Excluding HR/PY for TDMS copy

Before we implemented DMIS_HR it was possible to simply select or deselect HR data for the TDMS copy. Now it seems that this option is no longer available. I would therefore have to create scrambling rules and there are no predefined ones for Australia/NewZealand. It looks like a cumbersome task to me. Is there a way to still do a TDMS extract WITHOUT ANY HR data once the DMIS_HR package is installed?
And if we refresh an existing target client, will this REMOVE all HR data in there?
I basically have a target system that has everything we need but also has all the HR data. The requirement would be to remove the HR data and leave everything else in place. I would think this isn't possible without starting another extract but I figured I better ask first. Maybe somebody has done something similar in the past?
Thanks

Removing existing HR data from the current target client is not possible using TDMS.
You will need to do a new execution of TDMS ERP package and it is still possible to exclude transfer of HR data from the TDMS data transfer. Applying DMIS_HR should not have any effect on the function to exclude transfer of HR data from TDMS transfer.
Best regards,

Similar Messages

TDMS copy based on Company Code and time based reduction.

I'm struggling to understand the process of this scenario.
I created a new client in the target system (using local client copy with SAP_UCSV).
I configured a time based and company code based reduction.
After the TDMS copy is complete, I check the target system and still find plenty of data that isn't related to the company codes I selected. It appears that it still copies part of the excluded data. For example: I can still find work orders and sales orders for company codes that I specifically didn't select for the copy process.
Any idea why this is? It appears that the copy doesn't bring across ALL of the excluded data. Just some.
I double checked and triple checked my TDMS selection for company code based reduction and I can't find any error in there.
To be more specific: I selected company code A01 A02 A03 and left B01 B02 B03 out. After the copy there are still orders visible in the target system with company code B01 B02 B03.
This is after I created an empty target client first so it's not copying into an already existing client.
Thanks for any guidance guys.

Hm, not sure what's going on. There is no clear link between those existing orders and the company codes I initially selected. Then again it only seems to have a "high level" record of the data. As soon as one starts to drill down, the data is missing as expected. Same goes for other areas as well.
Looks like we can live with that for now so I won't lose any sleep over it anymore.

Copy QAS customizing after TDMS copy from Production are finished

Hi Gurus,
I need your help whit this issue. I use TDMS to create a second client in QAS with Production data but I have to manteinance a QAS customizing.
The TDMS copy was finished OK. So, the customizing is same as the production system; but I need the customizing from QAS system.
Have I import ALL transport to QAS in the new client ?? Or I can do a client copy??
How to copy the customizing QAS to the new client in the same system??
If I do a client copy with SAP_CUST profile, the documentation said that the appliction data was deleted.
SAP_CUST
Client-dependent Customizing, including authorization profiles, are copied. The application data is deleted and the user data is retained.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c2/17e73a86e99c77e10000000a114084/frameset.htm
I don´t know how is the best practice for this situation...
Somebody can help me for this?
Thanks a lot.
Sergio.

Hello.
What we do here (sucessfully) is to install in QAS all transports in the queue to the production system. Of course for that you have to be sure that your queue really represents the delta between QAS and PRD.
Actually that's already how we did it before TDMS: we made full system copies, but then imported the queue back in QAS so that we would keep the customizing (and ABAP).
Regards,
Rui Dantas

Taking free space out after TDMS copy

Hello Experts,
I have performed a TDMS copy from Production to one of our quality systems. Since I have taken only 6 months data the size of our quality system Database is reduced which was previously equal to Production.
1)At present around 1 TB of space is free in PSAPSR3 tablespace whichI want to bring to OS level filesystem. I do not wantto go for whole tablespace reorg due to some specific reasons like large no of tables with Long fields, space issues etc.
If anyone of you have faced a similarsituation pleasedo guide.
Regards,
Umesh

Hello Rajesh,
I already found tables for reorg and tried reorg for some of those tables , but the space released after table reorg is at tablespace level and not at OS file system. So again the issue remains the same to pull out space from tablespace without reorg.
I have searched various forums but everthing at the end comes to tablespace reorg . Since I have space contraints , I am searching for workaround for this.
Regards,
Umesh.

