EXE can't find system subVIs

I have a 8.6 application working fine as a VI, but when i build an exe and run it (on the same computer), it can't find some system VIs from vi.lib. Every time it is launched, it prompts for the files and i have to browse manually for them.
I read in another post that "there is a known issue with LabVIEW 8.5 when
trying to build an app out of a VI that uses a static VI reference to
reference itself", this could be the problem, but i can't find information about this issue

How do you call those vis? Dynamicly?
If yes, then you have to include those vis in the executable at "always include"
Attachments:
Clipboard-2.jpg ‏22 KB

Similar Messages

Trying to update apple tv (small black box). how do i do update? can't find system settings. i see system preferences no mac pro. does apple tv need to be plugged into hdtv for the update or PC. If PC, how?

trying to update apple tv (small black box). how do i do update? can't find system settings. i see system preferences no mac pro. does apple tv need to be plugged into hdtv for the update or PC. If PC, how?

You have to do it on the Apple TV itself while it's plugged into a TV so that you can see its screen.
I quote
How to update software on your Apple TV (2nd and 3rd generation)
Learn how to update the software on your Apple TV (2nd and 3rd generation). It's always a good idea to have the latest software on your Apple TV.
Update your software
Select Settings > General > Update Software. Apple TV checks for an available update; if one is available, a download message should appear.
Click Download and Install to start the download process.
Do not disconnect your Apple TV during the update process. The Apple TV status light may flash slowly during the update and restart process. This is expected behavior.

Where can i find system profiler in lion?

where can i find system profiler in lion?

It's now named System Information, but is otherwise in the same location.
(61410)

MacOS can't find system updates

Hello
I've got an issue with my Mac OS system. The thing is the system can't find system updates in AppStore application. I can see updates for applications but not for system. For instance, when I open iTunes I have a massage that update for iTunes 12.0.1 is available, but when I switch to AppStore I can't see this update in update list.
Actually I've updated to 10.10.1 by direct downloading update package due to absence of 10.10.1 update in my AppStore update list.
The problem appeared when I updated for 10.10 from my 10.9 OS.
Any ideas?
Thank you in advance

Yes, that is normal, when you had Mavericks before you will see that also with the "download" button. AS it says.
This "download" is a real download (inc the update if there is any) and it downloads the whole OSX: you can do that easier with the RecoveryPartition:
hold CMD+R keys while starting up, it opens in the Recovery Partition, choose install OSX: it downloads and installs the latest updated OSX, it leaves your user data and settings alone.
the "update" buttons do the same as in the Updates Page.
But if there is an update of the OSX, it should also be in the Updates Tab of Appstore: there you install only the update.
Yosemite is at the moment at 10.10.1, see yours in Apple->About this Mac.
Lex

HELP - iMac can't find system file for start-up

Hi,
My Rev. B iMac (running OS 9.2) suddenly can't find the system file. I was working in MS Word for Mac when the system crashed. Upon start-up the computer couldn't find the system and showed a flashing question mark in an old floppy disk icon.
I started from my original OS 8.5 Install disk and ran disk utilities. That fixed a problem that was detected.
BUT the flashing disk continued at start-up.
I tried to "re-bless" the system folder as described in the Apple iMac trouble shooting guide, but no luck.
All my data is still on the hard drive, I just can't get the machine to start from the hard drive -- it will only start from the Install CD.
Any ideas on how I can get it to start up?
I really don't want to reinstall OS 8.5 and then go through the upgrade to get back to OS 9.2 again if I don't have to!
Thanks,
Mike

Hi, Michael -
Welcome to Apple's Discussions.
I really don't want to reinstall OS 8.5 and then go through the upgrade to get back to OS 9.2 again if I don't have to!
Installing OS 8.5 is not needed, since there is no update available to take any version of OS 8 to any version of OS 9. An OS 9 install must start with a full-install CD; for your model, that means any retail OS 9 Install CD (white label, gold 9).
What version of OS 9 was on the hard drive - OS 9.2.1, or OS 9.2.2?
What version OS 9 Install CD do you have available?

