Excuse me ! Can a virtual machine run on the more physical servers ?
If a physical server has two CPUs , I have two physical servers for OracleVM group.
Can Oracle VM create a virtual machine which have 4 CPUs ?
This is a kind of HPC (High Performance Computing ) .
Is it possible ?
Thank you !!!!!!!
Unless this is some trick question then yes you can.
Moving Virtual Machines from one host to another on Hyper-V
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Similar Messages
-
Hi everyone,
I have 2x physical servers running Hyper-V 2012 R2. Each hosts several virtual machines. The VHDs of the VMs are stored on several dedicated physical disks to have a performance boost. For exampe if VM A has two VHDs attached I made sure that the VHDs are
on different physical disks to have them not slow-down each other in case of intensive disk accesses.
So far so good. I was looking forward to the replication-feature. The idea is to have the two physical servers have their primary running VMs being replicated to the other physical server and vice-versa. I was hoping to have the chance to choose for each
individual VM where the replicated VHD will be stored. But instead I can only see the one location/path which is configured in Hyper-V Manager when I activate the replication-feature on the server.
Is there by any chance a way how to select the storage location for each VHD/VM if using the replication-feature of Hyper-V 2012 R2?
Thanks in advance.
Cheers,
SebastianSecondly, you could replicate different VMs to different storage locations to perform some of the disk balancing you are trying to perform. Lastly, you could copy the vhd file to a different location
before starting the VM.
.:|:.:|:. tim
Hi Tim,
thanks for the reply. Sorry, but I had some other tasks to take care of, so I wasn't paying enough attention to this thread.
The part I quoted from your reply sounds exactly like the action I'd like to perform, but as you pointed out before this should not be possible.
How can I perform the action (replicating each VM to a storage location) as you mentioned secondly? To sum it up again:
2x physical machines carrying severel HDDs
8+ VMs spread to run on the 2x servers
when setting up replication I can only set the storage-location from server A on B and vice versa B on A
Thanks again for your reply.
Cheers,
Sebastian -
I had creative cloud installed in a parallels deskto virtual machine on my mac, I delete the virtual machine without deactivate the creative cloud. after reinstall a new VM running windows 8.1. pro 64 bits, I downloaded the creative cloud installer but it does not install ang give an Error code 72, it is assuming that I already are using the Creative cloud in 2 computer, but itis no the case, how to solve this situation?
Dave: I did the Microsoft Update two days before this happened, and rebooted as required. I just created a new restore point and lauched Creative Cloud. Now I get the famous white screen:
It just sits and spins (been 10 minutes now).
Fortunately, I saved away this command (which I've had to use 4 or 5 times already):
del %USERPROFILE%\AppData\Local\Adobe\OOBE\opm.db
Unfortunately now, I get this (even after closing the above window):
The process cannot access the file because it is being used by another process.
So I killed everything that said "Adobe" in the task manager and this time, the command succeeded.
Fortunately, the current apps seem to still work. I can't seem to find the "Creative Cloud" app in the applications on my system, but I launched Photoshop CC, told it to look for updates, and got a list of the 5 prgorams that need updates in the Adobe Application manager:
I will proceed with the updates, holding my breath. -
I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!
Thanks - Of Course the first thing I checked and did.
Disc Utility reads as follows:
Capacity : 159.18 GB (159,182,127,104 Bytes)
Format : Mac OS Extended (Journaled) Available : 11.47 GB (11,472,896,000 Bytes)
Owners Enabled : Yes Used : 147.71 GB (147,709,231,104 Bytes)
Number of Folders : 139,540 Number of Files : 511,832
Activity Monitor(Disc Usage) shows something quite interesting. Mac HD and Ramanan (Main User) - My hard drive is only 160GB! Would the retired engineer gentleman please note as well. Many thanks. Rams -
Do I need to have "Time Machine" running in the background all the time or can I turn it off and on say, once a week?
