EXE DOES NOT START AFTER DOWNLOADING

I downloaded lr 4.3 but double clicking it does not open the exe. When I double click older lr downloads they still open normally.Right clicking and open does not work either. What to do?

Windows Vista Home Premium 6.0.6002 SP2 Build 6002, Intel Core 2 Quad
Q9300 2.5GHz. When I double click the download, the arrow starts rotaing
for about 30 seconds and then disappears without any new window opening
Op 17/12/2012 23:55, Jeff A Wright schreef:
>
      Re: EXE DOES NOT START AFTER DOWNLOADING
created by Jeff A Wright
<http://forums.adobe.com/people/JeffAWright> in /Downloading,
Installing, Setting Up/ - View the full discussion
<http://forums.adobe.com/message/4928607#4928607

Similar Messages

  • Firefox 8 upgrade file does not start after downloading it.

    I am using Firefox 3.0.19. I tried to download the .exe for firefox 8 in order to upgrade, but when I start the exe, the only window that pops up is asking if I want to run the upgrade under this user or another. When selecting my user (I have admin rights), the window closes and nothing happens.
    Do I first need to uninstall Firefox 3 ?
    And also, will my bookmarks be kept when upgrading (of course without first uninstalling ff 3). Or which file should I backup and where should I place it back?

    Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
    Uninstall your current Firefox version if possible.
    *Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You may have to start the installer as administrator via the right-click context menu: Run as Administrator
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • App Rejection: After purchasing the subscription the magazine does not start to download.

    Hi Everyone,
    My app has been rejected, with error code 2.2 that it exibits bugs namely "After purchasing the subscription the magazine does not start to download.".
    When I've gone back to test my app on the ipad, I've realised that it doesn't say 'purchased' after confirming the subscription, and instead it still says 'buy' and the subscribe button is still enabled.
    I've followed the instructions in this article: http://helpx.adobe.com/digital-publishing-suite/kb/subscription-fail-ios-renditions.html, I've set all published dates to the 29th of October 2012 both in the Folio Producer Organiser and in itunes connect (Newsstand, in-app purchase section) and it still doesn't work. I've entered the secret code in the administration area also. The subscription product ID is identical in itunes connect and the Viewer builder. I've deleted the app and re-downloaded it multiple times on the ipad, updated the folio in the folio producer many times...
    Can anyone see what I might be doing wrong? Is there something I have missed?
    I appreciate your help.

    @FLTAron, were you able to resolve your issue, 'cause I am facing  exactly same issue

  • PI7.11(PI7.1 EHP1) sapcpe.exe can not start after upgrade tokenerl  patch65

    Hi,
      When I upgrade PI7.11 kernel (On Operator system WIN2003 server x64 64BIT) from patch level 62 to patch level 65
      or higher level 67 or71   with JSPM,
      after deploy SAP can't be started with error that sapcpe.exe can not start and in 'RED' status.
      It's worked before patch level 62.
      Did anybody occur the same problem?
      Can you give me some advice?
      In my WIN2003 server x64, I have the follow DLL libraries:
      Microsoft redistributable runtime DLLs VS2005 SP1(X86)
      Microsoft redistributable runtime DLLs VS2005 SP1(X86_X64)
      Microsoft redistributable runtime DLLs VS2005(X86)
      Microsoft Visual C++ 2005 redistributable
      Microsoft Visual C++ 2005 redistributable(X64)
      Microsoft Visual C++ 2008 redistributable SP1(X64)
    Edited by: IBM China on Feb 4, 2010 12:56 PM

    >   after deploy SAP can't be started with error that sapcpe.exe can not start and in 'RED' status.
    Please check your event log and see if you use the current runtime. A new runtime library is necessary to fix an ATL security issue, see
    Note 1375494 - SAP system does not start after applying SAP kernel patch
    Markus

  • Rented movie does not play after download if not connected to the internet

    rented movie does not play after download if not connected to the internet

    Hello b noir.
    Thank you for your interest in solving my problem.
    What I did I opened iTune. I read the information about what does my computener need to play back a rented movie. My computer is okay to play back rental movies. So I went to the iTunes store, I searched for the movie I want to watch, i singned in into my Mac account and I bought the movie. The movie started to download to my computer, it took some time because I bought a HD version, but it never stop and after a couple of hours or little less the movie was in the Rented folder of my iTunes and also I checked to be sure that was in the movie folder. So, next day I open iTunes and click on the movie, it opens but I wait for five minuetes and never started to play back, so I tried several time and I looked for info in different internet forums but I couldn't find anything that help. So I posted the problem in this forum and also I called Apple. Apple contacted me and they let me to download the movie again. So I did it and now I will watch the movie later. Not sure if the movie will play back normally or if I am going to have the same problem. I'll keep you posted.
    Apple representative did not know why this happened.
    Thanks.

