EXE published Captivate File in window 7 throws error message

Hi Guys,
I have been struggle with this problem for a couple of days.
My setup:
Window 7 Professional with two account set up.  One is as Adminstrator, and the other one is the standard user account
UAC is turned off so it does not ask me to run the app with adminstrator rights.
My company will not allow flash.  Thats why we have to use the EXE file...
The exe file runs fine under adminstrator account.  But when I try to open it under the standard user account, it gives the following error message.  This message will keep appearing when I click on the exe file.  I am pretty sure the exe is probably trying to access some folder for read/write access and the standard user account is not allowing it to do so.  Any help would be very grateful!

I have been delivering courses in the .exe outputs offline for CD delivery and have had many end users using it on a variety of computers with most people accessing it with non admin rights. Still, no one has complained of similar or any other issue yet. There was an issue with Captivate 4 for which a patch was provided later that used to deal with the fakeflash file somewhere in the captivate folder, and the interesting thing was that the .exe didn't use to work on those computers only that had captivate 4 installed.

Similar Messages

  • I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

    I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged.  To create a PDF document, go to the source application then print the document to .pdf"  I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file.  After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared.  How do I resolve this problem?

    I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
    the log says the bellow details...what's the problem and how can i resolve it? thanks.
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[Page: 2]%%
    Cambria not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: show ]%%
    Stack:
      %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

  • ITunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times.

    iTunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times. Please help.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • Trying to log into firefox but keep getting firefox is in offline mode and can't browse the web, I've unchecked the work offline in the file menu but still get error message...

    trying to log into firefox but keep getting firefox is in offline mode and can't browse the web, I've unchecked the work offline in the file menu but still get error message...

    The work offline option can be found from Firefox button -> Web developer or from the menubar toolbar -> Work offline (Or at least thats what happens in Windows).
    Have you any other reason for being offline; router off, firefox not dialing up or whatever. Or is security software or a firewall blocking firefox, or a network connection, or firefox setting etc set wrongly.
    See also
    *[[cannot connect after upgrading firefox]]
    *[[options window - advanced panel]]
    * [[error loading web sites]]

  • Trouble opening a just created Pages file.....error message says I need a newer version of Pages......Apple Store says I have version 5.0.......opening an older Pages file it says I have version 4.3.......can not find any way to try another upgrade to 5.0

    Trouble opening a just created Pages file.....error message says I need a newer version of Pages......Apple Store says I have version 5.0.......opening an older Pages file it says I have version 4.3.......can not find any way to try another upgrade to 5.0........please help......
    Thanks

    Personally, I would not recommend deleting/removing the iWorks 09 folder for several reasons: one is that the new versions have had several functionalities removed and until you decide that you can work with the new one and do not miss any features the older version had, I would leave the old one in place. Personally, I will not be using the new versions.
    The second reason is that you can accomplish what you want using a different approach: simply open a Get Info window of your document and choose which version of Pages you want this to open in - you can also stipulate that all docs like this are opened with whichever particular version.
    FWIW: Once you have edited an old document in the new Pages version, you can no longer open it in the older version. However, you can still export it to the old version.

  • Sync throws error message -48 (unknown error)

    Synch throws error message and then does not synch music.

    I'm having this same problem. In my case the library file is on my main internal hard drive, but is partitioned to the e: logical drive. Permission should not be a problem.

  • Windows Blue Screen Error Message Appears As Soon As IPod Connected

    Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

    Hi Mike thank you for replying,
    I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
    I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
    If you can help me out or suggest where to search it would be much appreciated.
    Thx

  • When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later".

    When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.

    I'm getting the same problem with both my IPad 4 and iPhone 5
    Just started a few weeks back, Since then I have had two Itunes updates.
    Is this something Apple is aware of and trying to fix?

  • I-tunes won't download onto Windows XP.  Error message 'this application package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a a valid window Installation package'.

    How do you download i-tunes onto Windows XP when error message occurs, 'This application pack could not be opened. Verify that hte package exists and that you can access it, or contact the application vendor to verify that this is a valid window installation package'.

    I wish I knew because i'm having the same problem. As soon as I find the answer I will post.

  • Dv6 Notebook "Black Screen" following "Windows Blue Screen" error message. Caps Lock blinking!

    I have a HP DV6 notebook. I left my computer on overnight and the next morning I woke up to find a Windows Blue Screen error message. It said to restart my computer. I was in a rush so I just closed the lid. When I returned I opened the lid and the screen was black. I pressed the power button to restart it and I haven't been able to restart it since. I now have a power light, a black screen and the CAPS LOCK light is blinking twice then a pause! Please help!

    Hi btgclark,
    I understand that you are having an issue with turning on your notebook and the CAPS LOCK light blinks twice and then pauses. The following document 'Computer Does Not Start and the LEDs Blink or the Computer Beeps' will walk you through the steps that you need to follow. For your error code, it means that the BIOS has a corruption failure. This document will walk you through the necessary steps to get this resolved.
    If for some reason this document does not resolve the issue please provide me with the model number to your notebook. I have included a document 'How Do I Find My Model Number or Product Number?'
    Please let me know how this works out for you, thank you.
    I worked on behalf of HP

  • CM1312 NFP: WIndows 7: USB Error message ~"Lost Connection"

    With the 1312 connected to my Windwos 7 desktop, periodically Windows gives an error message that indicates that it has lost connection to the printer.  Unplugging and replugging the USB cable fixes the problem.  Otherwise the print & scan functions work perfectly.  Symptomatically it appears as if the printer goes to sleep and stops responding to whatever "keep alive" messages Windows might be sending.  Is there a setting in the printer, in Windows or in the printer driver software that can prevent this message?
    BTW, the other way to work around this problem is to just access the printer via the Ethernet but the scan funciton is not accessible via the network (an unfortunate limitation).

    aluniewski,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

    I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
    When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
    Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
    Please help!!

    I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
    I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
    I was afraid of rebooting and possibly losing track even of the ghost.
    I did not try EasyFind - I'll keep that in mind next time.
    Thanks for all the comments.

  • When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

    When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • In my computer some of the iTunes files got deleted accidently and I couldn't reinstall it . Evrytime I try torun setup file  I am getting this error message "C:\Users\Rif\AppData\Local\Apple\Apple Software Update\" ,appreciate if anyone can help me on th

    In my computer some of the iTunes files got deleted accidently and I couldn't reinstall it . Evrytime I try torun setup file  I am getting this error message"C:\Users\Rif\AppData\Local\Apple\Apple Software Update\" ,appreciate if anyone can help me on this pls?

    Even after deleting all files and folders from hard drive i am still getting this error!!

  • I tried to convert PDF file to Excel file and I got an error message no. 404

    I tried to convert PDF file to Excel file and I got an error message no. 404

    My question is related to Reader, which infrmation?
    The version is 10.0 and was downloaded?
    any other details?

Maybe you are looking for