.Exe file disappearing after use Windows 7

So I have a .exe in a folder that after opening the .exe and closing it again, (It's a Ren'Py game), the file disappears.
If I try to extract the game again (It's in 3 zips) into the same folder I get Access Denied from the .exe. It is not a virus, my antivirus hasn't reported doing ANYTHING to a file or folder (I even manually scanned it and it said it was fine). I've set the
permissions to full access, and I'm the owner.
I have no idea why it is doing this. Anyone have any suggestions?

Can you try a different product and check ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Similar Messages

Export file disappears after exporting

Export file disappears after exporting
Tried dataexport(calc script), report script,need du=ynamic calc members too..
its urgent now....please help
But I have lots and lots of dynamic calc members...its huge...will take hours together to change...so I planned to make stored for only those members which are required in export file...but now...It seems that default calc is not getting executed... may be that happened because I changed few member properties...
Any thoguths why now dynamic calc is not working?
Thanks a lot for any help..its really urgent now...

Regardless of which limited export process you are using (dataexport calc script, report script, or MaxL/Esscmd export) I can't imagine the export file disappearing if it in fact gets written out at all.
As rinku wrote, if it's a true Esssbase export it's either in the app folder or where ever you wrote it with MaxL/Esscmd.
There are known issues with dynamic calc and dataexport. I've seen this myself and ultimately gave up on exporting the dynamic members. Yes, your changes could cause your exising aggregation scripts to give different results.
How about this:
1) Reduce scope of export process and remove dynamically calculated Accounts/Periods (a guess on my part, but likely right)
2) Export to known location (app folder under Essbase folder or some server-addressable folder). Btw, how are you doing the export? It wasn't clear from your post, but I guess it doesn't really matter.
3) See if that works, and if so, expand until failure. That will tell you what is and isn't going to work.
Regards,
Cameron Lackpour

Music disappeared after using Syncios

Some tracks in the default Music app disappeared after using Syncios (http://www.syncios.com/) with my iPhone.
What I did:
I opened Syncios 4.1.1 with the iPhone 5 connected. Per the recommendation, I did not use iTunes at the same time.
Details:
Syncios 4.1.1
iPhone 5
iOS 8.0.2
Windows 7
Could someone please advise on how to recover the disappeared tracks and how to prevent this issue in the future?
I've also contacted Syncios support but in the meantime am wondering if anyone here can help.
Thanks!

I also wanted to note that the tracks that disappeared appear to have been downloaded from the cloud. So I can re-download those tracks, but if anyone knows how to prevent this issue in the future, your input would be much appreciated.

Do my files disappear after the 30 trial of Acrobat Pro?

Do my files disappear after the 30 trial of Acrobat Pro?
Thank you,
Ed

No. You just can't use Acrobat on your computer anymore (unless you buy it,
of course).

Release strategy of contract disappeared after using of MEMASSCONTRACT

Hi All,
May be some one can help me?
I have next problem it tr. MEMASSCONTRACT(ECC6)
Release strategy of contract disappeared after using of tr. MEMASSCONTRACT. I know why it happened, but I don't know how to correct it. Some time ago IN ECC5 we added a field to a table EKKO and used this field as one of characteristics in the release strategy of contracts. In order to transfer value of this field to field CEKKO-USRC1 we used User Exit EXIT_SAPLEBND_002. This User Exit is suitable only for online transactions (ME31K, ME32K). How can I feel field CEKKO-USRC1 in transaction MEMASSCONTRACT?
Regards, Liza

Thank you. Probably I didn't explain my problem clearly. It's section of code from User Exit EXIT_SAPLEBND_002:
ATA: reference(20) TYPE c VALUE '(SAPMM06E)EKKO'.
DATA: it_ekko TYPE ekko.
FIELD-SYMBOLS: <ymm_icl> TYPE ANY.
e_cekko = i_cekko.
*THE "ICL Contract" FIELD IS ONLY RELEVENT IN THESE TRANSACTIONS
IF sy-tcode EQ 'ME31K' OR sy-tcode EQ 'ME32K'
OR sy-tcode EQ 'ME33K' .
ASSIGN (reference) TO <ymm_icl>.
it_ekko = <ymm_icl>.
e_cekko-usrc1 = it_ekko-ymm_icl.
ENDIF.
Program SAPMM06E can only be reffered while using online transactions. Mass transactions does not use these program and it is completely class based. So, may be someone know how can i do the same , but for tr. MASS in ECC6.

