Excluding Report Group Header!

How would I be able to exclude printing the header of a group when it is at the end of the page?
Knowing that it will be printed again on the next page.
Thanks in advance!

That works for the headers which get printed at the end of a page.
But when the number of records needed to be printed for the same group does not fit on the same page, the group and its details move to the next page leaving the previous page half empty or more. Any way to bypass this problem?
Thanks!

Similar Messages

Supress Group Header in Report when Subreport is blank

well the title says it all.
I want to supress the main report group header when the subreport (is in details) is blank.
I'm stuck on this:
I'v created a shared variable in both report and subreport and it gives me the number I want but not where I wanted to appear. If I put the variable on the group footer it shows me the correct value but if I put it in the group header it shows me the previous group footer result.
This is what I got:
Group Header
Client 1
Shared Variable=0
Details
Contract 01
Contract 02
Group Footer
Shared Variable=2
Group Header
Client 2
Shared Variable=2
Details
Group Footer
Shared Variable=0
This is what I want:
Group Header
Client 1
Shared Variable=2
Details
Contract 01
Contract 02
Group Footer
Shared Variable=2
Group Header
Client 2
Shared Variable=0
Details
Group Footer
Shared Variable=0
Can I do that?
Edited by: Pedro Pinto on Jul 29, 2008 2:47 PM

I'm going to try my best. This is what I get:
Main Report
Group Header
Client 01 -- 0->shared variable
Details
Subreport 1
Group Footer
2->Shared Variable
In subreport for client 01:
Detailsa
Contract 01
Contract 02
Detailsb
Total of contracts = 2->Shared Variable
Main Report
Group Header (supress this section)
Client 02 -- 2->shared variable
Details
Subreport 1
Group Footer
0->Shared Variable
In subreport for client 02:
Detailsa
Detailsb
Total of contracts = 0->Shared Variable
For Client 03 it doesn't show anything but if Client 04 if it has contracts it only shows the contracts but not the name of the client.
I've already did supress when is blank but in the details.

How to change Group Header Font in Crystal report Left Most Group Tree?

Hi Dears!
I am using crystal report 10 with C# 2005. I have an issue that i want to change the font of Group Header Text that is visible when we click on Toggle Group Tree button and a tree pane is visible towards the left side of report viewer.Means all the Group Tree Items that are visible when we click Toggle Group Tree button on Crystal report Viewer.
I have goggled a lot but unable to find any hint. Any idea or help would be highly appreciated .
Thanks in advance.

look for information on drilldowngrouplevel function. this is available in versions 9 and higher.
i cant test it in mine to give you the syntax, but you would need to create another section and conditionally surpress the section on the drilldowngrouplevel function. hope this helps

SQL code to display Group Header in Reports

Please provide the sample sql module to use group headers in reports.
Even after reading the Extensibility guide, I am not able to write code with proper syntax.
I think all the below 3 parameters has to be used to show group header in Reports.
"oracle.sysman.eml.ip.render.elem.TableRender.columnGroupHeader"n
"oracle.sysman.eml.ip.render.elem.TableRender.columnGroupStart Col"n
"oracle.sysman.eml.ip.render.elem.TableRender.columnGroupEndCol"n.
I am not sure whether in a single call to mgmt_ip_param_value_record function in Reports, all 3 parameters has to be called.
Please help.

You will have to create a new mgmt_ip_param_value_record for each one of those.
I assume it will look something like this:
l_param_values(1) := MGMT_IP_PARAM_VALUE_RECORD(
'oracle.sysman.eml.ip.render.elem.TableRender.columnGroupHeader1',
'My New Group');
l_param_values(2) := MGMT_IP_PARAM_VALUE_RECORD(
'oracle.sysman.eml.ip.render.elem.TableRender.columnGroupStartCol1',
'start column');
l_param_values(3) := MGMT_IP_PARAM_VALUE_RECORD(
'oracle.sysman.eml.ip.render.elem.TableRender.columnGroupEndCol1',
'end column');
Where "start column" and "end column" would be names of columns already in your table.