Robert Kempner wrote:
Do I need to have "Time Machine" running in the background all the time ...
It is how it is designed to be used. How Time Machine Works its Magic
Robert Kempner wrote:
... can I turn it off and on say, once a week?
Why..?
Perhaps TM is not for you... See Time Machine vs. Clones and Archives
More Info here > http://www.reedcorner.net/guides/backups/ch2.php -
Hey All,
The issue we are having is that our admins and users cannot use the web console in the Service Portal.
When they right click on the VM and go to console a new tab opens and a message appears where the Console should appear stating: Virtual Machine Manager lost the connection to the virtual machine
We have tried Chrome/Firefox and IE 9/10/11. With Firefox and Chrome it just tries to load the Console Session.
Wonder if the community can provide some insight.
ThanksHi Boris,
Are your hosts Hyper-V hosts? Console connect makes use of an ActiveX control and users will need permission to install the ActiveX control.
This ActiveX control will then connect directly to the Hyper-V host that is running the virtual machine, which requires the client computer to have connectivity to the Hyper-V hosts and the user will need permission on the Hyper-V server.
Kind Regards,
Richard
This posting is provided "AS IS" with no warranties, and confers no rights. -
Can a virtual machine created on one server run on any other server?
Hello Community
If you have 7 Servers (named "Server1" ... "Server7") all running WS2012 R2 server Standard Edition,
which you get to create 2 Virtual Machines (using Hyper-V) at no extra cost.
The question is:
Knowing that each server has its own IP address and may even be on a different subnet(s)
or the same subnet, if you create 2 virtual machines on (for example) "Server3" will those virtual
machines be able to run on any of the other 6 servers?
Thank you
ShabeautUnless this is some trick question then yes you can.
Moving Virtual Machines from one host to another on Hyper-V
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Is a Java Virtual Machine different from the Java Runtime Environment?
Ok I have heard people say they are running a java virtual machine, but how is that different from the Java Runtime Environment you install on any computer to run Java? Also if it is different what is the purpose of it and using commands like this:
-Xms512m -Xmx1024m -XX:MaxPermSize=256m -XX:+UseParNewGC -XX:+UseConcMarkSweepGCI've noticed lately that at certain web pages a window
titled "Install on Demand" pops up and says that I
need to download "Java virtual machine." When I press
on the download button another window pops up that
says it was unable to download and that I should try
again or go to Windows Update to install the
component. When I do the Windows Update, at the
Windows Update website it states that there are no
updates available for my computer at this time. What
should I do?
Thank you in advance.I am having the same problem. I downloaded the JVM download from the sun homepage... and I still can't use digichat applet.. anyone have a fix?
>
> -
Hello,
I've a build node that is constantly crashing and rebooting.
When I go to system event log I'm not able to identify the reasons for such behavior.
For instance regarding the machine latest crash I can see: The previous system shutdown at 10:24:57 on 27-02-2015 was unexpected.
But when I try to find some entry corresponding to that time i see none!
System:
* Information 27-02-2015 10:25:53 Kernel-General 12 None
* Information 27-02-2015 10:22:50 Service Control Manager 7036 None
Application:
* Information 27-02-2015 10:26:05 User Profile Service 1531 None
* Information 27-02-2015 10:21:11 ClearCase 1024 View
I ran the MiniToolBox to get a comprehensive list of errors that I'm having in this machine and hoppe that you can help me, pleaseeeee...
MiniToolBox by Farbar Version: 30-11-2014
Microsoft Windows 7 Enterprise Service Pack 1 (X64)
Boot Mode: Normal
========================= Event log errors: ===============================
Application errors:
==================
Error: (02/27/2015 10:27:54 AM) (Source: WinMgmt) (User: )
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 02:29:00 AM) (Source: WinMgmt) (User: )
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
System errors:
=============
Error: (02/27/2015 10:26:07 AM) (Source: Microsoft-Windows-GroupPolicy) (User: NT AUTHORITY)
Description: The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Error: (02/27/2015 10:26:05 AM) (Source: NETLOGON) (User: )
Description: This computer was not able to set up a secure session with a domain
controller in domain PT-RD due to the following:
%%1311
This may lead to authentication problems. Make sure that this
computer is connected to the network. If the problem persists,
please contact your domain administrator.
