Excluding certain storage location stocks from planning

Hi experts,
We have a requirement as under:
A plant contains certain stocks of a product. Part of this stock is kept in a separate storage location. This stock is reserved for local "over the counter" sale at the plant gate. So this stock should not be considered as available in planning as well as in deployment.
Can we exclude this stock at particular storage location during transfer to APO?
Thanks in advance.
Nitin

Hi Nitin,
I don't think we can exclude any stock at particular storage location during transfer to APO.
In APO, we always have stock at plant level which is the lowest possible level.
And even logically thinking it should not be possible. Least I can say is, this is not the standard APO functionality.
But, we can always explore customer exist.
Instead of doing that, what I would suggest is to make this stock a "Special stock" in ECC.
So, it will not be used for the purpose for which it is not meant for.
Hope this helps. Let us know if it refrain you from making it as a special stock.
Regards,
Abhay Kapase

Similar Messages

Storage location exclusion from planning run

Hi All
I have excluded material from planning run by putting storage location exclusion indicator in MMSC for material.
Iam using kanban replenishment.
In material master, production storage location is same as that of put in MMSC.
I have created Planned independent requirement in MD61, when i do MRP system created planned order.
Please inform if storage location is excluded from MRP in MMSC then why system is considering requirement for that material at that storage location.

Hi Krishna
Please read help for Storage location MRP indicator
Storage location MRP indicator
Indicator that you use to exclude storage locations from material requirements planning at plant level.
If you do not set this indicator, stock, requirements, and receipts are included in MRP at plant level.
Use
You can exclude storage locations from MRP at plant level in one of two ways:
By excluding storage location stock from MRP
If storage location stock is excluded from MRP at plant level, no receipts for this storage location will be created in the planning run.
By planning storage location stock separately
If storage location stock is planned separately, the storage location is replenished with goods if the stock falls below the reorder point.

I want to exclude a storage location from MRP

I want to exclude repair storage location from MRP so that the stock with repairs storage location should not be considered for other demands.
Also repair storage location stock should not be calculated against 'stocks' term in MD04.
How to do this ? Pls share.

Hi,
In transaction OMIR, choose your plant & then for the storage location you want to exclude from MRP enter 1 (exclude from MRP).
After this setting is maintained, whenever a material is created in this plant & storage location, it will have MRP indicator as "1" in the mrp 4 view .
For materials already in this storage location if the MRP indicator "1" is not maintained in mrp 4 view, please go for a mass change maintenance in the material master & maintain this indicator.
Stock in the excluded storage location will not add up to the stock which is displayed in the top in the md04 screen. This stock will be displayed separately in the bottom of the screen.
Please let me know if you have any questions.
Regards,
Senthilkumar

Restrict certain Storage location from getting displayed in CO06 !!

Dear all -
We have implemented ECC 6 recently & I have a doubt about restricting certain Storage Locations
in CO06.
I have 2 storage locations for a plant and would like to restrict it in CO06 one of the storage locations.
Is there any other way by which I can RESTRICT certain storage locations from getting displayed.
I am putting in Logistics Execution threat, with an anticipation thall ALL logistics module experts will be able to see this and respond.
Thanks
Arun
Edited by: ARUN TULSI on Jun 25, 2008 10:14 AM

Dear,
System determine issue storage location from the material master, the value of the storage location of the BOM item, or the storage location from the supply area.
Check in BOM component details storage location you have defined.
Check production storage location from the plant segment of the component is taken into account for the use of MRP areas also. When planned order is being created for the superior assembly in a MRP area?
Also check the Material requirements planning (PP-MRP)
--> planning process
--> BOM explosion and dependent requirements determination
--> storage location determination for BOM explosion
Regards,
R.Brahmankar

Replenishment between Storage Location with MRP Planning

Dear PP Gurus,
I need you expertise on the below question.
I have a plant with multiple Storage Locations. One Storage Location is Main Warehouse and another ilocation s External Warehouse (3PL) where excess stock are kept due to storage capacity in the Main Warehouse.
Now the requirement is replenish the stock to Main Warehouse from the External Warehouse with Stock Transfer using MRP trigger the Stock Transfer.
I know the setting in MRP 4 View in the material master, the Indicator to set to 2, maintain a reoder point in the Sloc: 1200 and Replenishment Qty: 1500 and Special Procurement Type: (what should be the setting)
My question is where to set the target Sloc and source Sloc, then only system will trigger the replenishment Stock Transfer?
The storage location which is plan separately, will have a different segment. Therefore, in terms of the availability check for the Sales Order it will consider as normal based on the scope of check.
Appreciate the reply
Thanks & Regards
Pooja

