Excluding sites from cache

Greetings -
I am working with CE566 in a "Stand-Alone" configuration and I had a question. Is there anyway, via the CLI or web interface, to disable caching for a specific URL? We have users that are going to the same search engine sites and the results of the first user's searches are being displayed when other users try to use the same search engine. I am 99% sure that this is because the other users are receiving their search results from the CE's cache and not the Internet.
Any information would be greatly appreciated. Thx.
Joe

Joe,
you can use the rule no-cache function.
http://www.cisco.com/en/US/products/sw/conntsw/ps491/products_configuration_guide_chapter09186a00800af65c.html
Gilles.

Similar Messages

Excluding sites from favourites in safari for yosemite

In the previous version of safari it was possible to set certain sites to be "excluded" from the "top sites" or favourites page.
in Yosemite this doesn't seem to be possible - which is a bit of a step back and in my view a serious omission.
I use the same laptop for both work (medicine) and social life. I don't mind things being in my browsing history because there's nothing shameful, and anyway you have to go deliberately looking to see history. However I don't necessarily want a work colleague to whom I've let the laptop for a few minutes, to casually see details of my social life, like which dating sites I may or may not visit, or indeed which forums and discussion groups I may be a member or.
Unfortunately as my social use is probably at least as great as my professional use the "top sites" section is peppered with details of my social browsing history which I'm just not comfortable with. Please can someone tell me how to get this feature back in the new version?

Set any new window or tab to open a "blank" page.
Safari preferences / General tab.

Exclude Site from being Proxied through Scansafe\CCWS

Hi,
We are rolling out CCWS and have found that some sites behave strangely when being proxied through the towers. They are legitimate sites and not blocked. They work to an extent but will randomly crash giving Server or Proxy error / Bad Request.
If we bypass CCWS completely and point the browser out a different proxy, the site works absolutely fine.
Is there a way too stop this single site being proxied by the CCWS?
Thanks

How are you redirecting your web traffic? Are you using PAC file? If you are, you can configure exception on the PAC file to go DIRECT for those website that you would like to bypass. Alternatively, if you configure the proxy setting directly to tower, you can also configure bypass within the "Do not user proxy", or "No proxy" section.

Prevent SWF from caching?

Hi.
I have a problem here, I've been searching on google and through forums for hours now trying to find a way to prevent my site from cache in browsers. I know it's not possible to "prevent" it from caching, but it's a way to trick the browser into thinking it needs to load the SWF again instead of just getting the one from the cache.
Now I've tried many types but I can't get it to work. I don't understand how to implement it into AS or Javascript and what goes where..
My site is set up by one parent SWF combined with a HTML script and 6 child SWF's, and they are updating all the time so I really need this function.
See it here: http://www.vgn.no
The most used one is this I think or something close:
myIdentifier=Math.round(Math.random()*10000);
loadMovie("myAnim.swf?uniq="+myIdentifier,1);
If someone knows a better please tell.
But how do I use it? Can someone please explain where it goes and will it work on several child SWF's?
Thanks in advance.

Thanks. This is pasted in the HTML yes? You don't have a method for the child SWF's too?
I've read that the PRAGMA method don't always work and may sometimes only work on the HTML and not the SWF?

What is the best alternative to exclude results from a specific site collection

Hi,
We want to exclude results from a specific site collection (for example http://server/sites/demo").
A few ways are being considered:
1. Copy the Local SharePoint Results Result Source and edit it not to include results from that site collection and then set the new custom result source as default.
2. Edit the Search Results WP in the "Everything" tab to exclude those results (edit the query there)
3. Set a query rule on "Local SharePoint Results" to exclude the results from the Demo Site Collection
What is the best?
keren tsur

Hi Keren,
Modifying the Local result xlt will give you the most granularity but it is also arguably more challenging because of the "editing code" portion
On your search page you could append a query string via the search webpart but that may not get granular enough.
In the past I have used search scopes to exclude items in search results. Depending on the specific requirement it may be a quick and easy way to accomplish your task. it really depends on how ganular you need to get with excluding items from results.
A search scope can be setup be going to:
1. Site Actions (of the site collection you want to apply this to)
2. Click on Site Settings
3. Under site Collection Administration ( you have to be a site collection admin or farm admin to be able to see this section)
4. click on "Search Scopes"
5. Click on New Scope
6. Name it, fill out any other options you want and click "ok"
7. Click on your newly created search scope.
8. click on "new rule"
9. Fill out the fields based on your requirements and then click "OK"
10. I believe you will want to wait for a search to index to run before this scope will return any results.
Please let me know if you have any other questions.
Good Luck!
Alex

