Excluding temporary user accounts from Time Machine back-ups

I have some temporary user accounts in addition to the default Guest account on my iMac. I currently have Time Machine backing up my entire system (the default TM setup). However, I'd like back up only my admin and permanent user accounts from now on.
Having done a little research, I believe I have the answer but want to make sure I'm including all the relevant directories. I believe the answer is to add the specific user folders to TM Preferences > Options > Do Not Backup. e.g., if my hard disk is named "MacintoshHD" and I want Users 'Account1' and 'Account2' to be excluded from all future TM backups, I would add these folders to the Do Not Backup folder:
/MachintoshHD/Users/Account1
/MachintoshHD/Users/Account2
So 2 questions:
1. Are these the right folders to make sure Account1 and Account2 are never backed up in the future?
2. Are there any other folders that i am overlooking?
Is that correct? Thanks in advance for your help!

Jeff Hwang wrote:
I have some temporary user accounts in addition to the default Guest account on my iMac. I currently have Time Machine backing up my entire system (the default TM setup). However, I'd like back up only my admin and permanent user accounts from now on.
Having done a little research, I believe I have the answer but want to make sure I'm including all the relevant directories. I believe the answer is to add the specific user folders to TM Preferences > Options > Do Not Backup. e.g., if my hard disk is named "MacintoshHD" and I want Users 'Account1' and 'Account2' to be excluded from all future TM backups, I would add these folders to the Do Not Backup folder:
/MachintoshHD/Users/Account1
/MachintoshHD/Users/Account2
So 2 questions:
1. Are these the right folders to make sure Account1 and Account2 are never backed up in the future?
yes.
2. Are there any other folders that i am overlooking?
no, those are the only folders you need to exclude.
Is that correct? Thanks in advance for your help!

Similar Messages

  • Migration Assistant Won't Migrate User Account from Time Machine

    I am trying to move my wife's user account from a Time Machine backup using Migration Assistant.  Migration assistant chugs along for 2 1/2 hours and says everything was transfered hunkie-dorie.  However, when I try to log her on, I can't.  When I log on as me, I went to System Prefs --> Accounts, her username is there.  However, when I look inside the Users folder, none of her information is there.
    thanks in advance,
    tim

    No Filevault on my computer and hers.
    Doesn't work in Save Boot, either.  That is the puzzle.  Her account appears at the login screen--even the flower pic. that was migrated from from the Time Machine backup. The login screen will not accept any password.  I know I'm typing it correctly.  Her account appears in System Prefs --> Users, but it's not in the Users folder on my disk drive.
    tim

  • Migration problem: migration assistant won't migrate both user accounts from time machine backup

    My Mac was formatted due to some technical issues. Before handing to the lab- I backed it up using time machine ( and only that ).
    I had two user accounts on the Mac before handing it to the lab.
    One of them I never actually used -I'll call it the secondary.
    The second one was the main one - which I used  all the time - the principal account. All my data is there on that account.
    The Mac was formatted at the lab.
    Using the setup assistant I migrated one user from the Time Machine Backup.
    Only later I realized it was actually the account I never used.
    Since I never used it - I couldn't remember the login password and had to reset it, took a while.
    I then tried to to migrate the principal account - the one I actually wanted to migrate, in the fist place, during the setup procedure -  using the migration assistant.
    At the relevant window I tick the principal account- the mac does some thinking and then in the login window my only options are the secondary account and guest account, the principal account is not to be seen.
    I'm really really stressed and worried.
    BTW -when looking into the actual external disk used for the Time Machine at this path: computer name--> backups-->macintosh HD -->users--> principal account - I see all the folders and files with a 'no entry' icon next to them.
    clicking on the folders - I get the following notice - 'the folder xxx can't be opened because you don't have permission to see the contents''
    What's going on?
    I'm running on a 2.9Ghz intel core i5
    16GB RAM 1600MHz DDR3
    SW version: 10.9.4
    would appreciate any kind of help,
    Thanks
    Dana

    thanks,
    the thing is the Mac was behaving strangely - that's why I sent it to the lab in the first place.
    This Mac is just over a year old but it's content was initially migrated from the older mac.
    And it (the new Mac) wasn't working properly from the get go..
    It took ages for it to start up and wouldn't start up if any external disk was attached (via USB).
    I had to start it up and only then connect external disks.
    In the lab - They couldn't find and HW issues.
    So they formatted and reinstalled the OS - I think that's all they've sone in the lab
    The idea was to start afresh and slowly reinstall softwares - only those necessary.
    So, having said all that- does that change your answer?