ADDITIONAL INFO
If this computer is a domain controller for the specified domain, it
sets up the secure session to the primary domain controller emulator in the specified
domain. Otherwise, this computer sets up the secure session to any domain controller
in the specified domain.
Error: (02/27/2015 10:26:04 AM) (Source: EventLog) (User: )
Description: The previous system shutdown at 10:24:57 on 27-02-2015 was unexpected.
Error: (02/27/2015 02:27:28 AM) (Source: Microsoft-Windows-GroupPolicy) (User: NT AUTHORITY)
Description: The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy
has succesfully processed. If you do not see a success message for several hours, then contact your administrator.
Error: (02/27/2015 02:27:26 AM) (Source: NETLOGON) (User: )
Description: This computer was not able to set up a secure session with a domain
controller in domain PT-RD due to the following:
%%1311
This may lead to authentication problems. Make sure that this
computer is connected to the network. If the problem persists,
please contact your domain administrator.
ADDITIONAL INFO
If this computer is a domain controller for the specified domain, it
sets up the secure session to the primary domain controller emulator in the specified
domain. Otherwise, this computer sets up the secure session to any domain controller
in the specified domain.
Error: (02/27/2015 02:27:25 AM) (Source: EventLog) (User: )
Description: The previous system shutdown at 02:26:03 on 27-02-2015 was unexpected.
Error: (02/26/2015 08:57:10 AM) (Source: NETLOGON) (User: )
Description: This computer was not able to set up a secure session with a domain
controller in domain PT-RD due to the following:
%%1311
This may lead to authentication problems. Make sure that this
computer is connected to the network. If the problem persists,
please contact your domain administrator.
ADDITIONAL INFO
If this computer is a domain controller for the specified domain, it
sets up the secure session to the primary domain controller emulator in the specified
domain. Otherwise, this computer sets up the secure session to any domain controller
in the specified domain.
Error: (02/26/2015 08:56:49 AM) (Source: Service Control Manager) (User: )
Description: The Serviço McAfee Framework service did not shut down properly after receiving a preshutdown control.
Error: (02/25/2015 11:46:47 AM) (Source: NETLOGON) (User: )
Description: This computer was not able to set up a secure session with a domain
controller in domain PT-RD due to the following:
%%1311
This may lead to authentication problems. Make sure that this
computer is connected to the network. If the problem persists,
please contact your domain administrator.
ADDITIONAL INFO
If this computer is a domain controller for the specified domain, it
sets up the secure session to the primary domain controller emulator in the specified
domain. Otherwise, this computer sets up the secure session to any domain controller
in the specified domain.
Error: (02/25/2015 11:46:45 AM) (Source: EventLog) (User: )
Description: The previous system shutdown at 11:45:21 on 25-02-2015 was unexpected.
