Excluding values in Customer exit variable

Hi,
I need to excludes some values, but should have a option to include these values in variable screen depends on different users requirement.Default this values will be excluded.Please help me writing this code.
Will assign points,
VJ

Hi,
You can try using a select option variable without writing any code.
There you can specify default values as exclusion and if user enters their own values those will be included automatically.
Else you need to create a dummy variable (user input) to get the user input and other variable (customer exit) to include the values if user enters / exclude default values. If you still need some code sample let me know.
hope this helps.
regards
rajesh

Similar Messages

Passing multiple single values in Customer Exit Variables

Hi,
I have one requirement to Pass multiple single values in Customer Exit Variable.
If the user gives 2010 i need to get value previous fisacal year(2009),if its 2009, we need to get 2009.
Just requirement is like how to pass multiple single values?
Thanks.

Hi..
For this create a variable- Types of variable= Characteristics Value> Processing type as Customer Exit-->Reference Char as Fiscal year..
Try this code..
    when 'xxxx'.
      DATA: lv_zp0003_month(2) TYPE n,
              lv_zp0003_year(4) TYPE n.
      CLEAR: lv_zp0003_month, lv_zp0003_year.
      lv_zp0003_month = sy-datum+4(2).
      lv_zp0003_year = sy-datum(4).
If the month is January the year is set to previous year
      IF lv_zp0003_month = '01'.
        lv_zp0003_year = lv_zp0003_year - 1.
       l_s_range-low = lv_zp0003_year.
Else the year is set to actual
      ELSE.
        l_s_range-low = lv_zp0003_year.
      ENDIF.
      IF l_s_range-low = l_s_range-high.
        l_s_range-opt = 'EQ'.
      ELSEIF l_s_range-high IS INITIAL.
        l_s_range-opt = 'EQ'.
      ELSEIF l_s_range-low LT l_s_range-high.
        l_s_range-opt = 'BT'.
      ENDIF.
      l_s_range-sign = 'I'.
      APPEND l_s_range TO e_t_range.
Hope this helps.
Regards.
AKG

How to exclude values in an exit variable?

Hello experts,
I try to exclude special values from my selection via exit variable but I get an error of invalid values.
could it be that something in my selection table is wrong? Do I have to use an other value for SIGN or OPT to exclude values?
my Coding is:
l_s_range-low = '0000000404'.
l_s_range-sign = 'E'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
I tested my values with include them (SIGN = I) and this works fine.
settings of the variable are:
Type of variable: characteristc value
processing by: Customer exit
variable represents: Multiple single values.
Where is the Error?
Thanks in advance
Johannes

Hi there,
I tried once to do that, i.e., with customer defined variable use the exclude sign 'E' for a variable but it doesn't work.
Don't know why, but excluding values with 'E' doesn't work.
Although it seems stupid you might consider excluding that value directly in the query in filter, or use BT from a value till 0000000403 and other BT from 0000000405 to above.
Diogo.

Table look up using value from customer exit variable

I have a customer exit variable, CURRMON, which the user enters in the format MM/YYYY. From this entry, I would like to do the following to calculate and display the number of business days in the selected month:
Do the following to get Business Days in month.
Use the KF "FBA Day" (CTAFBAD) from the CTA_M01 infocube and write ABAP routine.
1. Based on user entry cal month get the last calendar day .
2. Do a master data look up (CTAFBAC is the master data object), using the last calendar day from step 1.
3. CTAFBAD is the attribute of CTAFBAC so move the value of CTAFBAD to the result, and display this result
Can anyone help me with this?

Hello,
You can use i step = 1 in SMOD transaction and write the code there.
l_s_range-low = sy-uname.
append ls_range to e_t_range.
regds,
Shashank

Current filter values in Customer Exit variables

Hi!
I have a pretty hard question here that I would be impressed if someone has an answer to:
The scenario is:
I have a customer exit variable that should de dependent on the current filter setting in the query. Is it possible from within the customer exit code get information about the current filter(s)?
I know that I can access other variables values, but in this case I would like to know which values that has been filtered on within BEx (after the popup screen).
Regards
Marty

You asked for:
1. In the field I_S_RKB1D-COMPUID (or GENUNIID I'm not quite sure) you get the internal query name.
2. Look in RSZELTXREF with SELTUID = I_S_RKB1D-COMPUID.
3. The filter values have LATYP = FIX (if they are in the filter box).
4. Search table RSZRANGE with ELTUID = RSZELTXREF-TELTUID.
5. Don't wonder if this doesn't work anymore after an upgrade
Best regards
Dirk

Default value of BeX customer Exit variable not Displayed in WeBI??