Unwise.exe Files not run on Windows 8.1 SSSS

So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
what should i do?
Reply Please!

So unwise.exe Files not run on Windows 8.1 I Tried too! much but when i run it , it will not open i also tried To run as Administor but not works i am downloaded GTA San Andreas Admin console for my GTA San Andreas that one was unwise.file its not opening
what should i do?
Reply Please!

Why do the rulers (cmd R) disappear after using Print (cmd P) ?

Why do the rulers (cmd R) disappear after using Print (cmd P) ?

If you are referring to Pages v5.2.2 on Mavericks, or v5.5.1 on Yosemite — the rulers do not disappear in the Pages document when using the Print (cmd+P) keyboard shortcut. The document horizontal rules are temporarily obscurred by the drop down print dialog sheet.
I observe no evidence of disappearing rules unless they are forced via the cmd+R keyboard shortcut.

Don't able to download file to local using window pop-up with IE

Dear all,
I am working in web dynpro for java, i want to download file to local using window pop-up , here is my code :
IWDResource resource = WDResourceFactory.createResource(blacklistData.getBytes(), allblFilename, WDWebResourceType.TXT);
IWDWindow window = wdComponentAPI.getWindowManager().createNonModalExternalWindow(
resource.getUrl(WDFileDownloadBehaviour.ALLOW_SAVE.ordinal()));
window.show();
It runs in Firefox browser very well, but IE can not run. :(. How to resolve my problem ?
@Note : version Firefox is 3.6, IE is 8.0
Thanks.

Hi Soledad
Please check browser compatibility of the webdynpro iview for server version.
Refer to Product Availability Matrix : [http://service.sap.com/pam|http://service.sap.com/pam]
Best Regards
Arun Jaiswal

Bought a new Sony Vaio Windows 7. After using Windows easy transfer Adobe X will not open.

I purchased a Sony Vaio laptop and after using Windows 7 Easy Transfer, Adobe X will not open. I have tried uninstalling and reinstalling a number of times with no resolve. I get a nessage that says Adobe has stopped working and a further message that says Incompatible application

Did you already try to delete the photo cache? iTunes: Understanding the iPod Photo Cache folder

Backed up files partially disappear after restore (Windows Server 2008 R2 - Windows Server Backup)

Dear all,
I am experiencing a problem with "Windows Server 2008 R2", using Windows Server Backup.
Here's my setup:
Server: RAID 5 Disk setup
Backup:
By using Windows Server Backup (within Windows Server 2008 R2), C: and D: were fully backed up, with "System State" and "Baremetal Recovery" options selected. Backup went okay without any errors.
Restore:
By using Windows Recovery Environment (booted from Windows Server DVD), C: and D: were fully restored to the original partitions with "System Recovery" option found within Windows RE (without re-formatting partitions during restore). Restore
went OK without any errors. Rebooted, and system has been running fine.
Problem:
After the restore, the system itself seems running OK; no BSOD, no crash, no visible errors.
However, our client insisted some files (around 6 to 7) which are related to the propriety software has "disappeared" right after System Recovery.
Question:
Since Windows Server Backup is using "Volume Shadow Copy" technology which enables "live backup" of the running system, is it possible that some files will disappear (=restore error) after
System Recovery?
I cannot really find any errors or warnings related to Windows Server Backup in the event log, through. No Windows-backup errors. No VSS errors, too.
Do anybody have experienced this kind of problem in the past? Any suggestion will be greatly appreciated.

