks

    Hello, I am using a Macbook Pro and was recently upgraded to Mavericks and now do not have Java to run a couple of programs I use and when I try to download the most recent update, it won't open and I get this error message: Process:         Installe