  • Can't restore from Time Machine back ups

    I began having problems with my 2 year old iMac which was not corrected with a re-install of Snow Leopard from the Installer disk.
    I decided to restore my startup drive from a Time Machine backup. I followed the procedures. I selected the particular back up to restore from. Restore began and indicated that it would take about 2 hours and 40 minutes. When I came back to check 4 hours later, the progress bar was completely filled in but the text below it says:
    "Restoring files (104.4%)
    Time remaining: 1690214873 hours and 30 mins"
    No progress seems to be going on. But if I just click the mouse I can hear my disks go into action and the numbers start changing on the time remaining for a few seconds and then everything stops.
    I have repeated this experience twice now, each time using a different Time Machine backup.
    Any ideas?
    Thanks.
    John

    try repairing the TM drive with disk utility on the install DVD, any errors? also, reformat the internal drive using the partition tab in disk utility on the install DVD (don't use the erase tab). then try restoring again. if nothing helps then you'll have to erase the drive again and reinstall SL from scratch. then migrate from the TM backup manually. this is quite tedious but there is nothing else to do if the restore utility is not working.
    see this link on what to restore in your home directory.
    http://discussions.apple.com/message.jspa?messageID=6185507
    one correction to this link.
    ical data is stored in ~/library/calendars.

  • HT201250 What to exclude from Time Machine back ups

    My Macbook pro backs up approx 80GB data on Time Capsule.
    What are the files to exclude to try and cut down the amount of data to back up.
    Can the frequnecy of backuos be reduced.
    Thank-you.
    Michael Houghton

    http://pondini.org/TM/9.html

  • Set up and migration assistant can't see time machine back ups

    Hi. Trying to cut this short.
    I Tried installing osx 10.8. Halfway through the installation it told me I didn't have enough free space. Helpful.
    i tried to restore from time machine, the back ups were viewable, but it said i couldn't as the disk was in use or couldn't be un mounted.
    Ive now deleted the hard drive and reinstalled 10.7.5.
    Set up couldn't restore from time machine back ups as it couldn't find them.
    Ive started osx and tried to use migration assistant. It can't see the time machine back ups.
    However, if I open the time machine app it can see the back ups.
    I've rebooted in recovery and

    Seems my text has vanished. This site is terrible on my iphone. Would expect better.
    I've rebooted in recovery and tried to restore from time machine but again it won't find the back ups.

  • Setting Up a New Mac From Two Different Time Machine Back-ups?

    Greetings Apple People,
    I am planning on getting a new iMac. Right now my wife I are still using our separate MacBooks from college. Both of them have Time Machine back-ups. We would like to setup our new iMac to have two different users. Is it possible to setup each of the users on the new iMac from our respective Time Machine back-ups?
    I know you can do this seamlessly with one Time Machine back-up, but can you do it from two different back-ups, essentially merging the two, while keeping the separate user profiles?
    Thanks!

    Follow the steps in Pondini's Setup New Mac guide using one computer as the source on first boot. Then, hook up the second computer and use the Migration Assistant to transfer the second user account and nothing else. Don't use the TM backup because it's much slower doing it that way than directly from each machine.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • I have 2 macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only loged in on her account. We both make regular time-machine back-ups each on a separate external disk

    I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?

    Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
    Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both.

  • Will existing Time Machine back ups build after 1 account migration

    I have one i-Mac happily backing up with Time Machine to an external hard drive.
    I have just bought a second i-mac (the old one's filling up) and propose to use migration assistant to move an admin account from the old to the new i-mac leaving two other accounts (and their files etc) on the old one. I see from some posts that it seems as if Time Machine will start a new back up series for the new i-mac's back ups (cos its a new MAC address). But what about the old i-mac? Will that continue to extend the existing (old) Time Machine back up files, albeit without my transferred account and its files? I'd like to end up with the old i-mac continuing to work with and build its Time Machine back ups (less my account and its new files) and have a new back up series from the new i-mac building to a separate partition on the external drive.
    Second minor point: I have read that putting a partition on the external drive is the best way forward as it will stop competition for space and allow changes in one set up in future to have no impact on the other. Is this the best way forward?
    Does this all make sense?
    Sorry but I can't see an answer in the forum to what must be a reasonably common issue in this expanding mac world.