Hello Experts,
We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
and we are on SAP BW 7.1 and BOXI 3.1 SP4.
Regards,
Vipul
Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

Hi,
See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
WebI will prompt when executed, but the default values calculated by the user exit - do not appear.
Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
Cause
This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
--> This should be understood as meaning "User will not be shown a prompt"
regards,
H

Customer Exit Variable in formula to get values for multiple keyfigures

Hi to all,
I have query as defined in following scenario:
CHAR_X     C_KF1 (based on KF1)     C_KF2 (based on KF2)     u2026     C_KFn (based on KFn)
Value1
Value2
u2026
Valuem
C_KF = calculated key figure
I need to create a customer exit variable that will search through selection e.g. CHAR_X/KF1 and give some result. I need this variable for every keyfigure (KF1-KFn). Using customer exit variable is the only solution.
My question is: do I have to create formula variable (customer exit) representing every keyfigure separately (VAR1 u2013 VARn, like in below example)?
CHAR_X     C_KF1 (using VAR1)     C_KF2 (using VAR2)     u2026     C_KFn (using VARn)
Value1
Value2
u2026
Valuem
Or is it possible to create one general formula variable since the way to retrieve the value in variable is always the same (like in below example)? In this case, how do I pass the value of the respective keyfigure to this variable?
CHAR_X     C_KF1 (using VAR_X)     C_KF2 (using VAR_X)     u2026     C_KFn (using VAR_X)
Value1
Value2
u2026
Valuem
Thanks for your replies, points will be awarded!
Cheers

That is my concern, the value of variable is not the same.
What variable should do is:
take KF1 id, go through values for CHAR_X, get back one value
This value would always be different, and also "KF" part in code of variable should be different, based on the column where the variable is being used (so, in column C_KF1 ,variable should "pick up" id of KF1, etc.).
I hope it makes it more clear. For now, I do not have the code for variable yet, I am just interested in concept whether it is possible to pass the ID of keyfigure dynamically so I can make decision how to model this request.
Thanks

Error Message : " No value could be determined for Customer Exit Variable "

Hello BI Experts ,
I have created a "ZYTD_PERIOD" Customer Exit Variable Interval Mandatory and ready for input check mark removed.
The reference character is '0FISCPER' .
I want to have YTD figures when the user enter single Fiscal Year Period for variable 0P_FPER.
So I have written below code in SE37 : EXIT_SAPLRRS0_001 and include program : ZXRSRU01
==================================================================
case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
===================================================================
After that I use this 'ZYTD_PERIOD' variable in the query .
Also I have used the variable 0P_FPER in another structure.
When I execute the query by entering the value of 0P_FPER as 010.2009 or any other value ,
I am getting below error message ,
*No value could be determined for variable ZYTDPERIOD*_
Below is details of this Error message ,
Note that I have proper Master and Text data for 0CO_AREA and 0COMP_CODE loaded into BI.
=======================================================================
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System Response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
2. Cause of Error
The attributes for the controlling area (InfoObject 0CO_AREA) or company code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the attributes for the controlling area are not active in the BW system.
Check whether this is the cause of the error in your BW system. Display the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction se16.
Application CO:
Check whether the attributes 'fiscal year variant' (field FISCVARNT) and 'profit center local currency currency type' (field CURTP_PCA) are filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the error is with variable 0P_FVAEX. If the currency type of the profit center's local currency in OBJVERS = 'A' is empty, then the error is with variable 0P_CTPCA.
Application FI:
Check whether or not the attribute 'fiscal year variant' (field FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant is empty in OBJVERS= 'A', then the error is with variable 0P_FVAEX.
Procedure
Using InfoSource 0CO_AREA, load the attributes for the controlling area or company code into your BW system.
Afterwards, activate the attribute changes in your BW system. To do this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes', functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or 0COMP_CODE from this list, and activate the attribute changes.
=====================================================================================
Is there any special settings needed before writing BEx Customer Exit ?
I have already created a project in CMOD and assinged a proper RSR00001
and EXIT_SAPLRRS0_001 and project is active.
Any help please ....
Regards ,
Amol

My Code is as below ,
          case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
              ENDCASE.