  • JControl.exe does not start...Database Initialisation Problem...MS SQL

    Hi,
    I was wondering if anyone has any idea on why JCONTROL.exe does not start. I am currently installing NW04s EP7. The DB is on another host and te SCS and CI are on a different host. I am going throught the installation when I get the following error fro the Bootstrap file.
    I have already done the following steps:
    1. entered the SAP<SID>DB password
    2. SQL is started and running on the second host.
    3. The bootstrap.propeties files look the same as any other file EP system on our network
    [Mar 7, 2007 5:32:35 PM  ] [Bootstrap module]> Problem occurred while performing synchronization.
    [Mar 7, 2007 5:35:45 PM  ] -
    [Mar 7, 2007 5:35:45 PM  ] Bootstrap MODE:
    [Mar 7, 2007 5:35:45 PM  ] <INSTANCE GLOBALS>
    [Mar 7, 2007 5:35:45 PM  ]  determined by parameter [ID0117060].
    [Mar 7, 2007 5:35:45 PM  ] -
    [Mar 7, 2007 5:35:46 PM  ] Exception occurred:
    com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
         at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
         at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
         at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    ==[ Caused by: ]==----
    com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist
    PC04315\sapmnt\ET1\SYS\global\security\lib\tools
         at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:212)
         at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
         at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:60)
         at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
         at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
         at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    [Mar 7, 2007 5:35:46 PM  ] [Bootstrap module]> Problem occurred while performing synchronization.
    Many thanks,
    Adil Zafar

    ==[ Caused by: ]==----
    com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist
    PC04315\sapmnt\ET1\SYS\global\security\lib\tools
    Do you have strong encryption on your current system?

  • HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

    My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

    "UPAD lite?"
    I expect that you mean some version of iPad.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • RAC does not start after trying to move storage

    Hello,
    We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
    RAC does not start after we reformated the storage to RAID 10.
    What we did:
    1) deleted the database
    2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
    3) on both nodes
    - recreated VotingDisk
    node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
    Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
    successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
    node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
    Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
    successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
    - tried to move OCR but was able only on one node:
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
    These return ok for both node1 and node2:
    node1:oracle$ cluvfy stage -post hwos -n node1
    node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
    Performing post-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "node1"
    Destination Node                      Reachable?
    node1                                 yes
    node2                                 yes
    Result: Node reachability check passed from node "node1".
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name                             Comment
    node2                                 passed
    node1                                 passed
    Result: User equivalence check passed for user "oracle".
    Checking Cluster manager integrity...
    Checking CSS daemon...
    Node Name                             Status
    node2                                 not running
    node1                                 not running
    Result: Daemon status check failed for "CSS daemon".
    Cluster manager integrity check failed.
    Checking cluster integrity...
    Cluster is divided into 2 partitions.
    Partition 1 consists of the following members:
    Node Name
    node1
    Partition 2 consists of the following members:
    Node Name
    node1
    node2
    Cluster integrity check failed. Cluster is divided into 2 partition(s).
    Checking OCR integrity...
    Checking the absence of a non-clustered configuration...
    WARNING:
    CSS is probably working with a non-clustered, local-only configuration on nodes:
    node1
    Verification will proceed with nodes:
    node2
    Uniqueness check for OCR device passed.
    Checking the version of OCR...
    OCR of correct Version "2" exists.
    Checking data integrity of OCR...
    Data integrity check for OCR passed.
    OCR integrity check failed.
    Checking CRS integrity...
    Checking daemon liveness...
    Check: Liveness for "CRS daemon"
    Node Name                             Running
    node2                                 no
    node1                                 yes
    Result: Liveness check failed for "CRS daemon".
    Checking daemon liveness...
    Check: Liveness for "CSS daemon"
    Node Name                             Running
    node2                                 no
    node1                                 no
    Result: Liveness check failed for "CSS daemon".
    Checking daemon liveness...
    Check: Liveness for "EVM daemon"
    Node Name                             Running
    node2                                 no
    node1                                 yes
    Result: Liveness check failed for "EVM daemon".
    Liveness of all the daemons
    Node Name     CRS daemon                CSS daemon                EVM daemon
    node2         no                        no                        no
    node1         yes                       no                        yes
    Checking CRS health...
    Check: Health of CRS
    Node Name                             CRS OK?
    node1                                 unknown
    Result: CRS health check failed.
    CRS integrity check failed.
    Post-check for cluster services setup was unsuccessful on all the nodes.
    Please help.