    I then tried to move it (TM back up files) off with Restore, whilst preserving the TM back ups but I couldn't seem to do it to the i-Macs hard drive nor to partition that to allow this to happen (assuming the lack of a discrete partition was the problem).
    That's likely correct. This only works if you restore one entire partition to another, and check the +Erase destination+ box.
    The problem was that I could not (maybe for the same contiguous reasons) create a new partition on the old i-Mac just to temporarily move the TM back up to. Without it I could not 'empty' the WDC firewire drive and partition it prior to returning the TM back ups to it albeit contiguously in a dedicated partition.
    Unfortunately for me to retain the TM back ups for the account I moved to the new i-Mac, I will have to leave that account on the old i-Mac as well. I can't see a way around that? If I delete the account on it then surely I will lose the ability to Log onto it and then to click TM and see back in time on that account?
    If I understand you correctly, that will be true eventually, but not immediately, as TM will, eventually, delete it's copies of anything that's no longer on your internal HD. That will depend, of course, on how long TM can keep it's backups. But while they're still there, if you log on with Admin privileges, you should be able to view the old backups.
    Not sure I explained myself clearly. Sorry. Having understood from your earlier help that 'migrate' actually means 'make a copy in another place', I have the migrated account in two places: one now dormant, on the old i-Mac and two, where it is migrated to (the new i-Mac). But TM continues to back up all accounts, indeed everything, on the old i-Mac by dint of its MAC address. So to see the migrated account's past history I assume I have to access the version on the old i-Mac. To put it another way, when logged into one account on the old i-Mac I believe it is not possible to see the TM history and files of another account on that i-Mac despite TM backing the entire HD. You have to be logged in to that account to see it. On the new i-Mac, with its different MAC address, TM is busy creating the first TM back up and I assumed that in the migrate it did not bring TM history as I had read that it is MAC address specific.
    The only issue (apart from having this account's history spread over two machines (pre-today on the old i-Mac's TM and today onwards on the new i-Mac) is that I have all the files on both machines. I am not worried about security only unnecessary usage of disk space. It isn't critical, there's lots of it, but it just seems wasteful and untidy. Unless you guys know otherwise?
    If I understand what you've done, you do have duplicates of the current contents, but only one copy of the old backups (on the old F/W drive).
    On the old i-Mac I have the two accounts I wanted to stay there plus the now dormant account I migrated. TM continues to work away at memorising ALL these although there will be no further changes to the dormant migrated account as I will not be running it on the old i-Mac. On the new i-Mac I have the migrated account of which TM is now creating its first (huge) back up but starting today. There is no history here. So I have copies of everything; its just that the old history of the migrated account remains on the old i-Mac and a new history (does that make sense?) is building from the new one. My point was that if I were to delete the dormant account from the old i-Mac, then I could not access it to use TM with it. I believe TM only shows the history of the account and screen you're in at the time?
    There is an option in TM that will allow you to selectively +Delete all backups of+ selected items. +Enter Time Machine,+ locate and select the item(s), click the "gear" icon in the Finder window's toolbar, and select the +Delete all backups of ..+ option.
    What you can't do is, keep the backups of only previous versions of things that were changed or deleted. It's all or nothing.
    Not sure I understand this. What would have been nice but I do not think is possible is to have moved the account to the new i-Mac together with the TM's back ups of that account and continue to build it up (whilst having access to its history) on the new i-Mac. If that were (is?) possible I could have totally deleted the old account and with it its files from the old i-Mac, freed up some HD space and had a full AND growing TM history all on the new i-Mac.
    Many thanks for staying the course and for your continuing help.

  • How do you delete file from time machine back up?

    How do you delete file from time machine back up?

    This from Apple KB Article  If Time Machine is not in your Dock, you can enter Time Machine from the Menu Bar or System Preferences.
    Deleting data from a Time Machine backup
    To delete all backups of one or more items from a Time Machine backup, follow these steps:
    Click the Time Machine icon on your Dock to enter the Time Machine restore interface.
    Click on the item you would like to delete. Command-click to select multiple items.
    Control-click (or right click) the highlighted item(s) and select "Delete All Backups of..." from the contextual menu, or select "Delete all backups of..." from the Action Item menu.
    Authenticate with an administrator password when prompted.