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

Customer exit variable - missing values

Hello experts,
Has anyone ever encountered this problem?
We have a customer exit variable, based on 0VENDOR. In the customer exit we simply fill in a variable with the values in this master data table. By debugging we can see how the e_t_range structure gets filled in correctly with all the values in the master data, for example 2,300 values, the same values we expect to see in the report but we don't know why at some point after our code in the customer exit and in the standard code, our variable contains less values and only an incorrect number of values gets displayed in the final report.
Any ideas on this would be very much appreciated.
Many thanks in advance,
Inma

Hi,
Are you sure you're losing some values?
Remember that if no values exist for a master data value on the InfoCube, no line will be shown, so you could see less than 2300 lines.
You could probably try to show filter values on the query and check if they match with your e_t_range.
Regards,
David.

Error while executing customer Exit Variable (No value could be determined for variable. BRAIN 632)

Hello,
I created a customer exit variable which has to show the range between the first and last day of the previous month. The query will be executed every first of the month.
Variable is declared as: Customer exit, based on 0CALDAY, Interval, Mandatory and NOT input.
When i debug the query, it is making the calculation but its not populating my variable; when I execute the query from RSRT, the output test shows a message:
ENo value could be determined for variable ZRANGE_PREVMONTH. BRAIN 632ZRANGE_PREVMONTH
Below the code i'm using (SAP 7.4)
***Customer Exit to calculate previous month.
IF i_step = 2.
 CASE i_vnam.
 WHEN 'ZRANGE_PREVMONTH'.
DATA: LS_RA_SID TYPE RSR_S_RANGESID.
DATA: yyyy(4) TYPE n.
DATA: mm(2) TYPE n.
DATA: dd(2) TYPE n.
DATA: fst_date LIKE sy-datum.
DATA: fst_date2 LIKE sy-datum.
LOOP AT i_t_var_range_c INTO loc_var_range
 WHERE vnam = '0DAT'.
 dd = sy-datum+6(2).
 mm = sy-datum+4(2).
 yyyy = sy-datum+0(4).
 fst_date2 = sy-datum.
 IF dd = '01' AND mm = '01'.
 mm = '12'.
 yyyy = yyyy - 1.
 ELSEIF dd = '01' AND mm <> '01'.
 mm = mm - 1.
 ELSEIF dd <> '01'.
 mm = mm - 1.
 ENDIF.
 CLEAR: fst_date.
 CONCATENATE yyyy mm '01' INTO fst_date.
 fst_date2 = fst_date2 - 1.
 CLEAR: ls_ra_sid.
 ls_ra_sid-sign = 'I'.
 ls_ra_sid-opt = 'BT'.
 ls_ra_sid-high = fst_date2.
 ls_ra_sid-low = fst_date.
 APPEND ls_ra_sid TO e_t_range.
ENDLOOP.
ENDCASE.
 ENDIF.

Hi Fernanda,
Try this:
DATA: LS_RA_SID TYPE RSR_S_RANGESID.
DATA: fst_date LIKE sy-datum.
 CASE i_vnam.
 WHEN 'ZRANGE_PREVMONTH'.
fst_date = sy-datum - 1.
concatenate fst_date(6) '01' into ls_ra_sid-low.
 ls_ra_sid-sign = 'I'.
 ls_ra_sid-opt = 'BT'.
 ls_ra_sid-high = fst_date.
 APPEND ls_ra_sid TO e_t_range.
ENDLOOP.
ENDCASE.
 ENDIF.
Just post here for any queries..
Regards,
Loed

Customer exit Variable to split single date value into a range

Hi All,
we have a requirment where user will enter a date(01/21/2010) value in the variable input screen, it should be single value and mandatory, and the query output should have data for the Preceding 24 months for all 6 Key figures. (e.g. user chooses 12/15/2009, result set is 12/01/2007 - to - 11/30/2009) summarized by month,
Our query design is as given below -
since we only have DATE value in the cube, we have added FISCAL YEAR/PERIOD in the cube and mapped DATE with time chars. Now the cube has the data stored in monthly buckets using FISCAL YEAR/PERIOD . Now we have used the variables FISCAL YEAR/PERIOD to restrict Key figures and have an offset on that to get the prior 24 periods.
Since in our requirement user wants to enter Date variable asmandatory input, we create 1 customer exit variables as a mandatory & single value variable for Date Variable, and using that exit variable we thought of passing the period of user entered date to FISCAL YEAR/PERIOD which we are using to restrict Key figures and get offset of 24 months.
Can someone please help us in passing this period vaule from inout Variable Date to Fiscal year/period using CMOD, any other ideas are also welcome
Thanks in advance