How to display the last value of a field in a group in the group header

I need to display the last quiz score from a group of quiz scores as part of the header of a group of units (the quiz score values are in the detail record). I can not use the group footer, which would be the natural place to find the last value. It must be in the group header because there will be a subsequent group within the unit group. In other words, the grouping is as follows:
Unit Group Header (Display last quiz score in unit)
SubUnit Group Header (Display other detail summaries)
Detail Record (including quiz score)
SubUnit Group Footer
Unit Group Footer
While there is a minimum/maximum summary function, there is not a first/last function.
Fuskie
Who is constantly amazed at the ability of users to request report features that are not easily implented through Crystal Reports...

Hi Fuskie,
One suggestion to display the last quiz score in the Group Header, other than what had already been suggested, will be to use a linked subreport in the Group Header. It is not an efficient way to display the information, but it could do the trick.
Another suggestion will be to insert a subreport in the report header, then store the last quiz score in an array for each group, then share it with the main report and display the values in the appropriate group. In this way it will only connect twice to the data source, one for the main report and once for the subreport, instead of multiple connection for each group.
Finally, the most efficient way will be to have this value calculated on the database side using a command object or a stored procedure.
Patrick

Blank Page with repeated group header getting displayed

Hello All,
One more help i need,
Am having a formula field in the group header for the same reprot which i have posted earlier and am displaying some text based on the condition and the option repeat group header is checked for each page.
the issue here i am having is while exporting the report to .txt (flat file)
the formula field is displaying same static data (i.e. the formula field is not evaluating while exporting to .txt)
could you please help in resolving this.
Thanks
Ranjeet

Hi Ranjeet,
Can you attach that report with sample data to this thread?
--Naga

How to print Group Header on page break in a subreport - CR XI

Post Author: rickcf
CA Forum: General
I have a subreport that has 3 groups with only one group that has a heading. When the report prints and a subreport group is split between two pages (on a page break) I would like the group heading to also print again at the top of the page- even with the word "continued..." also. Right now only the main report page header prints. How can I do this since there is no page header in a subreport?
Thanks
Rick

Post Author: rickcf
CA Forum: General
Is there any way to test during detail processing time to see if a page break is occuring? If so I could print out a fake header on the detail line, suppressing it only if the page breaks. That is the only thing I can come up with to solve the issue.
I am surprised the is not an option to reprint the group header on a page break. That seems like a needed option and that is the standard in Foxpro reporting - there is a checkbox option to cover this scenario.
A coworker did find a workaround to add a psudo page header to a subreport so if I can add that and put my group info in there it will also work. I have not looked at the code yet though.
I have another issue I am working on so this one might take a while to get back to.
Rick

Data Concatenation - Looking to have result in the Group header

Dear all,
Few months ago, I try to concatenate cells under a Group,
I succeed using the formula gave by Raghavendra
Initialize:
whileprintingrecords;
stringvar i:="";
Place the above formula in group header and suppress group header section.
evaluate:
whileprintingrecords;
stringvar i;
i:=i", "name field;
Place the above formula in detail section and suppress the details section.
display:
whileprintingrecords;
stringvar i;
country field" - "i;
Place the above formula in group footer and right click go to format field and check the option "can grow" in common tab.
My today issues is that I'm still looking for concatenation but I need it in the Header of the Group, not in the footer
As far as I understood
- Crystal Report is reading line by Line, so I can't retrieve the value in the Header before the value are calculate.
- Moreover I've issue on initialize the value
I thougth an GlobalVar Array can work, but I can't find the way to do it
My request is, I've have this DataSet
Paris | Louvre
Paris | Eiffel
Sydney | Opéra
I'm looking Group on City to have in the Header, the value concatened
Paris | Louvre, Eiffel
Sydney | Opéra
Thanks in advance
Edited by: Alexandre VANNIER on Dec 2, 2008 2:09 PM

if i have manual running totals that need to display in the header i do the following
i create the group - ie- jobid
i either insert a sub group below or create a 2nd group with the same field
then i create a 3rd group with the same field
i place my reset in the 1st group
calc in 2nd
display in 3rd

Group heading on each page..