  • Can I make one iphoto library from two time machine back-ups?

    Hi
    I have recently purchased a new Mac Book. I previously had two MacBooks, which I backed up with time machine onto two separate external hard drives.
    I did a straight transfer of all data from one of these time time machine back-ups to my new laptop. I'd like to migrate select data from the second time machine back-up to my new Mac Book, and I'd like to start by transferring photos.
    My laptop has an iphoto library, so I would like to know if I can import select photos from this second time machine back-up, and how do I do that?
    many thanks
    Linda 

    First you need to restore the second Library from the back up. You need to restore the whole library, you can't just gather bits of it, I'm afraid.
    Once that's done you have two Libraries. The easiest way to do what you want is to merge the Libraries with the paid version ($20) of  iPhoto Library Manager This can be set to avoid duplicates. See the Help on it for more.
    This is the only way that will get all the versions and all the metadata.
    Other than that you'll need to export from one Library and import to the other.
    Regards
    TD

  • I had to reformat my OSX 10.5.8 and i can't restore my emails from my time machine backup from an external hard drive - only the latest (post backup) time machine back ups are available to restore. Please can any help

    I had to reformat my OSX 10.5.8 and I can't restore my emails from my time machine backup from an external hard drive - only the latest (post backup) time machine back ups are available to restore. Please can any help? I can find the mail folder in my libraries, but the Restore Button is grayed out

    OSX treats the reformatted drive as a different one; it's the same as replacing it, and the old one is no longer connected.
    See #E3 in  Time Machine - Troubleshooting to see and restore from the "old" drive.
    And, you may not want to restore via the Finder; see the blue box in #15 of  Time Machine - Frequently Asked Questions.

  • Need to wipe hard drive to restore to previous date from time machine back up.  Unclear how to do this.  Please advise or provide link to this procedure on website.  Thanks.

    Need to wipe hard drive to restore to previous date from time machine back up.  Unclear how to do this.  Please advise or provide link to this procedure on website.  Thanks.

    See Pondini's TM FAQs for starters.

  • If i restore a user folder from time machine. is it just restoring all files associated with the user or programs also?

    If i restore a user folder from time machine, is it just restoring the files associated with the user or programs as well? Im asking because Apple Store just reset my system and said to restore files i needed and not to do a full restore. to try and determine if it was a software issue causing the problems.

    Just the user's folder. Nothing else. See Pondini's TM FAQs, for details.

  • Restore my mc from time machine back up

    How to estore my mc from time machine back up?
    thanks

    If you want to restore the Time Machine backup, hold Command and R keys while your Mac is starting, choose the option to restore the Time Machine backup and follow the steps. It will erase the hard drive, so make sure you make a backup of your files.
    If you are running Mac OS X Snow Leopard, insert the disc and hold the C key while your computer is starting. Then, choose the language, go to Utilities menu (on the menu bar), choose the option to restore a backup and follow the steps

Maybe you are looking for

  • Idoc to X12 file seeburger error

    I get the below error at the receiver file adpter,tested the mapping internally and it works fine.Can you help me please.D_165 is mapped to a constant 'U'. SEEBURGER BICXIADAPTER --- CONVERSION ERROR ---InhouseDocReader doSyntaxCheck(): offset[281]:

  • Displaying Large Images and Out of Memory Error

    hi, I am relatively new to JAVA and I have been trying to display a large jpeg in a scrollpane. The image is about 30 mb in size and is very long. When compressed the image is very small (1mb) but when uncompressed it increases in size due to the bla

  • MS 2000 Sql Index Hint In CFC Query

    How do you force the query in your function (component) to use the Index created. If you have some thing like this select * from class and a bunch of where clauses. Does CF allow for hints in the CFC's queries? any example?

  • How To send DMS(Documents cv01,cv03n,cv04n) from one sap system to othersap

    Hello Experts, I am working Document management system(CV01,cv02n,cv03n,cv04n)... I want to send the documents from one SAP system to Other SAP system Using ALE/Idocs.... Please Help on this any sample programs....or function module.... Thanks Preeth

  • What rubbish is this ?

    I have downloaded a JSF example login.war I m using tomcat5 that has come with JWSDP1.3 when i placed it in webapps folder and started tomcat the example is working fine Then i stoped tomcat and renamed login.war file to login2.war and started tomcat