Syntax of a query rule to exclude results from site collection

Hi,
I'm trying to edit a query rule to exclude results from a site collection.
I'm coping the "Local SharePoint Results" and want to add something like -path=http://server/sites/demo/*
but somehow it doesn't work. can someone help with the exact syntax (should to write http, "", to write with {} etc.)
keren tsur

-SiteId:<guid>
should work. Or:
-path:http://server/sites/sitecollection
Thanks,
Mikael Svenson
Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
http://techmikael.blogspot.com/
Author of Working with FAST Search Server 2010 for SharePoint

A fix for the Mozilla Firefox SSL Certificate Validation Security Weakness vulnerability? This appears to be an issue with not revalidating certificates when loading HTTPS pages from cache.

We have to close vulnerabilities for PCI & Cybertrust certification. We have upgraded users running Firefox to version 7.0.1 but we are still receiving the message: Mozilla Firefox SSL Certificate Validation Security Weakness. Researching the issue, it appears to be related to certificates not being revalidated when loading HTTPS pages from cache. The bug report I found is:
Bug 660749 - Firefox doesn't (re)validate certificates when loading a HTTPS page from the cache

cookies.squite answer is Today at 5:15 PM .
New profile, same problem.
We've already established it is not a add-ons problem but obviously there will be less add-ons in this new profile to help exclude.
Since there is two PC profiles on the PC, I tried the second profile, same problem. Used the RESET FF function on the second PC profile...same thing...even followed the instruct for uninstall &re-install...same problem.
(3) different virus scanners, no hard core problems.
Suspect how I have something in Windows setup that no one else is using?

IE 11: Javascript files are not loaded correctly from cache?

Since installing Windows 8.1, I have been experiencing issues with script loading in IE 11: When the server responds with "304 Not Modified" in response to a script request, bad things happen. Specifically, I encounter script errors that would
normally be caused by a missing script reference or having references in the wrong order (e.g. "Unable to get property 'foo' of undefined or null reference"). Doing a force-refresh (i.e. Ctrl+F5) corrects the issue until the next page load.
Based on what I see in the IE 11 developer tools, it looks like the scripts are loaded correctly. I can open them in the Debugger view and the content appears to be correct. Perhaps IE is just not loading them in the correct order in this scenario?
I noticed this problem myself and then someone else (who has also recently installed Windows 8.1) informed me that it appears he is experiencing exactly the same issue on a different site.

I'm fairly certain this issue represents a bug in IE 11. The same problem(s) do not occur in IE 9 or IE 10. The same problems occur on unrelated websites accessed from separate machines. Doing a force-refresh (Ctrl+F5) always fixes the issue.
I took your advice about opening the console to look for error messages during page load. When loading normally (i.e. not doing a force-refresh), the console shows the following:
HTML1300: Navigation occurred.
File: TimeEntry
DOM7011: The code on this page disabled back and forward caching. For more information, see: http://go.microsoft.com/fwlink/?LinkID=291337
File: Dashboard
SCRIPT70: Permission denied
File: modernizr-2.5.3.js, Line: 468, Column: 9
SCRIPT70: Permission denied
File: jquery-ui-1.10.0.js, Line: 252, Column: 1
SCRIPT70: Permission denied
File: knockout-2.2.1.js, Line: 48, Column: 5
SCRIPT5007: Unable to get property 'extend' of undefined or null reference
File: knockout.validation.js, Line: 30, Column: 5
When loading the page via a force-refresh, only the 'Navigation occurred.' message is displayed. It does not make sense that IE would apply a more restrictive security policy to scripts loaded from cache vs. scripts loaded directly from their original location,
yet that appears to be what is happening.
Post questions about html, css and scripting for website development to the IE Web Development forum.....WITH A LINK TO YOUR WEBSITE OR A MASHUP THAT SHOWS THE ISSUE...
looks like you have a sandboxed iframe on your page.
the first step in troubleshooting IE issues is to test in noAddons mode.
Rob^_^