I am trying to get BI Publisher to output a group heading on each page of my report.. At this time, I am using the Word/RTF version to build my layout.
I have information in the word document header and footer, and tried adding the group by column in the header, but that only returned my first group value, always!.
is there a safe solution? I have looked through the forum and seen many questions on this and not any simple answers..
Thank you,
Tony Miller
UTMB/EHN

Just checking to see if you received the e-mail and the file that was attached... I am still looking for solutions to the issue..
Thank you,
Tony Miller
UTMB/EHN

Repeating Group header on each page

Hello Everybody,
I have two groups in my report. For my first group value, i have given report - group expert - options and checked "Repeat group header on each page" assuming that my first group values will appear on each page. But it is not doing so. In one of the page the group footer values are appearing without my first group values.
I belive my problem is my second group values are ending in one page and first group values are extended to next page . Can any one please hep me.

if that is the case Narukonda 1, there are several sap notes dealing with this issue...please see this sap note [here |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313333333133373339%7D.do]which deals with both orphaned group footers and group headers.

How to repeat group head on each page

I have problem with repeat group heaf on each page, I've ticked the option 'Repeat group head on each page' from the Change Group Option. But the group head didn't appear on each page when I previewed the report. Does anyone have a solution/explaination to this?
Cheeers

Sorry Gents, I did't make my porblem clear.
To James Terry
Yes, My reports contain one or more sub-groups (only group 1's group header needs to be repeat on each page).
To Graham Cunningham
I found pages , containing only group 1's group footer summarized info, don't display group 1's group header. Just like what you said ' It will only repeat on pages that display group information'. Is this a bug or sort of default rule? What else can I do if I want the group header to repeat on each page no matter whether there is group info or not, besides moving the info from group header to pager header?
Thanks a lot.
Regards
Joseph

Repeat Group Header On Each Page with Underlay Following Sections

How to overcome the following problem?
1. I am using Crystal report 13.0.5.891
2. I have designed the report with Group Header as [Underlay following section]
3. I have checked the group to repeat on each page
4. Number of lines in the group header may vary
5. Number of lines in details may also vary
My objective is to print the separator line placed in group footer, after the
header lines or after the detail lines which one is taking the maximum lines.
This is not happening, and I am getting the following output, which is not meeting my requirement
Where the "LINE IN GROUP FOOTER" should appear after "Group 1 Header Line 6" in the second page
as the report ends there, but in the output, the line is coming just after the end of detail record.
like following
As a result of this, the next record of the group is overlapping with the first record and creating a mesh
------------------------------------------------------------------------------------------------------------------------------------ PAGE 1 OF 2
Column Heading 1                       Column Heading 2                      Column Heading 3
Group 1 Header Line 1                 Detail Record 1 Line 1
Group 1 Header Line 2                 Detail Record 1 Line 2
Group 1 Header Line 3                 ----------------------------------------------------------------------------------
Group 1 Header Line 4                 Detail Record 2 Line 1
Group 1 Header Line 5                 Detail Record 2 Line 2
Group 1 Header Line 6                 Detail Record 2 Line 3
                                                  Detail Record 2 Line 4
                                                  Detail Record 2 Line 5
======================LINE IN GROUP FOOTER========================
PAGE BREAK
------------------------------------------------------------------------------------------------------------------------------------ PAGE 2 OF 2
Column Heading 1                       Column Heading 2                      Column Heading 3
Group 1 Header Line 1                    Detail Record 3 Line 1
Group 1 Header Line 2                    Detail Record 3 Line 2
Group 1 Header Line 3                    Detail Record 3 Line 3
Group 1 Header Line 4                    Detail Record 3 Line 4
======================LINE IN GROUP FOOTER========================
Group 1 Header Line 5
Group 1 Header Line 6
Thanks in advance.