Dear ,
1.You need to set up the MRP for Plant with group of storage location and run MRP-MD01 .You can try SCOPE of planning -OM0E.
As an information : In standard MRP I, f you have several storage location for your plant, you cannot plan for them separately unless you assign them to a separate MRP area.If a storage location (alone) is assigned to an MRP area, it means you wan to plan for it separately. If several storage locations are assigned to an MRP area (or let's say to a plant), it means you want to plan using all of them - and you cannot choose only one and plan for it (you can exclude a SLoc from planning w/o assigning it to MRP area).
2.Find steps for config for activating Sloc to Sloc transfer within plant using STO : -
follow path: SPRO--> Materials Management -->Purchasing -->Purchase Order -->Set up Stock Transport Order -->Set Up Stock Transfer Between Storage Locations
1. Activate Stock Transfer Between Storage Locations
2. Assign Delivery Type and Checking Rule According to Storage Location
purchase document category 'F' , here use PO type UB, supplying plant, issue sloc and delivery type , (prefer to create new delivery type by copying delivery type 'NL' replenish delivery
3. Define Shipping Data for Stock Transfers Between Storage Locations
for plant defind sales org and distribution chenal and devision
select the pline and go to sloc
assign there customer (created for sloc)
4. Define Rule for Determination of Shipping Point
for newly created delivery type set L storage location specific shiping poing determination
5. Assign Shipping Points According to Storage Location, assign her sloc based shiping poing determination
at last when you will create PO put issue storage location, system will determine shiping data based on config done.
after this process will be same as STO plant to plant using shiping.
You will need to mention the issuing storage location during posting the delivery,
ie, ME21N - Create STO
VL10B - Create Delivery
VL02N - Post Goods issue - here you will need to mention the issuing storage location
Refer : STO process -Std in SAP
Hope it is clear to you .
Regards
JH
Edited by: Jiaul Haque on Jul 7, 2010 10:23 AM

Storage Location exclusion from MRP problem

Hi all,
I have added some Storage locations to exclude from MRP, via SPRO cust.
(Production>MRP>Planning>Define st. loc. MRP per Plant)
However, when I want to verify it, I go into MD04 and for a material, the excluded storage loc. lis does not show up in the end.
What additional cust. do I have to do?
Thanks,
Screens:
https://picasaweb.google.com/koray.tulumen/Paylasacaklarim

Hello,
To exclude the storage location from MRP Run
Check the following settings:
1.In OMIR you can exclude particular storage location. input values as 1
2.MRP - 4 view For storage location option input value as 1
3.in MMSC - same input value as 1
Hope the iformation is useful
Regards

Storage location stock with value on a particular date

i m in search of a report or logic which can fetch stock as in mb5b on a particular date. mb5b shows sloc stock but without value and show valuated stock without sloc. can anyone help me out to find such report or give some logic or table from where it can fetch sloc stock with value.
Edited by: Husain Husain on Jan 28, 2010 4:00 PM

Hi,
All the stock related reports like MC.1,MC.5,MCBA etc will give you stock for a particular months range. he only report giving stock on a date is MB5B .However in this report you will not get the storage location stock value.
Now try the report in T Code J3RFLVMOBVED which will serve your purpose .Here in the material parameter tab give your storage location and the date range in the main tab Posting date range and than execute.
Dhruba

ATP check in certain storage location based on item category

hi gurus,
i need to know whether any one can help me. i need to know how to set the availability check in certain storage location by each item category. such as :
mat A item category TAN, ATP check only include in SLOC 01,02,03
but mat A with item category TANN, ATP check only include SLoc 04.
case:
in MMBE:
mat A
plant 1000 pc
     sloc 01 - 400 pc
     sloc 02 - 200 pc
     sloc 03 - 300 pc
     sloc 04 - 100 pc
so when create SO:
1. mat A itCat TAN qty 1000pc
   (Sistem will say that the stock not enough, bcoz stock in Sloc 01,02,03 only 900pc)
2. mat A itCat TANN qty 200pc
(Sistem will say that the stock not enough, bcoz stock in Sloc 04 only 100pc)
actually i prefer to use the standard solution but i think that must be use user exit, if so, do u know which user exit i shuld used, if not maybe u have a standard solution,.
thank you so much..
regards,
cindy
Edited by: cindy himawan on Feb 22, 2008 6:17 AM