Error in Internet Explorer when loading from cache

Hello all,
I have this error in internet explorer when it's loading the swf from cache
"ArgumentError: Error #2015: Invalid BitmapData.
at flash.display::BitmapData()"
If you have a solution for me I will appreciate.
Thanks

I've just run into this error as well. It only occurs when you have loaded your SWF into cache and you refresh the page. This error does not occur if the user opens a new tab and visits the site (even if the cache has that SWF). Right now, I am stumped on how to resolve this issue without the help of Adobe. There is a critical site launch that depends on BitmapData to work properly.
Adobe, I will also be posting this in your bug system.

"Exclude page from menu" doesn't work

Choosing Page > Page Properties > Menu Options > Exclude page from menus doesn't work for me in the current release. Anybody else having this problem?

Humm?
Just tested both your process and again by going to Plan View > rt-click on page > Menu Options and both instantly remove the page.
Have you tried just making simple/quick test site with 2-3 pages and trying?
Maybe somthing in your site and not in Muse that's causing the issue.

Can't access secure sites from safari

I'm writing this message from my PC at home because I could not access the message board on my mac at work. At any rate, I noticed Sunday that I could not access any secure web sites from my mac (hotmail, aol, etc.) It worked fine a couple of weeks ago before I went on vacation. We had a 2 1/2 day work week last week because of Thanksgiving, so I didn't notice the problem until this past Sunday. I'm not sure when I installed the latest update, but I know that I did install all of them.
I've searched the forums for information about these symptoms, and have found several similar ones, but none of their solutions have worked for me. It was hard to go back and reference the formus due to having to restart my comptuer numerous times as directed, and because of the similarity of the search strings used to find the particular topic to begin with.
I saw several solutions involving the emptying of caches, cookies, and the like. I saw another relating to an iTunes issue of not being able to access the online store. Yes, I tried that as well and am not able to access the store on my mac. The situation is not resolved by using Firefox either. Basically, I'm shut out of anything that I have to "Login" to. Any suggestions?
iMac G5 iSight Mac OS X (10.4.8)

I've been having a similar problem on my home Mac for a couple weeks. I am not having this problem with my home PC, and the two computers share a router. Even weirder, my husband uses this laptop and he is not having the same problems. Just my userID (the admin one) is afflicted.
Safari and iTunes are still intractable. The iChat problem cleared while I was working on the others.
I switched to Firefox and can now log in to secure connections with it. I had to make Firefox the default browser and knock Safari out of the dock before it worked.
Here are the error messages:
From Safari, from which I get a similar message whenever I try to log in to any secure connection:
Safari can’t open the page “https://www.mac.com/WebObjects/Welcome.woa/1158/wa/authenticate?cty=US&aff=consu mer&rid=SKV2Bp4pL79FcdhJ&lang=en” because it couldn’t establish a secure connection to the server “www.mac.com”.
From iTunes when I try to play any of my purchases, change my password:
"iTunes could not connect to the iTunes store. The requested keychain was invalid. Open Keychain Access and run Keychain First Aid, then try again."
Needless to say, nothing I've been able to both find and understand has helped. Apple support has not been any use.
Help.
PowerBook G4 Mac OS X (10.4.8) Firefox browser

Airport blocking sites from me

got a strange problem. my airport is blocking some sites from me. i can reach the sites if i type in the server number, but if i enter it as alpha characters i get nothing. thought it was my hosting service, then my isp. once i disconnected airport and connected directly into the modem it all worked (and at a fast speed too). i've downloaded airport admin utility 4.2 (i'm running osx 10.5.2) and an old snow single ethernet port airport.
any clues on how i clear the dns records (or whatever) out of my airport so it doesn't block sites and slow things down for me?