Thanks for you response.
I have updated the crystal report to 13.0.13.1597.
Still I am getting the same issue. I am generating the report in PortableDocFormat and exporting the byte array to download from the web browser. The application is developed in ASP.NET 2012 .net version 4.5.
I am also uploading 2 images of the final pdf that I am getting, for your opinion.
The report appeared in the first image is ok, where the first group has 2 child records and the second group has 1 child, but whenever I am changing the mapping in the database, where the first group has 1 child and second group has 2 child, my report is not working. as it is clear from the second image
Also after installing the new version of CR, my existing codes are not working, and giving the following exception in the line where ExportToStream is written.
Unable to cast object of type 'FileStreamDeleteOnClose' to type 'System.IO.MemoryStream'.
I have modified the existing code to overcome this exception.

Repeat Group Header On Each Page not working

Hi,
I have a report that have 3 subreport, and in the Subreport, there is Group Headers that enabled the option "Repeat Group Header On Each Page". It works fine in the CR10 preview. However, the header won't repeat in the PDF generated by JRC.
Any Idea?
Thanks a lot!!

Hi,
Doesthe JRC engine uses CR10 jars or XI\R2 jars? Can you possibly try it with latest set of Eclipse jars? You can download it from Diamond.
Thanks
Aasavari

Repeat Group Header on Each Page in Subreport won't reflect when generate by JRC

Hi All,
I have a report that contain several Subreports. Inside the Subreport, there are Group Header section. I have checked the option of "Repeat Group Header on Each Page". It works fine when I preview in Crystal Report. But when I using JRC to generate the report result. The group header only display on the first page of the group details.
More, Crystal 10 Common Monthly Hot Fix (English) already installed.
Any idea?
Thanks a lot for your help!
Donald

Hi,
Doesthe JRC engine uses CR10 jars or XI\R2 jars? Can you possibly try it with latest set of Eclipse jars? You can download it from Diamond.
Thanks
Aasavari

Unable to remove the redundant group header from the bottom of page

Hi,
In one of my projects in I am facing a problem.
I need to display the details of all available products of the company. While displaying the details, I need to group the products based on some criteria (like type of product, release date) and the grouping is upto 4 level grouping. Grouping criteria can se said as, I need to firstly group all the products based on the type, then on the Release Date and then on two of the client specific values on the Product.
Along with this, the view of product details is a thumbnail view (Image on top with all details below that line after line) due to which I need to display multiple (5) products in one row.
The problem which I am facing is:
The most important criterion for the customer is that there should not be any wastage of space.
Secondly, they also donu2019t want to see partial data like only the header data in one page and the Product related Data (Image and Info) on the next page.
In my case, when first page has insufficient space for the next grouped products, it simply displays the group header on the first page. On the second page, it again displays the group header along with the data.
For reference, images are available at:
Image1: http://farm4.static.flickr.com/3454/3224626688_aa3cfb8236_m.jpg
Image2: http://farm4.static.flickr.com/3373/3224626782_0501cf566f_m.jpg
My requirement is to remove the redundant group header from the first page as it does not make sense without having any data below it.
I have tried the following options:
1. I tried to apply setting "Keep Group Together" on the group and "Repeat Group Header On Each Page". But when I apply this, when my second group has more than 5 products (two rows of data) and space on first page can accommodate only 1 row of data, it moves the data on to the second page instead of keeping the 1st row on first page and 2nd on second page. This solution is not acceptable to the customer as it wastes space.
2. If I remove setting "Keep Group Together" on all the groups, but keep the "Repeat Group Header On Each Page" and remove the "Keep Object Together" in the details section, I can save space. But this is not acceptable to the user as it leaves dangling headers (Orphaned Header Information).
Need some pointers to overcome this issue as it is very critical for me.
Thanks in advance,
Vibhav Agrawal

Thanks Raghavendra for your reply.
These solutions provided on the link are not useful for me because of the peculiar layout of my report.
In my report I am supposed to show details of multiple items (upto 5/6) in a single row.
All solutions suggest about adding additional header (below group header) and use the formula to use that header to put the data for initial first object and details section for the subsequent objects.
But, since i need to display multiple items in same row...and data cannot be set as 'format with multiple columns' in the header, hence this solution does not work for me
Thanks,
Vibhav Agrawal

Excluding Report Group Header!

Similar Messages

Maybe you are looking for