HT4623 I. Can't find system update under general to update where can I find it

Iam trying to update my ios but once I go under general I'm suppose to see system update and I can't .I have iPad one. Please if you know anything about this let me know.

The option is only available in iOS 5 and later.
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

20" intel iMac is having bad week, "Sleep" hiccup, now can't find system

Hi all,
I'm running a 20" intel iMac, purchased new in January 2008. It's been a trooper.
A handful of days ago, it developed an odd glitch. The fan would "power down" like what one hears when the computer would go to sleep -- but this would be in the middle of use. It would immediately come back up. No screen dimming. On most occasions, this would take down open and in-use programs (for example, Safari).
Today it again did this, and shortly thereafter, the system "froze" (cursor was movable but no reaction from any open program; no visible activity from anything running). I rebooted by holding the power key for 10 seconds, waited for some time (±15 minutes), then came back to power it on. It powers up, fan spins up, white screen with apple and the spinning wait icon (not the beachball, but the "clock lines" one normally sees at restart). It does not progress beyond this point.
In short, I see this as two troubles that I need help with.
1. The system was damaged/corrupted during the last startup, and the drive can no longer see it.
2. There is a problem with the fan, a possible overheating issue, or perhaps an issue with a power module/SMC. The fact that programs are crashing with this makes me somewhat skeptical of this being merely "dusty fan" or even common overheating.
I'd like an idea of what steps to take next, either to diagnose what is wrong with my iMac, or to bring her back to health.
Message was edited by: gwenners

HI,
Unfortunately, it sounds like the startup disk needs replacing.
Boot from your Mac install disk and run Disk Utility.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If you cannot boot from your install disc, try booting in Safe Mode
What is Safe Mode
If the hard disk appears to be ok, you could try Resetting the SMC
Carolyn

HT2490 I can't find System Preferences on my Mac. I can locate the Apple menu and click on the System Preferences tab, but the System Preferences refuses to launch. Help!

I can locate the Apple menu and click on the System Preferences tab, but the System Preferences refuses to launch. Help!

I think it must be missing from the Applications folder.
Do you have your 10.4 Install Disc to do an Archive & Install?

Can not find system configuration

hey,
i thinh i deleted "system configuraton" . how can i get it back?
thanks for helping me!

Hi
Do you mean System Preferences? Did you just remove it from the dock, or did you actually delete it from your Applications folder (where it normally is)? If you actually deleted it (and it's not in the trash), you may need to use Pacifist to recover it.
Matt

Can't find System Health in Lenovo Companion for Yoga 2 12

Hi,
I've just got my Yoga 2 - 13. Downloaded the new Lenovo Companion app but unfortunately I don't see the System Health option under My System. Is there any additional app that I need to install?
Thanks
Solved!
Go to Solution.

Bob,
Great question!
Unfortunately, System Health in Lenovo Companion requires Lenovo Solution Center: http://support.lenovo.com/us/en/downloads/migr-73783. Unfortunately, Lenovo Solution Center is not available on the Yoga 2 (13”). We apologize for any inconvenience.
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Firefox won't start can't find firefox.exe in processes

I recently was having problems with my computer where it would crash and I had to do a system restore. I am now not able to open firefox, I found this page explaining how to fix the problem:http://support.mozilla.com/en-US/kb/Firefox+will+not+start?s=icon+won%27t+open&as=s The solution says to delete the process of firefox.exe in the task manager, however I can't find this process. Any help?
== This happened ==
Every time Firefox opened
== Today: July, 7. 2010 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; .NET CLR 3.5.30729; .NET CLR 3.0.30729; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C; AskTB5.6)

thanks for the reply mehok, but I have tried restarting my computer numerous times and also reinstalling firefox but still no luck!