Set up snapshot for TDMS

To save resource, we would like to have snashot set up for the source systems in TDMS.
I could not find any document for this specific for TDMS.
Could anybody provide some links?
Thanks!

Hello,
Logical details for the snapshot is given in the operations guide under - 2.6 Shadowing in the Context of SAP TDMS.
Also under 4.3 Choosing and Preparing the Sender System - its mention :
you may want to use a snapshot or mirror or an existing 1:1 copy of the production system (for example a QA system). The options you have here depend on the hardware you use and can consequently not be covered here. To learn more, contact your hardware provider.
So, just check the operations guide once and then coordinate with the hardware vendor.
Best Regards
Niraj

Print Multiple copies of report, and resetting Page number for each copy.

Dear frnds!
i am using developer 6i reports i have a problem.
i want to Print Multiple copies of report, and resetting Page number for each copy" that is 4 copies of an invoice is required
1 - for user copy
2- gate copy
3- accounts office
4- office copy
any body please tell me the solution "i am using oracle 9i and developer 6i"
Thanx
Ibrar

Hi,
I was wondering if you were able to get your multiple copies working? Below is what I have so far, just trying to get it to work before changing the actual template.
<?for-each-group@section:R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?variable@incontext:G1;R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,3,1)?>
HEADER
PSN: <?$G1/Pick_Slip_Number_Display_ID54?>
PSN Detail: <?$G1/PickSlipNumber_ID260?>
Page 1 of 3
<?start:body?>
BODY
<?$G1/LineNumber_ID6?>
<?end body?>
FOOTER
<?end for-each?>
<?end for-each-group?>
XML:
<R5542520>
<Pick_Slips_Detail_Lines_S24>
<Header_Custom_Section_S24>
<Pick_Slip_Number_Display_ID54>123456</Pick_Slip_Number_Display_ID54>
<PickSlipNumber_ID260>123456</PickSlipNumber_ID260>

HT3702 why did i get charged three times for the same purchase? is it because i use my apple id on three devices.. two iphones, and ipad... and and macbook geez apple i support you enough can i just pay for one copy of the audiobook

why did i get charged three times for the same purchase? is it because i use my apple id on three devices.. two iphones, and ipad... and and macbook geez apple i support you enough can i just pay for one copy of the audiobook

These are user-to-user forums, you are not talking to Apple here.
If it was an audiobook then they are one-time only downloads, to get it on your other devices you need to sync it to them and not re-download it oneach. You can try contacting iTunes support and see if they will refund or credit you for the second and third downloads : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Looking for a copy of iPhoto 2.0.1 UPDATE...

Looking for a copy of iPhoto 2.0.1 UPDATE... can't find it anywhere?

fireguy
The update for 2.0.1 is only available through Software Update. Look for Software Update in System Preferences.
The update will be offered if Software Update thinks you only have iPhoto 2 installed.
If you have updated to 2.0.1 before go to:
MacintoshHD> Library>Receipts and look for:
iPhotoUpdate201.pkg
Delete this receipt. And try Software update again.

How to exclude sales office for combination sales order type/division?

Hi experts,
I would appreciate if you could advise: How to exclude sales office for combination sales order type/division in ECC 6.0 ?