Microsoft Office Sessions:
=========================
Error: (02/27/2015 10:27:54 AM) (Source: WinMgmt)(User: )
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 02:29:00 AM) (Source: WinMgmt)(User: )
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
CodeIntegrity Errors:
===================================
Date: 2015-02-11 18:03:17.169
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-11 17:50:22.246
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-10 18:04:17.899
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-10 09:43:55.630
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-09 19:24:39.416
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-09 18:23:59.507
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-09 18:08:08.200
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-09 17:54:14.784
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-09 17:45:34.193
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-09 17:23:19.617
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
=========================== Installed Programs ============================
Cloud Services WMI Provider (HKLM-x32\...\{DA507693-A089-4D66-B88F-C468AE658FE5}) (Version: 1.1.5464.28193 - Spiceworks)
CRT-71 (x32 Version: 1.00.0000 - IBM) Hidden
GSKit8 SSL 32-bit (x32 Version: 8.0.50.16 - IBM) Hidden
IBM Installation Manager (HKLM\...\IBM Installation Manager) (Version: - )
IBM Rational ClearCase (HKLM-x32\...\IM-com.ibm.rational.clearcase.nt_i386) (Version: - )
InstallAnywhere 2012 (HKLM-x32\...\InstallAnywhere 2012) (Version: 14.0.0.0 - Flexera Software LLC)
McAfee Agent (HKLM-x32\...\{EBF3D65F-011E-44D2-8F4F-C74B52682EDD}) (Version: 4.8.0.1500 - McAfee, Inc.)
Microsoft .NET Framework 4.5.2 (HKLM\...\{92FB6C44-E685-45AD-9B20-CADF4CABA132} - 1033) (Version: 4.5.51209 - Microsoft Corporation)
Microsoft .NET Framework 4.5.2 (Version: 4.5.51209 - Microsoft Corporation) Hidden
Microsoft Silverlight (HKLM\...\{89F4137D-6C26-4A84-BDB8-2E5A4BB71E00}) (Version: 5.1.20913.0 - Microsoft Corporation)
Microsoft Visual C++ 2005 Redistributable (HKLM-x32\...\{710f4c1c-cc18-4c49-8cbf-51240c89a1a2}) (Version: 8.0.61001 - Microsoft Corporation)
Microsoft Visual C++ 2005 Redistributable (x64) (HKLM\...\{ad8a2fa1-06e7-4b0d-927d-6e54b3d31028}) (Version: 8.0.61000 - Microsoft Corporation)
Microsoft Visual C++ 2005 Redistributable (x64) (Version: 8.0.59192 - Microsoft Corporation) Hidden
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17 (HKLM-x32\...\{9A25302D-30C0-39D9-BD6F-21E6EC160475}) (Version: 9.0.30729 - Microsoft Corporation)
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219 (Version: 10.0.40219 - Microsoft Corporation) Hidden
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219 (x32 Version: 10.0.40219 - Microsoft Corporation) Hidden
microsoft.vs6 (x32 Version: 1.00.0000 - Your Company Name) HiddenHi JoseRebelo,
According to the title ,do you mean the host machine will reboot when we start the virtual machine and the virtual machine will crash or just the virtual will reboot ?Have you got a BSOD(Blue screen) ?
Did the issue occur before ?Have you installed any third party software recently ?
Please ensure the host machine has got the latest updates.
I suspect there may be a third party conflicts here.
Please try clean boot to have a troubleshoot .
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
If the issue occured recently ,we can try to perform a system restore to recover the machine to a previous point ot have a check.
Best regards -
on a backup DNS w2008 R2 server I tried create a new VM.
[Window Title]
New Virtual Machine Wizard
[Main Instruction]
The server encountered an error while configuring hard disk on SEPmW8.
[Content]
You might not have permission to perform this task.
[Close]
when I tried creating v a new Vhd using default or custom folder, I get
[Window Title]
New Virtual Hard Disk Wizard
[Main Instruction]
The server encountered an error trying to create the virtual hard disk.
[Content]
You might not have permission to perform this task.
[Close]
But I verified the admin ID does have full access to the folders. furthermore it belongs administrators, domain Admins, enterprise admins,
What gives? what additional privilege I need to give to the login ID, I tried in vain adding to Virtual machines but got rejected. I also could not locate anything like virtual machines in the active directory,
Btw I finally managed to create a new VM wi/ VHD but still can't create new vhd
------------Platform info ---
the physical quad core Xenon server for backup dns also works as exchange server
has 12 GB RAM, 931 GB Raid 5 storage with 325 GB free.These actions are not performed in the security context of the user. The Local System / computer account of the Hyper-V Server is what needs the access, not the user.