Where can I find the "install.flashplayer" exe file after downloading it

I successfully downloaded flash player for Firefox 24 several times (with no error messages), but I can't find the exe file anywhere. Where is it? I uninstalled a previous Flash Player version with Windows uninstaller by mistake, and now I don't have any flash player. I can't tell if javascript is enabled. My Windows 7 64-bit system requirements are met. What can I do? I've followed the Adobe instructions, but nothing I've tried has worked. Can anybody help?

Downloads usually go to the Downloads folder. Try downloading it again from
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

I accidentally deleted QuickTime from my computer. Then I did a system restore and retrieved it. Now Itunes can't find QuickTime and will not open. Is there a fix for this without my Ipod?

I accidently deleted QuickTime from my computer. Then I did a system restore and retrieved the program. Now Itunes can't find QuickTime and will not open.Is there a eazy fix for this without using my Ipod? Ihave 6K songs in Itunes that I can't get to.
Thank You
T-BILL

Hmmm. There's a couple of things that might be going on with that one.
Let's try an uninstall and reinstall of QuickTime first.
If you're using XP, head into your Add or Remove Programs control panel. Select "QuickTime", click "Change" and then click "Remove".
If you're using & or Vista, head into your Uninstall a program control panel, select QuickTime, and then click "Uninstall".
You can get QuickTime back either via Apple Software Update (in your Start menu go "All Programs > Apple Software Update" ... QuickTime should appear in the "New Programs" section), or by downloading a QuickTimeInstaller.exe from the following location:
http://support.apple.com/kb/DL837
Does your iTunes launch properly now?

I need to reinstall Itunes but I can't find Itunes in my system to do so, Help please?

So recently my computer has been having some trouble and I have found what was causing it and put a stop to it, but now apparently I need to update my itunes, but to do so I need to reinstall Itunes, but before that I can do that, I need to change my path to my Itunes which I can't find anywhere. So I got reading a question similar to this and saw that I should install msicuu2.exe version 3, so I tried but because my system likes to play up it states that it can effect my system and block it out, leaving me with nothing else. I have done everything I can to fix everything defrag ectra even my wizz tec friend can't find itunes. So does anyone know what I can do? I'm a person who can't exsactly with music or my books which are on there. I would Put them on my Phone but my memorys full with documents from my writing. Please please help me out.

but to do so I need to reinstall Itunes, but before that I can do that, I need to change my path to my Itunes which I can't find anywhere.
What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.)

Can't find program: vncpipehelper.exe

Hello everyone and happy new year,
I used MDT to silently install RealVNC server 5.1 to win 7 installation. It went fine and could connect to machine until I joined the pc to domain. When I try now to connect to it I get ‘Connection refused (10061). The service is running but the RealVNC
server icon is not in taskbar. When I go to programs and click on ‘VNC server’ it doesn’t do anything.
In event viewer I get “UiProcess: Can’t find program: vncpipehelper.exe. The system cannot find the file specified.
Could have this file been deleted when I joined the domain?
Thanks,
Archie

Hi Archie,
Connection refused (10061): No connection can be made because the destination computer actively refuses it. This error typically results from trying to connect to a service that is inactive on the foreign host, that is, one that does not have a server program
running.
vncpipehelper.exe belongs to product VNC® and was developed by company RealVNC Ltd. This file has description VNC® Server.
As I known, common causes of this problem are:
1.That the service is not running
2.That the service is not running on the port you contacted
3.That the internal IP of the VNC Server has changed, invalidating the port-forward rule in the router
Another cause of this error can be: when the machine is very slow, the UI process exits with a MsgBox if it can't connect back to the server within one second. This happens without any connection attempt to VNC Server from VNC Viewer. This issue
is fixed in VNC 5.0.3.
To download the latest version, please go to
www.realvnc.com/download/vnc/latest/
Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Hopefully you could resolve your issue soon.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

EXE can't find system subVIs

Similar Messages

Maybe you are looking for