Hi
As per my knowledge there is standard solution available for your requirement.. you may need to do some customisation using Z tables..
Muthupandiyan

Storage location exclusion from MRP run

Dear Experts,
please how do i exclude a particular storage location from being considered in MRP Run? and from which table(s) can I get the list of open production orders

Dear Vincent,
in OMIR you can exclude particular storage location. input values as 1
MRP - 4 view For storage location option input value as 1
in MMSC - same input value as 1
For your scond query what exactly you mean be open Prd orders
You can get all details in COOIS by inputting system status
Regards
Madhu

Storage location stocks

hi
Can anyone please help me with this? I am new to MM.
I created a raw material. Unrestricted-use of stock shows :0.
Storage location stock for current period shows all 0s. Where can i enter the stock values for this material.
Thanks
Madhu

Hello Madhu,
Stock value is calculated based on the material price and total stock quantity. In your case you just created Material Master record, so it will not show up the stock value unless you put some the stock in your valuation area (Plant).
There are two ways to get this stock value.
1. Manually upload the inital stock using MB1C / MIGO using mvt type 561, give the external value in local currency (On Qty tab) else price will be taken from material master record.
2. Receive the material with or without purchase order (mvt type 101/501).
1. Create purchase order (ME21N)
2. Crete Goods Receipt (MIGO)
After any of the above option, the stock value will showup in the material master record.
Hope this will help.
Regards
Arif Mansuri
Reward if answer is helpful.

Sales order stock and storage location stock on past date with value

Hi everyone.
I m looking for a report which can give sales order stock with value as it is shown in mb5b and storage location stock with value as in mc.5 is there any report which can give the combination of both the things on past date with values.

can you tell me what shall be the fields and table for special stock on past date with value and sloc stock on past date with value

To exclude SCARP storage location from MRP

Hi Gurus,
We have a issue regarding the scrap Quantities. we need to exclude these materials from the available stock for MRP. We have a setting in the MRP available stock with Blocked stock not checked and restricted stock checked.
My question is if we un check the restricted stock, is the MRP will not consider the stock in scrap storage location.
Please help to find the solution.
Thank you.
naveen.

Hi,
Your scrap str location is not either blocked or restricted str location. This is a regular str location but the name is scrap location.
System will consider this str location as a regular str location. So do setting to exclude this str location from MRP as previous member explained.
Regards,
Dharma

MRP to ecxlude storage location stock and read only requirement

Hi All,
Below is the requirement for raw material,
Have two storage locations A and B.
For storage location A, MRP should exclude stock but has to consider demand's at A (dependent requirements, order reservations) and create MRP elements (purchase requisitions, scheduling agreements etc.).
SLOC B has to consider as normal for MRP (should read demand and stock as well).
Please suggest if it is doable, if yes; how to set the storage location A, so that it just read the demands but exclude stock.
Setting up only "SLOC Indicator" 1 in MRP 4 view is not the option I believe.
Thank you.

Can someone please suggest on below requirement,
How to make the settings at material level so that for a storage location 'A', MRP will just read/consider the demand but exclude the stock.
Is it feasible?
Regards,
Deepak Girme

Back Date Storage location Stock / Subcontractor Stock

Dear SAP Guru (s)
Please confirm can we get back date stock at storage location with value and quantity. Also tell me how can we take one subcontractor stock at any particular date.
We are using MB5B, but it is giving only quantity at storage location level and value at plant level.
Full points if problem solved.
Regards
Ishu

Execute MB5B with special stock and O for special stock indicator, and then double click the material number, you can get all the material document NO.

Difference in VAluated and Storage location Stock

Hi SAP Gurus,
I'm facing following problem during viewing Stock on Posting Date (MB5B)
For a perticular material, perticular plant, particular period
When I view storage location /Batch Stock (storage location not specified): Lesser Stock is shown
When I view Valuated Stock stock shown is more.
What may be the problem
Regards

Dear Ranjan,
I am using T.code MC.9 and MC.1
when i am executing the MC.9 for all materials
some of the materials with ZERO stock i mean valuated stock is ZERO but its showing value of the Valuated stock. same case with MC.1 also which is storage location wise
for a ZERO qty in storage location its showing valuated stock,
i have raised an issue to SAP they are working on it , we have open our PRD system to check SAP people.
Regards
venu gopal

Excluding certain storage location stocks from planning

Similar Messages

Maybe you are looking for