Now how do I "ensure that the DNS server settings ... are equal to the ones used in the Ethernet section of my network preferences?"
If your Internet service provider (ISP) provides your IP address via DHCP, or if you choose your IP address manually, the DNS server settings for the base station are at AirPort Admin Utility for Graphite and Snow > (select base station) > Configure > (enter base station password) > Internet > "Connect Using: Ethernet" > "DNS servers:"
If your ISP provides your IP address via PPPoE, the DNS server settings for the base station are at AirPort Admin Utility for Graphite and Snow > (select base station) > Configure > (enter base station password) > Internet > "Connect Using: PPP over Ethernet (PPPoE)" > "DNS servers:"
The DNS server settings for the Mac are at System Preferences > Network > "Show: Built-in Ethernet" > "TCP/IP" > "DNS Servers:" (Caveat: I use OS 10.4, so if there is a relevant difference in OS 10.5, I apologize.)
Each of the DNS servers entered in these fields, if any, is represented by four numbers separated by dots. Since the settings on the Mac when it is wired to the modem seem to have no DNS problems, I expect that you could add, delete or change the ones in AirPort Admin Utility to match those.
Is there some sort of AirPort preference that I should trash? or repair permissions? Or some DNS memory that needs to get flushed?
Good question. I don't know all the places where DNS data are cached. I doubt that the base station itself collects any DNS hostname data, especially none that it retains if it has been powered down. If its DNS server settings are corrupted, I suppose that a hard reset of the base station should fix that. See Resetting the AirPort Base Station (Dual Ethernet).
One more question. As I open up AirPort Admin Utility 4.2.5 it tells me "A newer version (4.0.9) of base station software is available. Click upload to install it now." Should I do that? Will it work with my older base station and newer OS X?
Yes.

Excluding SKUs from Indexing

Hello! I`m using ATG 10.0.3. I have a problem with excluding SKUs from indexing. I tried to add rule in IndexedItemGroups
rules=
<ruleset>
<accepts>
     <rule op="includesItem">
        <valueof target="childSKUs">
        <rule op=isNotOneOf>
           <valueof target="id">
           <valueof constant="[145239206733, 145239196733, 145239216733, 145239186733, 145239176733, 145239226733]">
        </rule>
     </rule>
</accepts>
</ruleset>
But it has no effect. After reindexing I found such sku`s in BCC / Indexing Review / Content Inspection. Any pointers will be helpfull.

Hi Torsten,
if you want to exclude specific documents from Indexing you have to do the following:
1. Create a new Resource Filter (Result)
Navigate to Content Management -> Global Services -> Resource Filters -> Result Resource Filters. Create a new Resource Filter. The following will show a sample configuration:
- Include Documents/Web-Pages: checked
- Include Folders: checked
- Include Links (Not Applicable For Web-Sites): checked
- Case Sensitive (Folders And Documents/Web-Pages): checked
- Item ID Mode (Documents/Web-Pages Only): exclude
- Item ID Patterns (csv): *.jpg
- Mime Type Mode (Documents/Web-Pages Only): exclude
- Mime Type Patterns (csv): application/octet-stream
Save your settings.
You can have more information here for Resource Filters: [http://help.sap.com/saphelp_nw04s/helpdata/en/c0/6f5040b48a6913e10000000a1550b0/content.htm]
2. Create a new Crawler Parameter
Navigate to Content Management -> Global Services -> Crawler Parameters -> Index Management Crawler. Create a new Crawler and use the previous created Resource Filter (Result).
3. Create an index
Navigate to Index Administration. Create a new Index and use the previous created crawler parameter.
Best regards,
Denis

Pacman: could not remove entry from cache

Hi,
I've been getting "error: could not remove entry 'openbox' from cache" message while trying to uninstall openbox. Why?

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

How do you remove a web site from popular list?

How do you remove a web site from popular list?

luckyfromhialeah wrote:
How do you remove a web site from popular list?
If you mean from the Safari menubar item "Popular"
Choose "Show All Bookmarks" from the Bookmark menu in the main menubar, or click the icon for that in Safari's menubar -
The page that opens should show a list of Bookmarks. In the Left column, click the item under Collections named Bookmarks Bar.
In the new view, locate the folder named Popular and click the reveal triagle to the left of its name - it will open and reveal all the items listed in Popular.
Find the one you want to remove, click it once to select it, then press the Delete key on the keyboard.

Excluding sites from cache

Similar Messages

Maybe you are looking for