Hi sateesh,
we are using DATE_TO_PERIOD_CONVERT ,but in this case if user enter's a date (01/21/2010) then we are getting output only for that date and not for the entire prior 24 months period
As per our requirment when user enter's date (01/21/2010) it should get the whole range that is entered date and 24 prior months and pass the range back to same input Variable so that in the output we get the data for entire prior 24 months
Thanks

Customer exit variable - internal table in BEX

Hi,
i am running a report and using variables in it.
The report runs over a info cube. There are few challenges in it.
One of the variable is posting date, and when user enters posting date i need to negate it with current system date.
If the negated value is greater than 28 then i need to exclude documnet type 'YG' and display the query, else i need to include the dcumnet type 'YG' and document type ' '. The above logic can be well implemented via a customer exit variable(for posting date) using an internal table. We have internal tables like C_T_DATA which is used in data source enhancement, which help us to implement our own desired logic.
Do we have such kind of internal tables, based on which the report output (result set) is derived?
i know that we have l_t_range and e_t_range, but dont know their usage, some one can explain in detail about them?
Thanks in advance.

Hi Selva & Lakshmin,
The code given by Selva is almost correct . If my understanding is clear , you also wanted to include document type ' ' when the negated value is less than 28 .
Modification in Selvas Code :
Variable 'V_DOCTYP' must be of type Multiple Single Values.
DATA : V_DATE LIKE SY-DATUM.
DATA : V_DAYS TYPE I.
if i_step = 2.
when 'V_DOCTYP'.
READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZV_PDATE''.
IF SY-SUBRC = 0.
V_DATE = loc_var_range-low.
ENDIF.
V_DAYS = SY-DATUM - V_DATE.
IF V_DAYS > 28.
l_s_range-low = 'YG'
l_s_range-sign = 'E'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ELSE.
l_s_range-low = 'YG'
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
clear l_s_range.
l_s_range-low = ' '.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDIF.
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh

Customer exit variable with exclusion

Hello all, anyone know why a customer exit variable cannot exclude values ?
I've tried with multiple, single and interval without success (it give me a generic error in the customer exit for my variable).
Only the "selection option" mode seems to be enabled to exclude values (also in debug mode with rsrt transaction).
Unfortunately, I cannot use selection option (because this exclusion is an integration of pre-existence selection on a complex structure).
We have SAP BW 3.1C, with SP16. I've looked for sap notes but nothing about this problem (may be a limit).

Now I post my code. The variable is a "Multiple Single Values", optional, not "Ready for Input".
This is my code.
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
If I_STEP = 2.
 CASE I_VNAM.
 WHEN 'ZXXXXX'.
 clear l_s_range.
 l_s_range-sign = 'E'.
 l_s_range-opt = 'EQ'.
 l_s_range-low = 'xxxxxxx'.
 append l_s_range to e_t_range.
 ENDCASE.
ENDIF.
The query raise an error (generic error on customer exit).
I've debugged the code. Error has raised from plausibility_check on RRS_VAR_VALUES_EXIT_AFTER. The following is the code that raise the error.
 CASE i_vparsel.
 WHEN rro04_c_vparsel-param
 OR rro04_c_vparsel-multiple
 OR rro04_c_vparsel-table.
 IF <l_s_range>-sign <> rs_c_range_sign-including
 OR <l_s_range>-opt <> rs_c_range_opt-equal.
 PERFORM raise USING rs_c_false g_c_ue_invalid_range
 i_vnam space space space.
 ENDIF.
From this code, it seems that with multiple selection we only have sign including and option equal.
What do you think about ?

Display Error Message in BW Report based on Customer Exit Variable

Hi
I need to display an error message in the BW report based on the value of a customer exit variable - i was able to do this successfully in BW3.5 using the below code.
WHEN 'ZUPN'. "Here ZUPN is the customer exit variable
 IF i_step = 1.
 <check for condition -- if successful, variable flag = 1, else variable flag = 0>
 IF flag = 0.
 MESSAGE e157(00). "Error Message
 ENDIF.
 ENDIF.
I have upgraded my system to BI 7.0 now. Whenever the variable check is not successful, it displays a blank screen instead of the error message in the report. Please advice if we need to change the code and how ??

Bhanu,
Thanks for u r reply.This warning message appears every time i execute the report through portal.
Any idea ?
Regards
Mano

Excluding values in Customer exit variable

Similar Messages

Maybe you are looking for