Also, many AV products will cause these problems if the exclusions are not set properly, as they block the hypervisor from doing its job.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat. -
Hi Everyone.........
I have virtual Server machine Current Running Server 2008 r2 data-center, and try to upgrade server 2012 r2 data-center but unfortunately not Upgrade and Showing Errors like below....
how to upgrade virtual server machine in server 2012 r2, Please help me for this Issue .I recommend doing a fresh install of Server 2012 R2 on the bare metal, enable the Hyper-V role and migrate the VMs over using these steps:
Shutdown the VMs on the current 2008 or 2008 R2 Hyper-V host(s)
In Hyper-V Manager, delete all snapshots and saved states of all VMs.
Set all the VM vNICs to use static MAC
Export each VM
On the new 2012 R2 Hyper-V server, import the VMs
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx -
How do you get the two step security to work with virtual machines running under parallels?
I use Quickbooks running on a virtual PC under Parallels. I have always have Quickbooks interface with Thunderbird on the PC side to email invoices to customers using my apple email account.
Once I switched to two-step verification security, Apple doesn't recognize the "new" computer trying to access my mail account, but it also doesn't send any kind of code to a second device to authorize the access.
For now, I've had to switch back to the traditional security and the above process immediately works again 9without asking me any security questions).
Is there a way to have Apple recognize the virtual PC (or any other non-Mac computer) with two-step verification security?You have to go to your Apple ID and generate application specific passwords.
Apple ID - Manage -
Because of security restrictions, we are not allowed to have the JDK installed on our web server machine. Is there a way to run SunOne 6.1 using only the JRE?
In the 6.0 version of SunOne, there was an option to specify use of the JRE rather than the JDK. I don't see this option in the current version.
Does anyone know if this is possible?
Thanks.The reason for not allowing the JDK (as opposed to the JRE) is because this is considered a "development tool". I.E., you can compile code using the JDK, which you cannot do with the JRE.
As far as the contents of /bin? I am assuming you are referring to the /bin directory that is under the SunOne root install. Correct me if I am wrong, but this only contains the JRE. I looked, but don't see the JDK under there.
Any insight would be appreciated. -
Is it normal for me to be hearing the iPhone 6 fan/machine running from the speaker
when I put my ear To the iPhone 6 speakers I could hear the machine or the fan running loudly is that normal?
Since it contains no fan or other moving parts (other than the buttons, of course), no.
-
Can 2 ipods be run off the same itunes so that each has its own playlist?
my wife and i both have ipods, but when we plug them in the comp syncs and allmusic is taken/ added weather you wanted it or not, can itunes have 2 different accounts so i dont have my wifes music on my ipod?
http://support.apple.com/kb/HT1495
Maybe you are looking for
-
I am using Lightroom 3. I have been using 3 Nik Software plug-ins from my edit key. All of a sudden only one plug-in will work. The other two are not even showing up in my edit box.. They are in my system, because they appear when I click on thei
-
I am trying to create a print ready PDF from a word file with unacceptable results.
I am trying to create a print ready PDF from a word file with unacceptable results. The word file has a trim size of 6" x 9". It has been set to mirror margins with the inner, top and bottom margins set to 0.75", the outer margin is set to 0.5" and t
-
HI, WE have sucessfully installed Java Addin for ABAP system. After sucessfully installation of central Instance for Java Add-in, we were unable to find Java instance in MMC. During the installation we have installed central services instance (SCS) j
-
How do I update my iPad to iOS, How do I update my iPad to iOS
How do I update my iPad to iOS
-
The TCP/IP connection was unexpectedly terminated by the server (NNTP)
I had a prior thread on this topic which was apparently closed to further posts: http://homecommunity.cisco.com/t5/Wireless-Routers/The-TCP-IP-connection-was-unexpectedly-terminated... so I'm opening this new thread. The problem was never solved and