    Thanks for the answer.
    Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
    You can see that cluster is not healty from cluvfy output.
    When I tried to start crs whith crsctl start crs but:
    - on node2 none of the demons starts (CSS, CRS or EVM)
    - on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
    Problem 2: Cannot change OCR location
    node2:root$ cat /var/opt/oracle/ocr.loc
    +#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
    ocrconfig_loc=/dev/rdsk/c7t30d0s3
    local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
    PROT-1: Failed to initialize ocrconfig
    node1:root$ cat /var/opt/oracle/ocr.loc
    ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
    local_only=TRUE
    node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
    PROT-1: Failed to initialize ocrconfig
    Problem 3: On node 1 I wrongly issued a command
    node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    Configuration for local CSS has been initialized
    Adding to inittab
    Startup will be queued to init within 30 seconds.
    Checking the status of new Oracle init process...
    Expecting the CRS daemons to be up within 600 seconds.
    Giving up: Oracle CSS stack appears NOT to be running.
    Oracle CSS service would not start as installed
    Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started

  • Game does not start after installing on mac pro

    Game does not start after new install on mac pro ?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My iPhone4 does not start after it was out of charge and recharged again?

    My iPhone 4 does not start after it was out of charge and recharged again?

    Hi Svedjot,
    Welcome to the Support Communities!
    The following article will provide some troubleshooting steps for this issue:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    Cheers,
    Judy

  • 16 GB x-Fi Style - does not start after charging

    Hi,
    4 weeks ago I bought my x-Fi style and used it during my holidays for 2 weeks. After charging the player only twice (USB-connection with notebook), it now fails starting. Maybe there is an internal temperature fuse to protect from overheating and I only have to wait to try again? After connecting to USB the CREATIVE sign appears but disappears directly and a battery symbol appears and remains on the screen. After disconnecting the player does not react in any way. I already tried to reset but cannot start it again.
    Can anyone help me?
    Cheers,
    Uli

    Re: 6 GB x-Fi Style - does not start after charging:Just fyi
    I found the website for Creative to be very frustrating. Not one snail mail address or corporate headquarters info. The link for website feedback didn't work and one other customer service link was a dud. They clearly don't want to be 'bothered' with complaints, or anything positi've for that matter!
    But, I searched on the forum and found a three-year-old post about someone who was frustrated with having to carry around a paperclip to always push 'reset' on his X-Fi -- and the light dawned! Didn't know I had one of those. I pressed reset and voila! it is working again. Still had to charge it, but it accepted the charge this time and I was able to finish my book and move on to the next. Now, the next problem is I tried to access my wireless network which has a $ in the password and there is no $ in the choices for entering a password. So, now I have to change the password, change all of my device passwords (Blu-Ray, iPad, laptops(2), friend's laptops, etc. a huge pain. Seems to me they could have included a $ in the choices!

  • My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    Hy myneck,
    Happy Holidays!  The resource below may provide some steps to try if your MacBook Pro won't start.
    Troubleshooting: My computer won't turn on - Apple Support
    http://support.apple.com/en-us/TS1367
    This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
    You don't hear a startup chime.
    You don't hear any fan or drive noise.
    There is no video on your built-in or external display
    If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
    You may hear a startup chime.
    You may hear fan or drive noise.
    You may see a light from the Sleep LED (if your Mac has one).
    Pressing the Caps Lock key on the keyboard causes it to light. 
    If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter. 
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    I hope this information helps ....
    - Judy

  • Does not start its download.

    Good day,
    I'm sort of new to the buying of apps in the Apple Store and so I just bought this OS X Mountain Lion and the buying of the app was a success. Although, it does not start its download. As far as I know, our internet connection is perfectly fine (because I'm able to write this discussion on mine) and that I can surf the net. I am aware that the download does take a long time, like 3 to 4 hours? But nothing seems to be happening...
    Anyone here had the same case that I am currently having?
    Thank you!

    The download time, is governed by your internet connection and speed.  If you are connecting to the internet wirelessly, then it would take much longer than if you were directly connected with a wire. 
    If you feel it may be "stuck", quit all open applications, and restart your computer from the apple menu.  Once the computer is restarted, re-open up the App's store, and select the purchases tab, then resume the download.

  • Movies does not start to download

    When i rent or buys a movie at Itunes, the file goes into wait mode and does not start to Download.
    Anyone that can help me??

    @FLTAron, were you able to resolve your issue, 'cause I am facing  exactly same issue

  • The Connection Server does not start after an upgrade to BO4.1 SP3

    Hello guys,
    The Connection Server does not start after an upgrade to BO4.1 SP3
    We are in process to upgrade our Business Objects environments to BO4.1 SP3
    The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
    When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
    Our OS is AIX
    Uncaught Exception in SilentScope: [CS] Ser
    verInitialization::InitManager::Initialize: 0.007^^
    The CS initialization failed within the CS server. Aborting
    trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
    Gerd

    Hi Amine
    The File seems ok
    File from the failing connection server
    -rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
    File from our test system
    -rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
    I created a new connectieserver(by the copy function), but the new server won't start.
    Regards
    Gerd
    Log
    |89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
    init_srv.cpp:95:-: TraceLog message 3
    |4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
    |77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting.

Maybe you are looking for