.exe file disappears immediately after publishing, i cant publish. It only happens with 1 project.

I just spent a long time doing work, hit publish to check it out and i cant find the published file. I publish again but watch the folder and the .exe published file appears but then immidiately disappears after its done publishing. Other projects seem fine. I have no idea what to do, i tried copying and pasting my .dir file and opening the copy and publishing it but the same thing happens.
Please help. Thanks.
edot: apparently deleting one of my .png images from the cast, even though it was never used, seemed to fix it mostly. I get permision errors sometimes though.

If you'd like to contact me offline ([email protected]), I'd be happy to look at the file.
Dean

Similar Messages

A day ago, my phone was freaking out, saying all these apps had stopped working, so I turned off and immediately after turning it off the dual core screen with the red M came up and wont turn back on-

A day ago, my phone was freaking out, saying all these apps had stopped working, so I turned off and immediately after turning it off the dual core screen with the red M came up and wont turn back on…

http://www.verizonwireless.com/support/knowledge-base-26502/
Above if battery pull/soft reset doesn't help. If it's boot looped may need new equipment

I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with car, its working fine, how 2 resolve ?

I am a proud owner of iphone5, iOS6.1.4, recently I am facing prob to connect it with Ford Figo. Its not that iphone is not connecting, its getting disconnecting immediately after connected. I hv tired other ph with same car, its working fine, how 2 resolve ?

Morning Indrajit Chatterjee,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Best of luck,
Mario

Tried bit alas did not help. It's too much of a coincidence that I got download then problem immediately after.Still think its Apples fault.Only about 4 of every 10 e mails affected!!!!!

Tried bit alas did not help. It's too much of a coincidence that I got download then problem immediately after.Still think its Apples fault.Only about 4of every 10 e mails affected!!!!!

I'd suggest you follow up in the thread you started in regards to the problem rather than starting new topics:
https://discussions.apple.com/message/24982409#24982409
If you start a new topic part way through discussing an issue, people don't know what you're referring to. It's also consider impolite to post all in caps in Internet forums, as using caps is considered to be shouting.
Regards.

Why does a saved hotmail message disappear when I click on "continue to create the message? It only happens with Firefox, not with Explorer.

Why does a saved hotmail message disappear after I click on "continue creation the message? It only happens with Firefox, not with Explorer.
== This happened ==
Every time Firefox opened
== A few weeks ago

Hello Helena.
You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?

I'm trying to transfer a quicktime file, when I drop the file in my hard drive I get the following error message "The operation can be completed because an unexpected error occured (error code 0). It only happens with this particular drive.

I'm trying to transfer a quicktime file, when I drop the file in my hard drive I get the following error message "The operation can be completed because an unexpected error occured (error code 0). It only happens with this particular drive.

Run Disk Utility and try to verify/repair the drive to see if it reports and fixes anything.

How do I return to OSX 10.7.3 after update. I´ve have only troubles with 10.7.4 update

How do I return to OSX 10.7.3 after update. I´ve have only troubles with 10.7.4 update

You can only "downgrade" if you wipe (erase) your hard drive. So, if you made a bootable clone or have an up to date Time Machine backup with 10.7.3, you can boot from the bootable clone, erase the internal drive, and clone your old system back. Not 100% sure about the steps using Time Machine since I don't use it,but there are excellent articles available which I can link to.
As far as I know, the problem with installing an earlier version would be that once you check Software Update, you can no longer choose to download a Combo update of a different/earlier version since Lion is only available through MAS. So, if you check it, it will most likely only offer you the current/latest version.

.Exe file disappearing after use Windows 7

So I have a .exe in a folder that after opening the .exe and closing it again, (It's a Ren'Py game), the file disappears.
If I try to extract the game again (It's in 3 zips) into the same folder I get Access Denied from the .exe. It is not a virus, my antivirus hasn't reported doing ANYTHING to a file or folder (I even manually scanned it and it said it was fine). I've set the
permissions to full access, and I'm the owner.
I have no idea why it is doing this. Anyone have any suggestions?

Can you try a different product and check ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

_All_ Files Disappeared in After Effects!

CS3 After three days of work over the weekend, I was loaded a AE project back on a USB drive so I could take it back to work with me tomorrow. The piece is a 35 second animation...maybe two or three dozen layers. (The strange thing is that the last comp which I exported was over a gig in size.) The transer to the USB drive was going slowly, so I canceled it.
Much to my surprise, all...I repeat...all of the files disappeared. All the project had was a name in AE...no files...no timeline...no nuthin'.Like I have just created a new project. The project remembers that it used files in the File/Open Recent Files but there is no trace of the timeline
Is there a way of retreiving a previously saved version? Help! Got to get this done for a major presentation. Thanks in advance.

Thanks for your reply.
It seems I did not make myself clear. I was not using a USB stick drive. I was using an external hard drive which was connected by an USB connection. I have two external hard drives which I use. One is a normal external hard drive with an USB connection. The other hard drive is a USB docking station into which I can put various hard drives.
You mention the possibility of an autosave version. Do you know where these might be found? I have looked and there is no obvious location.
I have never lost _all_ files in a video editing project.