Hi
Standard SAP functionality would not be able to cater to this. Ideally create a Z table with sales order type and sales office combination. Put in entries for combinations that are allowed. In Sales order program MV45AFZZ use the exit USEREXIT_MOVE_FIELD_TO_VBAK. In this exit write down the logic passing the sales office determined and the order type and check if the entry is there or not. If the entry is there then it should go on to the next step. If it does not then pass an error message. You need to use the help of your ABAP er for this.
Thanks
Indranil

Transport for System Copy from RSA1 in BW 3.5

Hi Guys,
I am not able to create transport for Source system objects for system copy in RSA1.
I have copied the production system(BWP) to sandbox(BWQ) and want to connect to same source system.
According to note 886102 when creating transport for Source system objects I am getting following error.
You cannot use request BWQK900020
Object ISIP ZPAK_5FKMUFOSQPPRNYYDZV1U6A7W0 could not be saved to order
BWQK900020
This is stand alone system but for transports I have created virtual system. Before creating virtual system I am able to create transports. But now after creating virtual systems I am not able to get pass above errors.
Any help would be appreciated also with points.
regards,
Santosh

Hi,
Check the notes 140276 and 325470 to chart out a plan of action.
BR/
Mathew.

Undo/Redo for Cut, Copy, Paste

I am trying to implement Undo/Redo for Cut,Copy,Paste in a Treetable.
I have to support undo/redo for multiple nodes being cut/copied. I am not sure how I should be going about implementing this. Any help will be greatly appreciated.
Thanks

If the class you are using doesn't support cut, copy, and paste already, usually what you do is store a list of actions in two lists. One for actions done, the other for redos (when there is an undo). Capture the data before and after each operation (you can create a KeyListener to listen for the events) and store that in a list. When undo is called, the last element on the list should be undone, either by taking it out of the list and reiterating through the elements still there, or implementing an undo method in the object you are trying to change. Then put that element on the redo list in case that is called. This works well with graphics and stuff, but I never tried to implement it in a tree with nodes and stuff, so that's about the most I can help with right now. I hope it helps some!
-JBoeing

How does the copy button work in safari for ipad (copy button under facebbok share button)?

How does the copy button work in safari for ipad (copy button under facebbok share button)?

On a website ...
Tap the Action icon bottom of that window. (white square with a right facing arrow) then tap Facebook.
You should see the following depending on the what content the website can share.
Copy / Mail / Message / Twitter / Print / Bookmark

Got code from movie for digital copy

got code from movie for digital copy, the lorax. Went to itunes, signed in, typed in code, hit redeem. Pop-up appears saying to sign in. I fill it out, hit redeem, and it pops up again. After 10 attempts, the redeem page changes to 'your page has timed ou't.The whole time I am already signed in! never had this issue before. Tried to do it on ipod, same exact issue.

Same exact issue!! Ive seen some others with similar issues with LORAX and itunes

Generate a seperate PDF for each copy of the recipients

Hi
We have a requirement to generate PDF for each copy of the recipients. Assume , if we have a transaction that has one insured , one broker and three mortgagee copies, we would need to generate 5 PDF's (one for insured , one for broker and three for mortgagee.
The form has an address section which displays the mortgagee address details. Each of my mortgagee copies needs seperate PDF to be generated.
Is there any Documaker Server or DAL Rule that we could use this to achieve the functionality. We are using Documaker 11.3 with Docupresentment 2.2 on AIX Platform
Thanks in advance

data :tab_otf_data TYPE ssfcrescl,
cparam TYPE ssfctrlop.
CALL FUNCTION GV_FMNAME
EXPORTING
IMPORTING
   EX_USER                    =
DOCUMENT_OUTPUT_INFO       =
   JOB_OUTPUT_INFO            = tab_otf_data
JOB_OUTPUT_OPTIONS         =
TABLES
    I_DESC                     =
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
check out for the field TDFORMS of tab_otf_format

Hi i need the email of the apple store chicago michigan avenue. is to ask for a copy of the sales receipt from an iPad and I do not find your mail from anywhere thank you very much

hi i need the email of the apple store chicago michigan avenue.
is to ask for a copy of the sales receipt from an iPad and I do not find your mail from anywhere
thank you very much
my mail is [email protected]

The one on North Michigan Av. ? You'll have to call, I couldn't find an email address.
Apple Store
North Michigan Avenue
679 North Michigan Avenue
Chicago, IL 60611
(312) 529-9500

Excluding HR/PY for TDMS copy

Similar Messages

Maybe you are looking for