Thank you for your reply, Ms. Mandy.
To make things clear, let me explain to you briefly:
1. The "missing data" was backed up with "full system backup".
2. After a system restore from the above backup image, as you mentioned, partitions has been overwritten with the partions' backup data in the Backup Data Set taken by Windows Server Backup. No error with backup. No error after restore, and reboot - system
has been running fine.
3. Although there was a report that the affected files(about 7 java exectables) were missing after the above restore operation, other aspect of system was running fine at the time of the report.
4. I have checked the original backup data set - and voila, there ARE files which seems to gone after restore.
5. When I used Windows Server Backup "on" Windows Server 2008 R2 normal environment (= NOT Recovery environment from DVD) and selectd ONLY these affected files to restore, these files could be RESTORED successfully, without any errors. SO... data
was property backed up.
> The recovery will overwrite the partitions so files created after the backup point will be missing.
I understand, and this is not the case this time, because the affected files are already present in the backup data set (= I have mounted the backup data as VHD, and I could clearly see them present in the mounted VHD file)
Plus, these files are completely restoreable via "selective file restore" in Windows Server Backup.
Things I want to know/confirm:
> The recovery will overwrite the partitions
If I understand this correctly, in case that the files in question are already present in the backup data set, these files SHOULD be restored after full system restore, right? (If these files could not be restored, Windows Server Backup SHOULD show some errors.)
What do you think, Ms. Mandy? :)
Jo

.exe file disappears immediately after publishing, i cant publish. It only happens with 1 project.

I just spent a long time doing work, hit publish to check it out and i cant find the published file. I publish again but watch the folder and the .exe published file appears but then immidiately disappears after its done publishing. Other projects seem fine. I have no idea what to do, i tried copying and pasting my .dir file and opening the copy and publishing it but the same thing happens.
Please help. Thanks.
edot: apparently deleting one of my .png images from the cast, even though it was never used, seemed to fix it mostly. I get permision errors sometimes though.

If you'd like to contact me offline ([email protected]), I'd be happy to look at the file.
Dean

Quicktime X file disappear after convert it.

I have a video on .mp4 format, open it on Quicktime X then use the "save as" option to convert this file to an iPod format. Usually takes about 30 minutes. The weird thing is that if I leave the computer running the process and get back later, the file disappears.
When the conversion starts generate an icon on the desire destination. But apparently if you don't manipulate the file right after the conversion is done the file just disappear.
Does anyone had the same problem before? Any Idea how to solve it?
The thing is that I don't want to sit in front of my computer to wait until the conversion is done, just upload several video and used them once they are all ready.

Hi Brian
thank you so much for your help !
I still don't fully understand waht really happned...
But I think the problem was solved...thanks to you.
I firstly tried to do exactly what you suggested: Exported the project as QT, then quited FCP, dragged the file into Compressor's Batch window, told the compressor to make a MPEG2 frm it... and here it stoped working...Submit ws subdued and I could not make it work...Then I took a look at the file QT had exported...it was a 303Mb FCP movie, not a QT.mov file, and the sequence was about 4.5 Gb !
Here I tried something else:
First, from FCP, Printed the sequence to video. Then captured it to FCP again to a new project, through Log and Capture, this time it did not need rendering and in the Capture Scratch folder after saving the new project was a QT.movie file; Dragged it to Compressor and made a MPEG2 file...
On the phone with the project's author I heard for the first time the original QT.mov files he gave me were in fact exported from iTunes under MacOS 9.2...I don't know if this can mean anything, since I have worked before with QT files exported from iTunes with no problem...
Can you please give me your insight about all this ?