Adobe Standard version 11:adobe.exe file disappears

I just installed Adobe Standard 11 on my laptop. I put in the license number. It works once and then when I try to start it again I get an error message saying that the adobe.exe file cannot be found. I looked in the registry and the adobe.exe file is not there.

Is the message definitely saying, exactly, adobe.exe ?
Why would you look for the file in the registry?

Hi my iTunes exe file disappeared and when I went through the troubleshooting it said to set up a new, which I did. I have had nothing but pain and grief since doing so?

Hi
I'm just about to pull my hair out with iTunes!! Hvaing been through the troubleshooting soooooooo many times
it said to set up a new iTunes which I done but now it's saying iTunes is an incompatable programe???
The update 10.5 has created more grief as I cant sync my iPhone to my iTunes I have tried the file sharing as
I can't update anything but that's greyed over and I can't tick it?
Every time I open iTunes it opens then doesn't respond, so I have to close and reopen several times and
eventually I can play a tune at least, which I guess is what keeps me going ......... hahaha
Any help would be appreciated!
Thanx heaps !!

We don't work for Adobe. We are just users.
You'll want to take this to the proper forum for that product at Adobe PDF Pack (read only)
Good luck.

NALVIEW.EXE quietly dies immediately after applying MS KB2286198 (LNK-Flaw)

Hi.
ZDM7.0.1_HP4, WinXP-SP3, KB2286198 (MS10-046)
Some users recognized, that the Application Explorer doesn't show up any more.
When starting NALVIEW.EXE manually, I can see, that it flickers for 1/4 second or so
in the systray, than it dies quietly.
When backrev'ing to an imaging state before applying that MS patch, it's working
fine.
Just applying that patch[1] immediatly breaks the startup of NALVIEW.EXE.
This is fact for the majority of the PCs on this site, those affected are HP6005 PCs
with the same installation (ZEN-Image).
Anybody else facing this trouble?
Regards, Rudi.
[1] WindowsXP-KB2286198-x86-DEU.exe

Hi.
Uninstalling KB2286198 does *NOT* turn NALVIEW.EXE to be working again.
Checked the ZEN image (without that patch) again: It's working fine.
It's so nice... !
I'll go on checking the day after tomorrow. (offsite tomorrow)
Regards, Rudi.

D/load notifyer disappears immediately after d/l

I d/load a program and usually a notifying menu appears showing the d/load progress.When the d/load finishes I d/click the file and it installs now after the d/load it vanishes and nothing appears on the d/top,although it shows in the control panel.HELP

Downloads Ctrl+J, problem with downloads Window not appearing or closing
*https://support.mozilla.com/questions/865687
Downloads not visible in Download Manager - MozillaZine Knowledge Base
http://kb.mozillazine.org/Downloads_not_visible_in_Download_Manager
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

MacBook Pro doesn't wake if left asleep too long; sleeps immediately after boot; SMC Reset / NV Reset only temporary fix

I've tried hard to find someone else with these symptoms, and nobody seems to have a complete answer.
After upgrading my 2008 MacBook Pro to OSX Lion, these problems began.
Whenever I leave the lid closed for too long - not entirely sure how long, but the longer I leave it the more likely this is to happen - it refuses to wake when I open the lid. The power light will brighten, as if it were about to wake, and sometimes the screen will flash, but then it will all go black, power light and all.
At this point I press the power button, and the power light briefly flashes, and then the macbook seems to 'really' turn itself off.
Then I press the power button again, and it begins to boot. I enter my FileVault 2 password, and the apple logo and spinner appear, but as soon as the graphics driver kicks in (or whatever it is - the point when the shades of grey suddenly change and the brightness automatically adjusts) suddenly the mac goes straight to sleep immediately, and we're back to the same symptom as before.
It will do this repeatedly through a 2nd, 3rd, etc power cycle.
Resetting the SMC doesn't seem to help.
I have managed to get the macbook to boot normally by clearing the NV Ram, and also by booting into single user mode and immediately shutting down and rebooting. But this does not solve the problem, it merely lets me boot one more time.
Any thoughts appreciated, it's driving me mad, not to mention losing me work.

Anyone? Is there really nobody else who's seen similar symptoms?
I'm still experiencing this. I've discovered that booting into Recovery Mode usually works first time, but this doesn't help with my wake-up-from-sleep problem.

Firefox will not open unless I run it in compatibility mode (Windows XP SP 3), run it as an administrator, or launch it immediately after a reinstall (the reinstall thing only works once.) How do I fix this?

This morning, Firefox crashed. After this, when I click the Firefox icon, the hourglass appears and then nothing happens. Firefox does briefly appear in the task manager when I do this.
I tried rebooting. I tried reinstalling multiple times. (Firefox will run when I select "Launch Firefox" from the installer. Then the problem occurs again.) I tried safe mode. I have found that Firefox will work if I select Windows XP compatibility mode from the icon properties menu or if I run the program as an administrator. When I do this, Windows asks me if I want a program to be able to make changes to my computer.
I have noticed that a Windows Error Report is being generated each time Firefox will not open.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

.exe file disappears immediately after publishing, i cant publish. It only happens with 1 project.

Similar Messages

Maybe you are looking for