Suspicious files detected after clean windows 10 installation

Hi
I scanned my computer after clean windows 10 installation and found three suspicious files and i'm confuse should i remove it or not. The files details are below.
Emsisoft Emergency Kit - Version 9.0
Last update: 25/03/2015 07:40:59
User account: Addison
Scan settings:
Scan type: Custom Scan
Objects: Rootkits, Memory, Traces, C:\
Detect PUPs: On
Scan archives: On
ADS Scan: On
File extension filter: Off
Advanced caching: On
Direct disk access: Off
Scan start:   25/03/2015 07:43:00
C:\Program Files\WindowsApps\Microsoft.Cortana_1.4.2.152_x86__8wekyb3d8bbwe\dndactionurihandlers.dll    detected: Gen:Variant.Renos.38 (B)
C:\Windows\System32\omadmclient.exe    detected: Gen:Variant.Graftor.6200 (B)
C:\Windows\WinSxS\x86_microsoft-windows-d..agement-omadmclient_31bf3856ad364e35_10.0.10041.0_none_7aacbb6a819e253e\omadmclient.exe    detected: Gen:Variant.Graftor.6200 (B)
Scanned   138054
Found   3
Scan end:   25/03/2015 08:03:27
Scan time:   0:20:27

Addison
You can confirm whether or not these are malware by running a second malware app (Malwarebytes) I suspect they are not and are just false positives
Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.
http://www.malwarebytes.org/products
Wanikiya and Dyami--Team Zigzag

How can I print multiple PDF files at once using Windows 7?

How can I print multiple PDF files at once, on an HP LJ Pro 400 xcolocr printer without opening each
one separately using Windows 7?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Fields disappear after using the Reduce size save in X pro

My many form fields literally are gone after doing a save as>Reduce File Size command in the new Acrobat X Pro.
I have many pages that I have anywhere from 30 to 50 interactive fields to fill in, I had tested the forms closed the file reopened and then because the file size was a bit more than I have seen in the earlier version of Acrobat, so I used the Save as>Reduce file size command on all my pages after seeing in the folder that my interactives went from 1050 KB to around 500, so I did every form one after the other.
Well when I went to start loading them in to FTP and testing them after placing on the web when clicking on the PDF it has no fillable fileds, well I thought what, so I opened that same file on my computer and nit came up the same, and the last thing I had done before starting to upload was to do the Reduce File Size command.
To have all my fields wiped out like this is crazy, I have no way to recover them from what I can tell, unless Adobe has a miracle fix, which I'm hoping.
I can't find any setting that says it removes form fields upon save!
Can somone tell me what has happened and maybe why, I have doing these type forms for years and have never had this happen, I'm Wary of this new Acrobat, I can't see the old history menu, where you could see pdf's that you created a month ago or more. Why does that screen stay on in the center of the program all the time, most of those have a close box that you can get rid of it. Is there a way to turn on the old 9.0 menus everywhere, and can you move the right side column to the left side somewhere, it just is easier for me to use.
Things seemed to work relatively good in the old version, why some many drastic changes, it ends up slowing my production down, and now i'm behind on my work load.
I'm all for improvments, but really why change everything, it seems counter productive even for Adobe, unless someone is trying to justify their employment.
I apologize really frustrated here.
Any help to recover would be great.

Thank you LoriAUC, it was definitely the Reduce File Size command. Although I have used the Optimizer in the past in older versions of Acrobat I did not use it in this case.
I have been doing this exact same work with Acrobat from the days of Live Cycle or what ever it was called, and just a few weeks ago I was creating the same interactive's using the same files for a different client, using the Acrobat 9 pro I believe in the built in "Forms" builder.
I think where I may have screwed up is I had always done my Reduce File Size before I made the form interactive, this time I happened to see that each page was over 1 MB and I know that the non-interactive version that I also post on our website is more like 200 KB, so when I saw that they were over 1 MB, I decided that I was going to use the Reduce File Size after I had finished all of my 13 pages of interactive's.
I did not think to check the first one to see that the interactive was still functional, and proceeded to change all of them by quickly opening doing the save as reduce file size and then closing, and it took a whole 3 minutes to undue/ ruin the hours of building the pages with the 30 to 50 field areas that were interactive.
I don't wish to replicate it right now, but I will attempt a test with some made up test files to verify when the deleting of the fields took place, because there was data in the fields, but it was now flat and when you click on the edit in forms, it asks if you want to have the wizard place fields because no fields are in the document, or something to that effect.
I will let you know the outcome of my experiment.
If you come up with any other info I would be very interested.
Thanks again for the help.
Sincerely,
Omnia Guy

.Exe file disappearing after use Windows 7

Similar Messages

Maybe you are looking for